Winter fun: How to properly fill a slide. How to make a snow slide for children

Find out how you can make a snow slide yourself in winter, how to properly fill it with water so that it freezes.

Agree that in new year holidays One of the best, most memorable childhood memories is winter festivities. Making a snowman, sledding, skiing, and, of course, on the slides is a wonderful activity. The latter will be discussed in this article.

You will learn how to build a slide without difficulties at home, without any outside help. This slide will bring great joy to your children and even adults, and to make the work less boring, you can involve the whole family in it.

How to make a snow slide for children with your own hands?

It often happens that some problems occur during the construction of a slide. It collapses, falls apart, and pits and irregularities appear in the most inappropriate places. Next, you will learn how to make a slide correctly. So that it is durable, reliable, and most importantly, comfortable.

Materials for building a slide

To build successfully you will need the following:

1. Frost outside the window
2. A large amount of pure snow
3. Shovel
4. Broom
5. Quite a decent amount of water
6. Watering can, ladle
7. Positive attitude
8. Scraper or spatula

To build a slide, you need to follow a few simple rules:

Safety. Choose a safe location for the future structure. This is necessary so that your child does not get hurt during the descent, so that there is no tree, fence, road, bushes or other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which an icicle, slate, brick, etc. may fall.

Slide height, tilt angle. Determine the height of the future slide based on the age of the children. For very young children, up to about three years old, a slide one meter high is enough. For older children, the most optimal, safe height is two to four meters. You should also adhere to correct angle tilt, such that it is no more than forty degrees.

Pure snow. When constructing a slide, you must use clean material. Because your child may smear things. Try to prevent children from getting hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.

Creation order ice slide:

• Once the location and size are determined, we begin work. Using shovels, you need to throw the required amount of snow. For example, a meter-long slide can be built in about thirty minutes. It is advisable to make the foundation of your snow slide using rolled large balls of snow. This way you will already have the base of the slide created.
• Next, we proceed to the formation of our slide. Using a spatula or broom, give it the required form. We make the optimal angle of inclination of the slide, straighten the area of ​​descent of the snow slide.

• If the slide is high, make steps using a spatula (scraper) or shovel. To make the steps stronger, strengthen them with your feet so that the snow settles, and only then shape them with an auxiliary tool. They should be comfortable and small so that children can easily climb up.

IMPORTANT: The acceptable width of the step is at least twenty-nine centimeters.

Don't forget about the sides. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The sides can be made using a shovel. Also, in order to give them shape it is necessary to use handmade. During it, do not forget to wear gloves as protection from the cold.

If you have the desire and time, then add decor. Decorate the slide with snowmen, various figures, and paint it with patterns. Or do everything to your liking, a lot depends on your imagination.

How to properly fill a snow slide with water?

We have come to the most difficult final stage - filling the ice slide with water. The slide must be filled in several stages - at least three times. Use cool water using a spray bottle, watering can, or ladle.

You will need a broom; with it you spray an even layer of water over the entire surface of the structure. Make sure there are no irregularities, holes, or bumps. To do this, during pouring, you need to smack the set thin, fragile layer of ice with a broom. After the second stage, you have a rough crust of ice. For a more reliable result, fill the slide a third time, after which you will get a strong, smooth, and most importantly, reliable structure.

IMPORTANT: Fill finished design stands at a low temperature, from 10 degrees below zero. Otherwise, your efforts will be completely useless.

If you follow the entire sequence of work, you will get an excellent snow slide, which your children will be very happy with. If the winter turns out to be frosty, then the item of entertainment will last until the spring thaw.

Video: DIY snow slide

Skiing down the mountain is a favorite pastime for children of all ages, and only adults can provide them with convenience and comfort in this activity, and they will have more than enough fun and enthusiasm. A slide can be built from a variety of available materials, and which ones will be discussed in this article.

What do you need for a slide?

In order to make a slide with your own hands, you can use metal, plastic, wood, as well as scrap materials left over from an old cabinet and desk. With even a little imagination, you can build a real miracle from them and place them in the corner of the children's room to the delight of your baby.

You can make a slide for your child from an old desk.

For this you will need:

• varnished cabinet door;
• plywood sheet;
• small boards, which can be pieces of a shovel handle, legs from a table or chair.

Manufacturing stages:

Making a snow slide

Making a mountain out of snow with your own hands is very simple. The main thing is to wait until the temperature outside approaches about 0 ᵒC. And, of course, it is important to have enough snow.

You will also need:

• shovel made of metal or plastic;
• construction spatula, scraper;
• bucket or watering can;
• warm mittens.

Manufacturing stages:

1. The primary task is to determine the location of such a homemade attraction. To minimize injuries, it is imperative to ensure that you roll out onto a level area so that
   the child could roll evenly until it came to a complete stop.
2. The height of the slide is determined based on the age of the skaters. For children under 3 years old, a rise of 1 meter in height will be enough, and for older children you can build a higher slope, the main thing is that the slope does not exceed 40 degrees.
3. Roll several large balls and form them into the foundation of a future building. If you plan to make a fairly high slide, then you should think about how the children will climb it. The problem can be solved by making the same snowballs that can be laid at the foot in the form of steps.
4. Use a spatula and scrapers to level the surface of the steps and leave the structure until cold weather sets in.
5. The slide should be filled in cold weather. It is not recommended to use buckets or a hose for this, as there is a high risk of large holes forming. It is better to use a regular garden watering can or the one that housewives use to water indoor plants.
6. Using a piece of plywood or a shovel with a wide working part, slowly pour water onto the structure. Or you can cover the raised area with a large piece of fabric and pour through it - this will help the liquid to be distributed more evenly over the snow.
7. If you don’t have anything at hand except a bucket, then you need to mix the water in it with snow and cover the surface with this very slurry, leave it to freeze overnight, and repeat the procedure in the morning.
8. That's it, the slide is ready. If necessary, potholes can be smoothed out with a spatula.

In our online store you can purchase winter wooden slides - they are stronger, safer and more durable than snow slides. The slides we offer have GOST certificates, a durable prefabricated design and good protection from rotting and dampness. And, unlike handicraft products, every detail wooden slide processed on all sides, the edges and edges have a rounded shape, which eliminates the possibility of getting a splinter or injury.

So, after purchasing and assembling a winter slide, you need to turn it into an ice slide, how to do this?

We place the slide so that later we can extend the rollout of the slide to the desired length. Cover the slope and sides of the slide with wet snow and connect bottom part slide slope with soil, compact it and leave to harden. At this time, we extend the rollout - we compact the snow along the trajectory of movement and sculpt sides from the snow. When everything freezes, we begin to fill the slide with water.

We wait until the temperature is significantly below freezing, pour water into a water line with a sprayer and water the slope, sides of the slide and roll-out with water. The main thing here is not to keep the watering can in one place for a long time, so as not to wash away the snow and the previous layer of ice. When one layer hardens, pour the next one, and so on until the required density and thickness of the ice is achieved. And leave the ice to harden overnight.

Please note that the steps cannot be filled with water - to ensure safety they must be clean and free of snow.

In the morning we polish the ice. To do this, pour half a bucket hot water, pour snow into it and stir until it becomes a homogeneous paste. Then we take a plastic spatula and cover all the holes in the ice; We also take care of the ice during further use. We make the finishing fill from a watering can and after the ice has hardened, that’s it, you can skate. After children slide down the ice slide 10-15 times, the ice will polish and become slippery. Have a happy winter!

If you have a ready-made wooden slide, then this is an ideal basis for creating an ice slide. The quantity depends on its size required water, sometimes more than eight hundred liters of water were required to create a high-quality ice slide. So, find a water source next to the finished wooden slide and connect a hose to it.

If there is no such source nearby, you will have to carry water in buckets by hand and water the hill from garden watering can. It will be inconvenient to water the hill from a bucket, since its flow will be too strong and will wash away the snow. In this case, a sheet of thick fabric is placed on top of the slope, and then watered with water.

It is recommended to fill the slide in the evening, with significant sub-zero temperature, so that in the morning you can apply a final layer of water and start riding. Before you fill the wooden slide with water, you need to cover it with snow. To do this, we bring snow on a shovel or use a stretcher and compact the snow along the slope of the slide and its handrails.

You can cut out large bricks from the snow and carry them to the hill, place them on it and spread the snow with a shovel in an even layer. The rollout of the finished slide can be continued far forward so that its length increases significantly. After the handrails, ramp and rollout are carefully and neatly covered with snow, we proceed to the process of pouring water.

If you have a hose, put a spray nozzle on it and carefully start spraying water from above onto the surface of the ramp and handrails, and then onto the rollout of the wooden slide. It is better to leave the stairs without snow; if snow gets on it, remove it with a shovel, this will make it safer for children to climb the hill.

After the snow is well saturated with water, leave the slide for a while to form an ice crust. Next, dissolve a small amount of snow in water so that you get a snow slurry. Wearing warm mittens and, on top of them, rubberized gloves, treat uneven places and depressions on the slide so that its surface becomes perfectly smooth and even.

Now - the second layer of water: again take the hose and slowly water the hill from top to bottom. After making sure that the slide is level everywhere, you can leave it overnight. In the morning, you need to go through all the defects again with ice slurry and pour the slide one last time, and then let it freeze completely. Now you know everything about how to fill the slide correctly so that riding on it becomes a real pleasure for children and adults.

During active use, make sure that the wooden base of the slide is not visible. If this does happen, you can fill the slide again with one layer, after filling the depressions with snow. To ensure that the layers are perfectly aligned, rub the joints with a wet sponge.

Do not allow several children to slide down the slide at once, as they may hit each other hard and get hurt. It is not recommended to take children under three years old on very high and steep slides; this can be dangerous for them; in addition, the speed of the slide can greatly frighten the child. Be careful during winter games and traditional entertainment.

A DIY snow slide is an ideal activity for adults and children. After all, you only have to spend a few hours building the structure.

But your kids will have a wonderful ice attraction for the whole winter.

Let's start together

How to fill a snow slide? For this you need very little - snow, desire and enthusiasm. Well, also a few working hands. It’s good to involve the kids in this matter. After all, a snow slide made with your own hands will be especially loved if a piece of your labor is invested in it. Younger children can be entrusted with the simplest and most basic work, for example, bringing snow in children's buckets or rolling snowballs. Older children can be challenged by building steps. Well, you can even trust more experienced people to fill the descent with water. Believe me, the kids will remember the process of building a slide from ice and snow for the rest of their lives. It's so exciting!

Necessary equipment

Before building a snow slide, let's prepare the tools and equipment that will be needed for the job. There must be a lot of snow so that it can be used to build a frame and steps, and also add slides during operation. You also need to prepare:

It is advisable to equip the kids well who will help you during construction. After all, the main thing in this matter is not to get sick, and not just to solve the question: “How to fill a slide with snow?” Therefore, it is better for children to wear waterproof overalls and also stock up on several pairs of mittens. Make sure that the little ones don’t sweat or loosen their clothes, otherwise it’s very easy to catch a cold.

Specifications

Any construction project must have its own parameters. They depend on the age of those who will ride on the homemade slide. If these are teenagers and adults, you can safely build a slide one and a half to two meters high. If kids will ride on this snow attraction, then the height of the slide should be no more than one meter.

The length of the descent, to make it easy and safe to ride, should be about 5 meters. It is very important to calculate the angle of descent. The slide should not be made too steep; the slope should be about 40 degrees. If you make it bigger, then the pleasure from

there will be less descent, and at the end of the descent on a steep hill the child may receive a noticeable blow. But a slide that is too flat will be uninteresting, because then the speed of the slider will significantly decrease.

The width of the slide should be sufficient so that you can slide down it on a sled. This is about half a meter, no more. Having thought about how to fill a snow slide, do not forget about the sides on the descent to ensure safety. Otherwise, kids risk falling before reaching the end.

Don't forget about reliable steps - they will make it easy to climb the hill, and if you sprinkle them with sand, they will no longer be slippery.

Benefits of a snow slide

If you make a slide at the beginning of winter, then throughout the snowy season it can be improved and modernized by adding arches, turns, making branches, adding snow sculptures and decorating it. The advantages of this design are obvious:

• construction can be carried out with children of all ages;
• no special costs no need for expensive materials or specific tools;
• You can experiment and apply your own design.

Before you fill the snow slide, you need to choose a convenient place. It is very important to place it away from the roadway and away from paths. See how well it will be lit in the evening, because it gets dark early in winter. Choose its location so that there are no bushes or trees nearby, no fences, hatches, poles, or anything that could pose a danger to those riding.

Shovels in hand - and forward

It’s better, of course, to guess when a relatively warm day will arrive. Then the snow will be sticky and the construction process will be much easier. How to make a snow slide? First, let's roll up a few snow globes different sizes. We place the largest one at the base, then we install a smaller ball and so on until the descent. We fill the empty space between them with snow and compact it tightly.

Then we form the steps. They should be wide enough and not too high. It is recommended to lay sheets of plywood on the descent line - then the surface will be even and smooth. The plywood should be covered with snow and the surface should be compacted tightly to a thickness of approximately 10-15 centimeters. Then, after filling with water, the slope will not sag and no holes or bumps will appear on it.

Fill several times

When the frame of the slide is ready, all that remains is to fill the slide with water. It is best to repeat this several times over several days so that the ice layer is strong.

Otherwise, the sled will quickly break the ice. Do not pour water in a strong stream so as not to wash away the snow; do it carefully and slowly.

If it’s already frosty outside and it’s impossible to choose a warm day to build a slide due to meteorological conditions, then plywood and wooden shields You can install formwork and pour snow into it.

It will also be convenient to cut snow bricks from snowdrifts that have been well compacted. They are placed, for example, at the base of steps.

Initially, the steps should also be filled with water - then they will gain strength and will not crumble underfoot. As soon as they are well frozen, they must be sprinkled with sand so that the children can climb them without fear.

Think about the top platform of a snow slide. It should be level, safe and relatively large so that the child does not fall off it. You can also lay boards or plywood on top of it. But be sure to ensure that the platform is not slippery.

You can make two descents from one site: one steeper, the other gentler. Don't forget to decorate your slide with an arch or a funny snowman - your attraction should be not only functional, but also aesthetically attractive.