Christmas trees made from plastic bottles. New Year's craft: DIY Christmas tree made from plastic bottles

Brisk trade will open on city streets in December Christmas trees. It would seem that we should rejoice at such an abundance of New Year's markets, but often we feel sincerely sorry for the green beauties cut down at a time when they were just beginning to grow. Fortunately, many people are now purchasing artificial plastic trees or even making them at home from the most unusual means at hand - lemonade bottles, balloons, tinsel, pine cones and even books! Today we will share with you new information on what and how to make a Christmas tree with your own hands for the New Year 2018, how to decorate it, what crafts you can bring to school and kindergarten for the competition. From our master classes with step by step instructions and photos you will learn how to make a green miracle with your own hands from paper and cardboard, cotton pads, threads and ribbons.

How to make a Christmas tree from ribbons with your own hands for school step by step: a master class at home for the New Year 2018

There are probably no materials left from which craftsmen have not tried to make New Year trees. Everything is used - from pine cones and paper sheets to soft toys and beads. But perhaps you haven’t heard yet how to make a DIY ribbon Christmas tree for school at home. Then this video and master class is for you!

Video master class on making a Christmas tree from ribbons

After watching the video below, it will become clear to you how to make a small Christmas tree with your own hands in normal home conditions for school from satin ribbons. This elegant mini-tree will need to be decorated with artificial pearl beads or large beads. However, this video master class will be useful only to those who know how to deal with small details and are accustomed to making small crafts.

How to make your own Christmas tree from paper or cardboard at home for the kindergarten for the New Year 2018

Before the New Year, teachers often give preschoolers simple tasks - they invite the children to make something for the upcoming holidays: a gift box, a snowman made of cotton wool, New Year's toys. Perhaps, after reading our recommendations and watching photos and videos of master classes, parents will be able to explain to their daughters and sons how to make a Christmas tree for kindergarten with their own hands from paper or cardboard at home.

Master class on making a Christmas tree from paper with step-by-step photos

You've probably seen how diligently kids make different paper crafts for the holidays. How enthusiastically the eyes of the children shine when they realize that everything is working out just fine for them! This simple master class with step by step photos will explain to you how you can make a Christmas tree at home kindergarten— crafts are made with your own hands from paper or cardboard. In addition, you will need:

• Pencil;
• Scissors;
• Tinsel;
• Fluffy wire;
• Glue;
• Sequins;
• Rubber;
• A stand with filler or a large decorative candle.

How to make a Christmas tree with your own hands at home for school for the New Year's craft competition 2018

Before the New Year, schools often ask children to bring homemade toys New Year themed. At the same time, the most popular product is always the Christmas tree. If you want to learn how to make the best Christmas tree with your own hands at home and win a crafts competition at school, read our instructions, remember the recommendations of the master classes, and watch the video with explanations.

Crafts New Year tree for a school competition - Master class with photos step by step

The most talented children always participate in school competitions. Fighting for a prize place, they think through the most unexpected in advance, original products and looking for them suitable materials. After reading how to make a Christmas tree with your own hands at home for a school crafts competition, the children will be able to make unusual New Year trees. They can decorate both the classroom and the shelf with souvenirs. Carefully read all the instructions in the master class and get to work.

The Christmas tree can be made in another way. Just stick bright paper ribbons onto the cone until you get such a miracle.

How to make a Christmas tree from cotton pads at home with your own hands: master class with photos

Did you still think that cotton wool pads sold in supermarkets and pharmacies are only sold by ladies who use them to remove makeup? No, they are also purchased by folk craftsmen and amateurs unusual crafts. If you want to make a fluffy New Year's beauty covered with snow, read how to make a Christmas tree from cotton pads at home with your own hands: a master class with photos will explain all your steps to you. The size of the product will depend on the size of the Whatman paper for the craft.

Christmas tree made from cotton pads step by step - Master class with photos of children's crafts

Having learned how to make a beautiful Christmas tree from ordinary cotton pads at home with your own hands, by turning to our master class with photos and explanations, you can surprise all your friends and family. It’s rare to see an artificial spruce of such beauty! Try to do it yourself.

Before starting work, prepare:

• Whatman sheet;
• Glue stick;
• Stapler;
• Lots of cotton pads;
• Scissors;
• Band-Aid;
• Decorations for finished crafts.

How to make a Christmas tree with your own hands from threads at home for the New Year 2018: video master class with explanations

Among all the Christmas trees, made from the most unusual materials Probably the lightest tree in terms of weight is considered to be a thread tree. Well, what about ak at home to make a simple but durable and beautiful Christmas tree with your own hands from threads, a video master class with explanations from the author of such an unusual craft will explain.

DIY Christmas tree made of threads: master class on video at home

In order to surprise your friends who come to visit you for the New Year, watch how to make a Christmas tree with your own hands from threads at home: a video master class with explanations will give you all the necessary tips. This craft is quite inexpensive, and it always looks amazingly airy!

How to make a Christmas tree with your own hands from tinsel to celebrate the New Year 2018: step-by-step instructions with photos for kindergarten and school

We often feel sorry for cut down Christmas trees, so many are looking for an alternative to a real New Year tree. It could be an artificial homemade spruce made from shiny decor. Having learned how to make a Christmas tree with your own hands from tinsel for 2018, you will give up the idea of ​​going to the Christmas tree market.

Christmas tree 2018 made of tinsel - Master class with photos and instructions

Having prepared inexpensive, accessible materials and tools, and remembering how to make a chic Christmas tree with your own hands from shiny tinsel for the New Year 2018, you can get to work. Just in case, let the page with the master class and instructions for making the craft open on it.

How to make a Christmas tree with your own hands step by step from available materials and books: a master class for children for the New Year 2018

How can you imagine a modern New Year tree schematically? Essentially, it is a triangular, colorful structure, decorated with shiny decorations, beads and garlands. Some craftsmen manage to make spruces even from glossy magazines! We will tell you how to make a Christmas tree with your own hands from available materials and books.

Christmas tree from books - Master class with step-by-step photos

After getting acquainted with a master class explaining how to make the most unusual Christmas tree with your own hands from various improvised means and books available in your home library, you will understand that such an activity will bring you true pleasure. Well, when was the last time you held thick volumes of novels in your hands? Now you will do it with pleasure!

What to make a Christmas tree from with your own hands: master class on crafts from pine cones

The most “alive” Christmas trees are those made from natural materials. If you really want to know what you can use to make a realistic Christmas tree with your own hands, a master class with explanations on how to create crafts from pine cones will help you prepare for the New Year 2018.

Christmas tree for the New Year 2018 from pine cones - Master class with instructions

If you are looking for something to make a Christmas tree with your own hands, the pine cone crafts master class, or rather, each of its instructions, will answer all your questions. In addition to dense, but fully opened buds, you will need the following:

• Thermal gun;
• Hot glue;
• Scissors;
• Cardboard;
• Flowerpot;
• Tinsel and toys;
• A can of white or silver (gold) paint.

Let us immediately make a reservation that you can choose any size of spruce. Of course, for production big tree more than a dozen cones will go away.

What can you use to make a Christmas tree for crafts for the New Year 2018 and how to decorate it

Having decided that under no circumstances will you buy from Christmas tree market felled tree, thinking about what you can use to make a Christmas tree for crafts for the New Year 2018 and how to decorate it, refer to the master classes presented on this page. One of them tells how to make a cotton Christmas tree. When following step by step instructions home craftsmen always end up with a fluffy white beauty!

White fluffy Christmas tree made of cotton wool - Master class with photos

If, after much thought about what you can use to make an original Christmas tree for crafts for the New Year 2018 and how to decorate it in an unusual and bright way, you have decided that the most cheap option- for you, read our master class and look carefully at its photo. Create a beautiful Christmas tree using ordinary cotton wool!

How to make a Christmas tree with your own hands from plastic bottles and how to decorate it

Sometimes we, throwing away seemingly completely unnecessary things, do not realize that you are sending a valuable one to the trash heap. construction material for the most unusual crafts. Having learned how to make a Christmas tree with your own hands from plastic bottles and how to decorate it, you will most likely reconsider your attitude towards some “garbage”.

Green Christmas tree made from plastic bottles: master class with explanations

Probably, after drinking lemonade or Sprite, you throw the used bottle into the trash without regret? In vain. If you are looking for what to give a friend for the New Year, our master class with explanations on how to make an original green Christmas tree with your own hands from plastic bottles and how to beautifully decorate it will help you in choosing a gift for the holiday.

For work, prepare:

• Green plastic bottle;
• Scissors;
• Cork plug;
• A candle;
• Glue;
• Foam rubber;
• A small plastic cup for yogurt or mousse.

Now, having familiarized yourself with several wonderful master classes explaining how to make a Christmas tree with your own hands from various available materials, including plastic bottles, ribbons, pine cones, tinsel, books, threads, cotton pads and paper, you and your child will be able to make excellent crafts on New Year 2018 in kindergarten or school. Perhaps your product will take first place in the competition, and all competitors will begin to puzzle over what you made such beauty from.

Make or buy? Pessimists or simply lazy people, of course, will object: why make something out of trash.

But it is worth noting that plastic bottles are an excellent ready-made material for crafts. And, in addition, a person’s hands and head work, imagination searches for solutions, logical thinking develops, and you can still make money from this.

Let's not invent anything new, but show interesting ideas and the works of wonderful needlewomen, whose inventions are inexhaustible.

Collecting materials which will be useful for making a Christmas tree from plastic bottles with your own hands:

• plastic bottles with a volume of 1.5-2 liters, ideally green, blue or silver
• scissors
• sharp knife
• thick A4 paper
• narrow tape
• double sided tape
• glue moment or universal
• candle
• ornaments for decoration

First version of the Christmas tree

We do it as in Fig. 1-3. For this:

• Step 1. We collect 2-4 bottles of the same color, or different sizes. The more bottles, the taller the tree will be.
• Step 2. Cut the bottle into 3 parts with a sharp knife, separating the neck and bottom.
• Step 3. We use the bottom as a stand; for strength, cover the inside with plasticine, for example, or stick decorative pebbles on top.
• Step 4. We make the barrel out of thick paper, which we roll into a tube and insert into the neck. It is better to fix the free edge of the tube with glue or double-sided tape. For the trunk, you can also pick up a ready-made tube, which you may have lying around on the farm.
• Step 5. We cut the middle part lengthwise, then into rectangles of equal width, from which we will make branches. One bottle will yield 3 rectangles; for a Christmas tree, 9-12 pieces are enough. Every 3 pcs. make the length shorter by a couple of centimeters.
• Step 6. In each workpiece we make fringe needles with scissors, without cutting the strips to the end of 1-1.5 cm. The narrower the stripes, the fluffier the tree will be.
• Step 7 To make the fringe curly, using a dull knife blade, holding it with your thumb, stretch the strips a few pieces at a time, i.e. not all at once. It's not easy, but it will be effective.
• Step 8 All that remains is to attach our branches to the trunk. We begin to wind the longest fringe around the trunk from below, then overlap the next one, securing each branch with tape. And so on to the very top. If the trunk turns out to be longer, just trim it carefully
• Step 9 For the top of the head, you can use one of the blanks, rolled into a tube or other prepared decoration
• Step 10 We decorate the finished Christmas tree as your imagination dictates, but it’s better to let the children do it.

Helpful advice: you can start decorating the Christmas tree at the manufacturing stage. Decorate or cover your workpieces with decorative sparkles and sequins, paint the edge of the fringe, for example, white.

Fig 1 - Option 1 (what should happen)
Fig 2 - Option 1. Manufacturing stages 1-7

Fig 3 - Option 1. Manufacturing stages 8-12
Fig 4 - Herringbone. Option No. 2

That's all, the green Christmas tree from a plastic bottle is ready!

The second version of a Christmas tree made from plastic bottles

For this Christmas tree you will need several plastic bottles, either colored or can be pre-painted. Figure 4 shows all stages of the work.

Step-by-step description of the process:

• Step 1. Using a sharp knife, cut off the bottom of all bottles. We leave one bottom for the base-stand, do not throw away the rest, they will be useful for other ideas.
• Step 2. We cut the upper part into approximately equal strips 2-3 cm wide, without cutting to the end of the neck. The result was twigs. It is clear that the more bottles, the taller your beauty will turn out.
• Step 3. Next, on each branch we make parallel cuts on both sides, i.e. imitation of needles, which we bend in a chaotic manner. Does it look like spruce branches? Then let's continue.
• Step 4. For the prepared stick-barrel or maybe you have a suitable metal one, plastic pipe, we string the bottles sequentially. All neck down and start with the largest one if you have them of different sizes. No glue or tape, tightly to each other.
• Step 5. We make the stand, as in the previous model of the Christmas tree, with some nuances:
  - we take into account that the structure will be heavier - once;
  - on the ends of the barrel, we fasten the plugs so that it does not jump out of the hole, and on the other side, in order to secure all the bottles put on - two.

You may have to use male help and ingenuity.
Here is another version of the Christmas tree, all that remains is to decorate it.

Two original green beauties

The third design option in Fig. 5. The principle of making a Christmas tree from plastic bottles with your own hands, as you understood from the previous options, is similar.

Let's take a quick look features of this option:

1. In this case, the middle of the bottle is cut into squares.
2. Using a prepared stencil, cut out circles from squares.
3. In the middle, use a hot nail to burn holes in each piece.
4. We make strip cuts in a circle, not reaching the middle by about 1 cm.
5. Then the resulting needles can be slightly curled, as in the first option, or melted at some distance above the candle.
6. For the stand, we use the bottom of the bottle, where we also make a hole and insert either a skewer, or sushi chopsticks are perfect.
7. We put the twigs on the resulting trunk, but there is one caveat: you need to come up with some kind of detail to put on between them - it could be a cork, it’s great if you can find large beads with a suitable hole. We decorate either each detail before assembling it, or the finished Christmas tree.

Fourth option Fig. 6.

Fig 5 - Green beauty. Option #3
Fig 6 - Green beauty. Option number 4.

In addition to the above, prepare a cork from wine bottle, a strip of foam rubber, a hard plastic cup.

The action plan is:

1. The first step is all the same as in the previous options - we cut rectangles, then we make various stars out of them - these will be the “paws” of the spruce.
2. Let's hold the resulting pieces over the fire just a little bit so that they bend slightly.
3. We will make multiple cuts at the tips of the “legs” - this will make it more beautiful.
4. Now we will glue a piece of foam rubber to the parts, the result will be a pyramid.
5. The trunk of such a Christmas tree will be a cork plug.
6. Drop a little glue into the glass and attach the cork to the bottom.

The Christmas tree made from plastic bottles is ready, you can give it for the New Year!

At the bottom there should be the largest bottles (2 and 1.5 liters, in the middle - liter bottles, and at the top 0.5 and 0.3 liter bottles. If you have bottles of the same volume, then adjust the length of the “branches” yourself by cutting strips to the desired length.

Make a hole in the left bottom, which you secure to the lower end of the stick using a plastic bottle cap (you can hammer a nail in for strength).

Place the last, smallest piece, neck up, on the upper end of the stick and screw the green plug onto the neck, also securing it with a nail for strength.

A little patience, perseverance, effort and the forest beauty is ready!

Such Christmas trees can be used as New Year's decoration your houses!

Method 2. To make such a Christmas tree you need a minimum of time and expense. A master class on making a Christmas tree from plastic bottles will tell you in detail how to make such an original New Year's craft.

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

Method 3. And finally, the last option for today is a Christmas tree made from plastic milk bottles (what decorative New Year trees are not made from...). The design is completely collapsible, has the maximum resemblance to the original, does not require particularly complex technologies or specific work skills, there are no problems with bottles either, and a holiday is just around the corner...

Materials and tools

The material for making the Christmas tree is a milk plastic bottle or part of it (Fig. 1). To make a homemade tabletop Christmas tree, you will need 5-20 milk/kefir plastic bottles with corrugation at the bottom. The number of bottles determines the number of branches and tiers. The more branches, the more fluffy the Christmas tree is; the more tiers, the taller it is.

In addition to bottles, you only need scissors and technology plastic rivets

Plastic rivets

To implement the technology of plastic rivets, it is necessary to have a means for melting (installing) the rivets and the rivet itself. You need to manage to melt the head of the rivet using a hot nail or lighter. You can do this in the same way with a well-heated soldering iron. In addition, you will need clamps and tweezers to install rivets in hard-to-reach places.

For plastic rivets, it is very important to choose the material. After fumbling for about a year, through trial and error, taking into account the requirements of strength and availability, I identified several sources for obtaining plastic rivets:

1. Empty rods from ballpoint pens. Enough available material. They are good because they are colorless and the compound, with their help, turns out to be organically integrated into the product made from plastic bottles. Such a rivet turns out neat, with a round head, however, it has a slightly reduced tensile strength. In addition, the rod from ballpoint pens is round in cross-section and completely fills the drilled hole in the parts being connected. By the way, the walls of the rods come in different thicknesses; for rivets it is better to use rods with thicker walls.

2. Chupa Chups sticks. Similar to option No. 1 only in color. The connection is more cumbersome, and the rivet head melts with difficulty (it either burns, becomes ugly, or unreliable).

3. The most perfect option, and it’s very convenient (I’m giving the world a proposal) to use material from buckets of 3, 5, 10 liters of construction mixtures. There are quite a lot of them left after repairs, and even one lasts for a long time.

From the walls of such a bucket you need to cut a ring, and cut the ring along the generatrix (this is the only way) into strips 2...4 mm wide, length from 4 to 15 cm. These will be the blanks for rivets, and, moreover, the best and most affordable, in almost unlimited quantities quantity.

Obtaining a connection using such rivets is simple. It is more convenient for this to prepare rivets of the required length in advance, melting the head of the plastic rod on one side. To connect two parts with plastic rivets, we overlap the parts, melt them with the same burner, forming a hole of the desired profile and size, insert a rivet there and, by melting, form a head from the opposite end of the rivet rod. After practicing reflowing several times, the head turns out neat and tear-resistant.

Let's get started...

To implement the idea, a source material is required in the form of a part of a plastic milk bottle (Fig. 1a), which is cut along the circumference into two components (Fig. 2 and Fig. 3, respectively). A trunk will be formed from the part adjacent to the neck (Fig. 1b), and branches of the future New Year tree will be cut out from the ring with a central groove (Fig. 1c). One whole plastic bottle produces two or three rings. The more rings you prepare, the fluffier and taller the Christmas tree you can assemble. I had at least 20 of these rings (10 full bottles).

Plastic rings with a groove in the middle need to be cut into several equal parts (Fig. 2) along the forming elements of the bottle cylinder. As a result, we get convex rectangles. If you cut into 2 parts, then from such long halves you will get long lower branches of the Christmas tree, if you cut into 3 equal parts, you will get branches of medium tiers and medium length, and cutting into 4-5 parts, you get small blanks for the upper tiers of a tabletop Christmas tree . It is not at all necessary to observe particular uniformity in the dimensions of the rectangles for one type of tiers.

Next begins the rather tedious work of forming the branch. From each plastic convex rectangle (Fig. 3a), a wedge-shaped blank should be cut out with scissors (Fig. 3b). The axis of symmetry of the wedge-shaped part should be located along the corrugation groove. Immediately after cutting the workpiece, “needles” should be formed on it, making cuts along the side edges at approximately 45 degrees to the groove and radially at the end of the “branch”. (Fig. 3c). The needles are alternately moved out from the plane of the workpiece, also at 45 degrees to each other. Placing the needles up and down relative to the plane of the branch provides fluffiness to the Christmas tree.

As a result of such painstaking work, several sets (Fig. 4) of branches of different sizes are obtained for a desktop homemade Christmas tree. Cutting branches and then needles is quite a long task, but you can entrust this to your family as part of a collective creativity to decorate life under New Year. It should be noted that it is difficult to accurately determine the number of branches forming a specific tier by eye, so you should always have several rings in stock (Fig. 1c) for cutting branches during the installation of tiers

The place for attaching branches is the trunk, which consists of several parts (logs). The top parts of plastic bottles (Fig. 1b) were considered waste during the separation of the rings (Fig. 1c), but now they are also used in tree making to create a trunk. The base of the trunk and the lower log is the full neck part of a plastic bottle (Fig. 5a). The upper logs are assembled from blanks obtained by cutting off the threaded part of a milk bottle with a flange, as well as removing a segment of plastic along the generatrices (Fig. 5b, 5c). The segments need to be rolled into a tube and secured on both sides with plastic rivets. In a similar way, it is necessary to create several logs to attach tiers of branches. In my case, these are 3 logs, but there could be more or less. For a miniature Christmas tree, 3-4 tiers of branches on just one log are enough.

Naturally, the diameter of the trunk should taper towards the top of the tabletop tree and the diameter of the upper log should be smaller than the lower one. The larger the cut of the segment, the higher the log obtained from the conical top of the plastic bottle. For the top you need a half segment, and for the middle part about two-thirds of the whole neck (Fig. 5b). The diameter of the lower hole of the upper log should be approximately 1 mm larger than the upper hole of the lower log forming the trunk.

It's time to attach the branches to the "logs". Each log will need to place 2-3 tiers of branches. The small number of tiers does not allow effectively covering the rivet heads with branches, and a large number of spoils the aesthetic appearance of the Christmas tree. In each tier of this design you can install from 4 to 10 branches. Fastening is carried out using plastic rivets, since you will need quite a lot of plastic rivets, it is better to prepare them for future use. The easiest way is to place the branches in tiers on the lower logs (Fig. 6), since the neck of the plastic bottle is wide enough and it is convenient to hold the plastic rivet with inside finger.

If you place the branches closely along the circumference of the tier, then one rivet is enough to attach the branch to the trunk (Fig. 6-8). For those who like greater reliability, they can install two rivets side by side. The tiers of branches must be formed like the roof deck of a house - from the bottom up, then the branches of the upper tier will cover the rivets of the lower one and the heads of the rivets will be completely invisible.

In my case, in the lower (Fig. 6) and middle (Fig. 7) log of the trunk there are 2 tiers of branches, and in the upper one - 3 (Fig. 8). There are 5 tiers of branches in total. It’s quite enough to look amazingly similar to a real tree. Installation of plastic rivets on upper tier, due to its small diameter, should be done using tweezers or a medical clamp.

After securing all tiers on all logs, you can begin final assembly. But first it is advisable to decide on the top. In my case, without thinking for a long time, I built the top using the same technology as the trunk (Fig. 5), that is, by rolling the plastic into a cone. But you can do this in another way, for example, in the form of an asterisk or a ball (I like the cone better). The top of the tree is attached to the upper element of the trunk also using a rivet, installed from the inside and melted from the outside. Top part trunk, together with the top, already has a miniature tabletop Christmas tree itself (Fig. 9). You can install it on your monitor and enhance the holiday feeling...

A living Christmas tree grows from the bottom up, in the same order, and we collect logs with tiers of branches by adding “logs” (Fig. 10) to the already existing Christmas tree. It is better to connect the trunk elements together in a place covered by a branch, at three points along the circumference of the trunk. In this case, the trunk becomes rigid and will not break if the Christmas tree accidentally falls to the floor from the table, the Christmas tree is a tabletop one...

And if you insert a dynamic light part (for example, a garland) inside the Christmas tree, then on New Year’s Eve it will amaze those around you with its charm:

Here is such a master class. Of course, it’s a little complicated, but what a beauty it turns out!

1. Christmas tree made from plastic bottles

Prepare a Christmas tree like this green plastic bottle, scotch, scissors(such that they can easily cut a plastic bottle, Whatman tube. The only thing you can add to such a Christmas tree is to decorate it with beads, gluing them to the Christmas tree with glue. You can hang a rain ribbon. You can make this craft with your children. Next, we do everything as in the photo:

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

So, cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.

The next step is to roll the Whatman paper into a tube. We insert it into the neck of the bottle and secure it with tape in a circle.

You can decorate the top of our New Year's tree with a homemade Christmas tree toy or complete the tree the way we did.

If you want to make a fluffier Christmas tree from PET bottles, like the one in the photo below, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

2. For Christmas trees made from plastic bottles You will need green bottles of various sizes and a wooden stick with a diameter slightly smaller than the neck. The length of the stick will determine the height of the tree and the number of bottles.

I guess it's ready)

4. Another very interesting option

For production we will need:

• scissors
• green bottle
• cork plug
• round glass of cottage cheese dessert
• candle
• glue.

Also find foam rubber. We cut a piece of a kitchen sponge for washing dishes.

First, cut the green bottle into squares or circles different sizes. For the bottom of the Christmas tree, the width of the square should be at least 6-7 cm, for the middle - about 5 cm, for the top of the head 2-3 cm is enough.

Now, using scissors, we densely break through the edges of the stars. You can call your household for help. In fact, the work is painstaking and requires a lot of patience. Edging the edges takes approximately 30 minutes. To make the spruce paws look more natural, we bring the plastic to the flame of a candle. The tips of our coniferous branches will gracefully curl down. Here is the finished result.

It's time to apply glue and foam rubber. Cut the sponge into small pieces (1x1 cm).

Now we lubricate the largest spruce paw with glue, and put a cube of foam rubber on top. Add glue again and cover it with green plastic.

We continue working until we run out of parts. Don’t forget that we are “building a pyramid”, and therefore with each subsequent gluing we focus on the size of the plastic star.

All that remains is to design the trunk of the coniferous tree. Of course, its role will be played by a cork plug. However, to make the craft resistant to tipping over, we will place a small yellow bucket in the tree. Let's cut it out of a round cup.

Lubricate the bottom of the bucket with glue and place a cork barrel in the center. Set aside the part for 2-3 minutes, let it dry completely.

We connect the crown with the trunk. The result was a slender emerald Christmas tree made from plastic bottles. A real forest beauty.

Bottom line

5. By the way, the Christmas tree also looks quite creative with larger “branches”
We cut the bottle into 3 parts. Only make cuts in a circle towards the center, straight.

A puncture is made in the center with an awl and the needles are bent up and down in order. A puncture is made in the lid of the cream or mineral water into which a skewer of the required length is inserted.

The parts are strung in descending order, with a large bead placed on top of the glue. The Christmas tree can be decorated with polystyrene foam, rain, etc.

Glue the Christmas tree onto the disk stand.
The Christmas tree is ready

Make a Christmas tree with your own hands, cheaply, cheerfully and, in addition, quickly? This is possible, especially if there is a little accumulation in your home. plastic containers- bottles or cups.

We present to your attention a double detailed master class: how to make an exclusive New Year’s structure with your own hands from recycled materials.

Master class 1: Christmas tree made from plastic bottles

We will need:

• plastic bottles of different sizes, from 0.3 to 3 liters. Preferably green;
• a wooden stick, the height of which is the same as our Christmas tree. The diameter of the stick should be slightly smaller than the diameter of the neck of the bottles;
• bottle cap;
• stationery knife;
• scissors.

Stage one:

Carefully cut off the bottom of all plastic bottles. Carefully, use a stationery knife - first you need to make a puncture in the wall, and only then saw around the circumference. If sawing with a knife seems difficult, then you can cut with scissors. We leave one large bottom - it will serve as a support on which the Christmas tree will rest. The remaining bottoms can be thrown away.

Stage two:

We cut bottles with sawn-off bottoms into strips 2-2.5 cm wide, naturally, without bringing the cut to the neck. As a result, we get a kind of plastic “flower”.

Stage three:

We cut each strip along the edge, leaving a distance of 0.5 mm between the cuts. These are our “needles”. This way we will be able to make the future Christmas tree “fluffy”. We bend each “needle” - the branches turn out “lush”.

Stage four:

We carefully string the branches onto a stick with our own hands - this is how the Christmas tree is assembled. Wider blanks (from larger-volume bottles) will naturally be at the base, and smaller ones (bottles of smaller capacity) will be at the top. We put the bottom of the bottle on a stick, this will be the base on which the tree rests. We screw the cap on top, you can hammer in a nail for strength.

Christmas tree made from plastic bottles is ready! Decorate! Tinsel, rain and simple matte balls will look great on such a unique New Year's beauty. A garland on an ascetic plastic tree can also look very stylish. Experiment!

Master class 2: how to make a Christmas tree from cups

The most difficult thing in this procedure is perhaps finding green cups.

We will need:

• plastic cups;
• stapler;
• glue;
• toys, balls for decorations.

Stage one:

We place eight cups in the first row with our own hands, in a semicircle. We fasten them with a stapler. Then we put the second row on top - already seven cups. We also fasten them with a stapler. And so on, each row is one glass less. The rows can be lightly glued together for reliability, and also secured with staples. The finished tree should be stable.

Stage two:

Place a toy or ball in each cup. You can drip a little glue so that they are securely fixed inside. By the way, if you have a special glue gun– great, it will help you attach toys to the plastic unnoticed.

Original Christmas tree from plastic cups ready! But if you think that this idea is not creative enough, then here are options for decorating or modifying such a structure with your own hands:

• You can lay out the cups not in a semicircle, but in a circle. Only in this case is it better to “plant” them on a base made of a cardboard cone. Such a tree will have an attractive “facade”, that is, it can be placed in the center of the room, while a semicircular one looks good when standing against the wall.
• If you make a small cut in the top of each cup, you can pass a ribbon through it, secure it with a knot, and hang the decoration on it.
• Macaroni bows painted with golden gouache will look great as decorations.
• You can place a garland inside a round Christmas tree made from cups. It will shine very beautifully through the plastic, and its top light bulb will perfectly replace the traditional star.