Do-it-yourself automatic piggy bank for paper money. How to make a piggy bank with your own hands from different materials How to make a piggy bank for good deeds with your own hands

home

Signaling

Have a nice day, Gentlemen! Each of us has or had our own piggy bank in which we put money towards our dreams. Some people have purchased piggy banks in the shape of an animal, others have a regular bank, but I made myself an automatic “bill-eating” piggy bank. Making this homemade product will not amount to a lot of work, and will not take up much of your precious time.

Testing and production can be seen in the video:

I will tell you what materials we will need in the article itself.

Step 1: Let's start by making the mechanism itself that accepts banknotes. Take 4 caps from plastic bottles. In each of them you need to make a hole exactly in the center. The hole is 3-4 mm in diameter. as the diameter of the skewer. Next, we cut off the two pieces we need from a wooden skewer and glue the lids on them, as shown in the photo.

Step 2: Cut out 2 rectangles from cardboard. And we wrap them on the lids, fixing the whole thing with glue. Next, we wrap electrical tape onto the resulting rollers and put on 4 elastic bands.

Step 3: Cut out 4 rectangles from thick cardboard, from which we will make bases for the rollers. Then we assemble the box with rollers.

Step 4: Take two more lids and use hot glue to make the sides. They are needed to ensure that the rubber does not fly out of place during operation. Next, we cut off a piece 1.5-2 cm long from the gel pen. We install the lids and the shaft from the pen on skewers, and fix the whole thing with glue.

Step 5: Next, put on an 8-point elastic band. You don’t have to wear it; bills without a working second roller will be accepted anyway. We make a stand for the motor from cardboard and glue it in place.

Step 6: Cut out 6 pieces from plywood, dimensions are in the photo, plywood thickness is 9 mm. I made a hole for the banknotes with a chisel and then worked it with a file. Next, use glue to assemble the cube, but do not glue the bottom.

Step 6: Glue small blocks at the bottom corners. We will screw screws into them that will hold the bottom of the piggy bank. With help grinder We clean all edges and surfaces of the piggy bank from splinters.

Step 7: Next, solder the wires to the motor. The circuit is very simple: battery, on/off button, and motor. The main thing is to maintain the polarity so that the bill is sucked in and not spit out. Next we install this design in its place, insert the button, and secure the battery. Cover the battery with cardboard, just in case.

Step 8: Check functionality. I’m just not happy with a plywood piggy bank, so I’ll burn $ and the inscription (MoneyBox - piggy bank) on it. I will burn with a regular old soldering iron, periodically letting it cool so that it does not overheat.

How to make a piggy bank from paper, cardboard, bottles, Legos, jars, boxes, plaster, wood with your own hands. How to make a piggy bank at home - step by step instructions

Tell

A piggy bank is a place where you save money. Perhaps you dream of some expensive thing or just want to have a “stash”. You can buy a piggy bank in a store, or you can make it yourself using a minimum of materials, which is much more economical. If you want to teach your child how to save money, then involve him in making a piggy bank. This can be a great family activity. So, what should a piggy bank be like? It can be made from a variety of different, and sometimes unexpected, materials. The piggy bank should not be opened so that you are not tempted to take some of the money out of it prematurely. In this article we will look at many ideas for creating a piggy bank at home.

The list of materials from which you can make a home piggy bank could take a very long time. Absolutely any container where you can put coins or paper bills. The most common choice for making a homemade piggy bank is following materials:

shoe box;
glass jar;
can;
cardboard box;
plastic bottle;
toy;
wooden box or casket.

To decorate a money box, you can use clippings from newspapers or magazines, satin ribbons, lace, fabric of various textures, colored paper, old wallpaper, beads, buttons, rhinestones, sequins, etc.

How to make a piggy bank at home

So, you decided to make a piggy bank with your own hands. In order for the result to please you, the work on creating a piggy bank must be clearly structured and planned. Follow the following work plan:

The first thing you need to do is decide on the style of your future piggy bank. If the piggy bank will be a gift for someone, then take into account the age of this person, his field of activity, his interests and hobbies. Think about what technique the piggy bank will be made in. At this stage, it is advisable to make a small sketch on paper, a sketch;
If you have decided on the style of the piggy bank, then you need to start selecting materials and necessary tools. Find and prepare in advance what will serve as the basis of the piggy bank. If you use a plastic bottle, clean it thoroughly and degrease the surfaces. Prepare all the materials for decorating the piggy bank. You should also have scissors, a hammer, a stapler, a hole punch on hand - all the tools that you will need;
The last stage is the process of making a money box itself. For convenience, you can use various instructions or video tutorials on how to create a piggy bank that you can find on the Internet.

How to make a piggy bank with your own hands - step-by-step instructions

How to make a piggy bank out of paper

The fastest and easiest way to make a piggy bank is to make it out of paper. In addition, this option is also very budget-friendly, since creating such a piggy bank does not require a lot of materials. You will need: thick paper of the color you want, hole punch, decorative thread or ribbon, glue or double-sided tape, printed template.

A paper piggy bank will be presented in the form of a small box with a slot at the top. First, print out a template that will help you make a perfectly even box.

If you printed the template on white paper, then transfer the design to colored paper, which should be a little thicker.
Using a hole punch, make holes on the two most protruding parts of the template. These holes will be useful for later threading decorative thread or ribbon through them.
Follow the instructions on the template to make a box. Depending on what is more convenient for you, use PVA glue or double-sided tape.

You should end up with a triangular-shaped box like this.

Now we can start decorating our paper piggy bank. Pull a beautiful ribbon or thick thread into one hole, wrap the entire box around and pull it through the second hole. Tie a ribbon or thread into a bow.

Now I'm missing myself main part, without which the piggy bank will not be a piggy bank - a slot for throwing coins. Make it at the top of the box with a sharp utility knife. The cute money box is ready. As soon as you have collected the amount you need, simply tear up the piggy bank. Now you know how to make a paper piggy bank.

How to make a piggy bank from cardboard

A very impressive piggy bank for coins can be made from thick cardboard, which is usually used to make boxes for shoes, equipment, etc. To create such a piggy bank at home, you will need the following materials and tools:

sheet of thick cardboard,
stationery knife,
simple pencil,
scissors,
ruler,
colored lace;
a thick nail, awl or other tool for making holes in the cardboard.

If all the materials are prepared, then we proceed to creating a piggy bank. By the way, you can choose absolutely any size of such a piggy bank. If you take a large sheet of cardboard, you can use the piggy bank not only for coins, but also for banknotes.

Place all materials and tools in front of you. Check if everything is enough.

Armed with a simple pencil and a ruler, draw the following template on cardboard. You can also print out such a template, cut it out and transfer the design to cardboard. You should end up with something like this.

Next, bend the cardboard blank in the designated folding areas. You should end up with a cube like this.

We will not use glue or tape to hold all sides of the cube together. Using a thick nail or an awl, make holes on the workpiece as shown in the photo.

At the same stage, make a slot into which you will later throw coins or bills. You can use a pencil to mark the location of the slot, its shape, and then use a utility knife to cut a hole.

All that remains is to secure the parts of the cube with colored lace. To secure the cord firmly, tie a knot at the end.

Start “lacing up” the piggy bank in the manner shown in the photo.

The sides of the cube must be firmly fixed with a cord. If “lacing up” the piggy bank is not very convenient, then you can use thin elastic bands to temporarily fix the cube.

When all sides of the cube are connected with string, a simple money box is ready. If you wish, you can decorate the piggy bank with stickers and inscriptions.

How to make a piggy bank from a glass jar

Let's consider step by step instructions on making a piggy bank, the basis for which will be an ordinary glass jar. You can choose a jar of any size, but it is most convenient to take a liter jar.

In order to save money in a glass jar, you just need to roll it up with a lid. A longitudinal slot is made in the lid for money. At this point, the process of creating a piggy bank could well be completed. But to give more unusual looking Let's decorate the jar.

You need to cut 2 strips from cardboard (color is not important). The length of the strip should be equal to the sum of the height of the can, multiplied by 2, and the diagonal of the bottom of the can. The width of the strip should be equal to the width of the can.

Next, place the cardboard strips perpendicular to each other. The place where they connect will be the location for the bottom of the jar. Fasten the strips in this place with a stapler.

One of components the piggy bank is ready. Now we take another sheet of cardboard, on which we place our first blank. You need to add 1 cm on each side of the first blank. But we don’t need long strips, so we leave 3-4 cm on their sides. You should get a figure of the following shape.

Cut out the second blank. In its center we draw a circle with a diagonal that is equal to the diagonal of the lid on the jar. Cut a hole.

Two cardboard blanks are ready. We put our jar in the center of the first one. We bend the long strips upward.

We put the second cardboard blank on top of the jar and lower the edges down. Using a stapler, we connect two blanks in all accessible places, giving the jar a rectangular shape.

To give the structure greater strength, we additionally wrap the jar on all sides with tape.

Next we will create decorative surface for our piggy bank. To do this, prepare paper towels, which are cut into small strips about 2 cm wide.

Dilute PVA glue with water in a 1:1 ratio in a small container. Soak the cut strips in glue, crumpling them a little to form folds. Cover the entire jar with these strips. After one layer has dried, you can make a 2nd or 3rd layer. The more layers you paste, the more textured the surface will look.

After the glue has dried completely (it is better to leave the jar overnight to dry completely), you can begin painting. Choose an interesting paint color, you can add glitter to the paint. Paint carefully, without leaving white bald spots on the surface.

To make the surface of the piggy bank even more beautiful, you can apply a layer of pearlescent paint.

After the paint has dried, we begin to mask the not very attractive joints between the cardboard blank and the can. Generously coat these areas with glue and wrap with packing thread or wool.

Using the same thread you can decorate the lid. Simply coat it with glue and place the thread on top, leaving free access to the slot.

If the thread is decorative, then you can stop at decorating the piggy bank. But you can also dye the thread to match the color of the piggy bank. This is such a charming piggy bank.

How to make a piggy bank from lego

It's no secret that you can assemble many interesting things from the famous Lego constructor. A piggy bank for storing money can also be assembled from a construction set. For example, this charming pig consists entirely of construction set parts.

How to collect such a wonderful piggy bank? You can purchase a ready-made Lego set, which is designed to create a piggy bank in the shape of a pig.

Inside this set you can find a brochure with detailed instructions. You can also turn to the video review for help on creating such an unusual piggy bank.

How to make a piggy bank from a bottle

If you have long wanted to do money box from simple materials, but try to make it out of ordinary plastic bottle from mineral water, drink or milk. Let's consider detailed instructions to create such a money box:

using a sharp knife or utility knife, cut the plastic bottle into 3 parts, the middle of which should be the smallest;
Connect the upper and lower cut parts of the bottle together;
Now you need to evenly paint the bottle in the desired color. With help regular paint and brushes it will be problematic to do this, but you can try. In our case, we chose a can of pink paint, with which we covered the entire bottle including the cap;
wait until the paint has completely dried;
using a utility knife, make a rectangular slit in the middle of the bottle;
Now all that remains is to “revive” the piggy bank by turning it into a perky little pig. Eyes can be made from paper, painted with paint, or you can glue eyes from an old doll or soft toy. Pig ears can be made from triangles of corrugated paper Pink colour. Draw 2 black stripes on the cork with a marker to make a patch. A funny piggy bank that both children and adults will really like is ready.

How to make a piggy bank from a box

Various boxes are ideal for creating a piggy bank at home. They can be of any size and shape. If you have an empty box of baby cereal, formula, candy or cookies, feel free to use it to create a money box.

Before you start creating a piggy bank, prepare everything you need. You will need colored paper to cover the box, paper to create the pig's eyes, scissors, glue or double-sided tape, a black marker and a base for a piggy bank - not too bulky a box.
We cover the box on all sides with delicate pink colored paper. The fastest way to do this is with double-sided tape.
Now let's start making the pig's face. Cut out a circle that will fit on one side of the piggy bank. Also cut out small triangles for the ears, a smaller circle for the snout, small circles for the nostrils and eyes from black and white paper. white flowers. Glue the pig's face together using a black marker to add a smile to it.
You also need to cut out 4 rectangles from pink paper, which will be the pig’s hooves. Glue strips of gray paper to the bottom side of each rectangle.
Glue the finished pig's face onto the box. Also attach legs to the front of the box and to the back.
To make the pig really real, attach a playful tail made from a thin strip of pink paper to the back of the box. Now the piggy bank is from cardboard box ready. You can throw coins in there, and when you want to take them out, just tear the piggy bank apart.

How to make a piggy bank from plaster

If you want to make a more durable piggy bank, consider the following tutorial on how to make a plaster piggy bank.

We make a solution of gypsum and water in a 1:1 ratio.

Pour the resulting solution into a plastic bottle and put it on the neck balloon.
Holding the ball firmly on the neck of the bottle, pour all its contents into the ball.
Next, you need to carefully inflate the balloon, after rinsing its neck under water. Do not inflate the balloon too big as it may burst.
Tie the ball and begin to slowly turn it in your hands so that the plaster inside is evenly distributed over all the walls.
Then lower the ball into a container of water and continue to rotate it in different planes.

After the plaster inside the ball has hardened, the ball can be removed.

You should end up with a rounded plaster figure like this.

The piggy bank must have legs, which also need to be made of plaster. For this we will need ordinary plasticine. Make molds for pouring plaster and attach them to the future piggy bank. The bulge on the form will be our pig's snout. Take this into account when fixing the leg molds on the piggy bank.

Carefully pour the gypsum solution into the molds and wait until it hardens.

Then the plasticine needs to be removed. You should end up with pig legs like this.

On the opposite side of the piggy bank you need to make a slot for throwing coins or bills. Carefully drill an oblong hole.

Since the plaster may not be very smooth after hardening, you need to work on the smoothness of the surface of the piggy bank. Use sandpaper to sand the piggy bank on all sides.
Now you can start painting the piggy bank. Since it is presented in the form of a pig, we chose a soft pink shade of paint.

After the paint has dried, draw a cheerful face for our piglet. The plaster piggy bank is ready.

How to make a piggy bank from wood

Tree is another durable material, from which you can make a piggy bank. A wooden piggy bank cannot be broken, and therefore it will serve you for many years. A significant problem is that to create a piggy bank from wood you will need special tools. If you have not previously been interested in creating wood crafts at home, then this option is not suitable for you.

From a small log you can make a piggy bank. Using a special tool, cut out the core of the log, not reaching the very edge.
On the cut part of the log, it is necessary to cut a recess with a diameter that equal to diameter holes inside the log. You need to insert a stopper into the resulting niche, which will help open and close our piggy bank.

From scrap materials, make perky ears, a curled tail and a cheerful face of a piglet.

Of course, a wooden piggy bank cannot become a full-fledged piggy bank without the most important part - a slot for throwing coins. Drill it on the “back” of the pig. A charming piggy bank made from environmentally friendly material is ready. Such a pig, moreover, will become a real decoration of any interior.

How to make a piggy bank from a plastic bottle

Plastic bottles for milk or kefir can be found in any kitchen. You can make a simple piggy bank from such improvised material. Even a child can cope with this task.

Let's make a piggy bank from a plastic bottle in the shape of a space rocket. Let's cut out the windows and other parts of the rocket from colored paper.
Attach all paper blanks to the bottle using tape.
Using a waterproof marker, outline the boundaries of each window to make them clearer. You can also use a marker to draw doors or make some kind of inscription.
Using a utility knife, cut an oblong slit in the top of the bottle.
To give our rocket piggy bank a finished look, make a cone out of paper, which must be attached to the top of the bottle using double-sided tape. A simple piggy bank is ready.

How to make a piggy bank from papier-mâché

Papier-mâché is a mass of paper and glue that is very easy to shape. In this way you can make a very impressive piggy bank in the form of a space robot.

To make a piggy bank you will need: paper napkins, PVA glue, a brush, 2 balloons and paints.
First you need to inflate the balloons. One of them should be slightly smaller, since it will be the robot's head.
To make it more convenient to glue napkins, under the ball smaller diameter place some support.
Next we begin to paste over the ball. paper napkins. Take a napkin, soak it in a solution of PVA glue and water and stick it on the ball. The more layers of napkins you make, the stronger the piggy bank will be.
After the paper pulp has dried, cut the ball into a smaller diameter bottom part. You also need to cut off a piece of the top from a large ball so that the thrown coins fall to the very bottom. Balls from paper blanks, of course, need to be removed. Secure the head with glue.
Now you can let your imagination fly. Using ordinary watercolor or gouache, paint a fantastic design on the robot.
Using a sharp utility knife, carefully make a slot for coins at the very top of the piggy bank. The intergalactic robot piggy bank is ready.

How to make a piggy bank for paper money

If you prefer to save paper bills, then you can make a piggy bank with your own hands for such purposes. Such a piggy bank should not be too miniature; it should have a large enough slot for banknotes. The simplest and quick option will create such a piggy bank from a shoe box.

First, you need to firmly secure the lid to the box so that you are not tempted to take out your savings ahead of time. This can be done using ordinary tape, which you need to wrap the box in a circle.
To create a piggy bank for paper money you will need old newspapers or magazine pages. Cover all sides of the box with them. The more chaotic the placement of inscriptions, drawings, and individual pieces of newspapers, the better.
To decorate your piggy bank, you can stick “fake” banknotes on it.
Make a rectangular slit on the lid of the box using a utility knife.
To make the piggy bank more durable, carefully cover all sides of the box with tape. A simple piggy bank for paper money is ready.

How to make a piggy bank - video

Now you know how to make a beautiful piggy bank, how to make a simple piggy bank, and how to decorate a homemade piggy bank. Making your own piggy bank is very easy. Choose the method that you like best. Happy saving!

Tell

How and from what you can make a piggy bank for money with your own hands - these are questions of interest creative personalities. After all, they can decorate their apartment using only available means and their multifaceted imagination

Let's start with the fact that a person who considers himself financially literate is simply obliged to have a piggy bank in his house. Or maybe two 😉

Why should you make a piggy bank with your own hands? Because when you put your wonderful money into a piggy bank, you are most likely collecting it for something specific. For your “American” dream! And if you are building your future - dreams, desires, goals, then you need to make your own piggy bank for money.

In this article we will show you examples of shoebox piggy banks.

This article is also about how to do big piggy bank! With you and me big dreams and wishes! Accordingly, if you make a piggy bank for money, then you need to make it big.

Decorate the piggy bank with newspaper and pictures

The time required to make such a piggy bank is approximately 1 hour.

In order to do it, you will need:

box,
newspaper,
PVA glue,
stationery knife,
Pictures.

Making a piggy bank:

1. Find a box, newspaper, PVA glue and pictures.

Not only modern prints can be used as pictures. Will fit well Book covers in the form of banknotes, inserts, brochures etc. You can also take real banknotes! Not the point. The main thing is that the homemade piggy bank is covered with money. And money will flow into your piggy bank.

2. Cover the box with newspaper (walls and lid), then glue the bills. The inside of the box for the piggy bank can also be covered, or you can leave it as is.

The most important thing remains! Where should you throw your money? For this you will need a stationery knife.

3. At this stage you should be extremely careful and attentive. Using a knife, you need to cut a rectangular line a little less than 1 cm thick and about 10 cm long. Then you can safely throw both change and bills into such a piggy bank.

If you need to make a piggy bank with your own hands just for small change, then we’ll make a corresponding rectangle.

The piggy bank is pasted over, there is a hole for money in the piggy bank. What is missing?

What's missing here is a scary inscription on a piggy bank to get you out of there They didn’t steal money.

4. We make an inscription like “Don’t steal from yourself”, “Don’t touch me”, “Your duty is my enemy”, etc.

5. And, of course, you need to throw money there right away! At least 5 kopecks!

Decorate the box with paper and ribbons

In addition to newspapers and pictures, there are 100,500 ways to decorate a piggy bank. You can use buttons, rhinestones, ribbons, fabric.

To decorate this box we will need:

colored paper (plain and velvet),
glue,
scissors,
hole puncher,
ribbon (lace),
Pictures.

Making a piggy bank:

1. Take the lid and cover it with velvet paper.

If desired, we glue pictures and make applications from them. We glued a flower from plain paper. You can make the same one from fabric.

Decorate the lid and box completely.

2. Since this is not just a gift box, but a piggy bank, then the lid should not be opened.

To do this, we make holes (with a hole punch) along the rim of the box and the lid at the same level. We insert a ribbon or lace into these holes and tie it.

The edges of the tape must be treated with fire so that they do not fray.

Cardboard chest

This chest can be used for different purposes. It can be both a piggy bank and a casket, as well as ordinary element decor.
For the chest we need:

box,
scissors,
cardboard,
glue,
acrylic paint,
paint brush,
napkins.

The size of the chest directly depends on the size of the box. Therefore, do not foolishly take huge boxes!

So, we do:

1. Make a chest shape from the box using glue, scissors and cardboard. We make additional walls from cardboard so that the chest has the desired appearance.

2. Make a hole for money in the lid. This can be done in advance so as not to wrinkle the craft.

3. Additional walls can be covered with paper, fabric, wallpaper - to your taste.

5. Cover the box acrylic paint. In the photo, the piggy bank is covered with black paint. You can also use gold and red colors.

6. The outside of the box can be completely decorated different techniques. This can be plastic modeling, stained glass painting, cardboard carving, etc.

The main thing is to cover it with acrylic paint. Then the piggy bank will look rich.

7. After the chest has dried, cover it with gold paint in special places.

If you put gold on top of black, the box will look like it's expensive. So it makes sense to do this.

8. Dry the piggy bank and take pictures :)

Why is she in the house

Homemade things are generally very good for gifts.

In the 21st century, it is difficult to surprise anyone with gifts. After all, all products are available in stores, online stores, from intermediary friends, etc. Therefore, fashion is returning to DIY crafts.

A piggy bank is such a thing that never hurts in the house. We very often empty small change from the pockets of a jacket or bag by throwing it on the table.

No matter how funny it may seem, if you empty this little change into a piggy bank over the course of an ode, you can collect a small amount for going to the movies, the bathhouse, or Eve.

Some people collect so much change in their pockets that at the end of the year they have enough for Victoria Secret underwear.

How to behave with her

There are several rules for maintaining a piggy bank, described in the books of Stephen Covey, Bodo Schaefer and other financial experts.

We will describe them briefly especially for YOU:

1. Constantly unload change into the box.

2. Replenish your piggy bank every day, regardless of the amount.

3. NEVER take money from there before the allotted time. You choose this time, day, year yourself initially. And no matter what happens, you cannot draw from the piggy bank.

You yourself must understand that you will be able to collect money only if these rules are strictly followed.

Our website is replenished with a new cool piggy bank from glass jar. An interesting fact is that from a round jar we will make square shape. We’ll also throw in some new design ideas.

DIY piggy bank from a jar: what you need

Glass jar with a volume of 0.5 or 0.7 liters
Roll of paper towels
Any cardboard
PVA glue about 100 gr.
Acrylic paints
Jar lid
Packing rope
Glue Titan

How to make a piggy bank from a glass jar

To make a piggy bank, take a glass jar and screw a lid onto it, in which you need to make a hole to accept money. We threw some money into our future piggy bank to make it more fun)))

First of all, we need to make a square shape from a round jar. To do this, we take cardboard, any kind we have at home. We cut out 2 strips from cardboard, which should be of the following sizes:

length = 1 can height (fold) + can bottom diagonal (fold) + 1 can height
width = width of the can

Now these strips need to be fastened together crosswise, aligning where we will have the bottom of the jar. We secure the joints with a stapler in several places. The first blank is ready.

The second blank is also made from cardboard. Take a sheet of cardboard, place the first piece on it and add 1 cm on each side to draw cutting lines. But we don’t need such long stripes, so we leave about 3-4 cm on them.

Cut out the second blank. In the center we draw a circle with a radius equal to the lid. Cut out a circle.

Now we need to “put” the blanks on the jar. To do this, place the jar in the center of the first blank and lift the edges.

We put the second blank on the lid and fasten both blanks with a stapler, wherever we can reach it, crawl up and secure it.

For strength, we wrap the structure with wide tape.

Cut paper towels into strips. We dilute PVA glue in a 1:1 ratio. We dip the strips in glue and, passing them between two fingers for an easy squeeze, place them on the jar, simulating folds.

Thus, you need to “cover” the jar on all sides in 2 or better 3 layers. Before applying each layer, the previous one must be completely dry.

Decorating a piggy bank from a jar

The most interesting and enjoyable part of making a piggy bank with your own hands is, of course, the decor, that is, painting and decorating. For painting, use acrylic paint as a base without gloss. of blue color, for the second layer - pearlescent acrylic paint blue color and for shades - pearlescent silver acrylic paint.

Acrylic paints must be diluted with water in a ratio of 1:1 before application.

We paint our structure in the main blue matte color. The paint should cover the workpiece completely, without white gaps. Let it dry.

Apply a second layer of blue pearlescent paint, working a little superficially to create the effect of a non-uniform surface. Let it dry.

Now take Titan glue and coat the neck and the places where the cardboard blank ends with it. Leave the glue to dry for 5 minutes, and then carefully lay the packing rope on it in a circle. You can use burlap or wool thread.

The tin lid was pulled off our piggy bank and we will decorate the plastic one.

We decorate the lid in the same way using Titan glue and rope, laying it out as desired.

We paint the ropes in the same way as the jar, first in the base color, then in pearlescent. We also attached a bow made of rope to the side.

The final step in making a piggy bank from a glass jar is to drybrush the highlights with undiluted silver acrylic paint. Lightly dip the brush into the paint and go over the bumps and protrusions and the piggy bank will sparkle!

Sections