Glowing balloons: business on unusual gifts. How to make a glowing balloon How to make glowing balloons at home
Multi-colored glowing balls are bright decoration any interior. This simple, yet colorful element will decorate any children's party, party, or birthday. Making your own balls is quick and easy. The work does not require special skills or expensive equipment, and the balls will glow and delight with their radiance for more than three days.
Choose the color of the balls and LEDs
For children's party It is better to use colored LEDs, or select a luminous element to match the interior of the room. For weddings, white LEDs are often used - they glow brightly in the night sky and are a good replacement for Chinese sky lanterns.
Important!
The darker the room, the brighter the balls will glow. Therefore, it is better to launch at night.
If you are having a theme party in blue and white or blue colors, then it is better to put a white LED in the blue ball. It glows brighter than blue. In a green ball the color is almost invisible, in a pink ball it is visible. Yellow, orange and red balls can easily use a red LED - it is the brightest of all.
First of all, you need to connect the battery and the LED. To do this, use electrical tape, masking tape or ordinary tape.
Important!
Pay attention to the polarity of the battery and the LED - you need to apply the elements plus to plus, minus to minus. If they are connected incorrectly, the LED will not light up.
Both elements have a larger and a smaller surface. Large is a plus, smaller is a minus. Taking this into account, connect the battery and LED and wrap it with electrical tape. Now the LED is not going anywhere. Using this scheme, we prepare all the LEDs that you intend to use - plus to plus, wrapped, put aside.
If you purchased transparent or white balloons, it would be better if the colored trim did not stand out from the balloon. In this case, we recommend using transparent tape.
It is also very easy to attach an LED with a battery using sausage balls, which are also used to make “dogs”. Take the ball and cut it into pieces about 2 cm long - we get rubber bands.
You insert the scissors into the rubber band, move them apart, and insert the battery and LED inside the rubber band, remembering the polarity “plus to plus.” This rubber band tightly holds the LED on the battery and covers the legs, which will not tear the ball when inflated.
If you are lucky and you bought large balls, then the LED can easily get inside. If the ball is small, then you need to carefully push it deep into the ball.
Important!
Better take big balls.
You can also stretch the ball and put LEDs inside. It will be much faster. In addition, by stretching the ball, you additionally test its strength. And if there are holes in it, then it will break.
Inflating the balloons
When you inflate balloons, you must protect your eyes, because no matter how good the balloons are, there will definitely be holes in them. And when the ball bursts and the LED flies out, it can injure your eyes.
Important!
We put the ball on the gas cylinder. You need to inflate it until a small balloon appears. If you overinflate a balloon, deflate it a little because an overinflated balloon will pop on its own. We make a drop-shaped ball and tie it with a ribbon.
Balloons and bright lanterns are a common attribute of many holidays. Separately they are good, but together they are even better. Creating glowing balls will not take much effort or free time, but the result will exceed all expectations.
You will need: ordinary multi-colored balls, button batteries, LEDs, scissors, adhesive tape, eye protection glasses, gas cylinder, as well as ribbons to tie the balls.
Video instruction: How to make glowing balloons with your own hands.
To please a child or your significant other, you can make a glowing, ice ball. Its disadvantage is that it will melt when room temperature, but if you decorate the yard with such balls on New Year’s Eve or Christmas, then you and your guests will experience a real holiday atmosphere. The ball will glow until it melts or until the batteries in the LEDs burn out. Try to surprise your guests and neighbors with such an amazing craft.
We invite you to familiarize yourself with the process of making homemade products.
To create a glowing ball we will need:
- expander;
- pliers;
- any marker;
- balloon;
- several LEDs;
- cup.
So let's begin. We pour plain water into a glass. 200 grams is enough for us. You shouldn't take too much water, because then we will still have to add it from the tap. We need this amount so that the dye can dissolve and give the water the desired shade.
We take, break our marker and take out the cotton wool from it. We will use this cotton wool as a dye.
We throw the dye (in our case, cotton wool from a felt-tip pen) into a glass of water. To better color the water, it is better to rub the cotton wool. Can be used food coloring, which remained after Easter, and if there is neither one nor the other, dilute a little gouache or watercolor in water.
Now we take our LEDs, turn them on and wrap them with electrical tape, leaving only the bulbs burning. Electrical tape is needed to wrap the wires and the battery connection. Then they will be thrown into the water and it is highly undesirable for the water to come into contact with the batteries.
The next step is to pour a little dye diluted in water into the balloon.
After you have poured a glass of water with dye into the ball, we lower the LEDs into it. They must be thrown directly into the water.
Next, add to the ball ordinary water from the tap. In size you should get a small melon. Don't make the ball too big, it will be very difficult to fit it in the freezer and the effect of the diodes will not be the same.
We tie the ball into a knot at the base.
Now the ball must be placed in the freezer and wait 2 hours.
Will decorate any children's party, party, birthday. Making your own balls is quick and easy. The work does not require special skills or expensive equipment, and the balls will glow and delight with their radiance for more than three days.
Choose the color of the balls and LEDs
For a children's party, it is better to use colored LEDs, or select a luminous element to match the interior of the hall. For weddings, white LEDs are often used - they glow brightly in the night sky and are a good replacement for Chinese sky lanterns.
Important!
The darker the room, the brighter the balls will glow. Therefore, it is better to launch at night.
If you have a theme party in blue and white or blue colors, then it is better to put a white LED in the blue ball. It glows brighter than blue. In a green ball the color is almost invisible, in a pink ball it is visible. Yellow, orange and red balls can easily use a red LED - it is the brightest of all.
First of all, you need to connect the battery and the LED. To do this, use electrical tape, masking tape or ordinary tape.
Important!
Pay attention to the polarity of the battery and the LED - you need to apply the elements plus to plus, minus to minus. If they are connected incorrectly, the LED will not light up.
Both elements have a larger and a smaller surface. Large is a plus, smaller is a minus. Taking this into account, connect the battery and LED and wrap it with electrical tape. Now the LED is not going anywhere. Using this scheme, we prepare all the LEDs that you intend to use - plus to plus, wrapped, put aside.
If you purchased transparent or white balloons, it would be better if the colored trim did not stand out from the balloon. In this case, we recommend using transparent tape.
It is also very easy to attach an LED with a battery using sausage balls, which are also used to make “dogs”. Take the ball and cut it into pieces about 2 cm long - we get rubber bands.
You insert the scissors into the rubber band, move them apart, and insert the battery and LED inside the rubber band, remembering the polarity “plus to plus.” This rubber band tightly holds the LED on the battery and covers the legs, which will not tear the ball when inflated.
If you are lucky and you bought large balls, then the LED can easily get inside. If the ball is small, then you need to carefully push it deep into the ball.
Important!
Better take big balls.
You can also stretch the ball and put LEDs inside. It will be much faster. In addition, by stretching the ball, you additionally test its strength. And if there are holes in it, then it will break.
Inflating the balloons
When you inflate balloons, you must protect your eyes, because no matter how good the balloons are, there will definitely be holes in them. And when the ball bursts and the LED flies out, it can injure your eyes.
Important!
We put the ball on the gas cylinder. You need to inflate it until a small balloon appears. If you overinflate a balloon, deflate it a little because an overinflated balloon will pop on its own. We make a drop-shaped ball and tie it with a ribbon.
Balloons and bright lanterns are a common attribute of many holidays. Separately they are good, but together they are even better. Creating glowing balls will not take much effort or free time, but the result will exceed all expectations.
You will need: ordinary multi-colored balls, button batteries, LEDs, scissors, adhesive tape/duct tape, eye protection, a gas cylinder, and ribbons to tie the balls together.
Video instruction: How to make glowing balloons with your own hands.
Balloons are great decoration for the holiday. A huge number of colors, shapes and sizes allows you to decorate the room and set the mood for the celebration. Here I will tell you how to surprise all the guests at your next party very interesting decor and make beautiful glowing balls
We will need:
- Balloons
- 5-10 pcs. LEDs
- 5-10 pcs. 3V batteries
- Scotch
Take a balloon and place one glowing LED in it. All you have to do is inflate the balloons with air and you're done!
If you want your balloons to float in the air, fill them with helium. Depending on the type of LED and battery, the balls will delight you with their glow for 24-48 hours.
This is enough for any holiday. After the party is over, simply remove the LEDs from balloons and save them for the next celebration
Balloons are perhaps the most common decoration used to decorate banquet halls and apartments for the holidays. Meanwhile, luminous inflatable balloons began to be used relatively recently.
Children will especially appreciate this type of decor. Multi-colored glowing balls look really magical and attractive. If they are also filled with helium, they will be located near the ceiling, creating a fabulous effect.
If you decide to decorate the room yourself using flying glowing balls, it is recommended to acquire the following:
- helium balloon;
- button batteries CR2032 (3 V);
- bright LEDs (white light);
- tape or tape.
There is nothing difficult in creating glowing balls. The only thing that complicates the process is the time spent on it. However, if the balls are being created, for example, to decorate a wedding celebration, children can be involved in creating the glowing balls.
This way they will get a feeling of being involved in the holiday, and at the same time you will remove them from under your feet (fidgets often get in the way in the general commotion) and save money at the same time. Naturally, it will first be necessary to demonstrate several times how a luminous ball is created.
Creation method – simplicity and speed
First you need to make sure that the ball is not defective. With one breath, fill the ball with your lungs, pinch it with your fingers and make sure that it has no holes and holds air without any problems.
However, the air that is in the lungs is warm. This may cause condensation (water droplets) to form inside the ball. It is not good. For this reason, it is better to use a special pump to inflate the balloons.
If the ball is of high quality, we deflate the air and place a luminous element inside it. It is being created in the following way: A battery is clamped between the LED plates. As a result, the LED begins to glow.
Carefully wrap the battery and covers with electrical tape or tape. This will ensure a constant glow, as well as protect the ball from punctures by sharp covers (contacts) of the LED from the inside.
After the luminous element is placed inside the ball, you just need to fill it with helium from a balloon and tie it tightly so that the gas does not escape from it. As you can see, even a child can cope with such a task.
The video will demonstrate the creation of luminous balls from “A” to “Z”: