What to make a mirror ceiling from. How to make a mirror ceiling with your own hands? Fastening mirror plates

A mirrored ceiling will make any room spectacular. Installing a mirror ceiling is not difficult, and you can do it yourself. However, the decision to install such a ceiling surface must be deliberate, since such coverings are not suitable for every interior. Photos of stretch mirror ceilings will help you make your choice. The mirror on the ceiling is original design solution, capable of radically transforming the interior of a room. It can give special atmosphere and sophistication.

Mirror ceilings: advantages and disadvantages

Their advantages include:

• Mirrors significantly transform a room, making it attractive and cozy.
• Can be combined different kinds material on the ceiling, realizing the original ideas of the designers. For example, mirrors and aluminum structures or wooden slats with glass coverings.
• Such a ceiling visually expands the space, increases its volume and is optimal solution decoration of small rooms.
• A wide range of color shades will please any beauty connoisseur.
• Increased moisture resistance makes it possible to install a mirror ceiling in the kitchen or bathroom.
• Good light reflectivity contributes to uniform illumination of the room. When properly placed on the ceiling lighting fixtures, you can divide the room into zones.
• Installation of mirror structures is carried out quickly, with virtually no debris or dust remaining.
• They are easy to care for using special glass cleaners; they can be washed or wiped with a damp cloth.

Ceiling with mirror inserts photo

Despite the significant advantages, mirrored ceilings also have disadvantages.

Disadvantages include:

• Markedness.
• Fragility.
• High price.

Selecting a mirror finish

You can make a mirror ceiling with your own hands. But first you need to decide on the type of coverage. There are several of them:

• Tensioners . IN in this case installation is carried out using a special PVC film, a high degree of reflection, which is an alternative to real mirrors. However, such material does not convey natural beauty mirrors, therefore more suitable for multi-level structures with illuminated cornices.

PVC ceilings with a mirror effect can be installed in absolutely any room without restrictions. In this case, the installation is carried out according to the installation type of a conventional stretch ceiling.

• have the most high degree reflections, therefore they can visually enlarge the space better than other materials.

Mirror ceiling in the room photo

• with mirror surfaces.

• with adhesive base. The special film with which they are covered on the outside gives a mirror-like appearance to the material.

Such products cannot be installed in rooms with high humidity.

How to make a mirror ceiling with your own hands: features of various methods of installing mirror structures

Due to the fact that it is possible to install a mirrored suspended ceiling indoors different ways, each design has its own fastening features:

Data suspended ceilings are based on the installation of a structure in the shape of the letter “T” and include:

• Suspensions with mechanical adjustment.
• Profiles – guides, transverse and retaining (power).
• Corners with which the system is attached to the wall.

First of all, mark the future ceiling, the base of which will be a horizontal line with an indentation of 10-15 cm from the ceiling surface, drawn along the perimeter of the room. A guide profile and hangers are attached to it. Mechanisms installed in the suspensions allow you to adjust the evenness of the horizontal plane of the ceilings.

Surface marking for Armstrong type mirror ceiling

Transverse and force profiles are attached to the suspensions, recreating the structure of cells. Mirrors in the form of panels are subsequently placed in them.

The advantages of this method include speed of assembly, no need for preliminary preparation of the ceiling, the ability to hide electrical wiring and elements of the communication system.

It is considered a minus small selection color shades.

Mirror ceiling tiles are rolled into rolls for finishing the ceiling. Before attaching the covering to the ceiling, it must be carefully leveled. The roll is unrolled and left to rest for several days on a flat, smooth surface.

It is very easy to install mirror slabs on the ceiling. To do this, the reverse side is coated at the production stage with special compounds that ensure reliable fixation of polystyrene to the ceiling surface.

Before you start decorating, you need to remove the film, then carefully attach the canvas to the ceiling and press it. Remove air bubbles from under the coating with a rubber roller.

Decorating ceiling surfaces in this way requires careful preparation.

This is a combination that uses suspended structure"" type and slabs fixed with glue. The mirror plate is attached to the frame, and the glue ensures its stable position.

This type of mirror ceiling comes in a variety of design solutions.

The disadvantages include the laboriousness of the process.

Such systems are most often used in interior decoration, without requiring additional preparation efforts. A glossy film that reflects light well makes the surface of the ceiling smooth, creating an imitation of a mirror.

The most important thing in this case is to take the correct measurements, since a smaller-sized canvas will be difficult to install, and a coating that is larger than the ceiling will begin to sag over time.

Installation consists of installing a baguette to which, depending on the chosen method, a glossy sheet will be attached. After fixing it to the main structure, it is heated with a gun to 60 degrees. Becoming elastic, the fabric stretches and straightens as it cools.

To prevent the tension force from bending the baguettes, they should be attached to dowel nails in increments of 25-30 cm.

It is mounted from aluminum strips, onto which a mirror coating is applied. Big choice color shades allows you to choose suitable option. In order to highlight the mirror on the ceiling, the color of the plates and slats should be different.

The main feature of this type of design is the installation of the frame in a strict plane. Due to the fact that the slats are susceptible to temperature changes, the frame may bend over time. Therefore, a gap of 3-5 mm must be left between the wall surface and the final beam of the frame.

Slats are subsequently attached to the beams, between which mirror cassette panels are laid.

A mirror on the ceiling in the room will serve as an original one. By combining such coatings with other materials, it will be possible to create exclusive ceiling surfaces.

There is no need to be afraid of difficulties. Mirrored ceilings can be easily installed using materials that do not cause installation problems. But such a ceiling will become the real pride of the owners of the house.

Mirror film for suspended ceilings

Mirror PVC sheets are the best alternative to a real mirror on the ceiling. The use of small inserts or solid mirror sheets on vertical surfaces or as countertops is justified.

But on large surfaces, such as floors and walls, it is much more practical, convenient and reliable to use materials that imitate mirrors, rather than heavy, easily breakable glass. That is why technologies for self-leveling floors and suspended ceilings with a mirror effect are used for horizontal surfaces.

Mirror PVC film for suspended ceilings is surprisingly similar in its reflective properties to a real mirror. Outwardly, it resembles a thin sheet of steel or foil. The Time Sealing company offers mirror cloth very High Quality, made in Germany.

The cost of such a film cannot be called low, but its durability and excellent external properties are worth the money spent. You can buy a mirror ceiling in the two most popular colors: gold (907) and silver (906).

Width mirror film for suspended ceilings - 130 cm, so single-level mirrored ceilings are found only in tiny hallways, narrow corridors, small bathrooms and restrooms.

In all other cases, two-texture or two-tier ceilings are installed. This is explained by the fact that it is impossible to hide the weld on a mirror sheet, so this type of film is not welded. To connect them, special separating profiles are used.

How to make a mirror ceiling yourself (video)

Types of mirror ceilings for the home, methods of their installation. Step-by-step instructions for installing a mirror ceiling with your own hands.

The content of the article:

An extraordinary mirrored ceiling is a great way to highlight the most primitive room from other rooms in an apartment or house. A reflective coating visually enlarges the space, increases the level of lighting, and serves as an excellent decorative element in any interior. Installation of mirror structures does not require special knowledge and skills, so it can be easily done without the help of specialists. A step by step instructions and valuable instructions will help you avoid the most common and unpleasant mistakes.

Types of mirror ceilings

Mirrored ceilings in any form are stylish and extravagant. In order to clearly understand the principle of their installation, it is necessary to consider each type in more detail. Today, the most popular options for mirror finishes are:

1. Stretch reflective ceiling. A system that involves the use of glossy polyvinyl chloride film carefully stretched under the ceiling surface. This type of construction is used in any room, as it is quite resistant to moisture and temperature changes. With the help of stretch mirror ceilings it is easy to create an extraordinary multi-level design that fits any design.
2. Polystyrene boards. Impact-resistant material for floor finishing, provided to consumers in the form of rolls. Mirror ceilings made of polystyrene panels are easy to install, thanks to the versatility and strength of the raw materials, as well as the adhesive base on the reverse side.
3. Classic mirrored ceilings. Ideal design for the level of reflective effect. Glass mirrors are better than others at expanding and illuminating the space, giving the room a sophisticated, rich look. It is recommended to install this type of ceiling only in the Armstrong system, since in another installation option it cannot be called completely safe.

Meanwhile, not all types of mirror ceilings can be installed independently. Tensile structures require a special tool, and ceilings made of a solid mirror slab are best fixed in the company of at least four people.

Features of choosing a mirror ceiling

Choosing the ideal mirror design must take into account many factors. Of course, the taste preferences of the owners play an important role, but far from fundamental. In addition, when determining the type of reflective ceiling, it is worth considering criteria such as:

• Room height. If the room is high enough, the owners can afford any of existing species mirrored ceilings, while for a low room only a beveled system that does not take away precious centimeters can be ideal.
• Color spectrum. The most popular mirror options for stylish ceilings are made in one of three color solutions: silver (almost transparent), graphite (rich steel), bronze (with a subtle golden tint). Today, slabs with applied decorative sandblasting or other elements are also quite popular.
• Mirror parts size. The facet system is characterized by tiles with sides of 40 or 30 cm. Fitting shelves include elements with edges of 31.5 or 39.5 cm. The Armstrong design allows the use of one of two square formats: 29.5 or 59.5 cm.
• Material Specifications. The appearance of the mirror ceiling must necessarily correspond to the microclimatic conditions of the room. Glass structures not suitable for installation in kitchens and bathrooms. Under the influence of condensation, the surface will quickly lose its presentable appearance. At the same time, stretch and polystyrene (most of their types) ceilings can easily withstand extreme conditions and have a long service life.
• Lighting. The choice of a mirror ceiling is also guided by the intended lighting. For big pendant chandeliers or an ultra-modern built-in lighting system, the Armstrong glass ceiling is ideal. With small stylish chandeliers The polystyrene coating goes well together. Small spotlights are often installed in multi-level tension structures.
• Price. The cost of finishing the ceiling surface also plays an important role. When calculating the expected cost, it is necessary to take into account not only the “mirror” material, but also all the necessary hangers, fasteners, solutions, etc.

Methods for installing mirrored ceilings

Almost all methods of installing mirrored ceilings require special care, and in some places even scrupulousness. When working with slabs, mirrors, panels, safety precautions must be observed. All reflective elements must correspond to a certain shape and parameters, and fastenings and adhesive solutions- be fresh and of high quality.

Today there are three main options for implementing mirrored ceilings:

• Adhesive connection. One of the most simple ways installation The tiles are glued onto a cleaned concrete slab, moisture-resistant plywood or drywall. Fastening mirrors to plaster is prohibited.
• Dowel mounting. It's simple and reliable way installations. In small mirror plates, holes are drilled in the corners (through rubber pads), through which the tiles are screwed to the ceiling.
• Installation of polystyrene plates. The material is leveled in advance under the load, kept in the planned room, and only then attached to the ceiling surface with a special adhesive layer. In the absence of such a layer, ordinary PVA glue is used on the reverse side.
• Hanging system. A design that involves the presence of a special prefabricated frame-sheathing, mounted on hangers, and mirror inserts. The advantage of suspended ceilings is the ability to hide any unevenness in the base ceiling, electrical wiring, ventilation shafts and communication networks.

Suspended structure - best option for classic glass mirrors. This type is the safest because it eliminates the possibility of heavy glass panels falling off.

DIY suspended mirror ceiling

The Armstrong tile-cellular ceiling is the most popular among all suspended structures. Among the shortcomings of the system, a loss of at least 25 cm of room height is clearly monitored. But such a minus does not frighten modern owners. Suspended mirror ceilings are increasingly found not only in in public places, but also in private homes. The system breaks any records in terms of ease of installation and low cost. Moreover, it is not necessary to be experienced craftsman or an experienced repairman to create such a stylish and safe mirrored ceiling in your home.

Armstrong mirror ceiling installation

The Armstrong suspended structure involves the presence of several mandatory elements, which include:

1. Plates. Mirror elements can be square (60x60 cm) or rectangular (60x120 cm).
2. Profiles. This hardware with holes for hanging. The wall ones are L-shaped, the rest are T-shaped.
3. Suspension. A pair of rods (with a hook and a straight one) connected by a “butterfly” - a curved leaf spring with holes. Using the “butterfly”, you can adjust the height of the suspensions.
4. Mounting unit. This is a dowel for a self-tapping screw (in the base ceiling).
5. Lamps. Most often, raster or recessed luminaires are used for the Armstrong system.

Surface marking for a mirror ceiling

Installation of Armstrong mirror ceilings begins with marking the ceiling. First, determine the level of the future ceiling. On average, this figure ranges from 25-40 cm from the base. Then, at the measured level, they place marks in several places, check their accuracy with a laser or water level, and draw a solid line around the perimeter of the room. To facilitate the process, you can use a chokeline - a cord smeared with colored chalk.

At the next stage, locations for the location of universal hangers are determined. Since the entire structure has significant weight, the distance between them should not exceed 60 cm. It is equally important to place the structure in such a way that panels of the same size are located on opposite walls.

To do this, use a simple formula. L of the ceiling slab must be divided by L of the mirror panel, then add L of the panel to the remainder of the division and divide by two.

The calculation looks like this:

Rooms - 2745; L panels - 600
2 745: 600 = 4, 575
575 + 600 = 1175
1175: 2 = 587,5

In this case, the last number is the length of the outer panels on both sides. That is, the first guide should be located at this distance from the wall. And each subsequent one is at a distance of 600 mm from the previous one. In the places where the guides are supposed to be, it is necessary to draw straight lines on the ceiling.

Installing a frame for a mirror ceiling

Along the straight lines drawn at the previous stage, technological holes are made every 60 cm. Suspensions are carefully mounted into the resulting holes. To install lighting fixtures, holes are also made and additional hangers are installed in pre-marked places.

The wall corner is attached along the perimeter of the room on a line marked with a chockline with a pitch of 80-90 cm between dowels. It is recommended to drill technological holes directly through the metal corner to avoid additional adjustment. To do this, use a hammer drill with a diameter of 6 and the corresponding dowel-nails.

The main profiles of the frame are mounted on universal hangers, checking with a laser device the correctness in the horizontal plane relative to the wall corners. With the help of butterfly hangers you can always accurately adjust the height of structural elements. Transverse guides are mounted between the main ones with a distance corresponding to the dimensions of the mirror plate (60 or 120 cm).

Installation of raster lamps for a mirror ceiling

For lighting rooms with suspended ceilings raster lamps are often chosen. They ideally complement the structure itself, and are also considered completely safe in cases where a mirror ceiling is installed in the bathroom, kitchen and other rooms with extreme microclimates.

If the frame is completely installed and leveled in a horizontal plane, the stage of installation of electrical appliances begins. Standard raster lamps are produced in a format of 59.5 x 59.5 cm. Almost always, mirror plates for the Armstrong system have the same parameters, which means that the cells are completely suitable for this type of lighting.

The only process that requires special attention during the installation of raster lamps is connecting to the electrical network. For this it is better to use a special terminal block. With its help, it will be possible to avoid heating the wiring and unexpected fire.

Attaching mirror plates to the ceiling

For the Armstrong mirror ceiling, different mirrors are used: standard, darkened, with diamond or sandblasted patterns, etc. By combining several types, you can get an unusual, unique result. Regardless of the option chosen, tiles should always be inserted into the cells with extreme caution. It is better to use safety glasses and gloves during the process to avoid painful cuts.

Since areas near the walls are not always filled with solid mirrors, the slabs will most likely have to be cut. A standard glass cutter can best handle this task. But even this, it would seem, simple work requires special care and adherence to technique. Place the cutting mirror on a flat surface and draw a straight line with a glass cutter. Then, with a sharp movement (at a break), the unnecessary piece is separated. The cut slabs are installed in the corresponding cells near the walls in the same way as the whole ones.

Knowing how to make an Armstrong-type mirror ceiling, you can always change home interior in a matter of hours. To do this, it is enough to replace the reflective panels with any others that suit the design of the room.

How to make a mirror ceiling - watch the video:

Reflective ceiling covering is a stylish, practical and multifunctional solution. Having learned how to install a mirror ceiling with your own hands, any owner can create a real work of art in his home, while saving a significant amount of money.

Making a mirror ceiling with your own hands is not as difficult as it might seem. If you have decided to self-installation mirror ceiling or are just thinking about this possibility, we bring to your attention this article.

In our article: choosing a mirror ceiling, types of mirror ceilings, surface preparation, installation of a mirror ceiling, mirror ceilings photos.

When should you choose a mirror ceiling?

A mirrored ceiling is always an interesting design solution. Such a ceiling can give the room some sophistication and a special atmosphere, and can also serve as a visual expansion space (which is very important if there is not much space). Mirrored ceilings are also good for dark rooms as they can create the illusion of more light. It will transform a mirrored ceiling and a room with a small height; the ceiling will seem higher than it actually is.

Often, not the entire ceiling is made mirrored, but only part of it in the form mirror insert. In this case, the mirror surface mainly serves a decorative function.

Types of mirror ceilings

There are several types of mirror ceilings:

1. Mirror stretch ceiling

To obtain a mirror effect in this type of ceiling, a special polyvinyl chloride film is used. It has a good reflective effect, but still this effect is different from the effect that real mirrors produce. A mirrored stretch ceiling also expands the space, but the reflection in it is not as clear, a little blurry, as if foggy.

The big advantage of mirrored stretch ceilings is that they are suitable for absolutely any room, including wet ones; as well as for any ceiling configuration (including complex multi-level ones).

You can see how such a ceiling looks in a particular room by entering “mirror stretch ceiling photo” into a search engine.

2. Mirror polystyrene plates on adhesive based

Such slabs are produced in rolls. When choosing a mirror cloth of this type, you need to consider whether it is intended for wet areas(if you plan to install it in a bathroom or other wet area).

3. Classic glass mirror ceiling.

Such a ceiling, of course, is the best reflector, so it performs the function of visually expanding the space best.

Installation of mirrored stretch ceilings is most often carried out by employees of the company from which this very ceiling was ordered.

Therefore, let's take a closer look at self-installation glass mirror ceilings and how to make a mirror ceiling yourself from polystyrene plates.

Installation of a mirror ceiling made of polystyrene plates

Before you begin installing this type of mirror ceiling, you need to level the slabs. It is best to do this under a load, so leveling will happen much faster.

WITH reverse side The slabs have a special adhesive layer, so gluing the slabs to the ceiling is quite simple. The boards can be glued either to drywall or directly to plaster.

To prevent air bubbles from remaining under the slabs, it is recommended to use a special rubber roller that can be used to remove them.

Please note that if such a ceiling is installed, you should not use halogen or overly powerful lamps in the built-in lamps, as then the coating may be subject to some deformation.

Polystyrene mirror ceilings, which are priced lower than ceilings made of mirrored glass slabs, are becoming increasingly popular.

Installation of glass mirror ceiling

A mirrored ceiling is most often made from individual square or rectangular tiles. Mirror tiles for the ceiling come in both traditional colors and in other colors. color ranges(pink, blue, golden mirrors).

It is also necessary to prepare places for lamps in the tiles.

Surface preparation

In theory mirror tiles can be installed directly on concrete ceiling. But, as a rule, such a ceiling is not perfectly flat, and the surface under a mirror ceiling must be flat, otherwise the reflection may be incorrectly refracted and, as a result, the overall impression of the ceiling will be spoiled and its advantages will be negated.

Installation of mirror tiles

There are two ways to install mirror tiles: gluing and screwing.

Gluing is done with a special glue, which is applied along the perimeter and diagonals of each tile. The tile with glue applied to it should be pressed to the surface and held for a while; You should take your hand away from it only after making sure that it is already stuck and will not fall.

In case of fastening with screws, it is necessary to carefully drill a hole for the self-tapping screw using a drill in each corner of the tile. Next, a rubber washer is placed on each screw (to avoid damage to the glass surface) and fastened to dowels. Special chrome caps are then installed at the screw fastening points to give the overall surface more aesthetics.

Suspended mirror ceiling

There are also more difficult option- suspended mirror ceiling. In this case, a special suspended structure is made, consisting of metal frame with guides. Then mirrors of the selected size are placed into this structure. The structure must be very durable and securely fastened to withstand the considerable weight of the mirrors.

We bring to your attention a video that clearly shows the process of installing a suspended mirror ceiling.

When installing mirrored ceilings, you should not forget that mirror tiles are quite brittle material and you need to handle it carefully to avoid the hassle of subsequently purchasing additional tiles.

When decorating ceilings today, unexpected and original solutions. One such example would be a mirrored ceiling, which can visually expand the space.

Classic glass slabs on the ceiling are glued or secured with special screws.

Making a mirror ceiling with your own hands is not as difficult as it might seem; there are many installation options. These are unusual but beautiful slatted ceilings, suspended slabs and mirror tiles, which are glued either to the entire surface of the ceiling, or only to a selected part of it.

Options for mirrored ceilings

It is possible to make a mirror ceiling with your own hands. There are several options:

The darker the glossy film, the stronger the “mirror” effect.

1. Can be used tension materials. A special PVC film is used, it has a high reflection effect. Such materials can be used for any room; installation is carried out exactly as for any other stretch ceiling. You can make beautiful ones multi-level structures with cornice lighting.
2. Adhesive-based polystyrene products. Is it roll or slab material, which is based on polystyrene. The outside is covered with a special polyethylene film. This option is not recommended for wet rooms. In addition, the material must not be heated.
3. Slatted ceilings in the form of plastic or metal slats with a mirror surface. Usually these are narrow long panels.
4. Glass classic slabs that can take on different shapes and colors. They are glued to the surface or secured with special screws.

Return to contents

Preparatory work

To make a mirror ceiling with your own hands, you must first prepare the surface for work and select the material for installation.

Preparatory work:

1. First you need to correctly calculate the amount of material. It all depends on the shape of the tiles and the area to which they will be glued. First you need to draw up a diagram showing the location of individual tiles, taking into account their shape. This will make it much easier to calculate the area, taking into account the position of the material on the ceiling surface and the dimensions and shape of each element. First you need to find out the area of ​​each tile, then the entire surface that will be glued. By dividing total area on the value of each tile, you can get the quantity. If the entire surface of the ceiling is to be sewn up, then approximately 5-10% should be left for cutting. The amount of glue is calculated depending on the consumption.
2. Afterwards it is necessary to prepare the ceiling surface for work. It should be even and smooth, whitewash or paint should be carefully removed. Then the plane is carefully inspected; if necessary, all defects are eliminated. Plaster is used for leveling. If the unevenness is strong, then you will have to use drywall to eliminate it. If the mirror ceiling will be used in the kitchen or bathroom, it is necessary to purchase moisture-resistant plasterboard to level the surface.
3. The surface should be treated with a special primer and must be completely dry before finishing.

Return to contents

Installation of mirrored tile ceiling

A mirror ceiling can be made in various ways, but the simplest is the method of gluing tiles to the ceiling.

1. You can only use special glue, which allows you to get the job done quickly and easily.
2. You can install the tiles using special self-tapping screws, the heads of which have decorative surface, i.e. they become a means of design in themselves.

The gluing option is used most often, but it is only suitable for a flat surface. No special experience is required, you just need to prepare the plane. The installation process is as follows:

1. The surface must be treated with a primer, as already mentioned; its layer must dry completely before the tile is glued.
2. The glue is applied to the surface with a spatula; its layer should not be too thick or thin. After application, the glue should dry slightly to improve adhesion.
3. Next, use a spatula to apply glue around the perimeter of each mirror tile. When installing, it must be pressed tightly against the area of ​​the plane with glue.

All connections must be made efficiently, each element must be glued firmly and securely.

Otherwise, the beautiful mirror surface will begin to fall away. It is best to work with gloves to avoid leaving fingerprints. Each element of the coating must be pressed with a special rubber roller.

Needed for work certain materials and tools:

• mirror tiles required form and sizes;
• tile adhesive;
• building level;
• a set of metal spatulas;
• putty;
• starting and finishing primer;
• rubber roller;
• protective gloves.

The appearance of the ceiling is a peculiar business card owners of the house. At the moment, there are many options for its design, but the most unusual and effective design move, which allows you to transform any room and give appearance The room's expressive individuality is the installation of a mirror ceiling. It's no secret that today a large number construction companies They offer their services for decorating the ceiling space, but it is quite possible to install a mirror ceiling with your own hands. A person who has some experience in performing repair work is quite capable of coping with this task.

• The presence of mirrors on the ceiling automatically transforms the design of the room and gives it an attractive and cozy look.
• The ability to combine mirror and aluminum coatings contributes to the creation of original and practical design solutions.
• A mirrored ceiling increases space, so its use is very important in small rooms.
• A wide variety of colors of mirror panels can satisfy the needs of even the most sophisticated connoisseurs of beauty.
• A high degree of moisture resistance allows you to install mirrored ceilings in rooms with high humidity.
• Thanks to good reflective capabilities, the space of rooms with mirrored ceilings is illuminated evenly. If you correctly place artificial light sources in a mirrored ceiling, you can create the effect of zoned lighting, which will give the room a romantic and mysterious look, favorably highlight some interior details and hide others in the twilight.
• Installation of a mirror ceiling occurs quite quickly, and practically no construction debris or dust is generated.
• Caring for a mirrored ceiling surface is limited to periodic dry or wet cleaning, which is carried out using a rag and glass washing liquid.

Methods of their installation

• Stretch mirror ceilings. Canvases made of polyvinyl chloride can create the effect of a mirror-like ceiling covering that is close to natural. The only difference between a mirrored stretch ceiling and a real mirror is the quality of the reflection, which in a mirrored polyvinyl chloride fabric lacks clarity and has slightly blurred contours. It is not recommended to install suspended ceilings yourself, because... To perform these works, theoretical knowledge, practical experience, professional equipment and the ability to work on it are required.
• Mirror polystyrene plates. The finishing material during the production process it is wrapped in tight rolls, which are installation work must be leveled.

There are three ways to straighten the material:

1. Spread the roll in the room and wait until it levels out on its own. In this case, no additional steps are required, but this method requires quite a bit large quantity time.
2. Unwind the roll, twist it in the opposite direction, let it lie in this form for 24 hours. After a day, the roll can be unrolled again - the material should be completely leveled.
3. Spread the roll indoors and place a suitable weight on its surface, which will often completely level the material within a few minutes. This method is recommended for use in case of extreme lack of free time.

It is not difficult to install mirrored polystyrene, because on the back side of the material there is a self-adhesive surface that ensures good adhesion of the material to the ceiling. Preliminary preparation ceiling is a prerequisite, because On a perfectly flat surface, polystyrene boards look most impressive. The surface of the interfloor slab is treated with a spatula, which makes it possible to remove possible irregularities that arise as a result of treating the ceiling with a primer mixture.

If enamel paint was previously applied to the ceiling, which over time for one reason or another began to peel off, it should be completely cleaned off using a spatula or scraper, and only then proceed with the installation of the mirror polystyrene tiles. On plasterboard sheets The slabs are glued just as easily as on a plastered ceiling.

The process of gluing polystyrene plates is as follows:

• The protective film is removed from the sticky layer of material.
• The plate is applied to the ceiling with a self-adhesive surface and pressed against it with force.
• To remove air bubbles, the surface is rolled with a special rubber roller.

Sometimes there is no self-adhesive surface on the material. Then the polystyrene boards are attached to the ceiling using special PVA-based adhesive mixtures.

Be sure to remember that the use of a mirrored polystyrene ceiling excludes the installation of powerful artificial light sources, which can become very hot and deform the finishing material. In rooms with high humidity, you can only use polystyrene boards specially designed for this purpose, which are not afraid of contact with water.

Glass mirror ceilings of the classic type. Benefits of using real mirrors:

1. Maximum expansion internal space premises.
2. High percentage of light reflection.
3. Resistant to high humidity.
4. Possibility of uniform illumination of the room in case of installation of built-in light sources.
5. Quick installation and absence of construction waste and dust.
6. High aesthetics.

Preliminary work

First of all, you need to decide on the shape (square or rectangle), size and color of the mirror plates. After this it is calculated required amount tiles and cutting them.

It is not recommended to cut glass mirror tiles yourself, because to do this work well, you need to have professional equipment and experience working with it. We should not forget that it is necessary to prepare holes for light sources in the tiles in advance.

At the next stage, the ceiling is carefully leveled. Ideally, it is best to use moisture-resistant plasterboard sheets or moisture-resistant plywood for this. Only on a perfectly flat ceiling surface can a glass mirror ceiling demonstrate its advantages in full.

Installation process

Mirror glass slabs can be attached to the ceiling using glue or screws.

In the first case, glue must be treated inner side tiles After this, you need to press it to the ceiling and wait until the tile is securely glued to the ceiling surface.

In the second case, in each of the four corners of the tile you need to drill a hole, the diameter of which depends on the size of the screw. The tips of the screws must be equipped with rubber gaskets that will protect the surface of the glass plates from chips and scratches. When preparatory work are completed, you can begin to attach the slabs to the ceiling. To give the surface additional charm, after completing installation, it is recommended to hide the screw heads with chrome caps.

Working with glass mirror plates requires extreme caution due to the fact that glass is very easily damaged by even minor external loads.

• do-it-yourself bathroom renovation with plastic panels.

Photo

Video

This video is about a suspended mirror ceiling.