Drainage pumps. Rating of drainage pumps for air conditioning Silent pumps for air conditioning

Drainage pump: advantages

More often, air conditioner drain pump must be included in its design. Some manufacturers of cassette and duct products equip their devices with this important spare part for condensate drainage. In addition, this part has the following advantages:

High performance;

Long service life along with reliability;

Tightness, protection against overheating;

Makes it possible different types installations, for example, hidden installation(behind suspended ceilings);

Installation of this element can be carried out even in a bedroom, nursery or library, because it is almost silent;

The presence of an alarm signal and level sensors is provided for even in the designs of the simplest models; they make it possible to turn off the device in time and prevent the breakdown of climate control equipment.

It is possible to connect the part to an existing system.

Drain pump for air conditioner : kinds

When it comes to purchasing drainage pump, price is not the only determining factor. These parts also differ in performance and installation methods. Their operating principle is similar to an electric drainage pump; they are divided into the following types:

Flow-through. Mounted in a drying bath, on a drain hose or outlet pipe. These devices are small enough to be part of a duct equipment and dehumidifier. Almost all models consist of a pump and a three-level sensor; they are often used on small split systems and are mounted in the internal niche of climate control equipment.

Liquid. They have an impressive tank for collecting condensate and are characterized by high productivity (80 - 1500 l/h).

Peristaltic. Capable of raising water using a special pump to a height of up to fifteen meters. They can be used in places where not only such a characteristic as lifting height is required, but also suction, which is impossible for other types and drainage elements.

The Cold24 online store offers a wide range of pumps. Aspen, for example, offers a self-filling storage element that can lift water twenty meters. It is inserted inside powerful units.

Drainage pumps: Sauermann , Aspen, Eckerle other manufacturers

Models are in demand among consumers Mini Aqua,Mini Orange. They are capable of lifting liquid to a height of up to ten meters. Even after the device has stopped working, condensation will be removed.

The smallest and quietest sump pump.

The Aspen Mini Aqua Silent drainage pump is designed for installation:
- under the drain pan;
- in a plastic box;

NOT intended for installation above a false ceiling

To drain condensate, simply place the pump inside the evaporator unit or in a pipe box and connect it to the drain pan. The kit includes two types of water intake tanks: one for placement directly in the drain pan, the second for connection to the drain pipe of the drain pan.

When connecting the pump reservoir to the drain hose indoor unit split system and installing a pump pump inside the housing of the indoor unit of the split system, condensate can be supplied to a height of up to 8 meters.

Technical characteristics Drainage pump Aspen Mini Aqua Silent

• Supply voltage 230V, 16W
  Max. productivity 14 l/h
• Max. water column rise height 8 m
  Maximum water temperature 40 ° C
  Noise level when water rises 1 m 19 dB(A)
  Contact alarm- potential-free, changeover, 3(5)A, 230V
• Semiconductor level sensor based on Hall effect
• Completely sealed
• Engine thermal protection
• CE compliance
• Height 28 mm Width 165 mm Depth 28 mm Weight 0.19 kg.

Installation location of Aspen Mini Aqua Silent

• - under the drain pan;
  - in a plastic box;
  - inside the body of the wall-mounted indoor unit of the split system.
  NOT intended for installation above a false ceiling.

About Aspen

Aspen was founded in 1992 by three engineers who installed air conditioning and refrigeration equipment.

When working with pumps existing on the market at that time, installation of the equipment often caused a number of inconveniences, and sometimes it was extremely difficult to remove condensate from the installations. Therefore, to meet their own needs, they developed peristaltic condensate removal pumps. This began the opening of the market for pumps that were easy to install but reliable in removing condensate.

Today, Aspen Pumps is a leading company in the UK in the design and manufacture of a range of pumps for all types and types of installations. The BBJ line is an excellent complement to numerous pump types and includes condenser block brackets, safety fuses and a range of pipe brackets and fasteners. Aspen products are specifically designed to make the work of installation engineers easier and simplify the installation process as much as possible. The key to the success of Aspen products on the market is the experience and knowledge of service engineers about the equipment and its installation.

Drainage pump Aspen Mini Aqua Silent +

Characteristics

Description

The smallest and quietest sump pump.

The Aspen Mini Aqua Silent+ drainage pump is designed to drain water into limited space(indoors only). The device is different low level noise, high performance.
The Aspen Mini Aqua Silent drainage pump is designed for installation:
- under the drain pan;
- in a plastic box;

To remove condensate, simply place the pump inside the evaporator unit or in a pipe box and connect it to the drain pan. The kit includes two types of water intake tanks: one for placement directly in the drain pan, the second for connection to the drain pipe of the drain pan.
By connecting the pump reservoir to the drain hose of the indoor unit of the split system and installing the pump pump inside the body of the indoor unit of the split system, condensate can be supplied to a height of up to 8 meters.

Aspen Mini Aqua Silent+ equipment

1. Mini Aqua Silent+ pump;
2. Reservoir (lid, sensor cable, filter mesh, float with magnet, tank body);
3. Vinyl tube (length 22 cm, outer diameter 19 mm, inner diameter 14 mm);
4. Vinyl tube (length 15 cm, outer diameter 9 mm, inner diameter 6 mm);
5. Vinyl tube (length 1.5 m, outer diameter 9 mm, inner diameter 6 mm);
6. Velco self-adhesive pile tape (2 pcs.);
7. Clamps measuring 300 x 3.6 mm (4 pcs.);
8. Clamps measuring 140 x 3.6 mm (2 pcs.);
9. Drain pan connector;
10. Noise suppressor, silicone outlet tube of blue color(1m, 6mm connector);
11. Bracket.

Installation location of Aspen Mini Aqua Silent

Under the drain pan;
- in a plastic box;
- inside the body of the wall-mounted indoor unit of the split system.

When installing the pump Aspen Mini Aqua Silent It is important to ensure that between the pump housing and hard surfaces parts of the indoor unit of the air conditioner were vibration-proofing materials, and also pay attention to the direction of water movement.

During installation you must:

1. connect the vinyl water drain hose to the pipe at the pump outlet, secure with a clamp;
2. connect drain hose to the existing system;
3. correctly connect the pump power cable to the power supply of the indoor unit of the air conditioner (using a fuse or 1A circuit breaker.
4. check the operation of the pump by pouring water into the evaporator tray (make sure the connections are tight).

About Aspen

Aspen was founded in 1992 by three engineers who installed air conditioning and refrigeration equipment.
When working with pumps existing on the market at that time, installation of the equipment often caused a number of inconveniences, and sometimes it was extremely difficult to remove condensate from the installations. Therefore, to meet their own needs, they developed peristaltic condensate removal pumps. This began the opening of the market for pumps that were easy to install but reliable in removing condensate.
Today, Aspen Pumps is a leading company in the UK in the design and manufacture of a range of pumps for all types and types of installations. The BBJ line is an excellent complement to numerous pump types and includes condenser block brackets, safety fuses and a range of pipe brackets and fasteners. Aspen products are specifically designed to make the work of installation engineers easier and simplify the installation process as much as possible. The key to the success of Aspen products on the market is the experience and knowledge of service engineers about the equipment and its installation.

Delivery in Moscow and the nearest Moscow region

Delivery is carried out by our courier service. Cost of delivery:

1. in Moscow - 250 rubles
2. outside the Moscow Ring Road - 250 + 30 rubles per km

Delivery in Moscow and Moscow Region is carried out daily from 09:00 to 20:00. Delivery on weekends and holidays.

We can deliver your order urgently - if your order is placed before 13.00, we will deliver it on the same day before 22.00, and the delivery cost will increase by 30%

Delivery period:

1. in Moscow and the Moscow region from 1 to 3 days
2. in Russia according to the operating conditions of the TC.

Free delivery is carried out within the Moscow Ring Road only for goods marked with the appropriate checkbox!

Delivery throughout Russia

We deliver to the region in two ways:

1. Requesting an invoice for payment
2. Pay the invoice (delivery to TC is calculated at the same rates as delivery in Moscow and Moscow Region)
3. We deliver your order to the shopping center office and transfer it for delivery to your region

1. You choose a transport company (TC)
2. Requesting an invoice for payment
3. Pay the bill
4. A TC representative comes to our warehouse and picks up your order.
5. In this case, you do not pay for our services for the delivery of ordered goods.

Delivery provisions

1. Upon delivery, the buyer has the right, in the presence of the courier, to check the appearance of the goods and the completeness of the delivery.
2. Verification and payment of the order must be completed within no more than 20 minutes.
3. The forwarder is not authorized to give any advice on technical parameters goods, their cost, etc.
4. Payment for goods upon delivery is made only in Russian rubles.
5. Payment is made only in office and residential premises, or in the forwarder’s vehicle.
6. Delivery by car is carried out to the entrance of the house indicated in the order form. Delivery of goods to the apartment (office) is not carried out.
7. When delivering to an area with a paid entry fee, the buyer compensates for the cost of entry. In other cases, delivery is carried out only to the place of paid entry.
8. Delivery is a separate service. It is not considered an integral part of the goods purchased by the Buyer. The delivery service ends when the client receives the goods.
9. Claims to the quality of the purchased product that arise after its receipt are considered in accordance with the Law of the Russian Federation “On the Protection of Consumer Rights” and the company’s warranty obligations.
10. After you fill out all the documents, the delivery service is considered completed. Purchasing goods with delivery does not give the Buyer the right to demand repeated delivery of goods in the event of the need for warranty service or replacement and does not provide the opportunity to carry out warranty service or replace goods by visiting the Buyer. Purchasing a product with delivery does not imply the possibility of returning the cost of the product delivery service in the case where the Buyer has the right to a refund for the product in accordance with the “Consumer Rights Protection Law”.

Every owner of an air conditioner knows that condensation is constantly released during its operation. It is removed by a special drainage system; this is precisely its main function. The selection of such a system must be scrupulous and accurate. are able to extract all moisture from a special evaporation unit and remove it through routes outside the room.

The route must be laid under right angle, otherwise the gravity flow of the condensate will be disrupted. In this case, the system will not work correctly. You need to take into account the selection of each device, including the pump. Without it, the equipment will not be able to remove condensate normally. Choosing a drain pump for your air conditioner is another snag. We will help you understand these processes in our material.

Before directly inspecting and rating the models, you need to understand when an air conditioner is needed for drainage. If condensation accumulates and does not leave the room, then a whole host of problems appear. This is the mustiness of the air, bad smell, wear and tear of air conditioning systems, its improper operation. An air conditioner drain pump can solve all these problems.

If you are wondering how to choose a drain pump for your air conditioner, you should understand what it is. This is a small pump that is connected to a sensor

The device is capable of easily pumping the liquid accumulated in the pan and transporting it outside the apartment or house. The selection of a pump for an air conditioner should be carried out together with a specialized specialist, so as not to purchase an unnecessary model.

The liquid must be removed from the premises - this is the main guarantee not only fresh air, but also your health. , which are released during the operation of air-conditioned equipment. The first units practically did not output it, so they had very short term suitability. IN modern world such problems do not arise, because there is one part inside the system - the air conditioner condensate pump.

Expert opinion

If the condensate is not removed correctly, the air conditioner begins to wear out quickly. His service life may decrease several times.

If you have a premium air conditioner, then the drainage system should be included. The element is very strong and rarely fails; if this happens, you can easily contact a repair company that will help you purchase a new part and replace it. If you have a split system budget class from a little-known brand, the pump may be missing.

It is in this case that you will need to additionally purchase and install a drainage system for the air conditioner. They all have different variations and characteristics, as well as disadvantages and advantages. It is very easy to install such a system. But deciding on the choice of drainage system for your air conditioner is the main task. Further in the material we will present the best options especially for you.

Here is an excellent option for a drainage system that can adapt to any air conditioner. In this case, the model can be either an old type or a new one. Pumps of this type are not inferior to equipment from other brands, and in some ways they are superior. At the same time, they have a very democratic and at an affordable price. The presented model, which is easy to find on the Russian market, is no exception.

ECKERLE EE 600 has a number of advantages, but the main one is a special emergency system, which directly relates to water level regulation. A three-level sensor allows you not only to predict all troubles in advance, but also to carefully configure and monitor the operation of the drainage system.

Main advantages:

1. The model has small dimensions, which allows it to be mounted in decorative box or a small niche in the housing of the air conditioner itself.
2. The ability to suck in liquid from a level that lies below the pump itself.
3. Such a drainage system makes virtually no noise during its operation. The model was specially designed for condensate removal in rooms with increased noise requirements, for example, bedrooms.
4. The model is adapted for direct use in an air conditioner with a condensate collection bath. Can work in aggressive environments and is made of very durable materials.
5. Can be easily mounted to the air conditioner drain pipe; installation takes a couple of minutes.

An ideal model for domestic consumers, which has an affordable price - prices start from 4 thousand rubles. That is, it is available to any potential consumer and owner of an air conditioner. Our rating is a solid four.

BluDiamond is a line of high-tech drainage systems and this model occupies the main place in it. The brand tested the rotor diaphragm for fifteen years and was able to perfectly tune it to work with modern air conditioners. This is what is used in the presented unit and allows you to install the pump in any position. This is an undoubted convenience and advantage over competitors.

The main difference between this pump and other options is its silent operation. It’s inaudible, as if it’s not working at all. Even in dry mode, the unit will produce minimal noise. This allows those located in children's rooms or bedrooms and it will not disturb the peace of users.

Main advantages:

1. Very interesting system working with condensate. It is sucked up by a pump using a vacuum, and then the unit with mechanical assistance directs him to the exit. All this is carried out using the pressure created by a reinforced elastomeric diaphragm.
2. Suspended solids and minor slag - the pump is so powerful that it allows the presence of these very elements in the condensate. Other drainage systems simply fail, but not this model.
3. Considering the above, it is perfect for rooms with increased level dust.
4. It has easy installation and long service life.
5. It can work in an aggressive environment and practically does not break down. You will avoid problems with a dirty valve and a stuck piston if you buy this particular model.
6. The body is very light, compact, and can be mounted in any position of the element. Often this is done in a decorative box or in corner element, which is located in close proximity to the freon pipe.

The EconoMini sump pump is a great choice for someone who really knows about pumps. It’s hard to ignore, because the manufacturer offers very attractive prices, starting from 4 thousand. Considering the price-quality ratio, this is a good option. We give the model four out of a possible five points.

The model is produced in France, where the Sauermann brand has firmly taken a leading position in the creation of mini-pumps. The company's demand extends throughout Europe, and has not bypassed Russia and all CIS countries. All of the company’s products, and our model is no exception, are made from the highest quality and reliable materials. The units are compact, easily remove condensate liquid and can operate for many years.

Sauermann Si 82 has high performance and has a centrifugal drainage system. During the creation of the model, the main emphasis is on the quality of all components of the design. This makes her really excellent choice in the modern market. The model is most often used to remove condensate from air conditioners, less often from refrigeration units and other equipment.

The power of the model allows you to remove condensate from several units at once, which can be used by the user. The pump can be used in a refrigerated display case and even in gas boiler. But the main application is powerful air conditioners.

Main advantages:

1. A serious level of power that allows you to remove condensation from several elements at once.
2. Compact size and .
3. An alarm that can turn the unit on and off at any time.
4. The above point would be impossible without special level sensors, of which there are several in the model.
5. The main part of the design is a powerful centrifugal pump.
6. Improved valve tip shape and check valve makes connecting the neutralizing cartridge easy and relaxed.
7. The model can be installed both on the floor and on a wall or ceiling suspension.

The Sauermann Si 82 drainage pump also boasts favorable price– from 3500 thousand rubles. Summarizing all the advantages and affordable prices, the model receives 5 points.

The main advantage of such a pump is its small dimensions. It is really very small and can be installed directly inside the air conditioner unit. Can also be used in industrial and semi-industrial equipment. It has a number of advantages, but due to its small size it does not have high level power. For this reason, it is suitable specifically for small apartment-type air conditioners.

Main advantages:

1. It has very quiet operation due to sound insulation.
2. High level of thermal resistance.
3. At increased load, the engine practically does not heat up.
4. Has a convenient hose.
5. Can be installed on any air conditioner model.

SLIM BOX is an ideal option for those who want to save on drainage system for air conditioner. If you search, you can buy such a pump for 2,500 rubles. But its characteristics are very limited in comparison with its competitors, so our rating is three points.

Perfect option for owners of small air conditioners who have limited inner space. Fit this category wall split systems and cassette type units. The model sensor can be easily mounted to the air conditioner drain pipe.

The main advantages of the model:

1. Almost complete absence of noise during operation.
2. High functionality, usable float sensor inclusions.
3. The excellent design makes it possible to attach the drainage pump next to the unit block, while the appearance will not be affected.
4. The element can even be installed in a pallet of the structure.
5. It is made of plastic, which perfectly dampens all noise.

Swiss quality right in front of you. An ideal option for those who are willing to pay for a truly worthwhile model. The price in our market starts from 9 thousand rubles. But every penny invested in this unit is worth the expense. Our rating is a solid five.

Final rating and conclusions

Summarizing all the characteristics, the best option, undoubtedly, Sauermann Si 82. French quality for a very low price V modern realities. But if you care about design and visual characteristics, then you should consider TATTOO 10. This is perhaps the only model that will not ruin the air conditioner and the room with its appearance. But its price may scare off a potential buyer.

Which drainage pump from these will you choose?