What products should I use to clean interior doors in an apartment? How to clean interior doors from grease stains How to clean painted white doors

After repairs, dried stains of whitewash and lime often remain visible on the iron sheet. You can get rid of dirt using sandpaper. It is not recommended to clean vinyl artificial leather metal doors using this method: hard sandpaper will ruin the elastic artificial leather.

An effective recipe for removing whitewash stains is to apply vinegar dissolved in water to the stains. In some cases, you can clean a metal door from stains using kerosene diluted with water. After treating the door with kerosene, you should be prepared for the appearance of a strong chemical smell. It will completely disappear in 15-20 hours. Cleaning the door with kerosene is only suitable for metal structures that are used outdoors.

Tip: in stores household chemicals You can purchase a special cleaning concentrate without a strong chemical smell (for example, Probel). A substance diluted in a certain proportion with water effectively removes limescale stains and whitewash from door leaf.

Cleaning the door leaf from other types of contaminants

Getting rid of traces of tape and paint stains from the door is easy. It is convenient to erase prints of masking tape from a steel surface with a napkin previously moistened with hot water. Old tape residues can be treated with acetone-containing liquids or alcohol-based solvents.

Universal white spirit will clean the canvas from paint stains.

To safely transport metal structures, manufacturers often use protective film. Sometimes it sticks tightly to the door surface. How to remove film from metal door fast? Professionals recommend using a plastic spatula and solvent No. 650.

The choice of door cleaning product usually depends on the specific finishing material. Solid or veneer entrance doors are treated with polishing and cleaning agents created for furniture care. Dirt from powder-coated doors can be easily removed with acetone (solvent). For doors with any type of finish, you cannot use products containing abrasive particles. It is not recommended to remove stains from doors with sponges or scrapers whose surface is made of metal or plastic material.

Wooden interior items always look beautiful and appropriate, no matter what style and design prevails in an apartment, house, or office. Extend service life, clean any contamination, renew appearance or restoring a wooden product is quite simple if you wash it often interior doors, select harmless cleaning and polishing products. In addition to this, there are many folk ways eliminating contamination.

Interior or entrance door made of natural wood, constantly requires cleaning. To do this, gentle detergents without abrasive particles that can damage the coating are selected. The composition should not contain solvent, acid or other destructive substances.

When choosing a cleaning product, you should pay attention to the inserts, which can be made of plastic, glass, or metal. In addition, manufacturers coat wooden canvas with varnish or paint; this also needs to be taken into account when choosing a cleaning product.

So, how to clean dirt from wooden doors:

• Silit - universal remedy with a convenient spray, which is simply applied to the door leaf and washed with a small piece of fabric. To add a beautiful shine, you can use a piece of newspaper or paper towel.
• Domestos and other plumbing cleaning products will perfectly clean plastic inserts from contaminants of various origins.
• Mister Muscle is suitable for cleaning varnished wooden surfaces, stained glass, glass, and metal inserts. To do this, purchase a universal product that can easily be applied to contaminated areas of the door using a sprayer. Dirt is cleaned with a regular soft cloth or napkin.
• Dishwashing detergent is a foamy product that is perfect for cleaning wooden interior doors. You can make a soap solution from it. The detergent can also be used in pure form. Simply apply a small amount of gel to a soft sponge, rub the stain and wash it with a clean washcloth. The advantage of this method is the absence of streaks after cleaning.
• Polish Pronto, Laska or Sana - the best remedy for removing grease stains, fingerprints, dirt from the door without streaks. The advantage of such household chemicals lies in its composition. During cleaning, the wooden sheet hardly gets wet, so the risk of swelling disappears natural material. You can safely wash varnished wooden doors with polish.
• Wedge or Blink perfectly dissolves greasy stains and dirt from frosted and transparent glass on doors, because they contain ammonia. Such products can easily cope with primer that gets on the surface. new door after its installation or renovation in the house.

There are many similar cleaners and detergents designed specifically for wood that can be found on the shelves of hardware stores. All you have to do is pick correct composition, and the wooden door will delight you with its glossy shine and natural color every day.

Standard door cleaning scheme

Regardless of which detergent was chosen for cleaning interior or entrance doors made of wood, the procedure is standard. To wash off small stains, you should perform some procedures in a certain sequence:

Such simple steps will help clean dirt and grease stains from interior doors in just 10 minutes.

For minor stains, it is better to use gentle products. Many ingredients for their preparation can be found in the kitchen or in the medicine cabinet, this can be baking soda, table vinegar, lemon juice, ammonia, vegetable oil and much more. But only strong solvents, such as gasoline, can deal with serious dirt stains.

How to clean wooden doors at home, folk remedies:

• A vinegar and baking soda solution is a great way to get rid of stains on painted wood doors. To prepare it per liter warm water add 20 g of soda, 15 g of powder for hand wash and 50 ml table vinegar. You need to wipe off dirt carefully using a soft sponge. A pure soda solution works great for removing grease on wooden surfaces.
• Citric acid or fresh citrus juice. To prepare the cleaning product you will need 0.5 liters of warm water, a tablespoon of dishwashing detergent, 20 g citric acid or 50 ml of citrus juice. After mixing all the ingredients, all that remains is to apply the liquid to the doors and dry the wood with a dry cloth. A solution of lemon juice and water (1:1 proportions) perfectly combats foreign odors and, which is important for people who have pets in the house.
• Ammonia quickly removes stains on painted doors. To do this, 10 ml of ammonia is diluted with 500 ml of warm water.
• Vegetable oil will help get rid of traces of whitewash on doors after repairs. To do this, 2 liters of water are mixed with 50 ml of product. The advantage of this cleaning method is the absence of streaks after washing. And sunflower oil fights well with or glue. To do this, the product is applied to the areas of contamination in its pure form and left for 2-3 hours. Then wipe the surface with a dry cloth.
• A hair dryer and pencil eraser also work great to remove traces of glue or tape. It is enough to blow hot air on the dirty areas and rub them with an eraser or napkin.
• Fresh potatoes can clean old stains and grease from interior doors. It is enough to cut the root vegetable in half and rub the dirt with the cut. After this, you just need to blot the stain with a dry cloth.
• A mixture of clay and vinegar (1:1 proportions) copes well with complex stains on wooden surfaces. After this treatment, the door is wiped with soapy water and polished with a dry cloth.

After installing the interior or front door made of wood on the canvas can remain polyurethane foam. You can eliminate it with kerosene or alcohol. Simply apply a small amount of product to the stain and wipe it off with a cloth. Using these solvents you can wipe off oil or water-based paint that got on the door leaf. Such products must be used carefully; they should be applied using a cotton pad or a small piece of cloth.

After wiping off the dirt, you should immediately wipe the wood with a dry sponge or cloth.

Further care

Constant cleaning of entrance or interior spaces wooden doors may lead to damage to the protective layer. Even regular use of gentle detergents is fraught with the appearance of scratches and chips, because wood is a capricious material. At least once a week, the housewife will have to use radical methods to care for wood products.

The most popular means include:

• A polish that perfectly fights not only dirt, but also small scratches. This product is intended for caring for wooden surfaces, removing dirt and greasy stains.
• Wax pencils are an excellent tool for restoring damaged wood. For these purposes, you can also use ordinary wax, which copes well with scratches, cracks and chips. Of course, it is better to use such products only for doors that are not varnished, since their use has a certain sequence. First you need to sand the damaged areas with fine-grained sandpaper. After this, wax or a pencil is rubbed into the crack, scratch, or chip. Final stage restoration - grouting this area with a piece of soft cloth.

The use of wax is a stage that often precedes the coating of a wooden door with varnish. Thanks to the soft texture and transparency of the product, you can smooth out damaged areas and preserve the natural color of the wood.

Varnishing a wooden surface

After the natural wood door has been polished and leveled with a wax pencil, you can begin to coat the surface with paints and varnishes. Instead of wax, you can also use nitro varnish in the form of a spray, which has the same effect, but dries in literally 5 minutes.

The advantage of varnish coating is the ability to preserve the original appearance of the product. The transparent product allows you to preserve the natural grain of the wood and create a reliable protective film. You need to update interior doors in this way as necessary (after the appearance of deep scratches or cracks).

Ways to extend service life

Caring for wooden interior doors involves not only constant cleaning or coating with paints and varnishes, but also extending operational periods products.

To do this, it is necessary to constantly check the performance of the hinges, maintain desired temperature, room humidity level, etc.

To the number necessary measures include:

A door made of natural wood is an environmentally friendly, durable, incredibly beautiful piece of furniture that can fit into any design and style.

If you select gentle cleaning products and properly care for delicate surfaces, they can serve their owner for decades, because a wooden entrance or interior door is the face of the entire house.

Doors are made from a variety of materials, each of which requires a special approach when cleaning. Metal and glass are impervious to the most active solvents, so the use of acetone and white spirit is allowed. In other cases, it is recommended to use alcohol, vinegar, citric acid and soap solutions - they are quite sufficient to dissolve most grease stains on doors and interior doors.

Doors are a place of increased contact, which is why stains appear there with enviable regularity. The problem of cleanliness, including doors, is especially noticeable in kitchens and in houses where there are small children. The cleaning tasks are as follows: how to wash greasy stains from doors so that the dirt disappears and the coating remains intact.

Cleaning MDF doors from greasy stains

In order to clean MDF doors from greasy stains and stains, it is not necessary to use expensive specialized products.

Of the available substances, potatoes work well with fat. The washed potato is cut in half and the exposed part is rubbed onto the stain until it is completely saturated with potato juice. Allow a few minutes to dry, after which the stain is wiped off with a dry, clean cloth. To avoid streaks, the cleaned coating is rubbed with talcum powder or powder.

Note! Fresh stains on MDF are wiped off with a solution detergent for dishes, diluted and foamed in warm water.

Steel door

The advantage of such doors is that the metal is resistant to even the most active fat solvents.

Therefore, when metal doors become dirty, you can safely use acetone or white spirit, which is used to impregnate a clean cloth. Such substances very quickly dissolve fat on a hard surface; it is not absorbed into it, but immediately passes into the fabric. To avoid streaks after cleaning, you can wipe the metal with a wet cloth.

Wooden door

There are two types of wooden doors - unpainted and painted.

In the first case, it turns out that the greasy stain falls directly on the wood, which tends to become saturated with liquids before they dry. In the second case we are dealing with paint on different bases, which require a special approach - you need to wash wooden doors from greasy streaks and stains, and not damage the paint and color.

Unpainted wooden doors

To remove fat from clean wood, you need to prepare a special solution, which consists of vinegar and clay in equal proportions, mixed to the consistency of a homogeneous paste. Rub this paste generously onto the dirty stain. The door is left in this state until the paste is completely dry, usually about half an hour is enough. After drying, the door needs to be washed warm water.

Painted door

Here the wood is coated with a layer of paint, which prevents grease from being absorbed into the fibers. Thus, the dirt dries on the surface; it can be removed with alcohol or vinegar. The use of acetone or other solvents is strictly not recommended, because they can damage water-based paint or the one that was made based on them.

A clean cloth must be soaked in liquid, then the stain must be wiped until the fat dissolves and begins to be absorbed into the fabric. Movements should be in the direction from the edges of the stain to the center so that the fat does not spread even more over the surface.

Note! To avoid streaks, wipe the cleaned area with a light soap solution prepared in warm water.

Wooden doors, varnished

To remove grease from varnish, you can use vinegar or citric acid diluted in warm water. Such substances will not harm the varnish coating due to their low activity, but even old greasy stains will succumb to them.

As in previous cases, you can use a clean cloth or cotton pads (if the stains are small). Residual marks can be cleaned with warm water or soap.

Glass door

Glass is one of the most solvent-resistant materials, so grease can be washed off with a variety of substances.

Various alcohols and alcohol-containing liquids are especially effective (this applies to strong alcohol, antiseptics and special products for cleaning glass and tiles). Solution ammonia with water in a ratio of 1:10 will cope with fresh stains. Additionally, you can use vinegar, medical alcohol, soda or citric acid. Acetone or any paint thinner can cope with older and more durable stains.

In addition to the smooth glass surface, glass sheets with protrusions and a rough surface are used to make doors, where fat easily gets clogged and cools.

In such cases, it is necessary to wet the glass more abundantly so that the solvent penetrates as deeply as possible into hard-to-reach places and breaks down the fat.

Dissolved fat must be wiped off with a soft, clean cloth. To avoid streaks, the glass is washed with an alcohol-containing window cleaner and wiped dry.

PVC doors

In order to wipe off stains on doors coated with PVC or eco-veneer, use a mixture liquid soap and plumbing cleaning products. The liquids are mixed in equal proportions, the resulting mixture is evenly rubbed into the greasy stain using clean rags or a sponge. It takes 5 to 10 minutes to break down the fat, after which the door is washed with plenty of warm water and wiped dry.

Doors made of laminated chipboard

Very common door covering due to its cheapness, hence the most problematic thing - upper layer consists of paper that should never be rubbed, otherwise the appearance of the door leaf will be irrevocably damaged.

To effectively dissolve fat, you can use isopropyl alcohol, vinegar, citric acid and cotton pads, which are used to wipe the stain very carefully. The discs need to be changed periodically to avoid spreading the fat even more over the surface.

For high-quality laminated chipboard coatings, you can use solvents or acetone. In this case, the stain is not wiped, but soaked by applying a damp cotton swab for 3–5 minutes. After this, the dirt should be wiped with a dry cloth.

How to clean an interior door with a polished surface

To clean polished interior doors from greasy stains, you should use all of the above products. Additionally, after the dirt has been removed, you need to use it, which will restore the original shine and remove all matte traces of cleaning.

The video below shows various ways removing greasy marks from doors:

Doors accumulate the same dust and dirt as walls. This means you can clean and wash them in the same way. But only a few doors have a surface as smooth as the walls.

To remove surface dirt, wipe the door with a dry towel. Then wrap the broom in an old soft towel and go over the corners and crevices where dust accumulates. Clean intricate embossed jewelry with a soft toothbrush.

Wash the door once it is free of dust and dirt. If it is wood and stained, use wood oil soap mixed with water as directed on the package. A couple of home remedies will help you clean a painted door.

Mix 4 liters of warm water, 1/2 cup of ammonia, 1/4 cup of clear vinegar and 1/4 cup of washing soda.
Dilute 1/2 cup of ammonia and 1 teaspoon of mild dishwashing liquid in 4 liters of warm water.

Dampen a natural sponge with the solution until it becomes completely soft. Then squeeze it out better. Wash the door from bottom to top, thereby avoiding streak marks. Trite small areas in a circular motion. Rinse the sponge more often and better so as not to smear the dirt. If the solution remains clean, there is no need to wash the door with water.

There is no need to remove door accessories to clean them. Use plastic wrap instead of a screwdriver. Secure it with electrical tape around the part you are going to clean. If it's metal (like a handle), use a metal cleaner like Buggy Metal Cleaner, which will clean any metal, including brass. If the accessories are glass or ceramic, plastic film not required. Wipe them with a rag soaked in alcohol, which will not harm your already clean door.

And a little more doors...

Each type of door requires an individual approach to care and products intended only for certain types of doors, since the use of products that are not intended for care, for example, for doors with a varnish coating, can damage the varnish itself and their surface.

Interior wooden doors without varnish require the most delicate care - when cleaning such a door, you must first remove dust, and only then carry out the cleaning itself. Door cleaning products can be either specialized or so-called “folk remedies” - solution tap water with alcohol, approximately in the ratio of water - 90%, alcohol - 10%. After cleaning with this solution, you need to remove any remaining liquid with a dry cloth. For wooden doors with a varnish coating, after this cleaning procedure, you need to apply polish or other special remedy. The application of such products is necessary, since the varnish coating can become covered with cracks, and the polishing agent fills them, preventing the wood from drying out and the formation of even larger cracks.

From the history of doors.

The ancestors of the first wooden doors for buildings are doors made of sycamore or German maple, used in Ancient Egypt(3000 BC) and Ancient Persia (1000 BC). In Italy the most ancient arched door is, perhaps, an Etruscan door in Volterra (4th century BC). Behind long years existence, the door acquired a number of fundamental characteristics, such as an architrave (from Greek archi - elder, main and Latin trabs - beam), doorjamb, threshold, door panel, book door, etc. The architrave and jamb were transformed into today's door frame, the threshold remained virtually unchanged, and the ancient doors on pins - “turntables” were modified into technologically advanced doors on hinges. However, "pin, rod", as structural element, which ensures the movement of the door leaf, remains unchanged.

As for the material that served as raw material for doors, iron and bronze gradually gave up their positions to wood. As far as the works of outstanding sculptors and architects that have survived to this day can be judged, wooden doors were already diverse in design and decoration even then. Walnut and oak, famous for their strength, were and remain the most used wood materials, while more valuable types of wood: maple, rosewood, pear, teak, ash, cherry and others were temporary favorites in different centuries.

Ways to clean interior and exterior doors.

The front door is the face of the owner of the house. Very often, the condition of the door can be used to judge the well-being of a family. After all, what safer door, the higher the likelihood that there is something to hide behind it. Due to constant use, the gates often get dirty, so you need to know what you can use to clean them.

It’s quite easy to wash everything off a metal door. You can use abrasives, but there is a risk of scratches.

Stain removers:

• Mister Muscle. You need to purchase a universal product. It is applied with a spray and removed with a cloth.
• Dishwashing liquid. Just dampen the sponge and apply a little product. Rub the door and rinse off the foam damp cloth.
• Silit. The same product is sold in a spray bottle. Apply to the doors and simply wipe with a cloth.

A wooden door, unlike a metal one, can get wet. In addition, the coating is often not very durable and can be destroyed under the influence of moisture and aggressive substances. That is why dirt is wiped off with a damp cloth. If these are fingerprints then perfect option To remove such contaminants - polish. This is Pronto, Laska, Sana polish.

IN in this case It is best to use glass cleaner. They contain ammonia and alcohol. This allows you to dissolve grease and remove dirty stains.

Product overview:

• Mister Muscle
• Blink

Most often, such doors are made of wood or plastic. In these cases, strong solvents should not be used until the stains are removed. Gentle means are usually used.

Stain removal methods and products:

• Vinegar and soda. It is necessary to dissolve 20 g in 1000 ml of warm water baking soda and 15 g washing powder. Next, 50 ml of vinegar is introduced. A sponge is soaked in the solution and the dirt is removed.
• Lemon acid. Dissolve a spoonful of dishwashing detergent and 20 g of citric acid in 500 ml of warm water. Wash the doors with liquid.
• Ammonia. 10 ml of the product should be dissolved in 500 ml of water and rinse the contaminated surface with the liquid.

The varnish can be easily damaged. This is why you should not use solvents or abrasive powders to remove stains. All this will ruin the coating. The best way to clean the door is with polish. Apply a little product to the cloth and wipe the surface.

If these are fingerprints, then you can remove them from the plastic using ammonia. A glass cleaner with ammonia is also suitable.

Options:

• Domestos
• Silit
• Dishwashing liquid
• Baking soda solution

The point is not to wash away the remaining urine, but to dissolve it. Otherwise, the cat will still mark the territory.

Cleaning products:

• Lemon. Dilute lemon juice with water in a 1:1 ratio and wipe the doors with the liquid. Before doing this, wash everything with soap.
• Vinegar. First, wash the dirt with soapy water, and then with a solution of vinegar with a concentration of 1:1.
• Iodine. Dissolve 3 drops of iodine in a glass of water and wipe the cat’s marks with it.

There are several options for cleaning whitewash. You can use Mr. Proper, which leaves no streaks. But traditional methods are cheaper.

Review traditional methods to remove whitewash:

• Vegetable oil. Dissolve 50 liters of vegetable oil in a bucket of warm water and wash the floor with the liquid.
• Vinegar. Pour 20 ml of vinegar into a bucket of water and wash the floor with the liquid.

After drying, the primer strongly eats into the surface. That is why you can use solvents rather than abrasives. You can apply a fresh primer and try to wipe off the wet stain with a dry cloth. After this, the surface is washed with water.

Ways to wash the primer:

• Ammonia
• Glass cleaner
• Vinegar solution

This is enough actual question, as dust sticks to the glue and dark spots appear.

Ways to remove tape stains:

• Vegetable oil. It is necessary to saturate the fabric with it and leave for several hours. After this, the doors are washed with warm water.
• Hairdryer It is necessary to heat the remaining glue with hot air and wipe it with a napkin.
• Eraser. Oddly enough, you can remove the tape using a regular eraser that wipes away the pencil.

This kind of contamination is quite difficult to clean off. It is necessary to remove the foam as close to the surface as possible using a scraper. Next, apply kerosene or white alcohol to the stain and wipe with a cloth. You can also use the hard side of the sponge.

For removing oil paint you will have to use a solvent. Vegetable oil, white alcohol or kerosene cope well with stains. Saturate a cloth with one of these liquids and wipe the doors. If it is a water-based emulsion, then you can remove the remaining paint using warm soapy water with the addition of ammonia.

No matter how scary the stains may seem, they can almost always be washed off if you know a few tricks.

VIDEO: Cleaning doors