Do-it-yourself home fountain. DIY decorative fountain at home How to make a beautiful fountain

By making an indoor fountain with your own hands at home, you can not only save a lot a large sum money, but also to buy useful decoration interior According to the Chinese teachings of Feng Shui, the symbol of Water, placed in the northwestern part of the home, ensures prosperity in the family. An excellent embodiment of the moving element in the house can be a babbling brook, a cascade of waterfalls or another form of fountain.

Small decorative cascades for interior decoration should be made taking into account the fact that there is nowhere to drain the constantly rising water at home. This means that the amount of liquid in the system must be constant. To comply with this requirement, the fountain installed in the room must be made to operate in a closed cycle. In this case, water will be collected in a storage tank. The pump installed in the system must lift it to the top point of the structure, from where the liquid will flow out, again falling into the tank.

In order for a thin stream to beautifully flow, drip or shoot up, decorative obstacles should be made of shells, stones, shards or other objects in its path. IN Ancient China and Japan, specially trained craftsmen built a channel for a stream so that it would babble beautifully. Tuners of the “music of water” created real masterpieces from ordinary pebbles, laying them so as to form cascades with depressions into which drops and streams fell, producing the noise characteristic of a stream or waterfall.

What to prepare for work?

To create a mini fountain, you need to choose a suitable pump. Its power depends on the height to which the liquid needs to be raised. This value is dictated by the dimensions of the structure and is determined individually. If you want to make a fountain with your own hands so that the stream of water shoots upward, it is better to buy a pump with more power and a regulator. To assemble a small tabletop cascade, an aquarium pump for filtering water is sufficient.

Before you make a fountain with your own hands, you need to prepare:

• a reservoir into which water will flow;
• silicone tubes;
• waterproof glue;
• materials for decorating the product.

The reservoir bowl should be spacious. In addition to its direct function - collecting liquid circulating in the system - it will also serve as the basis for a composition made of stone or other materials. Some of them can be placed directly in the container.

What to do if there is no pump?

A low-power pump that can raise water to a height of about 20 cm can be made independently. For this you need:

• a motor from a children's toy, camera or other, protected from water;
• batteries (phone or finger batteries);
• charging connector if using a mobile phone battery;
• LEDs - optional;
• switch of any type;
• electrical wires;
• plastic gear;
• a small round container (aerosol cap, plastic bottle);
• waterproof glue.

Make an impeller for supplying water from a gear from an unnecessary mechanism: adjust the wheel to the diameter of a round container, glue 4 pieces of plastic crosswise onto the shaft: fig. eleven). Drill a hole in the bottom of the container for the motor shaft, and in the side for water. Place the motor shaft inside the container, glue the motor housing to the bottom of the pump reservoir from the outside, and secure the impeller to the shaft inside (2). Cut a piece of plastic, make a small hole in it, and seal the open part of the pump body. Attach a tube to the hole in the side and seal the connection (3). Connect the wires to the motor and carefully insulate the connection, protecting it from water. Any sealant will do for this.

To connect the motor to the power source, use diagram (4). It is important to remember that batteries should not be exposed to moisture. You can attach them to outside pool, glue the switch here too.

You can include a resistor in the circuit to adjust the speed of rotation of the motor or LEDs for decorative lighting.

Assembly method

A homemade or purchased pump must be attached to the bottom of the tank (storage container). Its depth should be such that the pump is completely immersed in water. You can hide the pump in different ways: place a mesh cover on top of it, on which pebbles or shells will be laid, representing the bottom of a reservoir, or hide it inside large element decor. One of the design options - a dry fountain - provides for a completely hidden water surface in the storage tank. To do this, you need to lay a grate on top of it and secure the stones. The water will pass through the stones into the container without forming a visible pool. Rice. 2.

A short master class will tell you how to make a mini fountain in an apartment with your own hands from ceramic pots (Fig. 3):

1. 1 Prepare 2 ceramic pots and 5 trays (2 large and 3 small). Cover them with waterproof varnish, drill a hole for the tube in the center of 1 larger and 1 smaller tray. Make cuts on the edges of the pallets to drain water.
2. 2 Install the pump at the bottom of the tank, following the diagram in the figure. Cover it with a large pot, and lead the tube through its drainage hole and drilled holes in the trays to the very top of the structure.
3. 3 Place a smaller pot next to it and secure the tray to it. The next tier consists of 2 small pallets (one is upside down and serves as a base for the bowl from the other). The pallets must be placed so that the holes cut into their sides allow water to flow from one to another, forming a cascade.
4. 4 Decorate a fountain, assembled with your own hands from the most simple materials, beautiful stones, plants and shells, figures of aquatic animals or birds.

Such a miniature pond can be placed on the table or given a special corner among indoor plants. Iridescent water will not only enliven and decorate the composition, but will also slightly humidify the air.

Waterfalls in the room

Stylish and fashion decoration interior - vertical waterfall (Fig. 4). This variety indoor fountain It’s not much more difficult to make with your own hands than a mini tabletop fountain. The only difference is the pump power for such a large structure. When looking for a pump, you need to pay attention to the fact that the height of the water column is at least 1.8-2 m. This will make it possible to build a water wall or stream originating from the ceiling of the room.

Before making a home waterfall, you need to waterproof the floor in case the tank leaks. For this, polyethylene film can be used. It is advisable to cover with it a section of the floor 15-20 cm larger than the perimeter of the future structure.

For the panel on which water will flow, you will need:

• thick glass or mirror;
• 5x5 cm bars for support posts;
• boards for the base of the top cover;
• pipe plastic diameter 2 cm to distribute water over the glass;
• a block or thick board for the clamp step.

The structure of the fountain supply system is the same as discussed above.

On top of the fountain tray, you need to install and secure a board with a stop to fix the glass in a vertical position. Knock down the frame from the support bars and crossbars on top. The role of the crossbar can be played by the horizontal bar of the top cover.

Drill a piece of plastic water pipe, the length of which is equal to the width of the glass panel, in one line along the axis. The holes should not be located too far from each other so as to avoid the impression of separate streams. Plug one end of the sprinkler tube and secure it to the top cover strip. Install backlighting if necessary.

Place the glass panel vertically, resting the lower edge against the step of the latch. Attach the side parts to the support bars using liquid nails. To prevent water from spreading beyond the panel, sides made of strips of glass, wood, and plastic must be glued to its edges.

Install the pump into the pan and run the water supply tube up to the open end of the distribution pipe. Connect and seal the connection. Hang the front part of the top cover. Decorate your home fountain with your own hands according to your own taste. Through many holes in the sprinkler pipe, streams of water will fall onto the glass and flow down it into the pan, creating the illusion of a falling stream.

Materials for decorative finishing indoor fountains, made with your own hands in tabletop or floor-standing options, can be found in pet stores (colored soil, castles, shells, ships in the aquarium department). Flower shops sell bamboo plant supports and beautiful containers. In the souvenir departments you can find artificial bonsai, figurines of birds and animals.

There is nothing more pleasant than to relax after working day under the quiet splash of water in a man-made stream. Decorative functions fountains are perfectly combined with its main purpose - to humidify the air in the room. You can add live indoor plants to the streams of flowing water.

In specialized stores today you can buy very original ones. The range of such goods is quite large, as they say, for every taste and color. Many people like it when they can hear the sound of a small trickle of water in their home. These sounds allow you to relax and calm down after a hard day at work. However, most consumers have no idea what can be done. special costs It does not require, nor does it require knowledge.

Material for construction

So, below we will describe how to make a fountain at home. For creating original design you will need:

1. Glue.
2. A container that will serve as the base for the fountain.
3. Approximate diagram of the fountain
4. Large sink.
5. A small piece of hose commonly used for cleaning aquariums.
6. Polyethylene film.
7. Expanded clay, decorative multi-colored soil and shells various forms and sizes.

A large sink will serve as the central detail of the entire composition. A pump and hose are needed to pump water, and multi-colored soil, shells and expanded clay are needed for decoration. In addition, you need a small piece polyethylene film. So, expanded clay can be purchased at any flower shop. As for black, red soil, it is better to use a special mixture for aquariums.

Selecting a container

A home fountain should be durable enough and at the same time beautiful. Therefore, the container for its base should be selected more carefully. The first step in making a structure is selecting a vessel. For the fountain in in this case you can take flower pots. If there is no such container, then you can use a flower pot, a beautiful basin, a clay vase, etc.

The most important thing is that the vessel does not leak. If, for example, in flower pot If there are holes, they should be sealed with epoxy glue.

Choosing a pump

Since anyone can make a fountain at home, it’s worth paying special attention to the pump. After all, not everyone understands them. There are several with a sprinkler on the tip and a regular one. In this case, the first option is not suitable. First of all, splashes can get outside the main container. And one more thing - we have a completely different idea.

Therefore, to make a mini fountain with your own hands, a regular pump will be enough. You can make the tip yourself. In this case, the pump should simply raise the stream upward.

First stage

So, how to make a fountain at home without much expense? First, you should cut off a small piece of hose, about 10 centimeters long. After this, you need to put it on the tip of the pump and see if the hole in it is completely open. The power of the jet that will be supplied to the fountain depends on this. Ready design should be installed at the bottom of a previously prepared container.

The home fountain in this case will have a large sink in the center. It is from this that the water will flow. Therefore, it is necessary to make a hole in the sink that will be sized to fit the hose. This can be done using conventional drill. Of course, you should drill the sink carefully so that its walls do not crack.

Stage two

The fountain layout is quite simple. With its help, everyone can assemble a similar decoration for their interior. When the pump is installed in the container, you can fill in expanded clay, which must be covered with polyethylene on top. A hole for the hose should be made in advance in the film.

Polyethylene is necessary so that expanded clay does not float when wet. After all, water will be poured into the container. After this, multi-colored aquarium soil should be poured onto the film.

Sink stand

The composition will not look good if the main element is simply installed on pebbles. Therefore, you should make a neat stand. So, how to make a fountain at home that will not only soothe with the pleasant sounds of flowing water, but also be a wonderful addition and highlight of the interior? A beautiful stand can be created from pebbles. They can be attached using epoxy glue. When making a stand, do not forget about the hole for the hose.

Assembling the structure

When the stand is ready, a hose should be passed through it. If it is too long, then it needs to be shortened. Otherwise, it will be visible where the water is coming from. Now you can install the main element - a large sink. The hose should be pulled only one centimeter into the pre-made hole.

That's all, all that remains is to decorate the fountain. To do this, you should sprinkle some shells around the sink and put the most beautiful pebbles. All this can be purchased in the store - for lovers of aquarium fish or as a gift.

If there is no large sink, then it can also be replaced with any suitable item. The main thing is that you can make a hole in it for the hose. The design of a decorative fountain for a room depends entirely on the imagination of its creator.

The final stage

After the composition is completely folded and all its elements are secured, water must be poured into the container. There is no point in completely submerging the soil. So the fountain will lose main idea and your charm. The most important thing is that the pump is completely hidden under water.

Now you can turn on the fountain. To do this, you need to plug the cable from the pump into the outlet.

That's all, homemade fountain ready for the room. However, it is worth remembering that the water from it will gradually evaporate, especially in the hot season. Therefore, it will be necessary to add liquid to the decorative fountain at least once a week. If necessary, it can be done more often.

You can disguise the cable from the pump going to the outlet. In addition, the indoor fountain can be decorated with artificial flowers. This will give the composition a more impressive look.

Finally

Now you know how to do home fountain. To create it you do not need large expenses and special talents. It is enough to turn on your imagination. It doesn’t take much time to make such compositions, but they will delight you for many years.

An indoor fountain will decorate the house, humidify the air in the room, and give a little coolness on a hot day. There is no need to buy expensive installations. If you consider yourself creative person, then be patient, give free rein to your imagination and start creating a fountain with my own hands.

The design of an indoor mini fountain is quite simple. It is based on the principle of a closed cycle: water is poured into a system connected to a power source, while submersible electric pump lifts water up, and then, depending on the type of structure, it flows into a storage tank.

An indoor fountain can be of three types depending on the method of water discharge:

• gushing: the stream shoots up and falls into the mini-pool;
• cascading: water falls from a small height, flowing over decorative ledges;
• closed: water circulates in flasks or flat wall-mounted containers in the form of pictures.

Photo source: http://svoimirykami.ucoz.ru

Indoor fountain location

Before starting work, decide on the size and location of the future fountain. A bulky, large fountain will look out of place in a small apartment.

An indoor fountain can be floor, wall or tabletop. The choice depends on the size of the room and the functions assigned to the fountain. For small room A small tabletop fountain would be optimal.

Functionally, the fountain serves not only as a decorative item, it humidifies the air well. Therefore, fountains should not be installed near wooden furniture: It can deteriorate from constant moisture. When choosing the location of the fountain, also take into account the presence of small children or pets in the house: install the structure where it will not disturb anyone.

Photo source: http://www.coonplace.ru/

Materials for creating a fountain

Most often, indoor fountains are made of glass and stone. The glass part is a kind of foundation for the fountain, its basis. Stones are used to stabilize the structure. For fountain parts that do not come into contact with water, you can use wood, ceramics, and synthetic materials.

Photo source: http://www.zoloto72.ru

An indoor fountain can be supplemented with lighting. At night, such a fountain will serve as a kind of night light. A sound background and an additional built-in clock or barometer will make the fountain functional.

The main element for creating an indoor fountain is a pump (water pump) for circulating water. An indoor fountain is a small installation, so don't go overboard. Choose low-power ones silent pumps for aquariums or especially for small fountains with a power of approximately 6 W and 240 l per hour. The higher the power, the noisier the pump. You should hear the murmur of water, not the operation of an electric motor.

Photo source: http://svet-lanka.blogspot.ru

Indoor fountain decor

The beauty of creating a fountain with your own hands lies not only in saving money, but also in the opportunity to decorate it to your own taste. If you have difficulties with inspiration, you can always take advice from people who know: look through magazines about interior design.

What might be suitable as decor? Before you run to the store, think about how many cute little things you have lying around your house, unused. A pot, ceramic pot or vase, shells and pebbles brought from the sea - the most popular “filling” for fountains – can be used as a base. Even souvenir figurines can find a second life. Artificial trees and flowers, gravel, living plants - all this can become decor for a fountain.

To create flowing water, you can use different containers: bowls, sea shells, lakes, etc.

Photo source: http://domgvozdem.ru/

Indoor fountain step by step

Making a fountain with your own hands is very simple. The main things you will need:

• sealed container for a fountain: flower pot, vase, pot, bucket;
• water pump (pump for moving water). The pump can be purchased at a hardware store or pet store; a low-power water pump for aquariums is suitable;
• a piece of hose (for example, for cleaning aquariums);
• decorative elements.

Photo source: http://www.trozo.ru

We install the pump at the bottom of the selected vessel (the pump has suction cups) and attach a hose to it. We cover the pump with stones, and the water supply tube is brought up between them. Cover the space around the pump with large decorative elements(expanded clay, stone), then smaller ones (pebbles, shells, glass). We leave only the outlet of the filter, and fill the rest with water. The tube, like the pump itself, should be completely masked so as not to disturb the harmony of the composition. And then the decor and design at your discretion.

Photo source: http://home-sweet.ru

A good solution is to “seat” a figurine (frogs are often used) on a tube supplying water. To do this, you need to drill a hole in the figurine and thread a tube into it, water will flow from the frog’s mouth.

Reliable fixation and sealing of the entire structure is achieved through the use of waterproof adhesives.

The power of water emission is controlled by a wheel located on the pump body. This power also depends on the diameter of the tube: the smaller it is, the higher the jet, accordingly. If you want water to flow out in several streams, install a divider on the tube.

Operating an indoor fountain does not cause special effort and consists only of maintaining a sufficient water level for circulation. There should be enough water so that the pump is constantly in the water. The water will evaporate, so it will have to be added to the fountain every week.

Photo source: http://tvoidizain.ru/

Funny video

2 summer baby likes to throw. Look what happened when his parents bought him a basketball hoop!

We all rejoice at the arrival of summer, but when the sun begins to get very hot, we want coolness. Therefore, many people strive to spend more time near fountains, which will not only freshen the air, but also lift their spirits with the sound of falling water. But you don’t have to go to the square to admire this action. Every person, regardless of whether he lives in an ordinary city apartment or in a private house, can make his own decorative fountain.

Pros and cons of creating

Decorative fountain is primarily an element designed to decorate the surrounding space. It has several key advantages:

But artificial fountains also have certain disadvantages:

• Need for special care and periodic monitoring. This structure must be cleaned regularly to prevent debris from clogging the pump. It is also necessary to monitor the serviceability of the equipment and promptly resolve any problems that arise.
• Given that the pump requires electrical power to operate, the fountain will incur certain costs to operate, which can be particularly high if the installation will be in operation for a long time.

Types of structures

Decorative fountains may differ from each other in various parameters. For example, according to the type of placement, they are usually classified into indoor and outdoor. The former are intended for decorating rooms, and the latter are used in open spaces, where they act as component element landscape design.

Based on the type of design, fountains can be divided into several types:

Depending on the nature of the movement of water flow, fountains can be divided into the following types:

It is also customary to additionally highlight annular a fountain in which a ring-shaped pipe is provided, and holes are located in it at the same distance from each other. When water is supplied through them, a flow appears that resembles a ring.

An interesting variation is installation in the form of a hemisphere or hemisphere. It consists of several parallel disk attachments connected in a special way. When water is supplied under pressure, the stream takes on a spherical shape, which gives the entire structure a very unusual and impressive appearance.

Shapes and sizes

Although the fountain can have any size and shape, when choosing them it is recommended to use common sense and remember that it will be somewhat more difficult to care for an installation with a more intricate shape and large dimensions.

The bowl of the fountain can have a symmetrical or non-standard asymmetrical shape. For example, it can be made in the form of an oval, square, circle, triangle, as well as any other geometric shapes, including those that follow the contours of the silhouette of an animal or a person.

Also, fountains can be complex multi-level or made of several interconnected containers. In this case, each of these elements can be equipped with its own nozzle, being integral part more complex installation.

Stylistic design

Fountains used for decorative purposes can be made in a wide variety of styles. Whether a structure belongs to one direction or another depends on various factors - appearance, shape and size, material of manufacture.

There are several design options applicable to decorative fountains:

Installation location

In order for a decorative fountain to successfully cope with its role, it is necessary to correctly approach the location of its placement.

Prepare the area in advance so that you can approach the fountain or sit close to it. Make sure that the structure is not obscured by other landscaping elements.

DIY decorative fountain

It is not necessary to pay money to a craftsman to make an original decorative fountain. Any owner can handle this task independently.

Materials and tools

And first of all, you need to prepare the tools, materials and devices necessary for the work:

• container that you will use as a bowl. It could be old barrel or bath. The main thing is that the product is strong enough without damage to withstand the volume of water;
• a pipe or a sufficiently strong and dense hose for supplying water;
• pumping unit;
• materials for waterproofing;
• filter;
• nozzle;
• shovel.

Manufacturing process

Once you have prepared everything you need, you can proceed to making a decorative fountain:

The fountain you make will last longer if you regularly check the condition of the devices and promptly eliminate any malfunctions that arise, as well as clean the bowl of any debris that gets into it.

A decorative fountain can become one of the main elements of your site and better side change its design. You just need to approach its production correctly. With a little imagination and using unnecessary materials, you can certainly create a creation with your own hands that will look no worse than products made by professional craftsmen.

While landscaping their backyards, some owners at some point realize that there is not enough fountain on their property. You shouldn’t give up on this idea if you have everything planned out long ago and there is no extra space left. After all, it doesn’t have to be a large structure. Even on small areas you can find a place to arrange a compact decorative fountain, which will give you coolness and become a wonderful relaxation area.

If you decide to create it yourself, then you need to thoroughly prepare for this work. And first of all, you must understand what type of installation this installation should have, what material it should be made of, and how water should flow in it. These and many other factors will determine whether you will be satisfied with the end result.

If this is your first time making your own fountain at your dacha, then you should not build a complex configuration installation. This will not only require more time from you, Money and strength to create it, but it will also create certain difficulties for you in the future during care. It is best to build a small fountain standard form, which can be made from the most ordinary materials and it will be no more difficult to care for than any other object on your site.