How to make paper glasses with your own hands. How to make virtual reality glasses from cardboard? Cut out cardboard design

The art of origami allows you to make a wide variety of things from paper, from fruits to vehicles, executed with amazing precision. Below we will talk about such a necessary thing as glasses. We'll tell you how to make glasses out of paper.

Paper glasses

How to make glasses out of paper? Very simple. You just need to follow all the recommendations. You will also need a little care and patience. After all, everything starts to work out with practice.

Let's look at how to make glasses out of paper. You will need an A4 sheet of paper. If you want the glasses to be colored, take paper of the desired color. You don't need anything else, except maybe a little inspiration.

Let's make paper glasses together

So, let's get down to the craft itself.

1. Connect the lower left corner to the upper right. Press the fold line well.
2. Bend the resulting figure in half again.
3. Unfold the sheet and then fold it diagonally along the existing line.
4. Bend the tops of the two resulting triangles slightly.
5. Bend the shape so that only half of these triangles are visible.
6. Bend bottom part lengthwise and in half again.
7. And then again. This can be a bit difficult since the paper has already been folded several times.
8. And finally, bend with right side a thin strip to the beginning of the triangle. Repeat the same on the other side.

That's all, actually. This is how you can easily and very quickly make paper glasses. As you can see, there is nothing complicated about this, and even a child can make such a craft if you show him.

What does it take to make virtual reality glasses?

However, if you want to learn how to make virtual reality glasses out of paper, you'll have to put in a little more effort.

You will find them useful following materials and tools:

• telephone;
• 2 lenses (for example, from flashlights);
• pen;
• ruler;
• hot glue;
• Thick cardboard, you can take a box.

Making 3D glasses step by step

Now that everything is prepared, you can start making

1. Cut out all the components from cardboard, following the diagram below. Make a drawing using a pen and ruler, and then cut out what you get. If you miss somewhere and make a mistake, it’s okay - just glue everything together with hot glue.

2. In places where there are bends, bend the cardboard. Secure with glue.

3. Insert lenses into the front part where the eye slits are located. The holes you cut should be slightly smaller than the diameter of the lenses. But even if they hold well, secure them with glue just in case.

4. Download the cardboard application to your phone. It contains many different video games for 3D glasses.

5. Insert the cardboard with lenses into the structure. Turn on the application and select a game or video. Place your phone directly in front of the lenses and enjoy high-quality 3D images.

It really works, and if you try, you can make the glasses look cute appearance. Now you know how to make glasses out of paper with your own hands.

Try making them with children. They will surely enjoy watching cartoons in 3D, and you will also whet their interest in various science crafts.

You can experiment with the shape and color of glasses. And also make them more believable if you insert clear lenses into a paper frame. If you don’t have lenses at hand, use ones cut from plastic bottle forms.

Paper glasses are great for games because even if they break or get lost, you can always make another pair.

Learn how to make glasses out of paper and you can move on to more complex origami techniques.

Late in the evening you suddenly remember that you will need 3D or sunscreen tomorrow glasses. The shops are already closed, but at home there will probably be unnecessary things from which, if desired, you can build something suitable.

You will need

• A clear plastic CD case or any other piece of thin clear plastic
• thick paper or cardboard
• Universal glue
• Blue and red marker for 3D glasses or any dark one for sunglasses
• For design - water-based paint, gouache and varnish
• Ruler
• Tape measure
• Compass
• A saucepan with hot water
• Scissors
• A piece of gum

Instructions

1. Determine your frame size by measuring the width of your face along the eyebrow line. Draw a straight line on thin paper. Divide it in half and set aside the length of the jumper from the middle to one side and the other. Draw half of the frame the shape you want. Draw the second one in a mirror image. Cut out the pattern and fold it in half crosswise. Align the frame halves and trim them in the right places so that they are the same.
2. Mark a place for the glass. This can also be done first on one half, then cut and trace a hole on the other half of the frame. The glasses are ovals. Try to cut them out evenly, then you will get a pattern that can be transferred to plastic.
3. Take the disc box and break off the lid. This will be enough for glass. Draw the outlines of the glasses lenses on the plastic. To prevent them from being erased, they can be scratched with a thin needle. Just don’t forget that the glass should be a little larger than the pattern, because they will need to be glued.
4. Heat the water and put the lid on it for a few minutes. Use scissors to cut out the glass. Color them in the colors you need.
5. From dense paper make a frame. For strength, cut out four identical parts and glue them in pairs. If you wish, you can decorate the outer part of the frame. To do this, cover it with water-based emulsion and let it dry. Then paint with gouache and varnish.
6. Glue the glass. First stick them on the back half of the frame, then put them on the front half. The glass should be glued between the paper parts. Attach the elastic band.

Today’s topic is for jacks of all trades: how and from what products you can create good 3D glasses with your own hands for watching movies with the effect of 3D images. In our world, the 3D effect that is now in demand is called stereoscopy, and a three-dimensional image is, accordingly, a stereoscopic image. Yes, and we recently called glasses for viewing such images stereoglasses. It all depends on the method used to transfer the image. It can be divided into several types.

You can get a thrill from watching 3D feature films and cartoons using special high-quality glasses. They contain filters, with the help of which our eyes can see only one image, created by projecting two images onto each other. It is thanks to these actions that we get the 3D effect that we need.

Sometimes there are rare moments when there is absolutely no chance to buy new 3D glasses, but you really want to watch a new movie with a 3D effect. In this case, using some means you can make them yourself. At the end of our tips you can find a couple of simple master classes that will help you create 3D glasses with your own hands from simple and waste materials.

Let's look at it first main principle creating simple 3D glasses at home. So, to make homemade tride glasses you will need thin transparent plastic, for example, a transparent box from ordinary CDs or plastic from badges, two alcohol-based felt-tip pens, red and blue flowers. To create one pair of glasses The front cover for disks is quite enough.

Of course, homemade products will be very different from factory ones, but even they will give you the chance to enjoy watching a movie and three-dimensional 3D films. OK it's all over Now. Now you know, how to make 3d glasses on a computer with a pen.

A budget option

If you want to a budget option homemade glasses - make paper ones. In this case, it is worth taking a frame made of cardboard, because it is easier to glue the lenses to it. You will also need large transparent tape and transparent silicone film, three felt-tip pens red, blue and green flowers and sharp scissors.

Description of work:

Third option for creating glasses

This job is much harder than in the case of anaglyph. You will need hard transparent plastic and liquid colored in the desired color style. For plastic, you can take a case from a simple CD. You will need both of its particles, so we don’t throw anything away. The liquid for glasses will be distilled water or our glycerin.

First, let's cut out some parts from plastic: three vertical parts needed for assembling the lenses, the bottom and top part, and a jumper made of opaque material. You can see exactly how to cut out the parts in special diagrams.

Then we will make two holes in the upper horizontal part. They will be needed, when it’s time to fill the lenses with our solution.

Let's assemble the entire structure, gluing all the particles with quick glue. We make sure that the height of the lenses is the same everywhere, otherwise the liquid will begin to flow out.

After connecting the elements, we treat the joints with glue, which we combine with plastic shavings.

Glycerin is the best liquid for filling lenses. We take the glycerin solution into a syringe and pour it inside.

Then cover the holes with transparent tape. We create ear horns from pieces of plastic and glue them to the filter. Unfortunately, the full design does not fold, but it definitely helps you enjoy watching movies in 3D format, even on a computer.

Now you will know How to create 3D glasses at home.

It's hard to find a person who doesn't have a pair of glasses at home, at least dark ones. Many of them gather dust in drawers and are not worn by their owners due to the purchase of new models. Don’t rush to throw away your “old” friends, because even ordinary glasses can be decorated using the simplest and most inexpensive tools and materials. In this way, you can update a worn-out frame that has served you faithfully for several years, or (an option for the brave) make the glasses you just bought unique.

So, we present to you 10 ideas for decorating glasses!

Regular glasses + two-color polish

You will need:

Nail polish in two colors;
- narrow masking tape;

1. Use a strip of masking tape to separate the half of the glasses that will be painted a different color.

2. Apply varnish to one half of the first color. Leave for 20 minutes.

3. Remove a strip of masking tape and varnish the other half of the glasses.

Turning regular glasses into cat eyes

Or you can make glasses like JLo by gluing silver sparkling “ears”:

Beaded glasses

You will need:

Beads;
- glue.

Glasses decorated with beads

You will need:

Half beads (you can buy them in stores that sell everything for creativity);
- glue.

"Friday" glasses with sparkles

You will need:

Sequins (creativity stores will tell you what they are) and sparkles;
- glue;
- parchment for baking;
- pencil.

1. Draw the shape of the frame on baking paper. Apply glue generously and sprinkle with glitter. Leave it for a while.

2. Cut out a glitter frame from baking paper.

3. Glue the paper frame onto the regular one.

Happy Friday!

Glasses with buttons

You will need:
- glue;
- buttons.

Carefully glue the buttons different sizes on the frame.

Glasses decorated with flowers

You will need:

Glue;
- paper or fabric flowers.

Glue flowers into the corner of the frame, just don’t overdo it with the number of flowers. These glasses will be a great addition to a light summer dress.

Glamor glasses

You will need:

Glasses with removable lenses;
- lace;
- a thread of sequins;
- glue;
- golden ceramic paint (can be replaced with nail polish).

1. Cover the temples of the glasses with a thread of sequins. It is better to take glue that does not harden instantly. Otherwise, the slightest mistake can ruin your glasses.

2. We cut out a square of lace that will be slightly larger than the lens, so that there is fabric left for the hem.

3. We take the glass out of the frame and apply glue along its contour. Glue the lace, tucking it inward. We insert the glass into the frame and trim the lace from the inside.

4. Apply stripes and dots to the frame with gold paint.

Glasses with bright temples

You will need:

Self-adhesive or plain colored paper;
- glue (if the paper is regular);
- scissors.

Draw the frame of the glasses on paper and cut it out. Carefully place it on the temple of the glasses, trim if necessary, and glue.

Using this method, you can not only decorate your glasses, but also hide some frame defects.

Spiked glasses

These glasses look very cool, and the cost of making them is minimal.

You will need:

Glue;
- tips from ordinary ballpoint pens;
- rhinestones (optional).

Carefully glue the pen tips onto the frame. You can additionally decorate your glasses with rhinestones in the corners of the glasses.

But just recently people paid a lot of money for it! In those days when virtual reality glasses were on movie screens, only wealthy enthusiasts could afford them. You had to shell out several thousand dollars for a window into the virtual world - after all, the treasured device used miniature color displays with a resolution of at least 640 x 480 (and the corresponding pixel size) and amazing “gyroscopic” sensors.

Fashion is a capricious lady: virtual reality devices came off movie screens much faster than they managed to fall in price and become widespread. They were forgotten for a long time, and when they remembered again, it turned out that a good half of citizens carry both the display with dots that are indistinguishable even under a magnifying glass, and accelerometers with angular sensors every day. Just attach a case and a pair of lenses to any modern smartphone, and you’ll get VR glasses no worse than those worn by Johnny Mnemonic.

Secure fastening Galaxy Note phablet, comfortable fit on the head, specially selected optics with a precisely adjusted field of view and minimal distortion - a serious purchase for true lovers of 3D entertainment.

There are several ways to get your hands on the coveted case with lenses. You can purchase a serious (and expensive) device with a lot of adjustments, such as Samsung Gear VR You can order one of the cardboard kits for twenty bucks, the most famous of which is Google Cardboard. Or you can not wait for delivery, but make VR glasses with your own hands from available materials.

The sleek, Google-recommended design is cut and folded from a single, flat piece of cardboard. The only negative is that you will have to get lenses with a strictly defined focal length and diameter.

Size matters

The design of the glasses, which we came up with ourselves, has an advantage over Google Cardboard: the lenses in it can move relative to the screen, so you can adjust the glasses to the particular vision of a particular person.

We drew the details of our glasses directly on cardboard, in the free creativity, by eye, we wish the same for you: we really liked the result. In case you want to repeat our experience exactly, we took dimensions from the resulting parts and drew a drawing. Parts suitable for Samsung smartphone Galaxy S4 and lenses with a diameter of 3.5 cm with a focal length of 3.5 cm. When marking the bottom wall of the case according to your dimensions, do not forget to leave room for the nose. Be sure to provide a mechanism for attaching the smartphone (in our case, these are hooks and elastic bands).

The length of the body is determined by the characteristics of the glass: when equal diameter lenses, the longer the focal length, the longer the body will be, and vice versa. We came across two magnifying glasses in the store with a focal length of 3.5 cm and a diameter of 3.5 cm. If you find the same glasses, feel free to copy our scans.

If the lenses turn out to be different, adjust the length of the body to their characteristics. This is easy to do by eye: place your smartphone on the table, turn on the VR application and look at the screen through the lenses. You will see that the concept works great even without the case. After enjoying the spectacle, you will also get an idea of ​​the size of the future device.

The width and height of the case are determined by the smartphone model. The distance between the side walls is equal to the width of the screen, and the distance between the top and bottom plates corresponds to the width of the phone body. Our scans are designed with the Samsung Galaxy S4 in mind.

A piece of thick tape in the corner of the case performs an important function: it protects the power button of the smartphone from accidental pressing. The adjustment mechanism allows you to move the lenses between the screen and your eyes, adapting to the player’s vision.

To make the body, we chose thick millimeter cardboard. The design must be rigid enough to support the weight of the smartphone and maintain a specified distance between the screen and the lenses. The partition separating the images for the right and left eyes is made of thick paper. Lens brackets are also made of paper. Both cardboard and paper can be easily cut with a stationery knife along a ruler.

Welcome to the matrix

There are not many applications for “mobile virtual reality”, but a lot. You can find them by keyword Cardboard (cardboard) or by the abbreviation VR. Among them are attractions and games, concerts and films, 3D tours of cities around the world and educational journeys into the depths of the Universe. We have selected the most worthwhile apps with which to start getting acquainted with the world of virtual reality.
Roller Coaster Vr. There are dozens of applications with this name, because the “roller coaster” is a classic virtual reality attraction, a kind of “Tetris” of VR applications. You will find the most spectacular “slides” by the name of the developer FIBRUM. Rotate your head and direct your eyes as you wish, and you'll enjoy breathtaking views of the rolling jungle, breathtaking flights and speed against a lovingly rendered background. By the way, Russian company FIBRUM not only develops excellent software, but also produces a very advanced virtual reality headset for smartphones with 4.5-5.5-inch screens.
Zombie Shooter Vr. If you want to see your friend spinning wildly in the middle of the room shouting inarticulate curses, invite him to play this game. The undoubted advantage of the application (again from FIBRUM) is that it is a real 3D shooter, without requiring additional controllers (joysticks, gamepads or keyboards). The player moves the crosshair by rotating his head. When accurately aimed at an enemy, the shot occurs automatically. Thus, the game implements the principle “where I look, I shoot.” I would like to say a special thank you to the developers for not letting enemies get closer than a couple of meters to the player, otherwise you could end up with a heart attack: a virtual zombie in 3D looks much scarier than in the most advanced 2D toy.
Paul McCartney. An application from Jaunt Inc. is named after the great Sir Paul, which offers to be on the same stage as a participant The Beatles and see it literally at arm's length. Complete immersion in the atmosphere of the concert is facilitated not only by the three-dimensional image and excellent camera work, but also by surround sound. Unfortunately, the app is only available for devices with a screen size larger than five inches.
Orbulus. The most obvious advantage of virtual reality is the opportunity to visit the most interesting corners of the world without leaving your chair. The Orbulus application serves precisely this purpose, designed to transport the viewer to the most worthwhile places on our planet and even beyond. Walk on Mars, visit the Oxford Museum natural history, enjoy the northern lights and enjoy Hong Kong New Year's fireworks. The application implements an interesting mechanics of control using your gaze: to go to the desired place, you just need to look at it.

Underwater rocks

Building a cardboard box with lenses is not easy, but very simple. But still, there are some subtleties here too. The bottom of the body should be shorter than its top plate to allow room for the viewer's nose. The bevel cuts on lens mounts serve the same purpose.

It is highly recommended to paint the inside of the case black to avoid unrealistic screen reflections. On the outside, we left the glasses in their original cardboard form: we like their brutal, artisanal appearance.

At the front of the case, the top and bottom plates protrude slightly beyond the side walls. This is done so that the smartphone rests on the resulting protrusions. The plates have hooks: rubber bands are put on them to secure the phone. Securely mounting the device is very important, since most VR applications require active head rotation.

The buttons on the side edges of the smartphone, being sandwiched between the panels of the VR glasses body, can present a surprise. To prevent them from being pressed spontaneously, it is worth providing cutouts for them or, conversely, supports.

The inner surface of the glasses case should be painted black. A little more than half of the screen falls into the field of view of each eye. It creates the feeling of watching in a movie theater, when in addition to the screen you can see the side walls, floor and ceiling. Black ink prevents unnecessary reflections and glare, helping you focus on the screen.

AND last tip: When inviting someone to try out your new VR glasses, have a second smartphone or camera ready in advance. You'll probably want to videotape the tester. The deliberately “cardboard” design of VR glasses is deceptive: homemade device creates unexpectedly strong effect immersion in the virtual world, causing a storm of emotions among viewers.