DIY wooden shoe rack. How to make a shoe rack with your own hands

home

Repair

What a wide variety of shoes in stores and markets! The female half cannot resist buying new shoes to go with a new dress. For men there is a choice of practical shoes and there are a lot of them too. How much inconvenience do shoes cause in the hallway? Where should I store all this at home?

The solution can be found in a furniture store, namely, buy a shoe rack or make it yourself.

Some people have a small apartment and a narrow small hallway, while others spacious house. Some live with adult children and grandchildren, while others live alone. Hallways, like families, are different, so typical pieces of furniture do not always suit a specific room. A comfortable shoe rack, created with your own hands, will help solve the problem of choice.

With it, your hallway will be transformed into a stylish and comfortable one. business card Houses.

How to choose the right thing? First, let's get acquainted with the types of furniture such as shoe racks.

Shoe wardrobe.

It is very convenient in small rooms, since the doors move apart and can be combined with the main wardrobe for clothes.

Showcase-rack with doors.

You can place shelves along the entire wall, any size of shelves, but the disadvantage of such a shoe rack is instability.

Slim-format cabinet.

This cabinet has hinged doors at an angle of 45-90 degrees. And the name speaks for itself. This type of furniture is “thin”; shoes will be located at a slope.

Tall over-the-knee shoes may become deformed on such shelves.

Galoshnitsa.

More suitable for a balcony. Shoes dry quickly on such shelves, but they are inconvenient to store.

Rack.

It is the simplest design, but unstable and unaesthetic for the hallway.

Wardrobe cabinet.

The most common and practical shoe rack.

Advantages:

With tenacity;
M multifunctionality;
K compactness;
E aesthetic.

A closed shoe rack is suitable for people with pets. It will help protect your shoes from any damage from pets.

For the cabinet you can make folding, sliding or regular doors. So it will take up little space. A shoe rack made from laminated chipboard will be durable and will not fail for a long time.

Wooden models are easy to make with your own hands, which saves the family budget.

Shelves and drawers in the closet can be made to suit any type and size of shoes. And on top there is the opportunity to make a table or cover it with fabric, a shoe rack with a seat in the hallway will come out.

The seat replaces an ottoman or stool for convenient changing of clothes.

Types of materials that can be used for shoe racks:

Metal and wood make the cabinet heavier; shoes in plastic will not breathe. MDF is a good choice, but not cheap. Most suitable material for storing shoes- Chipboard. Does not weigh down the shoe rack and is easy to assemble.

Today it is the most popular material in the shoe furniture segment.

And so, let's focus on a cabinet cabinet made of chipboard.The tools we need are:

Preparation of parts

Instructions for assembling a shoe rack with your own hands

Thickness of the chipboard + Width of the planned shelf + Half the thickness of the chipboard.

For example, a part is 12mm, shelf width is 300. It turns out: 12+300+6=318mm.

We do this from the right and left edges. Transfer the drawing directly to inside Chipboard and sign each detail where it will be located. Then you won’t confuse anything during assembly.

When marking the holes for the height and width of the shelves, you need to take into account the back part, since on this side the entire view of the cabinet is located in the same plane.

Inside, the shelves will be supported by shelf holders. You need to drill holes for them. To calculate correct location These holes must be subtracted from the height of the rack for each thickness of the partition and divided by the number of shelves.

To the result obtained, add the thickness of the shelf and half the diameter of the shelf holder.

For example, the height of the rack is 600 mm. Two shelves are planned. Shelf thickness 12 mm. The diameter of the shelf support is 5mm.

The calculation procedure will be as follows:

600-12=588

588/2=294

294+12+2=308

Therefore, you will need to measure 308 mm from the top.

After the holes are drilled, you can install the shelf supports by filling them with glue and nailing them with a hammer.

Assembling a shoe rack according to a drawing with your own hands

When all the holes are made, you can begin assembling the confirmat. We attach the middle posts to the bottom part, then the outer ones. Make sure there are no protrusions at the corner joints.We attach the lids to the corners, put the shelves on the holders and install the finished drawers on the guides.

We attach furniture handles to the doors in any location. They can also be attached to awnings, or you can install sliding ones.

Decorating a homemade shoe rack can be varied.

Hand-made furniture always distinguishes the interior from other apartments where there are typical chests of drawers and wardrobes.

VIDEO: DIY shoe cabinet.

This furniture accessory for the hallway can be bought ready-made, but it is better when the shoe rack is assembled with your own hands in the style of the room. In many cases, this is justified not only by considerations of economy, but also by lack of free space.

What is it like, a shoe rack in the hallway?

The hallway in a city apartment is not spacious. Everyday shoes, which are taken off when entering the apartment, and house slippers often clutter it, and it seems impossible to install a shoe rack.

In a small hallway convenient option there may be a combined design with a seat and shelves underneath, which will provide space for storing shoes and a small bench for putting them on. By replacing a simple stool or ottoman with this design, it will be possible to solve the problem of boots and shoes lying around, even in a large family.

An option for such a shoe rack could be pull-out shelf with a door panel behind which the contents will be hidden under the seat. You can make such models yourself, decorating them to match the style of the hallway:

for rustic interiors, wicker or wine boxes can be installed in a body made of thick plywood or MDF, and the upper part can be used as a seat;
for Victorian or classic styles the same base can be decorated with plastic molding and a velvet cushion on the seat, or a door can be hung to hide the contents of the shelf;
By covering the body with a plain film and without resorting to excessive decoration, you will be able to get a minimalist piece of furniture for a formal hallway.

A small space behind the door can be rationally used if you hang tiered shelves on a canvas or wall.

But most often there are shoe racks, which are openwork structures made of racks and shelves attached to them. They differ from each other only in material and size.

DIY shoe rack: what to assemble from?

You can make a shoe rack with your own hands from any available materials. Craftsmen assemble furniture from leftovers from apartment renovations:

boards and bars;
drywall;
scraps of plastic and metal pipes.

For making shelves, parts from waste material: cardboard or plastic containers.

The most common option for a shoe rack in the hallway of a home is a plywood or plank structure. The material is easy to process and the wooden shelf is durable. Its disadvantage is low moisture resistance, therefore street shelves They are rarely built from wood.

A good outdoor shoe rack will be made of metal or plastic. Such products will last for decades, and you can come up with many options for how to make a shelf for a hallway, using the qualities of the selected material.

Homemade shelves for the hallway

Deciding how to do shoe shelf, the master should evaluate his skills and abilities, select necessary materials and prepare the tools:

for woodworking you will need a hand or electric saw;
when using metal or plastic tubes, a hacksaw will be useful;
cardboard and plastic can be cut with a knife;
fastening materials for a small product - screws for wood or metal;
drill with drills and bits for self-tapping screws;
to connect cardboard parts or decorate, you will need glue;
you can finish a finished shoe rack self-adhesive film, remnants of wallpaper, paint or varnish.

If the product is intended for outdoor use, it is advisable to protect the metal from corrosion and the wood from rotting. For this purpose, impregnation and enamels for exterior use are used.

Cardboard version

Budget and simple shelf will come out of a large cardboard box. To make it you need thick corrugated cardboard. Having measured the space for the shelf in the hallway, you need to determine the required width and length of the cardboard container. To ensure neat edges and greater strength of the product, the valves of the bottom and lid should not be cut off. It is better to bend them inside the box and glue them to the walls.

For tiered shelves, you need to cut rectangular parts from another box. Their width is equal to the depth of the body, and their length is equal to its length with 2 allowances. The dimensions of the latter must be determined individually: they must correspond to the distance between the tiers. Bend the allowances upward and glue the shelves inside the body. Treat the product with decorative self-adhesive film to protect it from moisture.

You can also make a shoe rack made of cardboard on the wall with your own hands, taking up minimal space behind the door leaf. To make it, you need to select several large boxes from which you can cut rectangles measuring 60x70 cm. Cutting and assembly is done as follows:

Set aside 20 cm from the edges of the long sides. Draw lines that will divide the workpiece into 3 parts.
Set aside 25 cm from the top of the workpiece along the short sides and connect the points with a straight line. The workpiece will form a T-shaped figure that needs to be cut out.
Along the top of the cardboard letter T, set aside 11 cm from the edges and mark these points.
Connect each mark to the corner formed by connecting the crossbar of the T to its leg. You should get 2 slanted lines.
Pressing the cardboard with a ruler, bend the workpiece along all existing lines, bending the parts upward. It’s easy to roll cardboard into a fragment of a future shelf. In this case, the triangles on the edges of the crossbar need to be placed on the wrong side of the leg of the letter T.
Using silicate or any universal glue, secure the triangles. If you do everything correctly, you will get a convenient pocket with a protruding upper part. Make as many such pockets as necessary to create a shelf.
Decorate the details to your taste: cover with film or wallpaper, paint, add the necessary details. Connect the fragments, bringing the parts protruding above the pocket to the wrong side above the tier. Use glue for fastening.

Make holes on the topmost pocket for hanging and place the shelf on the wall.

If you cut out many identical parts representing the type of shelving of the required dimensions from the facade, and then glue them all together, you will get a product in the spirit of European fashion designers. Between identical slats you can install spacers made of small pieces of cardboard. Then the shoe rack will turn out to be openwork.

Pipe construction

Metal tubes can be used different ways. Shiny chrome parts will help create an interior accessory in a high-tech or minimalist style. These parts are used to assemble the basis of the structure - the frame struts. You can connect them with tubes smaller diameter or chrome-plated utility shelves-lattices. For connections, use self-tapping screws and bolts with nuts.

For a fashionable loft or techno shoe shelves assembled from pipes with your own hands in the form of a pipeline. The craftsman needs skills in working with metal and taps for cutting threads. You can connect the pipes plumbing fittings different shapes.

From profile pipe craftsmen collect bent and forged products. But such work can only be done if there is equipment for cold forging. Parts of the structure are welded or connected with threaded fasteners. Elegant forged shoe racks made from pipes are appropriate even in classic interiors.

Plastic construction

When the apartment's sewer system is replaced, new PVC pipes are cut large diameter used for making various organizers. A shoe rack in the hallway, made in this style, will take up minimal space. It can be placed on the floor or hung on the wall. The length of 1 fragment should not exceed the shoe size of the apartment owners. You can determine this parameter individually or cut the PVC pipe into pieces 27-30 cm long.

Film, wallpaper, and paint are used for decoration. You can connect the parts of the structure with bolts or short self-tapping screws, or use superglue for PVC. The segments are placed on top of each other or form a honeycomb structure of any shape. When the assembly is completed, it is advisable to fix the shelf by attaching the upper part to the wall.

A small hallway space can be easily used rationally by strengthening the lower parts plastic bottles large diameter directly on the door, the wall behind it or the wall of furniture. With this method, you can occupy a small partition near the door, placing the bottom parts of the bottles one above the other to any convenient height. The easiest way to fasten is with self-tapping screws, screwing them into the bottom of each part.

From scraps plastic pipe and panels (wall, window slopes etc.) it is easy to build a rack-type structure by attaching straight shelves from panels to racks from pipe sections. The design is also suitable for outdoor use, as it is not subject to corrosion and rotting. A more complicated version will require connecting vertical and horizontal pipes using fittings. By using scraps of transparent polycarbonate, you can give the shelf some airiness. Plastic parts easy to connect with self-tapping screws.

Metal shoe rack

From the remnants of the metal profile for installing drywall, you can also assemble convenient shelves for shoes in the hallway with your own hands. The design will be strong enough to serve as a seat, under which you can place several tiers for storing slippers and boots.

It is required to make 4 parts vertical racks the same length. To connect them, you will need 2 short and 2 long crossbars for each tier. A variant of a simple design is a product made from racks that are connected by ready-made lattice shelves or parts from old household appliances (refrigerator, oven, etc.).

Using soft welding wire (up to 1 cm thick) for work, it is easy to simulate forged product, connecting bent parts by welding or clamps made of thinner wire. Segments welding wire easy to bend without special equipment using only a vice and pliers.

To shape the end parts of the parts, the wire must be heated in a flame gas burner and hammer it down. The design of the shoe rack is chosen at your own discretion, but its basic principle is a rack of twisted decorative vertical posts and horizontal crossbars connecting them.

A metal shelf can also be built from empty tin containers (coffee cans, paint, etc.). The parts are attached directly to the wall, as indicated for the shelf made of plastic bottles. Using tins different sizes you can create not just a shoe shelf, but also decorative panel, having additional functions shoe racks To make it mobile, you need to attach the tins to a plywood base.

Wooden shoe design

Make a shoe rack with my own hands made of wood is not too difficult. At the core simplest design The principle of shelving is based on: 4 racks made of bars, connected by boards or the same bars. Beautiful shelves are obtained by combining wood and transparent plastic (for shelves) or lattice metal parts.

If you have a jigsaw and lathe a craftsman is able to create beautiful shelves for shoes made of wood with decorative posts or carved sides. For minimalist interiors, it is enough to cut 2 identical boards without decoration for the side parts and several tiers connecting them. For the door, you can use a panel made of chipboard or MDF or a rectangle of plywood. To open such a door, use small furniture hinges installed on its lower edge.

The body consists of 2 sides, a bottom and a lid. Horizontal parts need to be cut so that they extend slightly beyond the vertical sides.

To assemble a shelf with your own hands, you need self-tapping screws and 1 metal stud with threads and nuts. Assemble the shelf like this:

Strengthen the drum partitions around the central hole, along the radii of the circle. Fastening with self-tapping screws. Install the second circle, securing it with self-tapping screws.
Drill holes for the pin in the center of the lid and bottom. Assemble the body using self-tapping screws, placing the sides between the bottom and lid parts. The distance between the sidewalls is 1-2 cm greater than the diameter of the drum. Attach legs 2-2.5 cm high to the bottom part. They can even be made from plastic bottle caps.
Pass the pin through the holes in the cover, drum and bottom. If there are several drums, they should be separated with washers. Screw nuts onto the ends of the studs.

The dimensions of this shoe rack are at least 65x65 cm, so it is suitable only for a spacious hallway.

Corner shoe rack

In the partition behind the door you can place racks for shoes: you make them yourself from waste scraps. To make the simplest model, screw supports made of bars or metal profiles onto adjacent walls. On them you can mount triangles or squares made of boards, plastic, lattice parts, etc. planes on which it is easy to place 1-2 pairs of shoes. The height of the structure is dictated only by the convenience of the apartment owner.

To make a movable corner shelf for shoes, cut out rectangular sides and triangular parts for the lid and bottom from plywood or chipboard. They should be slightly larger than the corner formed by the sidewalls. If internal tiers are needed, the dimensions of the legs of the parts must correspond to the internal length of each sidewall.

Assembly begins with the sides and connects them with self-tapping screws and a furniture corner. The bottom and lid are attached in the same way: with self-tapping screws through holes in the plane of the parts. The fasteners must be driven into the edge of the sidewalls and screwed in flush. For shelves, you can install supports from thin planks or fasten the parts to the corners.

What do you do with old furniture?

How to save and make original stand under your own shoes - find out here!Ideas, useful tips, manufacturing instructions.

1 Let's do stylish stand DIY under shoes
2 Types and purpose homemade shelves for the hallway
3 Materials and tools for making shelves
4 How to make a shelf with your own hands
5 Wooden shoe rack
- 5.1 What will you need?
- 5.2 Assembly of the structure
- 5.3 Practical shoe rack from chipboard
- 5.4 Beautiful shelf for laminate shoes
6 From profile
- 6.1 Step-by-step instruction
- 6.2 Simple shoe rack made from boxes
- 6.3 Corner stand under shoes
- 6.4 Construction connection
- 6.5 Decorative elements
- 6.6 Making a carousel shelf
- 6.7 How to do
7 Interesting ideas
8 Photo gallery

A beautiful shoe rack can become not only a place to store shoes, but also a full-fledged element of the hallway interior. The choice of options in stores is extensive, but the prices are often overpriced. To make a roomy and compact shelf For shoes that fit perfectly into the look of the corridor, you need to put in a little effort and imagination. Let's consider options for making shoe racks from available materials with your own hands.

Types and purposes of homemade shelves for the hallway

Before installation, be sure to measure the space where you plan to place the shoe rack. For small hallway ideal option there will be a narrow (20-30 cm) and high shelf; in a more spacious room, a closed cabinet with a width of 60-90 cm will look good.

Should the shelf be closed? If you want the hallway to look more aesthetically pleasing, this is a good option. Do not forget to regularly ventilate closed shoe racks, otherwise you will not be able to avoid unpleasant odors. This problem can also be solved by installing a lamp inside for drying and disinfecting shoes.

The advantages of homemade shoe shelves are obvious:

you can use eco-friendly materials;
the cost of a homemade shoe rack is several times less than in a store;
You can make a shelf for a hallway with a non-standard layout.

The design of a shoe rack directly depends on its purpose and the number of residents. Here are some popular and practical options:

Shoe shelf design	Description
Classical	Shoe shelves of this type are popular due to their simple and convenient installation. It can have a regular rectangular or asymmetrical design.
Hanging	The shelf is attached to the wall using slats, straps or cables. Conveniently folds when necessary (for example, if you need to carry furniture into a narrow corridor).
Corner	Fastening is carried out on adjacent walls. Great space saver.
Floor	The support in this design is on the floor. Suitable for spacious hallways, but can also have compact dimensions if the sections are distributed not in width, but in height.
Closed	This option looks more aesthetically pleasing. Doors can be made of plywood or frosted glass.
Cassette	Shoes will be stored vertically here; there are 2 or more cassette-type drawers on the door, which slide out when opened. Good for small corridor(width 20-25 cm).

There are many options for making shelves. The interior can be decorated with shelves made of metal, in particular aluminum; processed clay shelves, dense oak, and glossy plastic look very beautiful. The material of manufacture can be anything, as can the configuration of the elements. Based on the type of installation, shoe racks can be divided into several types.

Materials and tools for making shelves

The selected material for making a shoe rack determines its service life and ease of use. For example, it’s easier to make a shelf out of a cardboard box, but it won’t last long. But as a temporary option it will work great.

When choosing wood as a material, you should take care of the final treatment of the wood with varnish or paint to ensure an attractive appearance preserved for a long time. There is no universal set of tools, due to the peculiarities of installation and material. But you will probably need the following tools:

electric drill;
glue;
simple pencil;
sandpaper;
mounting hardware;
screwdriver;
wood hacksaw;

You will also need varnish or paint, the color of which is selected to match general interior hallway

How to make a shelf with your own hands

Before starting work, it is worth drawing an approximate layout of the future product, where you also need to indicate the dimensions. After this, they begin marking on the material, where they indicate the location of the fasteners (if any), the required length and width. Here are a few useful recommendations:

When creating a simple shelf for shoes, you can do without using metal fittings - all elements are fastened with self-tapping screws.
The doors are easy to install if you use awnings.
Materials should be treated with varnish or painting before assembly. If you do this after, the layer will be uneven, and the procedure itself will be problematic. The process of assembling a shelf for shoes depends not only on the design, but also on the complexity of processing the material, and the features of working with it.

Wooden shoe rack

First of all, a shoe rack should have small dimensions, but at the same time accommodate a sufficient number of pairs of shoes. This is its integral feature. Materials from which you can build this design, many, but the main one is wood. Unlike chipboard and MDF, it will not unstick or swell when exposed to moisture. To do this, the wood should be varnished or painted.

What will you need?

Basic kit for making: wood, glue, screws, glazing beads, varnish or paint. Tools you will need: saw, screwdriver or screwdriver, hammer, sandpaper, drill. Beads, screws, and drill are selected in accordance with the size of the structure. Self-tapping screws need to be small, but capable of being firmly fixed in the structure. Please remember that wood may crack or split if wrong choice screw size.

Assembly of the structure

A depth of 35 centimeters will be sufficient. This distance is enough to accommodate almost any shoe. This will be the length of the sides of the structure. You need to saw off 6 elements of 35 cm each. You can determine who in the family has the largest shoe size and measure the distance along it, leaving 1 cm in reserve. Then you need to distribute 4 bars on one of the elements and make a cut to the depth of the bars. The bars must be spaced evenly.

Each shelf should be able to accommodate 3 pairs of shoes, so its length must be determined based on the 3 largest pairs of shoes in the family. 4 pieces of this length will go on each shelf. To connect the elements, it is necessary to cut out recesses. These places must be secured with self-tapping screws. For a more aesthetic appearance, you can drill holes and use glazing beads and glue that will hold the shoes without any problems. This operation is similar for each shelf. After this, sand the tops of the side panels with sandpaper.

Any height can be set, but a reasonable limit is no higher than 80 cm. High shoes should fit in one of the compartments of the structure. The distance between the shelves (between the floor and the first shelf) should be 30 cm. All connections are made in the same way.

Practical shoe rack made of chipboard

To make a simple shelf for shoes from chipboard, you need to take two sheets of canvas (the dimensions are determined based on the space in the hallway). Will need fiberboard sheet for the back wall. The assembly algorithm is simple:

We attach the bottom and the shelves themselves to the two side walls. For the screeds, use a drill (8 mm drill); at the end, use a drill with a diameter of 5 mm.
The folding element is secured with medium-sized self-tapping screws;
Top part fastened with 4*30 self-tapping screws;
The shelves are mounted inside;
Fasten back wall products.
This is a budget and uncomplicated option that can be used in any hallway layout.

Beautiful laminate shoe rack

If after renovating your apartment there is unused laminate, you can use it to make a stylish and compact shelf that will fit seamlessly into any design. For production you will need laminate sheets, the number of which depends on the tier and metal pipes with slots. They can be made using a metal grinder. If desired, the structure can be made to any height; for safety, the edges of the tubes are sealed with plugs.

From profile

An interesting option are shelves for shoes made of profile and tempered glass (or wood). For manufacturing you will need the following tools:

glass cutter;
jigsaw;
Bulgarian;
level;
electric drill for metal;
screwdriver

You can use a regular colored profile or a galvanized one; the second option will be more reliable, as it is resistant to moisture.

Step-by-step instruction

The profile is attached to the wall with one self-tapping screw;
Using a level, check the horizontalness of the markings;
Screw in the remaining screws;
The frame is assembled;
Already cut shelves are attached to the frame.
This option will look good in a Hi-Teck design.

Simple shoe rack made from boxes

The presented design is able to withstand a lot of weight, despite the fact that cardboard is a fairly flexible material. To make it, it is advisable to use boxes from household appliances. Depending on the height and width, take required amount boxes The structure is attached with glue, tape, a stapler or another method. The finished shelf can be decorated as your imagination dictates. There is one drawback - this shelf is only suitable for summer shoes.

Corner shoe stand

The most suitable material for creating corner wooden shelf for shoes - larch. It tolerates dampness well and is easy to use.

First, we decide on the size and design of the shelf, draw a diagram and calculate the required amount of material.
For creating corner shelf necessary following materials and tools:

two boards up to 2 m long (the ends of the boards can be rounded or cut with a wave);
shelves cut from the same board (the shelves can be cut into different sizes and shapes);
jigsaw for cutting;
plane and sandpaper for leveling;
corners and screws for connecting parts;
level to check the accuracy of the design;
antiseptic;
varnish or paint.

The boards must be sanded and treated with an antiseptic, varnished or painted. Varnish is chosen if you want to emphasize the naturalness and structure of the wood, paint - if preferred rich colors and when deciding to use special design techniques with color play.

Construction connection

To create a lightweight structure, the two main boards are not attached to each other: they are installed at an angle and connected using shelves. First, the lower shelf is attached, then the upper one, the structure is installed vertically and its evenness and stability are checked. Then the remaining shelves are installed.

The space between the shelves must be sufficient, otherwise there will be a feeling of crampedness and congestion.

Decorative elements

For additional decoration of the shelf, you can use thin decorative slats, cut out yourself. Or purchase a decorative wooden lattice partition, and after sawing it, decorate the shelf by adding carved stops.
Using decoupage or aging techniques in painting will also add a fresh touch to the interior of the hallway. Bright color solutions may be relevant to complement the interior.

Making a carousel shelf

The carousel shelf takes up little space and at the same time can accommodate many pairs of shoes. To make it you will need: fiberboard, metal pins and screws.

How to do

Blanks in the form of circles and quadrangles are cut from fiberboard. Using a compass and a strip, markings are made for the pins.
Discs for stands are fixed with discs of smaller diameter, which are placed at the desired height.

Prepare the bottom, on which quadrangular blanks are installed, attached with a corner. The bottom circle is conventionally divided into 3-4 parts (space for 3-4 pairs of shoes on the “floor”).

Interesting ideas

To make a shoe shelf, you can use your imagination and then the most interesting ideas come to mind. unexpected decisions. Here are a few ideas that will be of interest not only to independent use, but also as a gift for loved ones.

On video: DIY shoe rack from an old closet

Find out how to save money and make an original shoe stand with your own hands here!Ideas, useful tips, manufacturing instructions.

Making a stylish shoe stand with your own hands

A beautiful shoe rack can become not only a place to store shoes, but also a full-fledged element of the hallway interior. The choice of options in stores is extensive, but the prices are often overpriced. To make a spacious and compact shoe rack that fits perfectly into the look of the corridor, you need to put in a little effort and imagination. Let's consider options for making shoe racks from available materials with your own hands.

Types and purposes of homemade shelves for the hallway

Before installation, be sure to measure the space where you plan to place the shoe rack. For a small hallway, the ideal option would be a narrow (20-30 cm) and high shelf; in a larger room, a closed cabinet with a width of 60-90 cm would look good.

Should the shelf be closed? If you want your hallway to look more aesthetically pleasing, this is a good option. Do not forget to regularly ventilate closed shoe racks, otherwise you will not avoid unpleasant odors. This problem can also be solved by installing a lamp inside for drying and disinfecting shoes.

The advantages of homemade shoe shelves are obvious:

you can use eco-friendly materials;
the cost of a homemade shoe rack is several times less than in a store;
You can make a shelf for a hallway with a non-standard layout.

The design of a shoe rack directly depends on its purpose and the number of residents. Here are some popular and practical options:

Shoe shelf design	Description
Classical	Shoe shelves of this type are popular due to their simple and convenient installation. It can have a regular rectangular or asymmetrical design.
Hanging	The shelf is attached to the wall using slats, straps or cables. Conveniently folds when necessary (for example, if you need to carry furniture into a narrow corridor).
Corner	Fastening is carried out on adjacent walls. Great space saver.
Floor	The support in this design is on the floor. Suitable for spacious hallways, but can also have compact dimensions if the sections are distributed not in width, but in height.
Closed	This option looks more aesthetically pleasing. Doors can be made of plywood or frosted glass.
Cassette	Shoes will be stored vertically here; there are 2 or more cassette-type drawers on the door, which slide out when opened. Well suited for a small corridor (width 20-25 cm).

Materials and tools for making shelves

The selected material for making a shoe rack determines its service life and ease of use. For example, it’s easier to make a shelf out of a cardboard box, but it won’t last long. But as a temporary option it will work great.

When choosing wood as a material, you should take care of the final treatment of the wood with varnish or paint so that the attractive appearance is preserved for a long time. There is no universal set of tools, due to the peculiarities of installation and material. But you will probably need the following tools:

electric drill;
glue;
simple pencil;
sandpaper;
fastening fittings;
screwdriver;
wood hacksaw;

You will also need varnish or paint, the color of which matches the overall interior of the hallway.

How to make a shelf with your own hands

When creating a simple shelf for shoes, you can do without using metal fittings - all elements are fastened with self-tapping screws.
The doors are easy to install if you use awnings.
Materials should be treated with varnish or painting before assembly. If you do this after, the layer will be uneven, and the procedure itself will be problematic. The process of assembling a shelf for shoes depends not only on the design, but also on the complexity of processing the material, and the features of working with it.

Wooden shoe rack

First of all, a shoe rack should have small dimensions, but at the same time accommodate a sufficient number of pairs of shoes. This is its integral feature. There are many materials from which this structure can be constructed, but the main one is wood. Unlike chipboard and MDF, it will not unstick or swell when exposed to moisture. To do this, the wood should be varnished or painted.

What will you need?

Basic kit for making: wood, glue, screws, glazing beads, varnish or paint. Tools you will need: saw, screwdriver or screwdriver, hammer, sandpaper, drill. Beads, screws, and drill are selected in accordance with the size of the structure. Self-tapping screws need to be small, but capable of being firmly fixed in the structure. It must be remembered that wood can crack or split if the size of the screws is chosen incorrectly.

Assembly of the structure

Practical shoe rack made of chipboard

To make a simple shelf for shoes from chipboard, you need to take two sheets of canvas (the dimensions are determined based on the space in the hallway). You will need a sheet of fiberboard for the back wall. The assembly algorithm is simple:

We attach the bottom and the shelves themselves to the two side walls. For the screeds, use a drill (8 mm drill); at the end, use a drill with a diameter of 5 mm.
The folding element is secured with medium-sized self-tapping screws;
The upper part is attached to 4*30 self-tapping screws;
The shelves are mounted inside;
Secure the back wall of the product.
This is a budget and uncomplicated option that can be used in any hallway layout.

Beautiful laminate shoe rack

If after renovating your apartment there is unused laminate, you can use it to make a stylish and compact shelf that will fit seamlessly into any design. For manufacturing, you will need laminate sheets, the number of which depends on the tiers, and metal pipes with slots. They can be made using a metal grinder. If desired, the structure can be made to any height; for safety, the edges of the tubes are sealed with plugs.

From profile

An interesting option are shelves for shoes made of profiles and tempered glass (or wood). For manufacturing you will need the following tools:

glass cutter;
jigsaw;
Bulgarian;
level;
electric drill for metal;
screwdriver

You can use a regular colored profile or a galvanized one; the second option will be more reliable, as it is resistant to moisture.

Step-by-step instruction

The profile is attached to the wall with one self-tapping screw;
Using a level, check the horizontalness of the markings;
Screw in the remaining screws;
The frame is assembled;
Already cut shelves are attached to the frame.
This option will look good in a Hi-Teck design.

Simple shoe rack made from boxes

The presented design is able to withstand a lot of weight, despite the fact that cardboard is a fairly flexible material. To make it, it is advisable to use boxes from household appliances. Depending on the height and width, take the required number of boxes. The structure is attached with glue, tape, a stapler or another method. The finished shelf can be decorated as your imagination dictates. There is one drawback - this shelf is only suitable for summer shoes.

Corner shoe stand

The most suitable material for creating a corner wooden shoe rack is larch. It tolerates dampness well and is easy to use.

First, we decide on the size and design of the shelf, draw a diagram and calculate the required amount of material.
To create a corner shelf you need the following materials and tools:

two boards up to 2 m long (the ends of the boards can be rounded or cut with a wave);
shelves cut from the same board (the shelves can be cut into different sizes and shapes);
jigsaw for cutting;
plane and sandpaper for leveling;
corners and screws for connecting parts;
level to check the accuracy of the design;
antiseptic;
varnish or paint.

The boards must be sanded and treated with an antiseptic, varnished or painted. Varnish is chosen if you want to emphasize the naturalness and structure of the wood, paint - if you prefer rich colors and if you decide to use special design techniques with a play on color.

Construction connection

The space between the shelves must be sufficient, otherwise there will be a feeling of crampedness and congestion.

Decorative elements

Making a carousel shelf

The carousel shelf takes up little space and at the same time can accommodate many pairs of shoes. To make it you will need: fiberboard, metal pins and screws.

How to do

Prepare the bottom, on which quadrangular blanks are installed, attached with a corner. The bottom circle is conventionally divided into 3-4 parts (space for 3-4 pairs of shoes on the “floor”).

To make a shoe shelf, you can use your imagination and then the most unexpected solutions come to mind. Here are a few ideas that will be interesting not only for independent use, but also as a gift for loved ones.

On video: DIY shoe rack from an old closet

I remembered the famous number from KVN about the married couple Igor and Lena. Lena has a lot of shoes; she has filled a whole closet with them. Igor begins to liberate shoe boxes and it’s hilarious to be indignant at the wife’s irrationality and wastefulness. The audience laughs, the men give a standing ovation. Igor himself has one pair of shoes for all occasions. At the end of the number, sitting peacefully next to his wife, the husband utters the catchphrase:

I realized how many pairs of shoes a woman needs to be happy.

How many?

One more than she has.

To which Lena replies:

What lesson can be drawn from this story? You need to store your shoes correctly and carefully, and then no one will find out how many of them you have and why you need them in such quantities.

Now we will dwell on the problem of storing wearable shoes; in other words, we will tell you where to hide a bunch of shoes, slippers and boots from the corner of the hallway. Simple and rational decision- place it on the shoe shelf. The option of purchasing this piece of furniture in a store seems simple only at first glance. Such a small-sized item is not so easy to find; as a rule, it comes with a set of furniture for the hallway. Separately, it is not always possible to choose something suitable in size, design and wallet. But you can always do it yourself.

And here our imagination and skills acquired in labor lessons come to our aid.

There are a lot of options, let's look at some of them.

How to place shoes at home

First, you need to decide what you want, and most importantly, you can make a shelf for storing shoes. Different materials can be used for this; each of them has its own disadvantages and advantages. A PVC product will be light in weight, easy to clean, because it can be easily washed, but in order to work with it you need a tool and skill. Wood is good for everyone, except that to work with it you need a tool, a place and at least basic knowledge of carpentry. Cardboard is easy to work with and convenient, but during use it can become deformed from pressure and moisture. Look at the options offered and decide which side you are on.

Shoe rack “Woodpile” made of PVC pipes

This option is suitable for placing indoor, summer and demi-season adult shoes or for any children's shoes. High boots will have to be placed separately.

We purchase sewer pipe made of PVC, diameter 30 cm.
Use a hacksaw to cut into sections 30–35 cm long, depending on maximum size shoes in the house. A length of 30 cm is enough for size 42. If you need more, attach the boot to the pipe and measure the required length.
We sand the edges with fine sandpaper to make them smooth.
Since the shelf is called a woodpile, we cover the pipe sections with wood-look wallpaper. If such a design does not fit into the overall concept of the hallway, choose another design that is more suitable in style and color.
We glue four blanks together epoxy glue, purchased at a hardware store. We fix the row using clothespins, pliers or special clamps, if available.
In the same way, we make two more rows of three blanks each.
Let us make a reservation that here we offer one of many options for combining design fragments. If you wish, you can assemble a shoe rack of a different shape and size. There can be as many sections as you like, up to occupying the entire wall with them, if it is functionally justified (it is inconvenient to get shoes from a great height, but you can place out-of-season or rarely used items there).
We assemble a “woodpile” from three rows of cells in the following order: at the bottom and at the top there are rows of three sections, in the middle - of four. We put it against the wall.
Voila, original rack ready for shoes.

The “Woodpile” rack is good for everyone, but it would hardly suit Lena from KVN. After all, you can put exquisite high-heeled shoes in there, but somehow it’s not comme il faut. Especially for Lenin’s stilettos, there is a mega simple version of a shoe shelf called “Cornice”

Photo: Storage option “Cornice”

It is convenient to place high-heeled shoes on the ledge Unusual uses cornice, as a shelf for “studs” Any cornice is suitable for serving as a shoe shelf You can organize a whole shoe rack by attaching several curtain rods under each other

We take any window cornice and cut off a part of the required length.
Attach the cornice to the wall.
We hook the shoes with the heels to the cornice and hang them up. It turns out to be a witty shelf for your favorite heels.

DIY wooden shelf “Bristles”

Making this shelf requires a little more work than the previous two.

It is made from plywood and shoe brushes.

The first thing you need to determine is the length and width of the future shelf. In order to calculate the length as accurately as possible, you should take into account the parameters of the plywood and the number of brushes that you intend to place on this plywood. The width of this part of the shelf should be 5 cm greater than the width of the brush.
Having decided on the parameters, we cut out 2 identical blanks.
We connect them together with a “book” as shown in the picture.
We drill holes on the long part of the shelf at a distance of 1 cm from the edge. We place the second board on its end and use screws to connect the two fragments. On the sides we attach a square of the same width from the same plywood.
If the brushes have handles, cut off the handles. We straighten the edges of the cut using a file.
We drill holes in each brush on both sides. We screw the brushes to the inner surface of the shelf with the bristles facing out, as shown in the photo. The first part of the shelf is ready.
For the second part, we take a sheet of plywood and make it the same length as the first, and 35–40 cm wide, depending on the big size shoes in the house. Width 35 cm is designed for shoes size 43.
We saw off another board of the same length, 15 cm wide.
We attach the small board to the large one with screws so that we get a side (we drill holes in the large one 1 cm from the edge, attach the small one with the end and drive the screws into the holes on one side and into the end of the board on the other side).
On the opposite side from the side we drill 3 holes closer to the corners of the large board in the following way: one hole on the long side, two on the short side. The distance between the holes depends on the width of the first part of the shelf with the brushes inside. Suppose the width of the shelf is 15 cm, then we make holes at a distance of 2.12 cm from the corner. On the long side we make an indent of 5 cm from the corner.
Using screws, we assemble a shelf from two blanks.
Paint the finished shelf in your favorite color. After the paint has dried, drill 2 holes in the central board and attach all this splendor to the wall.

Using the same principle, you can make a simpler version. Essentially, these are just two planks nailed to the wall parallel to each other at a close distance.

Shoe rack “Carousel”

If there is a person in the family who has the skills of a carpenter, has tools and a workshop, and at the same time, for some unknown reason, does not know how to make a shoe rack, show him this video. Everything looks easy and accessible on the screen. Just first you need to prepare: a sheet of plywood, nails, wood glue, turntables, paint.

Video: how to make a shelf from improvised means for storing shoes

And now, pay attention to the screen:

Simple production of pockets from cardboard “Guests on the threshold”

Anti-waiting cardboard is often used in making shoe storage sections. Although it sounds a little fantastic. The video shows how you can make durable and original pockets for storing slippers and summer shoes, armed only with a cardboard box from a vacuum cleaner, scissors and good glue. Even the most physically unprepared segments of the population - old people, women and children - can easily do such a thing. So, get it household appliances out of the boxes and start actively viewing.

Another cardboard version of the shoe rack from the “get creative with the kids” series.

Shoe rack “Triangle”

We take the same as a basis carton boxes, whose design potential is as inexhaustible as an atom.

So, we will need: cardboard boxes, colored wide tape, scissors, ruler, glue.

We cut out a rectangle from cardboard with sides 45x35 cm, so that even a large shoe can find a home on the shelf.
Using a ruler, make 2 folds at a distance of 15 cm from the edges of the long side.
We cover the edge of the side from which the folds go vertically with tape - this will be the front façade of our section.
We fold a triangle along the folds, paste it with tape on top along the edge, and also in several other places along the fold.
In our case, we make a total of 13 sections in a similar way. You can vary this number in any direction at your discretion.
We assemble the bottom row of the rack from four sections. We glue them together with tape. You can stop there, or you can glue a sheet of cardboard with glue to strengthen the structure, but this will not add elegance to your structure.
We assemble the second row of five modules, fasten them together and glue them with tape to the bottom row. And so on.

Attention! Peculiarity cardboard structures is that you cannot store wet and dirty shoes in them.

Shoe cabinet “Magic box”

Do you live near a grocery store and are you annoyed by the stack of boxes outside your windows? Your husband bought a case of beer and now you have a drunk man, glass containers and an empty case in your house? Then you're in luck! Make a drawer into a bedside table or shoe shelf because... physical work calms the nerves!

You can simply move a plastic box to the wall in the hallway, cover it with rubble and place dirty and wet boots and shoes in it. You can also use a tray with sides or a plastic tray for these purposes.

Several boxes are easily fastened together with a plastic clamp or ordinary wire, placed “on the butt”, moved towards the wall, or better yet, attached with the same wire to a pipe or some other protrusion, and now we have several sections for storing shoes or something more.

You will have to tinker a little with wooden boxes.

Sand the surface of the box with fine sandpaper.
Cover with paint.
Hang on the wall.

You can also adapt wooden pallet.

It’s not easy to make such a shoe rack, but it’s very simple. Eco-friendly shoe racks made from wooden boxes You can make a cabinet out of the boxes by placing them on top of each other and securing them with nails The pallet can be converted into convenient shelf for boots and sneakers

Sections