DIY mobile phone stand. DIY phone stand: how to make it from paper, wood

You can make a small phone stand with your own hands from the most simple materials. Our small master class will help you in your work. Handmade things bring warmth and comfort to your home.

This funny cat phone stand is easy to make in one evening. To do this, we will need fabric from old jeans to trim the cup, denim or any other fabric for the head, legs and tail.

To work you will need:

1. Denim (stripes of different colors).
2. A piece of bright fabric for a scarf.
3. A little padding polyester or cotton wool for the paws, tail and head.
4. A glass of cotton swabs.
5. Cardboard for the bottom.
6. 4 buttons.
7. Pencil, scissors, needle.

Let's get started:

Take a piece of paper and draw a pattern by hand. It's pretty simple, even if you don't know how to draw. You can do the head like this: circle the bottom of your glass from under the cotton swabs and step back a little from the edge. You will get the head of a cat. Cut out the pattern from paper. We will cut according to it:

• Head (with ears) – 2 parts,
• paw-hand - 4 parts,
• paw-leg – 4 parts,
• tail – 2 parts.

We select materials:

This is the box you need to take for work, it’s just the perfect size:

Next, we will make the bottoms for our stand. In this chopstick cup, the bottom diameter is 8 cm. Yours may be different. For the outer bottom, cut out a larger circle of cardboard, and for the inner one, 0.5 cm smaller than the bottom of the glass from under the chopsticks. We cut out a circle with a diameter of 7.5 cm from denim fabric. We sew it along the edge with thread, insert cardboard and tighten the thread. The second circle is 1.5 cm larger, cut out of denim.

For the inside of the stand we take suitable fabric size 12 cm (height of the glass + allowances on each side of 2 cm) * 27 cm (circumference length + allowances of 1 cm). Sew the fabric along the short side. We trim the allowances at the bottom of the resulting lining in several places. We put the inner lining into the cup, distribute the notched allowances so that there are no large folds. You can drop a little glue so that the lining does not “walk.”

Turn the top allowance inside out outside stands. We also secure it by dripping glue in a circle. If glue is not available, use tape. Then we need to design the cat's belly. Scraps from pant legs work well for tops and bottoms. Lay out the strips and fasten them with pins.

Sew all the pieces along the short side. We put everything we sewed on our stand. On top of the cup we sew the lining and the top of the product with a hidden seam. Then we sew on the large bottom. Make sure it does not protrude beyond the diameter of the glass. If the bottom is large, trim off the excess cardboard.

Place the cat pattern on the fabric from which you decided to sew it. Cut out the pattern from paper and pin it to the fabric. Cut it out, adding a seam allowance of 0.5 cm.

Embroider the cat's face the way you like. You can sew beads or buttons instead of eyes.

We sew the paws, tail and head, leaving small gaps in the seams for stuffing with padding polyester. We turn out the details of the head, paws, and tail. We stuff the blanks with padding polyester or cotton wool.

Sew the paws, head and tail to the stand. The paws are sewn on at the top and secured with buttons.

We sew pieces of denim material onto the tail.

We tie a bright bow around our cat’s neck, and you can put a sewn mouse or fish in his paws. If you want to give a product, a souvenir, for example, smoking pipe.

How to make a cute and original stand under a paper phone, our small master class will tell you. The stand can be made from a base: a cardboard ring left over from scotch tape, an empty round box of chips, salt, coffee, or a cup of cotton swabs.

Mobile communication devices are found in every home; they have become almost indispensable for modern man and perform many functions. Therefore, quite often they need to be kept not in your pocket, but on the desktop, so a stand for a smartphone necessary thing for each. There are many ways to make a phone stand, but one of the most best options This is, of course, wood, since, despite its hardness, it will not scratch the smartphone and will look good both in the office and on the table at home.

Most easy way How to make a phone stand with your own hands from wood is just to make it from an ordinary plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is already ready. Since the board has a large plane, after you put your mobile phone in the slot, it will stand firmly and securely on the table.

The most important thing in this wooden phone stand is the base area that will be in contact with the table; it must be large enough to cope with the functional load. As a basis, such homemade stand for a telephone can be made of any wood and can be given any shape. But the manufacturing process itself is limited to the fact that a groove is simply made in the board using a router. The groove can be made flat or sloped, depending on the angle at which the device should be positioned.

When you make your own smartphone stand, it is important to sand it well, especially in the groove area where the mobile will sit. After all, if there are irregularities, you can scratch the glass, and this will ruin appearance your gadget.

Complex design

If you want your mobile device to always be in sight, not get lost in documents, and at the same time your desk looks beautiful and solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don’t worry, you don’t need a lot of tools or material for this either. The most important thing is not to rush and carefully think through the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small planks.

The design of such a stand is as simple as possible; you take two identical wooden blanks rectangular shape. On one side, approximately a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not go at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both workpieces, a slot is made up to half the width of the workpiece.

For someone just starting to work, it may be difficult to choose correct angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and simply make marks on the side at the end. Well, in addition, to prevent the phone from slipping, you need to make a groove on a horizontal board, or glue a small strip that will be a stopper.

After all the slots are ready, you just need to sand the stand well so that the bumps don’t scratch the phone’s body, and cover it with tinting or just varnish.

There are many ways to make a phone stand of this design; for example, you can make the vertical part of the stand shaped, which will significantly improve its appearance. The forms can be the most variety of hand, leaf, animals and in general anything you can think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wooden options are not only durable, but also beautiful view. In addition, they look much more noble than other materials, since a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, to make your handmade mobile phone stand beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it may simply be damaged.

You can make a variety of phone accessories at home and you don’t need to have a special tool to do this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home this will also be easy.

Don’t be afraid to experiment and imagine so that the stand you make is unique and not like everyone else’s. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly varied things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores; you can only order them or make them yourself. The second option is much better, not only in terms of savings, but also in terms of expressing individuality.

Even if you do not have experience in making any crafts from wood, do not be upset, as there is nothing complicated about it. It is enough to plan everything carefully, calculate what tools and materials will be needed, and only then begin the work itself. If something doesn’t work out for you, you can try again, rarely does anyone succeed in doing everything correctly the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do everything right.

How often, when we are at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. Ours will tell you how to do this. step by step wizard Class.

How to make a phone stand with your own hands: options for the office and car

Whether at work or in the car, we all need to be connected at all times. At the same time, you don’t want to spend a lot of money on expensive stands, because they can be made from waste and used materials.

The simplest version of a phone holder is a card stand. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, without allowing it to break.

Experience shows that a plastic card stand is very reliable and can even withstand air travel during severe turbulence.

To make a phone stand from paper clips or binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and the resulting structure should be placed on the table so that the clamp bigger size rested on its surface.

Similar coasters can be made in five minutes from clothespins.

Paper clips make an excellent car stand. To make it, you need to disassemble the clamp big size and bend the metal parts slightly as shown in the photo below.

To avoid damaging the surface of the phone metal fastenings It is recommended to wrap the threads in several layers. We return the holders to their place, additionally securing them with adhesive tape and a rubber band. We attach the clamp to the ventilation blinds. The phone is securely attached between metal parts binder.

Ordinary office paper, folded in a certain way, can even support the weight of a large smartphone. To make a paper stand, you need to measure the dimensions of the phone and adjust the pattern below to fit them.

Cut the piece out of paper, fold it along the dotted lines and insert the side parts into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for stands for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of your home. Let's consider options for such products.

A phone stand made from newspaper tubes will be a wonderful gift and great decoration any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of approximately 1-1.5 cm and firmly fix them in the machine or in any convenient way. We place knitting needles or wire in the outer racks to make it more convenient to form smooth and neat contours of the product. We begin to braid the base with a working tube using the rope technique or calico weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

We weave a rectangular piece of the required length. We take out the knitting needles or wire. The ends of the stands are carefully tucked in and trimmed. We give the workpiece the required curved shape, if necessary, wetting it a little with water.

Similarly, we weave the leg of the stand using fewer tubes. We bend the finished leg, install it on the main part and secure its posts between the rows of the stand. We cut off the excess and hide it. We coat the product with glue, if desired, additionally paint it and cover it with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

Modular origami is a fairly young, but very popular type of needlework. With its help, you can make many unusual and original gizmos, including a phone stand from modules.

To make a stand you will need double-sided blue and Pink colour. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. It will require 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we place one pink module in the middle.

In the eighth row we put 6 modules, make a skip, another 10 modules, skip, 6 modules. The number of pink modules is 2 pieces. In the next row, we place three pink modules on the pink section. We begin to design the shaped edging of the stand, as shown in the photo below.

In the back part we form a heart-shaped pattern, above which we install a number of modules blue color. Gradually narrow the stand until a triangular wedge forms at its back.

The module stand is ready!

Video on the topic of the article

We invite you to watch the video tutorials below on how to make other options for phone stands.

In the world modern technologies It’s hard to imagine a person who doesn’t have a mobile phone. With the entry of gadgets into our lives, accessories also appeared, of which there are a huge variety on store shelves and on the Internet. Often, a regular holder, case and other things to add character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is perfect solution for each.

Making an accessory is not at all difficult. To carry out the mission, all you need is materials, time and desire. There are many variations and techniques to help everyone do what they like best. So you should turn on your imagination and use all your ideas.

What can you use to make a stand for a mobile phone?

Making something yourself gives ample opportunities for creativity. A DIY phone stand can be made from the following materials:

• paper;
• wood;
• plastic;
• gypsum;
• any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will be. You can make the most incredible accessories with your own hands that are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be made from ordinary sheets of paper? This material would actually make a great phone stand. It’s not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

• colorful paper or white paper, which will then be decorated;
• multi-colored gouache, watercolor or acrylic paint;
• glue;
• ruler for measurements;
• simple pencil;
• scissors;
• various decorative ornaments, which will be appropriate, should also be kept on hand.

A properly organized space will help you create a DIY phone stand in a matter of minutes. Consequently, the one who embodied it will have an excellent opportunity to become the owner of a beautiful and convenient accessory for mobile.

Sequencing:

• First you need to figure out what shape the stand will be.
• Then you need to draw templates of the required sizes on a piece of paper.
• Elements for the product are cut out from them.
• Then carefully, according to the diagram that was previously drawn or printed from some website, we glue the necessary parts together.
• After this, you should wait until all the elements are fixed.
• The next step is connecting the individual parts together.
• Let all fasteners dry. After this, you can start decorating the product. At this stage, you can use various sparkles, buttons, beads and other small beautiful elements.
• After decoration, the phone stand can be considered ready. We created a masterpiece with our own hands. With the advent of such a device, there will never be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are a lot of options using which you can turn any idea into reality. Why is it better wooden holder? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. Truth to do wooden stand, you can’t get by with sketches and ideas alone. IN in this case You will also need:

• special equipment;
• skills;
• ability to work with wood.

Before you make a phone stand with your own hands, you should analyze your actions. If you have never worked with wood before, then it is better to rely on a paper phone holder. And if you have experience, then for work you need to prepare:

• the wood from which the structure will be constructed;
• woodworking tools;
• product diagram;
• a felt-tip pen for drawing on wood;
• ruler;
• glue;
• accessories (buttons, beads, rivets);
• simple pencil.

Once all the necessary elements are at hand, you can begin to directly implement your plans. The work sequence is as follows:

• First you need to find a suitable diagram for the product.
• Then you need to put marks on a wooden base, along which the connector will be cut out in the future.
• The next step is to cut out the shape with the available tool.
• Then it is necessary to carry out control measurements and find out whether it fits mobile phone into the cut-out connector.
• After this, you need to glue the prepared parts together.
• The next step is to make the product smooth. This can be done with a file or special device, operating from the network.
• When the surface is smooth, you can paint it ready-made form some color.
• After painting, you need to wait for the product to dry.
• The work is completed by gluing the accessories chosen for this mission.
• At the end completely finished design should be opened with varnish, which will add shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to make such an idea a reality. After all, it’s much more pleasant to put your phone in a stand that you created with your own hands.

Beautiful design of a phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories you have at home. It can be:

• shells;
• buttons;
• rhinestones;
• beads;
• foil;
• colored tape.

In general, everything that is at hand and has unusual look, can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Once you get the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making several spare coasters: what if someone suddenly invites you to visit, and there will be nothing to give! A stand for a mobile phone is always useful, even if a person already has one, then a second one will never hurt.

A big and warm hello to everyone! I haven’t written in the “DIY” section for a long time. Regular readers have probably forgotten that such a thing exists. But oh well, today I will improve. And I will share with you very cool ideas on how to make a phone stand with your own hands.

Lately I read a lot, study information, watch videos. But holding the phone in your hands is not very convenient. And it happens that, for example, I’m preparing food, cutting food, and I have to prop up my phone with whatever comes to hand. And suddenly the idea came to me, why not buy a stand in the store that will make my life much easier. Having scoured the Internet, finding the answer to the question of what it costs and what it costs, I came across a photograph that showed that very thing, but made in seconds and with my own hands. Then the idea sparked in my head to put together several inspiring ideas. And in the end, I hope, an interesting post was born. So, let's begin!

I suggest starting with the very best option for a paper phone stand. You can build it at any time and anywhere, the main thing is to have a sheet of paper approximately A4 size on hand. It seems to me that students and schoolchildren will like this idea. Main principle here is to take a sheet of paper, preferably thick, fold it lengthwise to make at least 3 layers, but of course everything depends on the width. Then you need to fold the paper again, making folds across so that 3 wide edges of the same width and one small one are formed. Look at the photo, it clearly shows what the end result should be. The last step is to make two small folds.

I can’t even imagine who could have such a rarity as a box of tape cassettes for a tape recorder. But it turns out that such an object, seemingly completely useless, can be used. In a couple of seconds, by turning it over in a certain way (see photo), you will get a very cool stand for your smartphone. Moreover, if you paint it with paint from a bottle, then few will guess what it is made of.

If you have several DIY kits lying around at home, then it is quite possible to build a structure to hold your phone in a horizontal position. And this is done in a matter of minutes. And it’s also easy to disassemble it, putting it back in place.

A plastic card as a phone stand? The idea is bold, but quite realistic. All you need is a couple of cards and some strong scissors. Trim the parts as shown in the photo and enjoy watching the video, taking photos and reading e-books.

Next method Make your life easier by stocking up on six pencils and four erasers. Basically, you need to make a three-dimensional figure, as shown in the picture. Start with a simple triangle, then add one edge at a time, securing it all with rubber bands. Get an original delivery for the phone.

Having a couple of wooden pieces in the house, it is possible to make an interesting and original, and most importantly durable device for smartphones. You can glue parts using hot glue or universal glue. polymer glue. And indeed, this design will serve you for a very long time.

Here are some more lifehacks for your phone to keep it running while charging. Such devices are needed mainly when there is simply nowhere to put the gadget unless there is a table or cabinet nearby. Such holders are made from plastic bottle, as in the first case, or from thick cardboard, as in the second.

How many ideas have I seen with a bushing from under toilet paper, but this! You will need the sleeve itself and 4 paper buttons (to be honest, I don’t know what they are called correctly). Attach them as legs, cut a hole at the top to size so that you can put your phone through it, and enjoy the result. It is better, of course, to decorate such a stand with something or simply paint it.

As you already understand, making a phone stand out of paper is the easiest option. So, you will need a piece of very thick cardboard. If there is none, then make it from several layers, gluing them to each other. Cut holes in the part as shown in the picture. Moreover, such a holder is suitable not only for smartphones, but also for tablets.

Well, the very last way I suggested to make a phone stand with your own hands is to use stationery clip. I’m sure everyone will have it, and if not, then it’s not very expensive in stores. Take a couple of these devices and bend one round part of the paper clip inward. It will serve as a barrier for the phone to prevent it from rolling off. Place one binder inside another. Place the smartphone so that it rests on one ear, and the second one is bent towards the screen. Here's a simple holder for you!

That's all for today, I hope you liked the ideas and were inspired to make one of the presented gizmos! See you again!