How to paint laminated interior doors. Is it possible to paint interior doors made of MDF coated with PVC film? Design rules for combining floor and door colors

home

Signaling

Today, laminated coating is considered one of the most durable finishing materials. It is successfully used for arranging floors, for making furniture and interior doors. Repeating natural wood in both color and pattern, laminate has an attractive appearance, successfully imitating parquet or wood products.

Interior doors made using lamination combine long service life, stylish appearance, and good heat and sound insulation characteristics. But even durable laminated coating, constantly used for many years, can lose its attractiveness. In order to give it new life, restoration is necessary, which can often involve painting.

Features of coating restoration using paint

During operation, laminated doors become covered with scratches and abrasions, which are especially noticeable in the area of the door handle. Sometimes getting rid of these mechanical damages is very difficult. Due to its structure, the laminated coating is almost not amenable to any kind of processing.

Thus, it is impossible to use varnishes or stains, which are extremely popular when processing, for the restoration of heavily damaged doors. natural wood. This is explained by the fact that before processing with these materials it will be necessary to restore the smoothness of the doors using putty materials, and they will be visible under the varnish layer.

Of all paint and varnish materials Only paint can give laminate flooring its former attractive appearance. But painting it yourself is not as easy as it seems at first glance. The main difficulty is the complete lack of adhesion, that is, adhesion, between the coating and the coloring matter.

The smooth laminated surface of the door does not hold enamel very well, which is usually used for painting wood products. The paint may peel off within a month, causing the doors to look even worse than before treatment. To understand the principle of painting a laminated coating, it is necessary to consider what its structure is.

Modern laminate is a material consisting of several layers:

The top layer is protective covering, which is responsible for the resistance of the board to various types of mechanical damage. As a rule, it is made from paper impregnated with a special solution of corundum and melamine resins.
Decorative coating. It consists of paper that has been embossed and dyed to create a wood grain texture.
The base is made of plastic or fiberboard. The base is quite dense and the thickest of all layers of laminated boards.
Under the base there is a substrate (bottom layer), which is responsible for waterproofing the laminate. This layer is very difficult to destroy; it usually remains intact even under the most severe impacts.

By considering the composition of the material from which laminated doors are made, you can understand which technology will be most suitable for painting. Firstly, you need to treat the protective layer in a special way, giving it good adhesion. Secondly, it is necessary to smooth out scratches and abrasions on the surface by filling them to a depth of no more than 2 layers. After this, you can paint with enamel.

Painting algorithm

To paint a laminated door you will need following materials and tools:

rags or rags;
sandpaper with grains of different fractions;
putty knife;
wood putty;
White Spirit;
enamel PF 115 or PF 226;
brush for painting.

First of all, you need to prepare the surface to be treated. To do this, the doors are thoroughly washed to remove any possible contamination and dried. After this, all abrasions and scratches should be removed using coarse sandpaper or a sander. All dust is carefully removed with a clean cloth.

The next stage is applying putty. The mixture is applied in 1 or several layers so as to form a single whole with the door solid. When applying several layers, you must wait until the previous layer has completely dried. After the putty composition has dried, it is necessary to level the treated surface using medium-grain sandpaper.

Then the door is wiped again with a clean rag and matted with fine-grain sandpaper. The main task here is to make the surface matte and slightly rough, which will significantly increase the adhesion of the protective layer to the dye.

When the door has acquired a matte finish that is uniform over the entire surface area, it must be wiped with a soft cotton cloth soaked in white spirit. After this you can paint. Since the enamel will be applied in several layers, it must be diluted with white spirit until liquid state and mix very thoroughly.

The work must be done not with a roller, but paint brush, which will allow you to better paint the entire surface of the door. The paint must not only be applied, but also smeared thoroughly. After applying the painting material, the laminated door must be left until the paint dries completely. Then 1 or more layers of the substance are applied.

When the paint is completely dry, the door is ready. To make her more attractive appearance You can use varnish, which is applied with a brush or spray gun. If necessary, several layers of varnish can be used. Each subsequent layer must be applied 24 hours after applying the previous one. The varnish coating will give the door strength and aesthetics, making it more durable.

Restoration of laminated doors that do not have serious defects

If a door with a laminated coating has scuffs, but there are no scratches or other serious defects on it, you can use more simple ways restoration.

So, a small stain on the doors can be covered with a marker of the same color as the surface. You can also use stain.

In order to treat the door with stain, you will need to prepare:

grinding machine;
“zero” sandpaper;
soft cloth;
solvent;
stain;
paint roller or spray gun.

The main task during the work is to remove the top protective layer of the laminated board. This must be done extremely carefully so as not to damage the base. When the protective layer is removed using grinder, the base is carefully processed sandpaper, and then wipe with a soft cloth soaked in solvent.

When the solvent dries, the surface needs to be treated with stain. To do this, you can use a roller or pour the solution into a spray gun. Stain, like paint, should be applied in several layers. 12 hours after the solution has dried, you can varnish the doors.

If the interior doors in a room have become old and have lost their former beauty, do not rush to throw them away. To update your interior, try painting or staining your laminated doors. This method will save you money family budget and use the doors for their intended purpose for a long time.

The interior doors are laminated and stains cannot be removed (the paint is erased from the film). Can they be painted? And with what?

Paint a laminated door Can.

High-quality water-based paint paints the door quite well.

You still have to prepare the door.

I would recommend making the door surface matte and rough.

Then, using a special high-quality primer, prime the surface of the doors, and then paint with water-based emulsion. Don't spare money on quality paint if you want to achieve the desired result.

it is possible, but not advisable since few people succeed in achieving a good result. This is a complex process.

But nothing is impossible, if you are determined to paint the door, then first before painting it would be good to prime the door tightly and well, and then no problems will arise when painting the door.

Of course, a laminated door can be painted. The main thing is to choose the right paint and produce preparatory work. It is more convenient to paint the door in a horizontal position; to do this, remove it from its hinges and place it on a workbench or table covered with film.

Clean the surface on both sides with sandpaper until it becomes rough and matte, and prime. When the primer has dried, if there are defects on the door: chips, cracks, carefully putty, after drying, sand with fine sandpaper and apply primer again.

To paint the door, paint that is easy to care for is suitable: acrylic, oil, acrylate or nitro paint. Mix the selected paint thoroughly and apply to the surface using a brush or roller. It is better to paint in two layers, when it is completely dry, you can paint the door on the other side.

You can still try to remove stains, because the film is not reactive to some solvents - for example, white spirit, it should remove stains, but if you still need to paint, then do so!

Buy acrylic paint, after removing debris and dust you can paint without any preparation, acrylic paints are based on a solvent, it will melt the film and the paint will adhere well.

In principle, you can use regular PF enamel or oil paint or even water-based emulsion, but the door will need to be prepared by either being completely sanded and the film torn off, or unwound, primed with a special acrylic-based primer, and then painted.

Doors are a large canvas - therefore, of course, it is advisable to carry out the work with a spray gun, you will save time, material, and the result will compare favorably with a brush or roller.

Of course, with appropriate treatment, you can paint the door. But I would recommend that you use self-adhesive film. Since your surface is already covered with a film, that is, on a laminated base, it will be easier to stick the adhesive film to it yourself. To do this, you just need to select the desired color and pattern, then degrease the surface and carefully stick the film on. To paste a film without air bubbles, you can use a method of applying an aqueous solution with detergent or soap.

It is possible if you first sand it with sandpaper.

How to paint a laminated door: features and processing algorithm

A smooth surface will not work for painting. And then you can use paint at your discretion. Of course, not water-based, but you can choose any wood paint. This is how we painted it with acrylic.

Another option is to use wood-look self-adhesive paper.

Combination of colors and wood textures in interior design

Before choosing a laminate for your doors, you need to know some of the features of combining wood colors in interior design. You can choose a door color that is contrastingly different from the color of the laminate, but still respect the color combinations.

Doors, floor color and furniture should be the same color - warm or cold.

It is important to observe the color combination of the laminate and doors, as well as choose the right color for the baseboard.

If the door light shades, and the floor is chosen in a contrasting dark version, then the baseboard is chosen to match the color of the door. For doors in dark colors, the plinth can be chosen to match both the color of the floor and the color of the door.

Neutral range

Neutral color for flooring and door decor

If it is difficult to decide how to choose a laminate for your doors, then you should opt for a warm pastel beige or golden laminate color.

These colors include the following types of wood:

This decor can be combined with any design of the walls and ceiling of the room.

Advice. It is important that the wood does not have a red tint.
Because this color will be quite difficult to combine harmoniously with various shades of walls and ceilings.
Before choosing doors for red laminate, the designer must be sure that the decor of the room will be for a long time It is maintained in the same color scheme and the furniture in the room will not change.
Doors of dark wood do not go well with the red shade of the floor.

Demanding yellow-red palette

Interior decoration in sunny red colors

The red shade of wood chosen for the decor of laminate and door leaves does not go well with cold blues, blues, as well as with calm colors of all shades of light pink, purple and lilac.

The combination of laminate and red doors can be harmoniously combined with the warm and gentle colors of early autumn:

Cold palette

If you decide to use cool wood colors in the interior design, such as:

Bleached oak of various textures and shades;

Various colors of bleached oak

All shades gray;

Milky white and light cream colors for floors and doors.

In this case, you need to be extremely careful when choosing the color of the walls and ceiling of the room. These colors are most often used for decor in a minimalist, classic or vintage style. It is better to choose the same door color and laminate color.

Gray color in interior design

This fact may surprise you, but the universal gray color is very demanding in terms of combinations and combinations of stylistic solutions. Gray shades of floors and doors are best used in the design of rooms in a classic style.

If the question arises about how to choose a laminate for gray doors, then you should opt for a floor covering (see how to choose a laminate) that is several shades darker than the color of the door of the same texture.

White color

Interior decor option with white laminate and doors in neutral colors

When deciding how to choose the right laminate for white doors, it is advisable not to get too carried away with the game of contrasts. Though White color universal, but it can play a cruel joke on the designer.

If color window frames And decorative elements white, then you should choose only white doors. And combine them with laminate flooring in light, warm shades.

A white door looks vulgar in combination with a floor made of dark wood - stained oak, wenge. Knowing how to choose laminate flooring and white doors, you can create a spectacular and unforgettable interior of any room.

Dark wood colors

Color of doors and flooring in one design

If you decide to decorate the floor with laminate made of dark wood, such as:

Dark stained oak;
Dark chestnut;
Brown wenge.

It is better to choose the design of the doors in this color scheme. Dark colors in floor design do not like contrasting solutions in the decoration of windows and doorways.

How to choose the right laminate for doors painted in dark wenge?

Fashionable shades of Wenge this year

It is important to immediately decide on the wenge color that appeals to you. And build on this general design premises.

Price for natural Construction Materials from wenge is very high. But there are many high-quality floor coverings and doors with imitation of this valuable type of wood (see Wenge doors in the interior with laminate).

It is not advisable to combine several shades of wenge in the design of floors and doorways. It is better to choose one color palette.

Important.
Black wenge is used only in interior design in modern style, since it should be emphasized modern furniture with abundance metal parts decor.
In a classic design style, this color is inappropriate, as it suggests a cold palette in interior design.
As you can see in the photo, this color is ideal for interior decoration in a modern or high-tech style.

Several colors in the laminate pattern

You can also combine laminate different shades with white doors and windows

If a laminate that combines several shades and colors is chosen for interior decor:

Then the color of the front door must match at least one color used in the decor of the laminate. It is best to pre-order a 3D or decor design project to decide which option design will suit for a particular room.

Design rules for combining floor and door colors

Of course, you can, as required by the operating instructions, choose doors and laminate of the same color and shade (see what color to choose laminate). But sometimes interior design requires more daring and original solutions.

But there are several rules in interior design that should be followed, even if you decide to do the renovation yourself, without involving expensive designers.

Doors and floors of light shades that are the same color and texture are chosen for small rooms facing north or west;
The contrast between the door and the floor looks great in large spaces. But the combination of laminate and contrasting doors requires attention to the choice of baseboard.
Is it possible to paint a laminated door?

The baseboard should match the color of the lighter door.
The colors of the laminate and doors should be either warm or cool.

The contrasting color combination of the laminate and doors should be pronounced. If this is not done, the design will be blurry and inexpressive.

The main rule of harmony in the design of premises should be adherence to the same style in the design of furniture, floors, window and door openings. And the choice of color and texture of the material and the decision on how to choose a design option depend only on the preferences and artistic tastes of the owner of the house.

How to paint a laminated interior door so that it becomes new and lasts a long time

Nowadays, laminated coatings are used more and more often. They are used to decorate furniture, interior and entrance doors, as well as other interior elements. In appearance, laminate resembles wood, which is why parts of it are used in construction and decoration. This coating is considered durable, but still due to mechanical influences laminated doors can get defects and become unusable. To give such door defects attractiveness and invigorate them with color, technological painting is used. Next, we'll look at how to paint a laminated door to make it last as long as possible.

Restoring a laminated door using paint

Over time, laminated doors become stained around door handles and scratches on the surface. It is quite difficult to remove such flaws, since the coating is not particularly amenable to this. Therefore the most effective remedy To correct the damage is to paint the doors.

Let us immediately note that treatment with stain and varnish will not be suitable, since for this process it will be necessary to sand the door and fill in all the irregularities with putty, and under transparent coatings all these errors will be visible.

Therefore, only an opaque coating or paint is suitable for painting laminated doors. But the work is not at all easy to do. Especially because the paint will not be able to adhere to the laminated surface and will flow off it. Therefore, you need to know the technology of how to paint a laminated door so that the paint on it lasts as long as possible.

Materials and tools for painting

Special enamel for painting.

Brush and roller.

Solvent.

Wood putty.

Putty knife.

Sandpaper.

Napkins and rags.

The surface of the door should be prepared for painting. The doors are washed, wiped and dried. All scratches, as well as door leaf rubbed with sandpaper or a grinding machine. After this, dust is removed from the surface with a brush and rags.

Then putty is applied to the door leaf. It should lie in a thin layer so as to become one with the door. After the first layer has dried and sanded, a second one is applied, which is also rubbed down after drying.

When did I purchase the door? the desired structure, it is cleaned of dust and wiped with a solvent. Now the surface is completely ready for painting. Next, we’ll look at how to paint a laminated door correctly.

Painting a laminated door

The paint will need to be thinned as the door will need to be covered with three thin coats of paint.

Is it possible to paint a laminated door?

The material for painting should be one that is diluted with white spirit.

You should paint with a brush, this will allow you to better apply the coating to the surface of the door. The paint is not simply applied to the surface, but thoroughly rubbed into the door leaf.

After applying the paint, the door must dry completely. Only after this the second and then the third layer is applied. Each of them, after applying the next one, must be dry.

Now the finished door is varnished to give it shine and attractiveness. The varnish can be applied either with a brush or with a spray gun.

Painting a laminated door with stain

How to paint a laminated door if there are no major defects on it, but the color of the coating is a little faded and worn off.

Carefully remove with a sanding machine. upper layer coverings. Then the surface is rubbed with sandpaper and cleaned of chips and dust.

The door leaf is wiped with a solvent, and after it dries, it is treated with stain of the appropriate tone.

The stain should be diluted according to the instructions.

Apply the mixture to the door with a roller, brush or using a spray gun.

The technology of work is the same as with paint. It is necessary to coat the door leaf in three approaches, but not earlier than 12 hours after applying the previous layer.

After the final painting with stain and the surface of the doors has completely dried, they should be opened with varnish.

How to paint a chipboard door

Chipboard is one of the well-known materials that is used to make furniture, doors and other products. What does this material consist of? These are wood chips that are held together by formaldehyde resin. Wood chips under the influence of moisture and other unfavorable conditions can deteriorate and come apart. You can protect them by treating the surface with varnish or paint. In addition to the fact that coloring materials serve as protection, painting also gives decorative effect, because not only multi-colored surfaces are created, but also a variety of textures. So the question arises, how to paint a chipboard door to give it a beautiful look? To do this, you just need to cover the door with a new layer of paint. It is important to know what material the chipboard was originally covered with or whether the door is new and there is no coating at all.

Before painting chipboard, you should carefully prepare the surface. The final painting result depends on this work. To renew chipboard doors, transparent varnish or paint is most often used, which is applied to the surface. But this is not practical, since the paint begins to crack after a while. Removing this layer of paint later is not so easy and takes a lot of time. But this can still be done in several ways.

The surface of the door can be treated chemical composition. You need to choose it depending on how the door was treated.

The surface can also be exposed to hot air, which can be supplied from construction hair dryer. Coming out, fairly hot air affects the old coating, destroying it. But then you can easily remove it with a spatula. But it is important to maintain a certain temperature so that the surface of the door does not deteriorate.

Then the surface needs to be cleaned of accumulated dust and degreased. Using a grout mesh (preferably coarse), clean the base of the door so as to leave small burrs. This is necessary in order to create better adhesion to the base. Apply a special primer. The primer is applied so that the glue that holds the wood chips together does not allow toxic substances to evaporate and moisture cannot penetrate inside.

Before painting a chipboard door, it should be puttied and sanded to remove any unevenness and differences that may have formed. Before puttying, a primer must be applied to the surface. For doors made of Chipboard is better use acrylic primers. They tend to protect the base from cracks. The putty must be applied with a construction spatula, spreading it evenly over the entire door.

After the putty layer has dried, it is carefully sanded with fine-grained sandpaper. This procedure is carried out until all the irregularities are corrected. After this, the dust must be removed and painting can begin.

A good solution for painting chipboard would be a spray bottle or a special can filled with paint. With such tools it is easier to create a uniform layer without smudges.

What types of paint are suitable for this material?

Before choosing paint, you need to consider one thing: different types paints give different coloring results. To increase the surface's resistance to mechanical stress, the base should be coated with varnish.

Doors painted with acrylic paints will last for many years. They are not afraid of temperature changes and collecting steam, condensation and splashes of water. Surfaces painted with acrylic paints can withstand about 5,000 washes.

How to paint a laminated door with your own hands?

But the smell from such a helmet takes a long time to dissipate, which means it is better to carry out the work on the balcony or in the garage.

Before you paint a chipboard door, you need to know the painting technology.

The paint is applied in several layers. You can paint either with a brush or with a roller that has short pile. A roller with a long pile can leave a pattern that looks like orange peel. If, after applying the paint, unevenness is still visible, you should again use sandpaper to sand it and apply another layer of paint. If you achieve the expected result using this method, you can proceed to the final stage - applying transparent varnish. It can also be applied in several layers.

The choice of paint quality and color is a matter of taste, but it is important that painted chipboard doors are in harmony with the interior.

Reviews from site visitors:

I'll tell you about my own experience in painting chipboard And film facades in furniture production.

Painting chipboard

Chipboard was painted, but rarely when the project indicated that, for example, the outer side wall of the kitchen or the details of the portal had to be the same as the painted or patinated facades.

In this case, the surface of the chipboard was sanded with paper of P220 grit or coarser in order to break the top protective layer of the laminate on the chipboard to a matte surface. Next, paint was applied, but more often they worked according to the scheme - sanding, one layer of primer, sanding, finishing. No adhesives were used.

Problems arose if the edge was poorly glued and after finishing the paint fell into places where the edge did not fit well, worse if it peeled off, but again this was due to bad work pasting equipment, violations of pasting technology.

Painting facades covered with PVC film

We had to resort to the technology of painting film facades in order to simplify the technology of painting facades with complex internal milling.

What were the difficulties: the main ones were the labor intensity of grinding complex milled profiles and the risks of damaging the profile itself, which already required alteration of the facades.

In addition, it was necessary to apply sealing primer, sand it, apply base primer, sand, apply primer again, and sand again. In the case of film, the surface and profile of the MDF facade in PVC film were simply pre-grinded and finishing layers were applied.

It turns out that the technology was reduced to a minimum, well, sometimes they could apply primer to the film before painting, but sanding the primer in this case was much easier than sanding unlined MDF.

Important point Another thing in all this is how well the film is glued to the MDF facades. If the film peels off from the edge, if there are inclusions under the film, glue sagging, poor-quality milling, poor preparation of the facade surface before pressing, then we will get not the advantages, but the disadvantages of this technology.

Therefore, the technology of pressing facades into membrane vacuum press must be at a high level.

In addition, the film itself must be selected for the facades.

Firstly, it should be white, and secondly, it will be better if it is intended just for painting, that is, without a protective top coating.

Film suppliers called this film primer. In principle, you can use just white film, but you need to test it and test it for adhesion.

03.09.2016 112157

Interestingly, no adhesive primers were applied to the film facades; it was enough to matt the film by sanding. But, in any case, experiments are always needed, and then widespread use of the technology, otherwise primer may be needed to improve the adhesion of paint to film or chipboard. For such primers, contact your suppliers, they will help you select the necessary paints and varnishes. Every theater begins with a hanger, and the interior of any room begins with a door, which sets the mood and makes a significant contribution to the atmosphere of the interior and is

room zoning. Collapse Many people underestimate the need for updating, focusing on the choice of wallpaper, flooring and furniture. As a result, an unpleasant contrast is created between a room that looks brand new and one that has lost its appearance. old door. But this can be avoided if you paint it yourself. Given that correct selection paint and adherence to dyeing technology, the result will be excellent, which will allow you to create a holistic

harmonious interior

and save significant money at the same time.

Which paint to choose?;
There is such paint for interior doors:
alkyd enamels

acrylic enamels; nitro paint. Alkyd enamels are inexpensive, but they create a stable, smooth, durable coating on the surface. However, such paints have one significant drawback: when painted,
bad smell , which will disappear only after the enamel layer has dried, and this takes a couple of days. Therefore, alkyd enamels are used only for well-ventilated areas or if there are no small children or people with allergies in the apartment. The ideal choice for painting would be
Nitro paint creates a great, even finish and dries within minutes, but it also releases toxic substances into the air. Therefore, when using it, children, pregnant women and allergy sufferers are removed from the room where the painted interiors are located.
In addition, such paint is not suitable for painting a veneered door, since under its influence the veneer becomes covered with stains that are difficult to remove.
As for the shade of paint, you should choose it depending on color scheme interior and your own taste preferences. You can choose the color of interior doors in accordance with the shade of wallpaper, individual elements of room decor or flooring. A neutral and discreet option would be white. Light beige, brown of various shades, wood-like color are considered classics. Extravagant colors - red, green, blue and other sharp tones create an effect of tension and visually disturb the peace of the home.

Selection of paint depending on the material

When choosing paint, you should consider what material the door is made of.
Painting wooden canvas or from chipboard can be done using any paint.
If the door is made of, painting it is somewhat more difficult, since it is difficult to maintain the structure of the veneer. Therefore, it is advisable to use a varnish of a suitable shade or paint with paints that contain varnish, although ordinary acrylic water-based paint is also suitable.
It's easy to renew a laminated surface. It creates excellent adhesion to any coloring composition.

Preparing for coloring

Before starting staining, remove. In the event that you only need to slightly update the paint layer, this is not necessary.
Painting doors in an apartment begins with preparing the workplace. The door removed from its hinges is laid horizontally on suitable supports at a height of at least 50 cm from the floor. Ordinary stools are successfully used as supports, on which boards the width of the door leaf are placed. The supports must be covered with a non-slip, lint-free, thick fabric. The door is processed first on one side, then turned over to the other.
The first stage of work is removing the layer old paint. For convenience, all fittings (handles, hinges, etc.) are first removed, and a small amount of cotton wool or rags is placed in the holes.
To remove a layer of old paint, use a solvent, hard wire brush or sandpaper.

After removing the paint, level the surface of the interior door, fill the cracks with putty, and polish the surface grinder or fine-grained sandpaper and apply a layer of primer. The primer is prepared from the same paint that will later be used to paint the main background. To prepare it, the finished paint is diluted with a solvent in a ratio of 1:3. The resulting composition is used to prime the canvas in 1 layer. If necessary, after priming, it is putty again, partially or completely.
All of the above applies to interior doors made of wood. When preparing to paint doors made from other materials, there are some important points to keep in mind:

It is enough to remove the top layer of varnish from a veneer door. If you only need to slightly update the gloss, then the paint is applied over the previous coating;
Only the top layer of waxy dirt-repellent impregnation is removed from the laminate canvas;
doors made of MDF and chipboard are prepared for painting in the same way as wooden doors.

Painting

When the remnants of the old paint have been removed from the door and its surface is prepared for applying new paint, begin painting.
To paint wooden door in an apartment, it is most convenient to use a roller, and to work on small details and protrusions - a small brush. It is convenient to use a special spray gun to apply paint. This is especially true in the case of painting a door made of MDF.
Before applying the paint, it is recommended to carefully filter it: this will make the coating more dense and uniform.

Important! The door leaf is painted only in one direction! You cannot put layers of paint towards each other. During work, avoid direct sunlight on the door leaf. The room must be protected from dust and midges, which, sticking to fresh paint, will ruin the job.

If you want to varnish the surface, be sure to wait until the paint layer has completely dried. This process takes a day for acrylic paints and two to three days for alkyd enamels.

Coloring ideas

You can limit yourself to a color that matches the interior of the room, but why not show your imagination and turn the interior door into an interesting interior detail?
To give the door a more decorative look, it is recommended to use several techniques:

using a stencil. In this case, the door is covered with a background layer of paint, after which, after drying, an even, neat pattern is applied using a stencil,
use of several colors. In this case, you can create interesting patterns in the form of stripes, squares or rectangles. To create an even drawing, you will need a special masking tape, with the help of which areas of the required shape are highlighted on the dried layer of background paint.
artistic painting. Such option will do only for those who have certain drawing skills. To create the painting, artistic acrylic paints and thin synthetic brushes are used. At the same time, fairy-tale scenes are suitable for the door to the nursery, and floral ornaments are suitable for the bedroom or living room,
creating a textured surface. To add interest to doors decorative look It is recommended to use a special hard roller or brush, which is used to work through the layer of recently applied paint. In addition, special paints are sold that, after drying, create a textured surface.

With diligence, you will receive a real work of art.

As you can see, painting interior doors with your own hands is not that difficult. To achieve an excellent result, you need to be patient, take your time while working and use high-quality materials.

Nowadays, laminated coatings are used more and more often. They are used to decorate furniture, interior and entrance doors, as well as other interior elements. In appearance, laminate resembles wood, which is why parts of it are used in construction and decoration. This coating is considered durable, but still, due to mechanical stress, laminated doors can receive flaws and become unusable. To make such door defects attractive and invigorate them with color, technological painting is used. Next, we'll look at how to paint a laminated door to make it last as long as possible.

Restoring a laminated door using paint

Over time, laminated doors become covered with stains around the door handles and scratches on the surface. It is quite difficult to remove such flaws, since the coating is not particularly amenable to this. Therefore, the most effective remedy for repairing damage is painting the doors.

Materials and tools for painting

Special enamel for painting.

Brush and roller.

Solvent.

Wood putty.

Putty knife.

Sandpaper.

Napkins and rags.

The surface of the door should be prepared for painting. The doors are washed, wiped and dried. All scratches, as well as the door leaf, are rubbed with sandpaper or a grinding machine. After this, dust is removed from the surface with a brush and rags.

When the door has acquired the desired structure, it is cleaned of dust and wiped with a solvent. Now the surface is completely ready for painting. Next, we’ll look at how to paint a laminated door correctly.

Painting a laminated door

The paint will need to be thinned as the door will need to be covered with three thin coats of paint. The material for painting should be one that is diluted with white spirit.

You should paint with a brush, this will allow you to better apply the coating to the surface of the door. The paint is not simply applied to the surface, but thoroughly rubbed into the door leaf.

After applying the paint, the door must dry completely. Only after this the second and then the third layer is applied. Each of them, after applying the next one, must be dry.

Now the finished door is varnished to give it shine and attractiveness. The varnish can be applied either with a brush or with a spray gun.

Painting a laminated door with stain

How to paint a laminated door if there are no major defects on it, but the color of the coating is a little faded and worn off.

Using a sanding machine, carefully remove the top layer of coating. Then the surface is rubbed with sandpaper and cleaned of chips and dust.

The door leaf is wiped with a solvent, and after it dries, it is treated with stain of the appropriate tone.

The stain should be diluted according to the instructions.

Apply the mixture to the door with a roller, brush or using a spray gun.

The technology of work is the same as with paint. It is necessary to coat the door leaf in three approaches, but not earlier than 12 hours after applying the previous layer.

After the final painting with stain and the surface of the doors has completely dried, they should be opened with varnish.

Sections

How to paint laminated interior doors. Is it possible to paint interior doors made of MDF coated with PVC film? Design rules for combining floor and door colors

Features of coating restoration using paint

Painting algorithm

Restoration of laminated doors that do not have serious defects

How to paint a laminated door: features and processing algorithm

More questions on your topic:

Combination of colors and wood textures in interior design

Neutral range

Demanding yellow-red palette

Cold palette

White color

Dark wood colors

Several colors in the laminate pattern

Design rules for combining floor and door colors

Is it possible to paint a laminated door?

How to paint a laminated interior door so that it becomes new and lasts a long time

Is it possible to paint a laminated door?

How to paint a chipboard door

How to paint a laminated door with your own hands?

Reviews from site visitors:

Painting chipboard

Painting facades covered with PVC film

harmonious interior

Selection of paint depending on the material

Preparing for coloring

Painting

Coloring ideas