Winter fun: how to make a snow slide. How to build a snow slide with your own hands for children and fill it with water? How to make an ice slide

Winter brings not only cold, but also new entertainment and experiences. Sleigh rides, skiing and ice skating are available. In order to give joy to your children, and to have some fun yourself, you should fill the yard with a snow slide. Before you figure out how to properly fill a snow slide, you need to understand where it is best to organize it. The chosen place should be safe, so that you can have fun and not worry about possible dangers. The selected area should be free of trees, bushes, manholes and other objects that could cause injury. There should be no roadway nearby.

How to fill a snow slide with water - dimensions of the slide, angle of inclination

The height and width of the slide will depend on the free area, the available volume of snow, and your capabilities. If the slide is made for crumbs, then you should not build a structure that is too high. Convenient indicators are the ratio of height to length 1 to 4. In addition to the descent, you will need to roll out. This is a flat plane along which movement will be carried out until the skater comes to a complete stop. When creating a structure, do not make the slope excessively flat or steep. At the beginning, the optimal inclination angle is -30-50. Next, as you descend, reduce the angle of inclination, you need to do this as smoothly as possible.

How to build a slide

To make the work easier, prepare large snow balls in advance. Lay out a wall of them, and fill the cavities between the balls with snow, use a shovel. Compact the resulting snow mass well. As a result, you will be able to build a descent, railings and other elements. To make your slide convenient to use, do not forget about the steps. Optimal sizes width – 40 cm. You can build low sides on the sides of the steps; it will be convenient to hold on to them when climbing the hill.

How to fill a slide with water

After you have built the snow structure and compacted it well, let it sit for a couple of days. During this time, the frame will be compressed and strengthened, which will allow it to be used until spring. Fill it up better evening when the sun sets and the temperature reaches -20C. If these conditions are not adhered to, the entire structure may “float”. Do not immediately pour the water out of the bucket; first, go around the entire perimeter with a spray bottle. Wait a couple of hours and proceed to the main filling stage, do it slowly. Use a little warm water. If voids form, immediately fill them with snow. When the slide has hardened well, go over the slide with a sanding board - this will make it slippery and smooth.

Using the information provided, you can easily create the coolest entertainment for your children. Show your imagination, work carefully and the result of your work will certainly please not only children, but also adults. Ice snow fun in your backyard is an opportunity for the whole family to have fun without leaving your backyard.

Step 1 Stock up on a shovel, a watering can, a mop and access to water, rubber gloves (you will put them on over regular, warm ones) and a wide metal spatula from the Everything for Repairs store. Select appropriate place for a slide: if the height of the slide is about a meter, then the length of the descent should be at least four meters, if the slide is higher, then the “roll-out” will be longer.

Step 2

Make a “base” for the slide: it can be assembled like a construction set from large snow globes(or even from hastily crumpled “piles” of snow), fill the gaps with snow and compact them tightly. Don't forget about the steps ( perfect solution- a couple of boxes for vegetables), and put a sheet of plywood on the top platform of the slide so that it is not so slippery. Place a snow border on the sides of the future gutter, along its entire length - there is less risk of falling off the hill.

Step 3

The most interesting thing: we fill the descent of the slide. It is better to do this in the evening so that the slide has time to freeze overnight. To do this, you will need warm water from a watering can, a mop or shovel, and a second builder: one will methodically splash water on the compacted snow, the other will immediately level it. Do not use a hose, otherwise it will be difficult to pour the entire surface evenly and layer by layer; just slowly water the snow from a watering can. When the slide takes on its usual shape, take a spatula and add the finishing touches: level the surface and make a smooth transition from the descent of the slide to the “roll-out”. Place snow patches on all holes and irregularities and level them again with a spatula. Pay attention to the “track”: pour it over and compact it too. Take a break for two hours and return to the slide again: the first layer will already freeze (or at least freeze slightly), and you can do all of the above again. Ice slide - traditional Russian fun

For construction we will need: a couple of large shovels, a lot of water and great mood. And also you can’t do this without frost, snow and several steam hands free.

Choosing a place for construction

First you need to determine the location for construction. It must be safe, that is, it must be located away from plantings, buildings and other objects that can be crashed into.

Determine the height, width and slope of the slide

The choice of height depends on the area on which the slide is being built, taking into account the length of the slide. If you are building it for kids, the slope should not be steep; on the contrary, make it gentle. For adults, the optimal angle is 40-50 degrees at the beginning of the mountain, and gradually reduce it, making it flatter.

Making steps and sides

The steps should be placed on the highest side of the mountain. Their width should be about 50 cm so that they can be lifted comfortably.

It will also be great if you make sides on the sides of the steps, 30 centimeters high. The same ones can be built along the edges of the slide itself, so that you can ride safely and not be afraid of flying out of it.

Let's sculpt a mountain

You need to start construction after waiting for a thaw. It is when the snow is sticky that you can easily make a snow slide. After this, the embankment must be compacted well.

Fill in

It is necessary to fill the slide in cold weather. This can be done with a hose or buckets. And the most The best way- an ordinary watering can. Once up the steps, pour carefully and slowly, trimming the surface to create a perfectly even coating. You can fill the slide using a large shovel or plywood, pouring water onto their surface, from which it will flow onto the snow. You can do this by covering the mountain with a huge rag - thanks to this method, the water will cover the mountain more evenly. Another way: collect snow in some container, mix it with a stick and evenly cover the mountain with this slurry. Where water holes have formed, fill them with snow and fill them again.

Finishing touch

Once the slide has been filled, leave it alone until the ice freezes. Then pour in the same way a few more times, leaving the ice to freeze. Do this until the layer of ice is perfectly even and leave the slide overnight. During this time, your structure should freeze even more and you can try riding. But before that, don’t forget to rub the steps with sand, and spill the slide with water again and let it sit for another hour. Another nuance - be sure to ensure that the transition between the descent and the ground is smooth.

Slide equipment

You can swim down the slide on bags, sacks, cardboard or rubber mats. But all these devices are not safe, because when descending on them you can get injured, as well as get frostbite or bruise your hands. For a faster, more convenient, and most importantly safe descent from ice slides, there are special equipment: ice cubes, tubes or cheesecakes.

Ice cream is special device for sliding down a plastic slide in the shape of a heart. This plate is very light and convenient to take with you on walks, and you can control it using the handle.

A tubing or cheesecake is an inflatable ring, similar to a life-saving ring, with an inflatable chamber inside and a bright-colored protective cover on the outside. It also has handles for the child to hold onto.

Bottom line

Skating down an ice slide is a well-known traditional pastime. Knowing all the nuances and rules, you can easily build such fun in your yard. A self-made ice slide can become the best gift to my beloved family for the New Year holidays.

Winter offers us sledding, skiing, ice skating and other fun activities. To give real joy to your own children, you should figure out how to properly fill a snow slide. Let's try to understand this issue.

Choosing a place to build a slide

Before answering the question of how to properly fill a slide, let’s find out in which places it is best to form it. It is recommended to choose safe areas. It is advisable that the slide be located away from trees and bushes, roadways, all kinds of drains and sewer hatches, deep ravines, and other objects that can cause injury during the descent.

It is better to choose a spacious area. The higher the slide is planned to be built, the more free territory should be available. Of course, going down a high, massive slide, the slope of which is made with all sorts of turns, will be much more fun.

Slide size

The width and height of the future structure will depend on the available amount of snow, reserve own strength and patience. If you plan to make a slide for very young children, don’t get too carried away. For the little ones, a structure of the most modest size will be enough. So what should the dimensions of the slide be? As practice shows, the optimal ratio of the height of the structure to its length is 1:4.

How to properly fill a snow slide with water? In addition to the descent itself, you will need to create a rollout. The latter is a flat, trampled and icy territory, along which sliding will continue for some time until it comes to a complete stop.

Tilt angle

When trying to figure out how to properly fill a snow slide, you should not make the descent too flat or, conversely, too steep. An inclination of 30-50° is considered ideal at the top point. Next, the height of the descent must be gradually reduced, trying to make the slide evenly flat until the very end.

How to build a slide?

It is convenient to build a slide using large balls of snow prepared in advance. The latter must be laid tightly together, and all gaps must be filled with a shovel. The resulting mass of snow must be compacted thoroughly. The result will be a base on which it will be convenient to create a descent, railings, and other elements.

steps

To make the slide convenient for both children and adults, you should take care of creating steps. They need to be placed on the highest side of the structure. The optimal width for steps will be from 40 to 50 cm. This will allow people with the most advanced skills to climb the hill comfortably. different sizes legs. On the sides of the steps you can make low sides, which will be easy to grab while climbing.

How to properly fill a slide with water?

Now let's move directly to the issue of filling. Before starting the procedure, you need to let the slide stand for several days alone. This will allow the frame to compress and become as strong as possible. Thus, the snow structure will not fall apart after the first ride.

How to fill a slide correctly? It is necessary to carry out such work when there is severe frost outside - from -20 ° C. Otherwise, the shape of the structure may “float”. The optimal time for filling the slide with water is considered to be in the evening, when the sun has already managed to hide behind the horizon.

People who are well versed in how to properly fill a slide with water recommend first walking along its surface, spraying small drops with a spray bottle. After a few hours, the structure will be covered with a thin ice crust, which will allow the main pouring to begin.

It is convenient to water the slide with water from a watering can. This should be done slowly. Indeed, with a large flow, there is a risk of large gaps forming in the thickness of the snow. Oddly enough, the water should not be the coldest. Using barely warm water, you can get a perfectly smooth surface much faster. If, with this solution, voids form on the surface of the snow, they should be immediately filled with slurry from snow, leveling with a piece of cloth. If you leave such shortcomings unattended, you can get scratched or tear your clothes when riding on the jagged edges.

How to properly fill a slide at the descent point? To do this, you need to mix snow into a container of water. The resulting slurry must be laid out on the slope, leveling with a construction spatula. For safety, it is worth building curbs along the entire length of the slope and treating their internal surfaces in the same way. Then you can leave the slide alone until the ice layer completely hardens.

After complete freezing, the structure can be doused with water again. Then you should walk along the descent with a polished board. As a result, the slide will become even more slippery and smooth.

Finally

Using the above recommendations, an adult will not be a lot of work build a slide and fill it with water. The main thing is to show imagination and do the work carefully. Naturally, it may take a whole day or even more to implement your plans.

However, the effort spent will pay off in spades, because with the help of an ice slide, children will be able to have fun from the beginning of the first frost until spring, without leaving their own yard. By the way, it will be possible to descend from such a home-made structure not only in warm clothes, but also on rubber mats, cardboard and even a sled.

Winter is just around the corner, and for kids it's school holidays. Any parent wants their child to have fun and useful time during this period. Of course, walks are also important for children and adults. fresh air and family leisure. To prevent them from turning into a boring pastime, you can entertain yourself. For example, build a snow slide together with your children, and then have fun sliding down it. We will tell you how to do this in this article.

snow Hill

Since ancient times in Rus' it was customary to ride down the hills on a sleigh. This was a favorite pastime for both old and young. Those who live in hilly or mountainous areas are lucky, just wait for snowy weather and the slide is ready. And most importantly, you don’t need to make any effort. Well, if there is no hillock near your house, or you live in apartment building You can build a slide yourself. We'll tell you how to do this later.

DIY snow slide

Making a slide with your own hands is not that difficult. For this you will need:

• prepared site;
• snow;
• several shovels;
• water.

First, you need to choose a place for the future slide. It is best to place it in an open area further from roads. This is primarily a matter of the safety of the children themselves. If necessary, clear the area of ​​debris. The size of the slide is also important; a small slide will be uncomfortable for children to ride, while a very large one may not be safe for children. The height should be comfortable and preferably below the height of an adult. This will make it more comfortable for you to monitor and help your child. It is best to make the length 5 m, this is the most optimal length. The shape of the slide is also important.

Show your imagination and make it with a twist, or decorate it with an arch at the top. Children will have a lot of fun riding on a custom slide. The place has been marked, now you need to throw the snow in the shape of the slide and compact it. Everything must be done evenly and in several stages. The angle of the slide should be from 30 to 50 degrees. The slope angle can be adjusted by adding material. If the slide is intended for small children, then it must be made flat from the very beginning of work. For convenience, it is necessary to provide steps along which children will climb the slide. To prevent them from slipping, you can lay them out with planks. Along the length of the slope itself, you can make a small side of snow to prevent children skating from falling. After completing the main work, it is recommended to fill the slide with water. To do this, you can take a bucket of water and gradually water it starting from the steps. Then let the water freeze and repeat the procedure several more times until the surface becomes smooth. If cracks and holes appear on the slope during the pouring process, they must be filled with snow and watered. After this, it is recommended to leave the slide overnight, during which time the water will freeze and in the morning the children will be able to slide down it.

How to make a snow slide

Making a snow slide is quite simple. This will require a minimum of equipment, just a couple of shovels, pieces of plywood and snow. The snow slide has a number of positive aspects:

1. Children can be involved in the work, regardless of age;
2. no material costs;
3. pliable material gives great scope for imagination;
4. the ability to add new elements at any time.

There is only one drawback - it's seasonality. The slide will delight everyone only throughout the winter. The main thing is that adults and children can show their imagination and create something original. To simplify the work, you can build a frame from pieces of plywood. Secure them firmly and cover them with snow. Having made the descent and steps, you should take care of safety. Make sides along the edges of the slope and provide small handrails for ease of climbing the slide. After which the entire slide must be covered with water to form an ice glaze. It will give strength to the entire structure. For convenience and safety, the topmost platform of the structure can be covered with plywood. After which you need to wait until the next day and you can safely start testing.

How to fill a snow slide

It would seem that it could be simpler to fill a snow slide with water. But, even here there are some nuances, the implementation of which will significantly simplify the work. For proper filling, the following rules must be observed:

• you need to protect your hands from cold and moisture, for this we wear warm gloves and rubber gloves on top;
• It is best to fill the surface in frosty weather;
• best to fill warm water, it will harden faster.

It's not all that difficult. For filling it is best to use regular garden watering can. With its help, the water will be more evenly distributed over the slide and the surface will be smoother. This process is quite labor-intensive. But a few hours of work are worth the happy children's eyes and ringing laughter. This will be the best reward for your efforts.

Snow slide

The snow slide can be made in different shapes and size. For example, you can build wooden frame with two descents. One steeper and longer for adults and older children, and the other with a lower angle and length of descent for children. After which the frame is filled with snow and the slide is ready. This structure will be strong and safe. And most importantly, it can be used in the warm season. Place sheets of tin or other sliding material on the slopes for the amusement of the children.

If you have imagination and free time, you can build a slide for children with arches in the form of a log hut. This slide has several descents. Children will have a lot of fun riding this slide. The main thing is that they will have a fun and active time.

If desired, you can beautifully decorate even the most ordinary mountain. For this you will need paints and brushes. On the side surfaces of the slide you can draw Christmas trees, snowflakes and winter birds (for example, a bullfinch). Such simple patterns will appeal not only to children, but also to adults. Kids will enjoy sliding down the slide and admiring the drawings on the way up. As you can see, making a slide is quite simple, and with a little imagination you can make even the simplest model beautiful.

This article talks about snow slides and how you can build them yourself. Advice is given on filling the resulting structure with water. Describes how you can arrange appearance structures. Using the advice in the article, you can quickly build a safe slide for children using available materials. Fill it with water correctly and, if desired, decorate it in an original way. Good luck with your work.