DIY modern lamps. How to make a sconce with your own hands from scrap materials

Lamp - an extremely practical item, because unlike a bulky chandelier, it is very compact and can be located anywhere, even on the floor. In the process of creating an interior, it is often forgotten because it plays a secondary role. However, in the setting of a small apartment or room, it will be almost indispensable, and will also help add coziness and warmth to the room. In modern lighting equipment stores you can find a lamp for every taste, but isn’t it more interesting to create it? with my own hands? In this article we will tell you how to make a beautiful and unusual lamp with the help of absolutely ordinary materials, which are in every home.

1. Garland lamp

To create such a lamp you will need a wire base, fishing line, paper or plastic bottles, as well as patience, patience and more patience.

You need to create a frame from wire required form, and cut out circles or figures from paper or bottles. Next, you either simply attach them to the wire itself with glue, or string them on a fishing line. The thinner the line, the more weightless your design will be, so from a distance it will seem that your butterflies are “fluttering” on their own.

2. Lamp made of beads

To create such a product you will need wire and, if desired, fabric. In more simple version you simply string colorful beads onto a wire and bend it randomly. Then a regular light bulb is fixed in the center.

If your soul desires something softer, with an oriental flavor, you can create unusual lampshades made of fabric, decorated with beads. For this, you will need old CDs, to which you will attach both fabric and beads strung on the same wire – an irreplaceable element, stock up on it in abundance!

The fabric should be translucent: organza or tulle will do. It is stitched from one edge and secured only at the top. Then you can string wire with beads onto it. Please note that it is better to choose transparent or “chameleon” beads, otherwise they will look too gloomy when the light bulb is lit. Instead of a light bulb, you can place a flickering New Year's garland inside the lamp: this way you will create a festive atmosphere in the room.

3. Cloud lamp

An incredibly cute and gentle option that is suitable for both children and adults. It may seem that it is quite difficult to perform, but this is not at all the case.

To create it, you only need a paper “Japanese” lantern, cotton wool and a lot of glue. Vata in large quantities glued onto the flashlight to create a lush lump. Additionally, it can be decorated with pendants in the form of stars, crescents or raindrops. That's all, actually.

It’s better if the cloud is held on a thin line, - this way you will create a weightless effect in the room. This great idea for a themed party, so grab some cotton wool and get going!

4. Lamp-lock

This solution is suitable for those who, as a child, loved to cut out pictures from magazines. A surprisingly simple lamp that will create a mysterious, almost mystical atmosphere in the room.

You will need to find a photograph (or print a picture) of an ancient castle, carefully cut it out and roll it into a kind of tube. Then secure the structure with tape and place a small light bulb inside. On dark evenings, your castle will be illuminated from the inside, and mysterious shadows will flicker against its background... well, how can you not tell a scary fairy tale? You can also cut out “windows” in the castle through which light will pour out.

5. Lamp made from old things

Old dishes, pieces of furniture and even old, shabby lamps are found in every home. It's good that you didn't throw them away, because now they will function again, you just need to decide on the style. In some cases, you don't even have to decorate anything, you just need to place the lamp (or what's left of it) in a suitable environment.

Most often, the matter is limited to a drill or glue with a death grip. Such lamps can be placed in any part of the apartment, the main thing is to observe the general compatibility.

And a few final tips:

1. Use only energy-saving light bulbs in lamps! You don't want to see flames Are you in the place where your beautiful creation was just?

2. Make sure that the material you choose does not hide the light – after all, first of all, the lamp should illuminate and only then decorate the room.

3. Don't be afraid to experiment, you will succeed! Who knows, maybe there might be a decorative designer dormant in you? It's time to wake him up!

Photo: homedit.com, millax.com, museum-design.ru, idejnik.ru, reduktor-union.ru, happy-giraffe.ru, magdekor.ru, secondstreet.ru, decorateme.com

In this article we offer step-by-step master classes on how to make it yourself desk lamp from improvised means that are always in the house. It would seem at first glance ordinary and unnecessary things, but from them you can make original and designer lamps for the desktop.

The most popular and simple materials at hand are: glass bottles and jars, cardboard and paper, plastic vessels, water pipes and cement. We will show and tell you how to make lamps from this in this article.

With a simple and elegant copper table lamp, you can decorate any corner of your home by making it yourself. It will fit perfectly into a modern interior from loft to rustic style. Prostate and laconicism are the main trump cards of this table lamp.

To do this you will need the following tools:

• Roulette, marker
• Pipe cutter and washcloth
• Wire stripping and stripping tool
• Pliers and a thin flathead screwdriver
• crosshead screwdriver

M materials:

• Copper pipes
• Acetone and super glue
• Copper corners 90°, 7 pcs.
• Electric wire
• Plug and Electric socket
• Switch and light bulb

Technique for assembling a table lamp

To begin, take a tape measure, a marker, a pipe cutter, a rag, copper pipes and acetone.

Mark and cut the tubes

• Use a measuring tape and marker to mark where you will cut the copper pipes.
• Do this carefully, measuring every millimeter precisely, because if the parts differ, then the end result will not be the same size as they should be.

• Guide the pipe cutter and adjust the diameter of the pipe using the nut. Look along the copper tube, gradually readjust the diameter with the nut, so that the closure continues until the pipe is cut.
• Then, using acetone and a rag, you can wipe the markings off the pipe.

TIP: Our parts have: 3 cuts of 15 cm, 1 cut of 20 cm, 1 cut of 45 cm, 1 cut of 25 cm. We used 12 tubes. When designing your light fixture, please note that the copper elbow size will be added.

While the cable is inside, we connect the parts

Insert the parts together and glue super glue. In order to avoid problems in the future, it is better to glue each part and place it next to each other.

Even though the glue works instantly, you may want to wait a few minutes before proceeding to ensure that the pieces are glued together perfectly.

Tip: It will be more convenient to apply glue if you use a brush. If you want the cover to be at the very top, install it first. This way the first part will be ready, and the cable will go in a different direction.

Tools:

• Wire Stripper and Wire Stripper
• Incisors
• thin flat screwdriver
• crosshead screwdriver

Materials:

• fork
• electro chuck
• switch
• Copper pipes
• electrical wire

Install the electrical system

1. Open the front panel of the cover and start by stripping the insulation. Connect the ground ( Blue colour) and phase (brown, gray or black) using the two screws you will find inside.
2. Repeat the same process on the plug and switch.
3. In the switch you will find two pairs of small screws, a cable that you must cut to the height you want the switch to be and connect to the corresponding sockets going inside the small screws.
4. All you have to do is screw in the light bulb to create your copper table lamp.

Finally, place the lamp in a corner or place you like and see how it will become a wonderful addition to your interior, lighting up the space!

Master class: Table lampfrom paper

When I first saw the Robert Delta table lamp, it was love at first sight! The shape is amazing, it comes in a variety of bright colors, just the way I like it. I was recently wondering since the accessories were surprisingly durable, why not use them for a lamp?

Here are all the materials used:

• old lantern or lamp kit
• template and thick cardboard or paper, you can take polypropylene sheets
• glue and putty
• sanding block (medium + fine)
• wood block (add weight to base)

Tools:

• art tapes
• metal ruler/xacto knife
• drill (can optionally replace xacto knife)

Lamp manufacturing technology

• Firstly, print the template (6 pieces of each triangle) (1 of each hexagon).
• Cut out the shapes so that they fit snugly on the board. Then use glue to attach the pieces to the back of the mat.
• With help metal ruler and Xacto knife on cutting board, cut each shape.
• Put them together.

• Next, glue the bottom (shapes 2 + 4) to the base (shape 6). The triangles fit together nicely and if you did everything right they will just fall into place.

Then use small pieces of art tape to attach them together and wait for the glue to dry completely.

TIP: Use super glue, it dries instantly (we used Aleene). Apply glue lightly, and wipe off excess.

1. After gluing the bottom half (shapes 2 + 4 to the base, turn mold 6 upside down (open end down), place the square on flat surface and let it dry overnight, this will help maintain its area.
2. The next day, start working on top part lamps. Glue the shape 1 + 3, leaving a little hole to insert the lamp inside. The top one (form 5) was glued together with artistic tape, but it is not yet glued to form 1 + 3.
3. Then reinforce the seams with glue on the inside.

Then start working on the base of the lamp.

The level at the bottom of the lamp needs to be made a little bigger, so cut some 1×4s to raise it a little. It will also add extra weight, giving it more stability. Use screws to attach the 1×4 to the existing metal base. (We swapped the existing rod with one from another lamp to get it to the correct height).

Next, drill a hole for the cord and insert a plastic sleeve from an old lamp. The lamp should be disassembled, and the cord and wire should be pulled through the threaded rod of the hole in the new base. Inside the lamp, glue it in the center.

At the top (shape 5), mark the center and drill a hole for the center rod. Then glue it in place.

1. After applying the adhesive, remove excess, and if necessary, lightly, and apply a second layer after sanding.
2. Using a medium-grit putty and fine sandpaper, finish with a sanding block. At this point, you will notice its strong base.

Once you've finished removing dust, apply paint! To cover the top of the threaded rod, use the top of an old lamp - it just slides over the rod. Then return it back to the nest!

That's it, your handmade table lamp is ready.

Bottle table lamp

Tin can lamp

This lamp is perfect for a home desk, both for students and schoolchildren. Boys will especially appreciate it; it looks more like a transformer and a robot from the future. You can paint or decorate the jar itself with paper, thread, or make it more embossed. How correct.

Table lamp made from plastic bottles

Plastic bottles can always be found around the household, so decorating an old table lamp is not difficult. Usually, when restoring old lamps, the bases are left and plastic is used for the lampshade. The lampshade mount is usually used as an old one. When working with plastic bottles, remember that they are easier to cut paper knife or construction knife. Glue is used for rubber or special glue for plastic.

Table lamp made of branches and slices

Wood in the interior is always a classic - it is always fashionable and relevant. By decorating a table lamp with a cut of wood or an old piece of driftwood with your own hands, you will get a designer item that simply has no price.

1. To do this, we need to select any piece of wood we like, process it correctly namely, dry it, apply impregnation against pests and cover it with varnish.
2. The second stage is to mount the top of an old floor lamp into the base. If this is not the case, it doesn’t matter; light supply stores usually sell bases for lampshades.

Other original ideas

The basis for a table lamp can be, in principle, any item you don’t need: these are children’s toys, Sewing machines, unnecessary socks and so on. Experiment and create beauty!

A DIY table lamp is one of the most available ways decorate the interior and give it individuality. As long as professional and amateur designers don’t mock them! The reason is simple: in relation to functionality and capabilities creative self-expression In addition to the required costs of materials, labor and skill, a table lamp remains firmly among the top leaders among household items. In this article, we’ll see what you can do with it without particularly straining your hands or wallet. Just a fiction.

Which one should I do?

Rack-mounted table lamps (item 1 in the next figure) illuminate the work area, which does not require prompt movement of the light spot across the table surface: dressing table, desk. Possibilities decorative design in this case the largest. Technically, the design of a table lamp on a stand is the simplest. There are practically no possibilities for quickly adjusting the size of the illuminated area. Light adjustment working area is possible if there is a thyristor voltage regulator in the lamp, but the spectrum of emitted light changes significantly.

The great advantage of rack-mounted table lamps is the ability to obtain relatively by simple means so-called cosecant-square radiation pattern (DP) of the illuminator, see also at the end. A cosecant square pattern provides almost uniform illumination of the working area within a certain angle φ (see figure on the right), which sharply reduces fatigue from intense intellectual work.

Lamps on a breakable hinged bracket (item 2) are more suitable for technical creativity. Lamps on a pantograph bracket at home are impractical and technologically complex, and making a lamp on a flexible bracket at home will cost more than buying a ready-made one.

The design of a table lamp on a breakable bracket is limited to laconic and utilitarian forms. The design is more complex than that of a lamp on a stand, primarily due to the requirement for electrical safety, see below. The possibilities for quickly adjusting the light in the work area are wide both in terms of the size of the illuminated area and its illumination with a constant spectrum.

Console table lamps (item 3) are less common in everyday life, because for stability they require a heavy base and, most often, a counterweight, which complicates and increases the cost of the design. There are fewer possibilities for quickly adjusting the light in the work area for console lamps than for lamps on brackets, but it is possible to obtain a cosecant square pattern.

Table lamps without raising the light source above the supporting surface are no longer table lamps, but night lights (item 4). The fundamental difference between both is that the night light does not have a working area with certain light requirements. Accordingly, the light from a night light can be whatever you want, as long as it doesn’t harm your health.

Design

A trace can be identified in any type of table lamp. design elements:

• Electromechanical – ensures the stability of the lamp and the safe supply of power to the lamp socket.
• Support – supports the illuminator or reflector and, possibly, allows you to change its position.
• Illuminator - an electric light bulb in a lampshade or reflector.

Electromechanics play a role in the design of a table lamp only insofar as it can be hidden in the lamp support. The design touches come in the form of support and illuminator. In stand-mount lamps, as a rule, the main aesthetic load is carried by the lampshade, and the stand complements it; in hinged ones it’s the other way around. But there are plenty of exceptions to this rule.

Electromechanics

The electrical circuit of a table lamp is simple: power plug, cable, switch, light bulb socket. Sometimes a voltage regulator is added. An E27 pendant lamp socket (for a lamp base of a regular width, item 1 in the figure) can only be mounted on an M10 or M12 threaded shank. The cartridge for a narrow E14 mignon base is also attached to a thread or to a lamella in the form of a steel strip; the socket for it is shown by a green arrow in pos. 2. For a table lamp, chandelier sockets (item 3) with screw-on threaded flanges are best suited: between them you can clamp a steel faceplate with a lampshade frame or a clamp for mounting on a hinge. Drawings of the E27 electric chandelier socket of various modifications are given in pos. 4.

It is necessary to make a table lamp in such a way as to ensure its electrical safety. This is especially true for hinged and console lamps. Making your desk lamp safe is quite simple:

1. The cable must be round and double insulated.
2. The conductive cores of the cable are flexible, made of many wires. Core cross-section from 0.35 sq. mm.
3. Places where cables are routed through conductive or damp-prone structural parts must be protected with sufficiently strong flexible dielectric bushings, cuffs or elbows.
4. The cable inside the lamp structure should not be strained.

The diagram of the mechanical part of the support with a weight of a homemade rack-mount table lamp is shown in the figure:

Before insertion, the cable from the inside (highlighted in color) is tied in a knot or pulled through the holes of the dielectric fixing washer so that by pulling it from the outside, the cable cannot be torn inside. Decorative finishing made of polymer clay (plastic, cold porcelain) on a block of trimmed plastic bottle- the best option at home, but, of course, only one of many. If you want, for example, to carve the decorative shell of a stand out of wood, please, as long as it fits properly on the mechanics. However polymer clay as a material for a table lamp stand, it allows you to realize the most original ideas for its decor and fully satisfies safety requirements: dried polymer clay is a mechanically strong, non-wetting, non-flammable dielectric.

Original supports

It is not necessary to fence the support of a rack table lamp, which is quite complex and requires turning work, if its lampshade is light, for example. made of thread (see below) or thin hard plastic, and it is not intended to place a light controller or other electronics in the support. In this case, a fairly stable lamp support is obtained from a “pot-bellied” glass bottle with wide bottom, pos. 1 in Fig. A narrow bottle can be made heavier by throwing pebbles (item 2), steel balls, etc. into it. The lampshade holder is secured to the neck with a standard threaded plug or a piece of hard EPS polystyrene foam, ground into the neck thread.

The hole for the cable in the bottle is drilled with a tubular thin-walled diamond drill. But glass is not at all the same as tile, so you need to drill it like this:

• The bottle is placed on its side and secured securely.
• A plasticine side 2-3 cm high is molded around the future hole.
• Water is poured into the resulting hole.
• They drill under a layer of water at no less than 2500 rpm with the most gentle and smooth feed.

How to make a table lamp from a Jack Daniels whiskey bottle, see the video below:

Video: DIY bottle table lamp

Such a lamp will organically fit into steampunk and other technogenic-utilitarian styles. Just don't make the mistake of trying to make it a lampshade out of flower pot or any other utensils. Technogenic-utilitarian styles are not a meaningless pile of rubbish; their concepts are clearly thought out. Interior elements for them should be related to industrial, and not agricultural or food production. A lampshade, for example, is needed from a tin reflector from an old production pendant lamp on a pantograph, a car headlight, a small spotlight, etc.

In Fig. shown on the right is still very original version the supports of a “real big” table lamp are made of... rope! It is done this way:

1. The rope is taken from natural organic braid 6+1, i.e. 1 strand along the axis and 6 around the circumference;
2. A section of rope is stretched by hand and loosened, simultaneously turning in different directions against the direction of twisting of the strands;
3. The axial strand is carefully pulled out and a thin-walled one is inserted instead. copper tube with a fishing line threaded into it for tightening the cable;
4. The rope with the tube inside is pulled together by turning the hands in the direction of twisting the strands;
5. The ends of the rope are firmly secured to the tube by winding with a cord;
6. Tighten the cable into the tube;
7. The workpiece is bent and knitted in a knot. You need to bend it little by little, carefully, so that the tube does not break;
8. The rope is tightened once again, picking up the wrinkled strands, and soaked acrylic varnish.

Note: the tube should be taken for air conditioning systems, made of oxygen-free copper. The red copper gas or electrical pipe in the assembly will probably break.

Hinge Features

The mechanical part of a table lamp with an articulated arm is more complex. The lamp shown on the left in the figure does not meet the electrical and fire safety: The cable is caught in flammable parts and may become strained when handling the light. Its hanging loop can be caught in the semi-darkness by a hand or a sharp object.

The cable to the light bulb socket in a table lamp on a hinged bracket should be routed along dielectric fireproof elbows either between the sidewalls of its links, or, if the hinge link is solid, along its top, in the center and on the right in Fig. In this case, the cable must be secured to the hinge link. If the hinge links are tubular, the cable is routed inside them. In any case, Ω-shaped cable loops with a diameter of 60 mm or more, but not less than 12 cable diameters, are made over the kinks of the hinge links. At the cable transition from the bracket to the illuminator, an Ω-loop is made from 90 mm, but not less than 20 cable diameters.

The balance of a table lamp on a hinge varies widely and it is quite difficult to ensure its stability with a weight. Because of this, manufacturers sometimes come up with such systems that it is easier to shine a flashlight than to adjust the light from such a miracle, see fig. left. Therefore, table lamps on hinges are often equipped with screw terminals.

A small carpenter's clamp is excellent as a screw clamp for attaching a homemade table lamp to a tabletop, see fig. on right. Better than a lamp clip from a furniture store: it costs less and holds more securely. The grip of the clamp is wider, and the lamp can be attached to a tabletop of any conceivable and inconceivable thickness. You need to ask the carpentry shop, because... jaws of metalwork clamps without a soft coating.

A clamp is converted into a lamp holder using a socket made of a steel tube with an internal diameter of 10 mm and a length of 120-150 mm. The tube contains approx. A longitudinal cut is made halfway along the length, with a width equal to the thickness of the clamp holder. The socket is attached to the clamp with through bolts. A steel pin with an eye, which is a fixed link in the lower hinge of the lamp bracket, is inserted tightly, but not tightly, into the socket. Hooks for hanging chandeliers with the end bent into a ring are good here; the thread does not prevent them from turning smoothly in the socket.

When adapting a clamp to a lamp holder, you need to remember that its holder is made of highly carbonized steel; This is so that the jaws of the clamp do not give way under the back pressure of the compressed parts. High-carbon steel is very hard and quite brittle, so you need to drill it with a carbide drill at 800-900 rpm with a gentle, smooth feed. Do not hit with hard objects or try to bend the clamp clamp!

Illuminator

This desk lamp assembly should provide the correct light to the work area and is often the main decorative element. Here you should first of all note that compact, lightweight and economical LED illuminators (see figure) only shine well in 3D models. In reality, their light is still far from satisfying the medical and sanitary requirements for local work lighting.

Reflectors

The illuminators of table lamps on a hinge are made to be reflective; the lampshade for them is too bulky and heavy. The reflector needs to be selected parabolic; it gives a fairly concentrated and even light. You can make a single conical reflector yourself, but the light from it is uneven, tiring for the eyes, and a lot of it is wasted “scattered” to the sides. Reflectors of good articulated table lamps are made with a reflective surface of the 4th order of curvature (for example, “Hobby”, which has not lost popularity for more than 20 years), but it is unrealistic to build one yourself.

The solution, if a suitable reflector is not available, is to use a krypton incandescent lamp with an internal reflector; conscientious manufacturers also have it of the 4th order of curvature. In this case, the manufacture of the illuminator comes down to installing a shell of any shape around the light bulb from any sufficiently strong and lightweight material, protecting the lamp from accidental impacts.

The reflector of a table lamp illuminator on an articulated bracket must have an opening or holes at the top for the exit of heated air. Fluorescent energy-saving lamps and LED lamps seem to heat up weakly, but being in a heated air cushion reduces their service life sharply, and they are not cheap.

Shade

The illuminators of rack table lamps are made in the form of a light bulb. Its purpose is not only to be a fertile field for decoration, but also to be a partially translucent reflector, providing the required illumination of the working area of ​​a given size. The lampshade for a table lamp can be made hard frameless or soft with a frame. The frame of the lampshade is most often made of wire in the form of a truncated straight cone, on the left in the figure, with simple (in the center) and complex (on the right) curvilinear elements.

The simplest way to cover a straight conical lampshade is with pieces of tape. It is labor-intensive, but the good thing is that the outer surface turns out smoothly curved, without breaks. The seams on the rims of the lampshade are masked with ruffles (item 1 in the next figure), braid, fringe, etc.

There is no point in cutting the fabric in the form of a truncated cone to cover a conical lampshade, because... As a result of tightening the material, the lampshade will not be conical, but faceted, pyramidal. It will be easier to sew a lampshade cover from wedges, the patterns of which are built step by step without using any geometry:

• A sheet of thin cardboard or thick, rigid paper is placed on the frame section;
• Cardboard/paper is attached to the frame with an elastic band or tape;
• The outline of the pattern is drawn from the inside, this will give the lack of fabric necessary for tightly covering the lampshade;
• The fabric is taken from satin, twill or staple weave;
• Cut so that the warp threads of the fabric are oriented along the longitudinal axis of the pattern.

The finished lampshade is often decorated with rosettes, bows, etc. For such a case, there is an interesting design technique: the main fabric is thin, highly translucent, colorful, and the rosettes are sewn in pale pastel colors or very light ones, pos. 2. In the light, the lamp stands modestly in the interior, but when turned on in the dark, everything lights up.

How to cover a lampshade

On a lampshade frame with complex curved ribs (with a “waist”) sewn cover you can simply throw it on and tighten it with ribbons (item 3), thread, or elastic band. But according to the rules, covering a lampshade with fabric is done like this:

How about in a different way?

There are other ways to make a table lamp shade, allowing you to embody a variety of original design ideas in the material. For example, a dummy mandrel is glued from ordinary writing paper (item 1 in the figure) and impregnated twice with acrylic varnish. After the varnish has dried, lanolin is rubbed into the block several times until it stops being absorbed. The lanolin-coated blank is wrapped with a thread pulled through PVA glue, as when making Christmas tree decorations with your own hands. A device for pulling thread through PVA is shown in Fig. lower right. The finished hard lampshade cover is fixed with drops of glue onto the frame, which in this case can only consist of the lower rim, fastening ties and a faceplate for the luster socket.

A rigid seamless lampshade made of thin synthetic fabric is made on the same block. A cut cut like the development of a truncated cone (with an allowance) is used to wrap the block. The fabric is fixed at the edges with paper clips and impregnated with acrylic varnish with a wide stripe in the middle. When the varnish is dry, remove the staples and saturate the edges from the outside. The paper is torn out from the dried lampshade. The inside of the cuffs is trimmed, a thick fishing line is inserted into the bends and secured with drops of glue.

A frame with curved ribs can be braided horizontally with strips of fabric (item 3) or a narrow ribbon, newspaper tubes, straws, etc. For lighting technology, ordinary propylene twine is excellent, but its aesthetics are... not that great... Finally, a soft textile cover for the lampshade can be sewn with a simple straight sleeve along the diameter of the lower rim, and gathered at the top, pos. 4.

Quite original

The following 3 table lamp shade options are outwardly extravagant, but provide very good lighting performance. Which, by the way, cannot be said about many homemade textile lampshades. For example, we buy (stealing is a sin, as Captain Barbosa from Pirates of the Caribbean would say) a milky plastic lampshade for street lamp. Not that expensive, ideal light transmission with light diffusion, and does not break. And below there is a wide opening through which enough light will come out for local working lighting. We decorate the outer surface of the lampshade with decoupage on a transparent basis or paint it by hand. What happens in the end - see in fig. But this, of course, is an option for an amateur who is resistant to psychedelic influences.

A plywood or board lampshade with glue (see next figure) due to internal reflections has good light transmission and greatly softens the light. You can even put an LED light bulb with a frosted bulb into a table lamp with it. Rims - embroidery hoops different diameters. In the same way, you can make a table lamp integrated with a lampshade (on the right in the figure). It will take up a lot of space on the table, but it looks original, “ecologically”, and the light produces a very soft, non-tiring light.

A table lamp integrated with a lampshade can also be made from the same wonderful material -; in a thin layer it is translucent. The jellyfish lamp (see picture on the right) is made from it. The manufacturing procedure is as follows:

Green lamp

Look through old photos of Lenin, Stalin, Churchill, Roosevelt, Theodore or Franklin Delano, Mahatma Gandhi. Or, if you like, with Hitler, Mussolini, General Tojiyo, Chiang Kai-shek. And check out their table lamps. Really, they look like the one on the left in the picture? Which in the USSR was not sold to “the general population”? And which gave birth to the catchphrase “green lamp”?

“Green” luxury table lamps, antique and modern

“Green Lamps” are still produced and sell out well. True, judging by the prices (on the right in the figure), they have not become more accessible to ordinary citizens. The secret of the “green lamp” is in the lampshade made of green glass painted in the mixture, coated on the inside with a translucent (more precisely, 3/4 transparent) layer. The shape of the lampshade corresponds to a very specific mathematical law. Within a wide range, approx. 3 lampshade diameters, the working area of ​​the “green lamp” pattern is almost cosecant-square, and then its illumination very smoothly turns into a greenish twilight. He slightly raised his gaze from the papers - his eyes and mind were resting.

Every person wants to decorate their home decorative items. This brings something lively and completely unconventional to the interior of the house. This transformation also affects lighting, lighting fixtures made by yourself - this is an excellent option to transform your life. This article will tell you how to make a lamp with your own hands.

There are countless ideas, this applies to both the design itself and its appearance. This could be a floor lamp or a chandelier shade, or even a table lamp.

Materials

It is worth paying attention to safety precautions and using non-flammable materials. You should not use paper, plastic and similar materials that have a fairly low combustion temperature.

As for the lamps themselves, it is worth using LED bulbs, since they have many advantages such as a long service life and are not subject to overheating. It also has several shades and, of course, saves energy.

Ideas for lamps

Recently, it has become fashionable to create interesting lighting fixtures made from completely useless materials, a striking example of this are lamps made from empty glass bottles.

There are countless ideas, however, if you have a desire to do something similar, but the idea is not ripe, then you can look on the Internet for photos of lamps made by yourself.

The simplest and effective way to make original lighting, it will be to create a lamp from an ordinary glass jar with screw cap.

Place the jar in hot water in which to dilute detergent, in order to clean it from labels and dirt. The next thing you need to do is drill a hole for the base. Now you need to insert the base into the cover and secure it.

The main thing is not to forget to solder the wire with a 220V plug, otherwise you will not have a power source. Finally, screw in the light bulb and screw on the lid of the jar. Done, now you have a very simple lighting device that stands out from the general concept of classic everyday life.

By the way, you can decorate the jar with painted engravings or a knitted thread pattern. It's very original and nice solution For example, you can make a lamp with a knitted pattern in the shape of a flower.

Wooden lamps

This type of lighting fixture is completely different from simple designs. After all, a lamp made of wooden driftwood will look truly extraordinary. However, the work requires more time and care when handling tools and materials.

But at the same time, almost anyone can do this kind of work. And wood can be found in forest plantations. The technology is quite simple; you need to clean the wood and sand it with sandpaper.

Now drill holes for the wiring in the necessary places, but this must be done where the wood piece will be installed closest to the ceiling. For greater effect, you can make small grooves in the wood where the wiring will be installed.

After laying the wiring, part of the wood with the wire can be puttied, and after waiting for the putty to dry completely, sand these places and open the entire driftwood with colorless varnish.

All that remains is to install this lamp. Of course, after the work done, the skill and understanding of this will appear, and now, with a high degree of probability, you will be able to repair the lamp yourself.

Lamp made of planks

Not everyone is satisfied with a spotlight, but you can assemble structures from scrap materials. When working with wood, in particular with boards, there are often scraps left over, and even they can be used. You can make an excellent decorative lamp from them.

The best thing about this design is that you don't need to use nails. To create such a lighting device, you need 17 planks that will be the same size.

Now, each plank needs to be shaped into a wedge and a base is made where the cartridge needs to be installed. The next thing, using a drill, we will make a pair of holes in the base for each plank and, accordingly, in the blanks.

Let's take wooden pins and fasten the structure. This lamp is very easy to make and looks very impressive.

If these ideas do not suit you, then online you can special effort find master classes on making a lamp in video format.

Photos of DIY lamps

Making decorative items yourself is a creative and interesting process. Not at all difficult to make Wall lights with their own hands, which can beautifully complement the interior of the room, giving it, in addition to additional lighting, comfort and home warmth. The convenience of making such crafts also lies in the fact that it does not require large material costs for the purchase of material. So, do, for example, wall sconce You can do it yourself, even using improvised means that can be found in every home. In our article we will look at examples of independent design of wall lighting fixtures with examples of photos of finished samples.

DIY wall lamps: what you need to make

In order to make a sconce with your own hands, you need tools, a base, an electrical wiring system with a base and a bulb, and materials for the lampshade.

As for the tools, we will not list a huge number of everything that may be needed in one case or another, but we will only say about the main ones that will be useful in one way or another, namely:
stationery (pencil, rulers, eraser, possibly a compass);

• roulette;
• jigsaw or fine file;
• a drill with drills to install a wall sconce with your own hands;
• a heated glue gun (it glues a variety of materials much more firmly than any other);
• scissors;
• paint or colored spray can.

DIY wall lamp: making a frame

The basis for the lamp will be a round or square board cut from an MDF sheet. It should have the dimensions of the future sconce with your own hands (photos are presented in the article). It is also necessary to make slots in the base for installing light bulb sockets. Their number will depend on how bright the lighting should be. When making slits, be sure to take into account the thickness of the bulbs in order to correctly calculate the distance between them.

It is also necessary to cut out the sidewalls for the perimeter of the base, and make a small gap in the bottom of them in order to pass the electrical wire. The sides are fastened with self-tapping screws, the places of the caps are covered with putty. It is advisable to use sandpaper to ensure even grouting.
DIY wall lamps can include color design. The entire frame can be initially coated with a primer, which will ensure a long service life and painted in the desired color.

Fasteners or hooks are installed on the back of the side parts, with the help of which the lamp will be mounted to the wall.

We equip the lamp on the wall with our own hands with electrical wiring

For electricity supply equipment, you will need a power cord with a plug and a switch (you may have to buy it or use one left over from a non-working lamp). The socket can also be removed from obsolete lighting fixtures.

DIY wall lamps, or more precisely, their lampshades, are often made of flammable materials such as fabrics, paper, threads, etc. In order to avoid fire, it is worth using energy-saving fluorescent light bulbs, which have high luminous efficiency with low heating.

Light bulbs with sockets are attached to the finished frame, the wire is routed through the equipped hole. At this point, we can assume that the DIY wall lamp is half ready. Now it’s time to start making the lampshade.

DIY lampshade for sconces from scrap materials

There are many methods using materials such as wood (various twigs), fabrics, threads, etc. It is imperative to have a wire that can hold its shape well for a long time, but at the same time bend well.

DIY wooden wall lamp

After pruning large trees, various branches and snags remain, which can be successfully used to decorate wall lamps with your own hands. The photos show how a seemingly ordinary piece of driftwood turned into an elegant sconce. To do this, all I had to do was cut and sand the points, and make a hole inside for the electrical wire.

Another way to make a spectacular sconce from wood with your own hands is to decorate it with twigs grapevine, arranging them in different sequences. This lamp will become a real decoration for a room in eco style.

Beautiful DIY wall lamps (photos below) can be made from wicker. They can be made different ways weaving, but for beginners it’s worth starting with simple designs.

DIY sconce with thread lampshade

It is quite easy to make such a lamp for the wall with your own hands. To do this, you need to have a thick thread of any color (you can take white and paint the finished structure in the required color), PVA glue and balloon. The technology is very simple. First of all, we inflate the ball to the size that the lampshade should have and tie it tightly. We first soak the threads in glue, and then, having attached the tip to the base, we begin to wrap them around the ball in a chaotic manner. The winding density can be anything, it all depends on how bright the lighting should be emitted by the DIY wall sconce.

Having finished the winding, you can once again coat the entire workpiece with glue with a brush and hang it to dry. We remove the ball from the completely dried workpiece - to do this, it must first be burst. The lampshade is ready. If necessary, it can be painted in any color using spray paint. It is noteworthy that with such a do-it-yourself sconce (photos are presented in the article) you can emphasize any interior style, depending on the color of the lampshade: white will suit minimalism, black will highlight high-tech, bright yellow or red will complement modernism, etc.