How to assemble a kite from what you have available? Techniques for creating different types of flying kites with a guarantee of successful launch Chinese kite how to tie a rope.

home

Scud

Have you wanted to build your own kite? Here's an easy way to make your own snakes! Kite consists of the following main parts:
The Spine. This is the vertical or horizontal base of the kite.
Spar(spars).
Guides that are placed either across or, as well as obliquely relative to the “spine”. Sometimes they are curved.
The Frame.
Together, glued together or otherwise assembled, the base and guides form a frame on which the fastenings for the slings and, of course, the main covering are located.
The Cover. Paper, plastic, or fabric (nowadays nylon is often used) that is attached to the frame to capture airflow. The Bridle. One or more spine restraints or spars that help control the kite in the air.
The Flying line.
The ropes, now often made of nylon, act as a line for the kite to keep it in the air.

The Tail.
A long strip of paper or nylon tape that helps balance the kite's flight. Not all kites require a tail. The Reel (reel).:
A reel on which nylon ropes (slings) are wound. Used to control and control the kite during flight.
Diamondback kite
You will need
following materials
Rope, preferably nylon nylon
1. tape or glue
2. 1 sheet of thick paper (102 cm x 102 cm) or nylon fabric
3. Then cut a groove in the middle of each stick, as well as along their edges. The groove should be deep enough so that the sticks fit together more securely. Cut a piece of rope, it should be long enough to cover the entire frame and hold the sticks together. Place the sticks together and wrap the rope tightly around them. Then coat this fastening with glue for greater reliability. Stretch the rope around the perimeter so that the frame of the kite becomes more durable. Make a strong loop and secure it to the top of the kite. Make the same loop at the bottom of the kite. Done, the sling should tension the frame, make sure that the sling does not deform the perpendicularity of the sticks and does not change general design.
4. Place the sail (paper or nylon fabric) on the table. Place the finished kite frame on the material. Trim the material around the kite, leaving 2 - 3 centimeters from the edges of the kite. Fold the edges of our material over the frame of the kite and glue these edges so that the material holds tightly.
5. Cut the rope approximately 122cm long. tie it to the top loop of the kite and, stepping back a little from the top, make a loop and pull it to the bottom of it. Secure it there.
6. Make a tail by tying small ribbons, about 10cm each. along the entire length of the tail. Attach the tail to the loop at the bottom of the kite.
7. Decorate the snakes as you wish and to your taste.
Well, that’s probably all, it’s time to start flying a kite.
Some tips:
It is better to place the support (attachment) point of a long sling slightly in front of the center of gravity.
Installing a tail will give additional stability and efficiency to the kite's flight.
Check if the kite is balanced by holding it by the line. If the balance is out of balance, you can correct this defect by attaching paper.
Each kite is different in its own way, so you may have to make some adjustments to the design yourself.

Both children and adults are delighted with this fun - flying a kite. They are triangular, diamond-shaped, box-shaped, in the form of birds or dragons. They even come in the form of a butterfly flapping its wings.

The story of the flying kite begins in ancient China. There it received the name “dragon kite” due to the fact that on the Dragon Festival, huge constructions of paper bodies with a snake head at the end were launched into the air. This tradition is still alive today. From China, dragons became widely known in Asia. Later, in Europe they learned how to make a kite out of paper.

Over its long history, this simplest aircraft has served science more than once, as a military tool, and helped in the development of aircraft. Now it has turned into a well-known toy, popular with both adults and children.

Of course, in modern world you can always buy a ready-made kite in a store. But if you know how to make a flying kite with your own hands, you can not only enjoy the creative process, but also get unique toy. Created with my own hands, it will be a greater joy than the one that was purchased. The manufacturing process is very interesting, exciting and also uncomplicated. And the manufacturing costs required are minimal.

How to make a flying dragon with your own hands

To create an air dragon at home you need to have basic concepts about the main elements of its design:

At home, you can make the following types of flying dragons: flat air and box-shaped (volume).

The materials for making your favorite toy can be different, for example, paper, fabric, polyethylene. For some models will be needed wooden slats . For the tail you will also need ribbons or threads with bows or tassels: it all depends on your imagination.

Snake "Monk"

How to make a flying kite out of paper? Try the simplest one first classic version- paper “Monk”. Even small children will be happy to take part in its production. To make this origami, you will need:

a square made of a sheet of thick paper (not newspaper);
spool threads for bridles;
narrow strips of bright fabric or ribbon for the tail;
scissors;
glue;
needle for making holes.

It is advisable to choose sheets no larger than A3. Big sizes require higher paper thickness which leads to an increase in model weight. As a result, a large device may become so heavy that it cannot take off.

The scheme for its manufacture is simple:

Despite the ease of manufacture, the Monk will fly well. It must be launched on spool threads, in a slight breeze, because strong wind can easily crush it. If it starts to spin from side to side when starting up, the tail may need to be adjusted. You need to either lengthen it or make it heavier. In the case when the Monk takes off with difficulty and gains altitude very poorly, the tail, on the contrary, should be made lighter. When the tail is adjusted correctly, the kite should fly steadily, wagging slightly in different directions.

Frame snakes made of paper, fabric, polyethylene

Another type of flat flying structure is the frame kite. To build it, in addition to paper, fabric or polyethylene, wooden slats are also needed And. One of the schemes for its manufacture is used in the presence of the following materials:

sheets of paper or bag;
two wooden slats (one is shorter, equal to approximately 2/3 of the length of the first);
strong thread;
fabric (any);
scotch;
glue.

To create a frame, you need to connect the slats in the shape of a cross. You can fasten them with twine, pre-moistened with PVA glue. Then you need to cut out, focusing on the frame, the sail of the dragon itself. For this model it will be diamond-shaped. The ends of the sail must be firmly tied to the ends of the slats; you can even use tape for strength. In the middle of both sections of the smaller rail you need to tie ropes and secure them in the middle cross rail. You will get something like a pyramid of ropes, which needs to be secured to a railing. It remains to secure the tail at the bottom of the product. For Have a good flight the tail should be significantly longer than the main part.

Frame devices are the most popular and are easy to build at home. They can have any other shape: the popular triangle, star or bird. The form is limited only by imagination and materials.

Dragon in the shape of a triangle

The classic triangular shape is a more difficult to manufacture variety of flat structures.

It will require a thick plastic bag , slats, rope with reel. Dimensions finished product depend on the size of the package and the height of the launcher. The manufacturing scheme for a triangular kite is as follows:

To resemble a bird, one feature is used: a bowstring is pulled between the side parts.

Box kites at home

Another type of flying kite that you can make yourself is the box-shaped, or three-dimensional, flying kite. To make it you will need:

wooden sticks - 8 pieces;
sheets of thick paper;
strong rope;
ruler;
scissors;
glue.

For the manufacture of a box-shaped device At home, instead of durable paper, durable plastic bags, for example, garbage bags, are often used.

The frame is assembled from 4 vertical slats 80 cm long and 4 horizontal slats (spacers): two 75 cm long and two 50 cm long. From sheets of thick paper using glue you need to make two strips, each 186 cm long and 24 cm in width, plus 1 cm on all sides for allowances. Each strip must be divided into 4 equal parts.

Corners are cut out on the folds in the allowances and strong threads are inserted into the folds of all allowances along the entire length so that they extend into the cut corners on both sides by about 7 cm. Then the allowances and strips are connected with glue. The narrow edges of each strip are connected by side allowances - you get two boxes, but without a bottom. Long slats are placed inside the boxes at the corners and secured with the ends of threads glued into strips. The boxes should be located at the edges of long wooden slats.

Then spacers are placed crosswise so that they rest against the long slats. In places where the spacers intersect, this connection must be secured with thread. The kite boxes stretched by spacers will look like a rhombus. The bridle is made of a thin rope 1.3 m long. One end of the bridle is connected to one of the long slats above the upper box, and the other is attached to the slats above the lower box on the same side. A handrail is attached to the bridle - and you can do a test run. A tail is not required for such a kite.

A box kite can only fly properly in fairly strong winds. Its improved version is a triangular box kite with an additional wing. This type of kite is more complex in design, but it has better aerodynamics, and it takes off in light winds without a run-up.

How to fly kites

Flying a kite correctly is very important. The wind should blow at a speed of 4−6 m/sec. The most preferable place to launch is a field and, if possible, a hill, away from roads and away from wires. It is dangerous if the line of a running kite comes into contact with the wires or hangs on them. Especially if it's electric wires under high voltage. It is also important to take into account the strength of the wind and the strength of the handrail. If there is a strong gusty wind outside, the rope may break and the wind will blow the flying kite onto the wires.

You can launch a flying toy different ways. If a person is alone, then the kite is placed with its front side facing the wind. The one who launches must gradually move backward, unwinding the rope and keeping the structure vertical. Having moved away a little, about 10 meters, you need to pull the rope towards yourself and run carefully. If there is wind, the kite immediately rises up.

It is much more convenient and easier to launch together. So, one remains with the kite, holding it above his head. The person holding the rope must stand with his back to the wind and unwind about 15 meters of the rope, then pull it tight. The sign to fly a kite is to raise your hand.

When the kite reaches a sufficient height, you must carefully release (poison) the line. If a gust of wind occurs, the rope must be released a little, this is necessary to relieve the pressure of the air currents on the body of the structure. When the wind subsides, the flying device must be immediately pulled towards you.

It is better to launch a box kite in the same way - against the wind and preferably not alone. The headwind will carry it forward, but at the same time a lift will arise and it will remain in the air at an angle. If the bridle is made straight, from threads of equal length, then the kite has no angle of inclination and will not rise up even in a strong wind.

On a windless day, you can try to make the kite fly by running forward with it. In this case, it is not the wind, but movement that creates the oncoming air flow that is needed for flight. At the top, the box kite flies on its own, even if the person does not move, because at the top air currents stronger than below the ground.

If you want to have an interesting time, find an exciting activity for the whole family, then making an air dragon is perfect for these purposes. It’s not difficult to make it yourself, and its launch will not leave anyone indifferent.

Attention, TODAY only!

The Chinese have long believed that a kite soaring in the sky takes away all illnesses, misfortunes and worries. In addition, flying a kite is always a spectacular and quite simple activity. The main thing is to choose the right place and take into account some nuances.

What child doesn't dream of flying a colorful kite? What could be stronger than the delight with which children watch a toy soaring in the sky? “Daddy, let’s make a snake!” - says your beloved child. And the father, in response, scratches the top of his head with concern, since assembling a kite and flying it seems especially difficult. But it's not like that at all.

Theoretical minimum

Before you fly a kite, you need to familiarize yourself with the basic concepts:

A lifeline is a thread that is used to control a flying toy;

The bridle is the strong threads woven together that secure the kite to the rail;

Load-bearing area - the size of the kite's projection onto a horizontal surface;

Load-bearing capacity is the lifting force of one unit of bearing area;

The center of pressure is the center of the bearing area.

How to make a toy fly?

How to make a kite so that it floats? To do this, its surface should not be flat, but curve upward under the pressure of the air flow. That is why, when making a kite, it is not recommended to pull the material (paper, oilcloth, fabric) too tightly. Sometimes it is enough to secure just the corners. The center of gravity must be shifted towards the tail, otherwise long soaring will not be achieved.

The leading edge of the kite must be carefully taped or reinforced to avoid turbulence. For those who do not yet know how to fly a kite, it is better to give preference to flying models that have a long tail - it gives proper balance to the entire structure.

Another important element- This is a bridle that should consist of two threads. But such a kite is quite difficult to control, so beginners are better off using a triple bridle.

Home workshop - manufacturing stages

1. To assemble the simplest type of kite, you need to take two thin pine, bamboo or plastic slats 30 and 50 cm long. We measure 15 cm from the end of the longer plank and fasten the small slats at a right angle using strong threads. This creates a crosspiece for a flying toy.

2. At the ends of the planks you need to make round notches into which a thin, strong thread is pulled. You should get a quadrangular frame.

3. Then you need to take thin paper or oilcloth and cover the existing workpiece. To do this, the resulting frame is placed on a sheet of prepared material and outlined with a pencil or marker, adding a small distance to the allowances for fastening.

4. The pattern is cut out, after which the frame is thoroughly lubricated with glue and attached to the material. You can decorate the kite with felt-tip pens, drawing cartoon characters on it (which will delight your children), or depict the slender legs of your beloved woman on it (which will delight you).

5. Now you can start attaching the bridle. To do this, take a spool of fishing line, which is attached to the left corner of the workpiece. Then you need to stretch it to the nose of the kite, and from there to the right corner to determine the length of the bridle. Cut the thread and attach the tip to the right corner of the kite (you get a long thread from one edge to the other). Now we take the reel again, fasten the fishing line in the bow of the structure, measure the distance to the left corner of the kite, add another ten centimeters, cut it and tie it to the middle of the first thread.

6. The tail of the kite can be made from a thin cord or strong nylon thread, measuring 3.5-4 meters. The tail can be decorated with paper bows.

7. Flying a kite is impossible without a leash. To do this, a long strong thread is tied to the bridle, at the end of which you can tie a small stick for ease of control.

Flat flying structures

Such kites are the simplest and most famous. The frame is made of pine or any other light wood. The covering is made of film or paper. Paper does not provide structural stability, so it must be durable (micalette, tissue or rice). If film is used, it should have poor stretch, but at the same time stick well to the frame (it is best to buy acrylic).

What does a snake monk look like?

This flying model got its name due to its resemblance to the hood of a monastic robe. This kite is perfectly centered, so a two-lead bridle is sufficient to launch it. The tail is used as a balancer and should be light and thin. It is better to choose dense material for such a kite, since under gusts of wind it wrinkles too easily and falls.

Bow flying design

This is one of the varieties of flat kite. The frame is built from a pair of slats, which ensures lightness. In this case, the front rail gives rigidity to the entire structure, but there is greater sensitivity to wind. Beginners are not always able to master flying this type of kite the first time.

Box design

This type of homemade kite looks quite solid, but is quite simple to perform. He doesn't need a tail. Moreover, such snakes can lift small loads, making it possible to place small digital camera, having previously turned it on for video recording or burst shooting. This way you can get completely unique aerial shots. But the box-shaped structure stays well in the air only in strong winds.

How to fly a kite: choosing a place

To ensure that nothing interferes with the flight process, you should choose open areas without any obstacles. Trees, kiosks, and buildings located nearby interfere with the direct passage of air flow and create unnecessary turbulence. The sea coast with its breeze is perfect (unless, of course, you have to jump over the bodies of vacationers). Better stay away from highways, airfields and power lines.

How to fly a kite (instructions)

First you need to determine the direction of the wind by simply slobbering on your finger. Now the kite is solemnly presented to a friend (girlfriend, child, wife). You need to stand opposite your assistant, who must hold the kite above his head, perpendicular to the ground. The wind should be blowing at your back, the reel with the line should be in your hands.

So how to fly a kite? First, you need to slowly move away from your friend at a distance of about 20 meters, while unwinding the leash. Having given the command: “Let go!”, sharply pull the rail towards you. If the wind is strong enough, the kite will soar in the air, and all you can do is watch its flight in raptures. Otherwise, you will have to run around the field a little more until the structure catches the air flow.

How to fly a kite correctly different strengths wind? If it only flies when the person driving it runs, then the wind is too weak. With fairly strong air currents, the flying structure floats in the air with ease, and no additional effort is required. The optimal wind speed for launching a paper model should be 3-6 m/s.

If the tension of the leash thread is too strong, then it should be unwound a little. If the wind subsides, the snake is pulled towards itself. To return the structure to the ground, you need to gradually reel in the rope and go home with a sense of accomplishment.

www.syl.ru

How to assemble a kite: detailed instructions for balloonists

Assembling the finished kite
DIY flying miracle
Flight rules

Is there a better family pastime than flying a kite? Such entertainment will surely make any child take his mind off computer games, and will remind dads and moms of childhood. How to assemble a kite and how to fly it?

Assembling the finished kite

Despite the fact that kites can be very different - from those assembled “on the knee” to expensive sports ones - in general they have a similar design. They consist of the following elements:

frame of two or more slats;
canvas or sail (fabric, paper, cellophane), which is stretched over the frame;
tail - not only decorates the snake, but also plays the role of a stabilizer during flight, which is not the case with all models;
lifeline - a rope or thread with which the kite is controlled;
bridle – connects the handrail to the sail;
reel for a lifeline, usually a small carabiner is used.

How to assemble a kite - instructions for brave balloonists:

You need to take the frame with the canvas and insert the bridle from the front side into the special holes.
Next, a rail is attached to the bridle on the front side.
The hole for the tail is at the bottom, where you need to insert it.

Now he is completely ready to conquer the skies.

DIY flying miracle

No matter how good a purchased kite is, it will never compare to one you made with your own hands. It is enough to spend less than half an hour to create such a miracle yourself and then enjoy watching it proudly soar in the sky. What you will need to make a kite at home:

two wooden slats approximately 40 cm long (you can use pieces of stiff wire and even twigs);
a spool of thread or fishing line, preferably at least 15 m long;
scotch;
black marker;
cellophane (you can cut a large bag).

Both slats need to be marked with a marker exactly in the center. On the second one, put an additional 1/4 mark.
The marked slats need to be placed crosswise on a sheet of cellophane (the first slat is placed on the 1/4 mark made on the second slat). All points of the frame are marked with a marker, then connected along the contour to form the outline of a sail (that is, something resembling a diamond).
Then you need to cut the sail along the contour and glue the cellophane to the slats with small pieces of tape on the inside and outside.
From other bags you need to make a tail, the longer the better, its width should be 3-4 cm. The cellophane pieces are fastened together with tape. The finished tail is tied to the batten at the top of the sharpest corner of the sail.
A puncture is made in the crosshairs of the wooden slats, through which a fishing line (thread) is threaded and tightly tied or taped to the slats - this is how to make a kite at home from improvised materials.

The winged “scaly” is done in 15-20 minutes, and the tail takes the most time. It flies just as well as the store-bought ones, except it makes a little rustling noise in flight.

If you want to make a more complex toy, then the article will help you: How to make a kite at home.

Flight rules

Ideal place To fly a kite - a seashore with a strong wind. In the absence of a sea nearby, any large open area will do - the main thing is that there is no tall trees, power lines and crowds of people. You should not fly a kite near airports or during a thunderstorm - this is a sure way to “attract” lightning.

If the wind near the ground is strong, the kite, picked up by air currents, will fly on its own; you just need to unwind the coil. If the wind is weak, you will have to slowly unwind the reel and ask someone to throw the kite up.

Flying a kite is great fun for both kids and their dads and moms.

www.rutvet.ru

How to fly a kite - assembly, kite control

Who didn't fly a kite as a child? For many of us, this was a favorite pastime, which was not difficult to do with our own hands. We made the simplest paper kites and rejoiced at how our creations flew in the wind. Now in stores you can find the most different models kites, from small children's kites to huge professional ones. And now, having already become parents ourselves, we go with interest to the sports department to buy this bright toy for our children. Let's remember together how to assemble a kite, and in what ways it can be lifted into the sky.

Assembling the kite

Regardless of the level of complexity, all kites consist of a standard set of components. The most important thing in any kite is a strong frame that holds the shape of the structure during flight. It can be made of two or more slats. A fabric made of lightweight material, which creates an obstacle to the wind and allows the kite to float in the air. It is important to know that when launching the kite, it must be positioned in such a way that the canvas is in front of the frame, and the wind hits it. In some kite models, a tail made in the form of beautiful ribbons is attached to the canvas, which is designed to smooth out gusts of wind and stabilize the kite in the air.

The kite is controlled from the ground using a rope or thread, which is also called a lifeline. It should be very strong, but light enough so as not to interfere with flight.

The thread is wound on a special convenient spool. Often kite manufacturers make the ropes with carabiners so that people can release them. The place where the thread joins the kite is called the frenulum. Depending on the number of attachment points, this can be:

A single fastener bridle that requires no mid-air adjustments. The snake is corrected only by its tail.
a bridle with a keel, made in the form of a single piece from a cloth of the same material. Also requires no adjustments during flight
a bridle with two or more fastenings, which involves controlling the kite. To do this, it has a ring that allows you to adjust the flight angle.

How to fly a kite

Flying a kite is easy, the main thing is to choose appropriate place and catch the wind. To do this, we find a large open area land, preferably on a hill, where air currents move from bottom to top. If you are surrounded by trees and houses, it will be more difficult for the kite to rise due to the uneven wind, and it will only be able to stabilize at a height of about 50 meters.

Important to remember:

Never fly a kite under power lines, near highways or airports, or during a storm with thunder and lightning. Even if the place seems perfectly flat and spacious to you, and the wind in a thunderstorm is simply ideal for flying a kite, such games can be life-threatening.
Never fly heavy kites over people or animals. If you lose control, this entire structure with a rigid frame can fly towards a person at great speed and injure him. If you want to play with your children on the beach by the sea, a lightweight paper kite that will not harm anyone is suitable for this.
Wear sunglasses when flying a kite in sunny weather. Being carried away by the game and looking intently at the sky, you may not notice how the bright sun will harm your eyes.
Be sure to protect your hands. Use gloves and a reel. Under no circumstances should you wrap the rope around your hands. A strong gust of wind can lift the kite up, and the quickly unwinding thread will burn your skin.

Before sending your kite into the sky, we position it facing us, stand with our back to the wind and pull the threads. Flying a kite depends largely on wind speed. If the wind is strong enough, the kite can be launched directly from your hands, placing its nose in the wind and slowly unwinding the rope. If the wind is not very strong, you may need help. Spin the reel 15-20 meters, pull the thread and ask someone to throw the kite up. It happens that the wind is weak near the ground, but quite strong above. This is evidenced by the swaying tree tops. In this case, the kite will only fly at a certain height. But in order to raise it to this height, you will have to run a little against the wind.

Carefully monitor the thread tension. If the wind has died down and the tension begins to weaken, wind the thread onto the spool or simply pull it towards you. If the wind gets stronger, the rope needs to be unwound a little, or, for example, you can take a few steps in the direction of the wind. When the kite begins to fall and the situation cannot be corrected, release the rope so that the impact on the ground is softer.

Controllable kite

When you have the opportunity to control the flight of a kite, it is always interesting. But to launch such kites you need a strong wind, since in a weak wind, holding two reels in your hands, you will not be able to run backwards. It is advisable to have an assistant during startup. But you can also cope on your own, although most likely not on the first try.

As the kite takes flight, keep your hands at chest or hip level. Try to pull right thread to yourself. You will see the kite fly to the right. If you pull left hand, you can straighten it or tilt it, respectively, to the left. Movements should be smooth. If you pull the strings, the kite will quickly fall. Do not unwind the thread too much. First get used to the kite's maneuvers. And after a little training, release it higher. Don't worry if the threads get twisted a few times, it won't affect the control in any way.

IN in capable hands the kite can draw different shapes in the air, and also perform tricks such as the figure eight, loop and spiral descent. If you are not yet able to control the kite, do not worry, very soon you will master all the subtleties of flight, and your kite will soar in the air for hours to the delight of you and your children.

bambinostory.com

How to make a kite with your own hands at home: options with drawings and dimensions + photos and videos

It's not just children who love flying a kite. For adults, a fun hobby allows them to return to a carefree time for a short time and feel the joy of flying. You can buy a finished product, but it is much more interesting to make a kite on a string with your own hands. Using available materials and drawings you can easily cope with this task.

Types of kites you can make yourself

In order to make a kite with your own hands, you need 5 things: basic labor skills, materials, drawings, desire and patience. All designs are made according to the same principle: a base with aerodynamic properties different shapes and rope. The kite can be flat and voluminous, simple or consisting of several links.

Kites can be different forms and sizes

Such a thing can be found in a store, but it will be a standard replicated version. It’s better to make a controlled kite yourself, and then fly it and enjoy the result.

The first who came up with the idea of launching a structure in the form of a kite or dragon into the sky were the Chinese. They took up this fascinating business in the 5th century BC.

Flat kite made of paper, nylon or polyethylene

Together with your children, you can make a simple version of a homemade kite called “Monk”.

The simplest paper kite

Take a sheet of thick paper of any color, A4 format. Place the lower right corner to the long left side so that it aligns with the short one. It turns out to be a triangle with an upper single part. Cut it off, unfold the sheet, you get a square.
Mentally or with a pencil, draw a straight line between two opposite corners of the square - mark its axis.
Bend the sheet so that the right and left side the square “lay down” on its axis.
Bend the corners twice upward according to the accordion principle.
Glue a thread 30 cm long into the middle of the accordion on both sides. The result is a “bridle”.
Tie a rope strictly in the center of the bridle to launch and control the kite.

After manufacturing, it is necessary to secure the rope to control the kite in the air

It is impossible to control a snake without a tail, so do not forget to make a rope from ribbons or threads intertwined and tied at the bottom with a tassel.

Make 20 pieces of regular threads or 5–6 from wool. Their length for a small kite should be at least 50 cm.
Place the cut pieces together and tie them with a tassel towards the end or braid them. You can decorate the tail with bows or paper triangles.
Make a hole in the bottom corner of the kite, thread the tail through it and tie it in a knot or glue it.
If you are using ribbons or strips of fabric instead of thread, thread them through the hole, wrap and hem top part to the bottom.

In addition to their decorative and entertainment functions, the first kites in China were used in construction. With their help, ropes were thrown across reservoirs and ravines for the subsequent construction of bridges.

Homemade kite in 5 minutes - video

Paper, fabric and wood construction

Compared to the “Monk”, there are some complications in the manufacture of this kite. In addition to paper, you will need thin wooden slats and fabric.

An easy to make kite from paper, fabric and wooden slats

To make such a kite, prepare in advance:

2 notebook sheets;
3 slats (2 60 cm long, 1 – 40 cm);
durable nylon thread;
colored fabric.

Instructions for creating a flat “Russian” kite with your own hands - video

Diagram of a triangular kite made of polyethylene

Triangular kite - another variety flat design, more difficult to manufacture. But the result of your work will definitely please you. The snake has a classic triangular shape, bright and very beautiful.

A triangular kite is more difficult to make, but it can last longer than a paper kite.

Materials you will need:

plastic bag, better bright and dense;
slats (straight sticks made of bamboo, willow, linden, pine or just window beads);
rope or fishing line with a reel.

The dimensions of the finished product depend on the dimensions of the package and the height of the launcher. Use percentage notation as shown in the diagram. Decide which number is taken as 100%, and then use a calculator to calculate the specific values.

For accurate marking, substitute your values and calculate the parameters of the kite in centimeters

Cut out the “body” of the kite from the bag according to the drawing.
Prepare 4 slats of appropriate sizes: two side slats of the same size, one long longitudinal and one short transverse.
Secure with any glue first the side slats on the sides, then the longitudinal one in the middle, and finally the central transverse one.
Attach a keel in the middle of the kite using tape.
In the center of the bottom of the canvas, cut a hole into which to thread a tail made from scraps of bags.
Tie one fishing line to each corner and fasten them together with a knot.
Attach a fishing line with a reel to the resulting “bridle” for launching and control.

Interesting fact. In ancient times, kites were used for military purposes: for reconnaissance, sending messages or gunpowder into enemy territory.

Drawing of a diamond-shaped product

This design is made according to the same principle as a triangular kite. You will need 2 slats (60 and 30 cm), a plastic bag, fishing line and tape.

Tie the tail to the bottom corner of the kite

In order for a kite to fly well, its tail must be 10 times longer than its base.

Interesting fact. In the 13th - 14th centuries, aerial structures were used to study natural phenomena and weather observations.

You can also use the diagram to make a kite.

A triangle-shaped kite can be made from any lightweight material.

Making your own diamond-shaped kite - video

How to make a bird-shaped design

To get a kite that resembles a bird in flight, use one trick: secure the string between the side parts. Under the pressure of the wind it will either stretch or weaken, making the structure “winged”.

Necessary materials:

8 sticks with a diameter of less than 1 cm and a length of 30.5 cm, 3 sticks of 91.5 cm and 3 of 150 cm from linden or pine;
nylon or polyethylene film;
fishing line;
coil.

In flight, a kite - the bird seems to flap its wings

Place 150 cm long rods parallel to each other in front of you.
Place a 91.5 cm stick across, 59.75 cm from the edge.
Tie it with threads so that there is a distance of 30.5 cm between the first and second, and 61 cm between the second and third.
Retreating 30.5 cm in the larger side, attach a second stick 91.5 cm long.
Tie 4 short slats at a distance of 30.5 cm from each other at an angle so that at the bottom they converge into a triangle (see diagram).
Closed ends short planks cover with the last lath 91.5 cm long. The result is a “manger” tied in the center of the structure.
Tie everything together with threads coated with glue.
Fasten the ends of long sticks that have been previously soaked in water. You need to wet them so that they do not break when bent.
Stretch a fishing line between the ends of the “wings”.
To make the “body” of the snake, cut out a pentagon from fabric (top and bottom sides are 30.5 cm each, height 91.5 cm + 2 cm for the hem). Make a square in the center with a side length of 30.5 cm.
From bottom corners square, measure 59.75 cm to the left and right.
Draw segments from the ends of the top and bottom sides of the pentagon to the resulting points. The result was a canvas with a window in the middle.
Sheath and glue the wooden frame of the kite.
Additionally, cut out 4 inserts for the “manger”. Each size is 30.5 x 30.5 cm. Insert them into the “windows” and glue them.
Make a tail from rope and leftover fabric, attach it to one side of the “manger”.
On the other hand, make a bridle from two fishing lines tied together and tightly tie a thread with a reel (rail) to them.

To ensure that the structure does not fall on one side and does not fall apart in the air, strictly adhere to the dimensions and firmly tie the parts together.

It is problematic to fly such a kite alone, so call your comrades and get a surge of joy from launching the “bird” into the sky.

DIY air raven - video

Volumetric (box-shaped) kites

To create a volumetric kite you will need:

wooden slats (window beads can be used) - 4 pcs. 1 m long and 6 60 cm;
large garbage bags;
a durable nylon harness on a spool from a hardware store;
scotch;
ruler;
square;
scissors;
glue.

A voluminous kite flies high and beautifully, and you can make it yourself

Secrets of a successful launch

You can fly a kite alone, but this requires a certain skill. It’s more convenient and more fun to do it together. One holds a kite, the other a spool of fishing line or thread (rail). The main condition for a successful launch is the presence of wind from 3–4 m/s, as well as open space no trees or wires.

The person holding the rope stands so that the wind blows at his back, unwinds 10–20 meters of rope and pulls it tight.
The second one moves back the length of the rope, runs up and launches the kite. He must seize the moment and pull the rope.
If the wind is not strong enough and the kite begins to lose height or cannot rise at all, the “leerman” will also have to run.

If you want to have a great time and get creative with the whole family, make a kite. Making it yourself is not at all difficult. The spirit of unity, joy and fun will be a reward for the time and effort spent.

A kite is the very first flying device that man was able to lift into the sky and give it movement with the help of gusts of wind. Kites come from China, a country where every holiday was and still is accompanied by colorful images of dragons.

Kites did not always serve as a toy or a beautiful holiday attribute; for example, at the beginning of the 20th century, cameras (for aerial photography), radio antennas, etc. were raised with the help of such devices. Kites can be various types and designs: box, monk and flat.

Rules for making kites

Firstly, there must be a center of gravity on the body of the kite. It is better if it is located on the line that divides the body in half. If the center of gravity is shifted, the kite simply will not be able to rise into the air.

Secondly, the lines with which the aircraft is controlled must be selected to a convenient length and secured in certain places.

And thirdly, don’t forget about the serpent’s tail: it’s not only beautiful decoration, but also the steering wheel. This is why the tail must be well and correctly adjusted.

Basic requirements for a kite

The body of the kite should be made rigid and durable so that the wind does not deform it. At the same time, a flying kite must be light, otherwise it simply will not rise to a height. The ability to easily fold, unfold and transform is also required condition.

How to make a kite

So, what do we need to make our kite fly above the clouds? All the “ingredients” can be easily found at home:

- newspapers or plastic bags;

Wooden sticks 91 and 83 centimeters in length;

Fly strip (or ribbon);

Wood knife;

Strips of fabric.

The ends of the wooden sticks (make recesses in them in advance) need to be wrapped with tape.

On a long stick, measure 25 centimeters on top and tie a second stick crosswise at this distance. Wrap the joint with tape to make it stick better.

Then take a strip of ribbon and wrap the kite so that it goes through all the notches you made. Now seal each recess with a ribbon with tape.

Now the made frame needs to be placed on a bag prepared in advance and cut to shape. After this, secure the cut package tightly to the frame using ropes or tape.

Now let's turn to the slings. Unwind a rope 3 meters long and tie it to the bottom of the kite and to the place where the sticks cross, and decorate every 20-30 centimeters of the rope with bright fabric strips.

If you did everything correctly, then your kite will fly very beautifully and impressively! Happy flying and beautiful kites!

Prepared based on materials from the site podelkidlyadetei.ru

Trembling, alive, he strives upward, towards freedom and the sun, trying to fly out of his hands and break the leash. How to assemble a kite? After all, that’s what we’re talking about!

Surely you read S. Marshak as a child. In one of his works we're talking about about the life of a schoolchild, an important part of which at that stage was kites. Among the boys, it was considered prestigious not only to make the biggest one, which would last the longest in the air, but also the most durable one: after all, real battles were fought! Whose won't fall to the ground?! In addition to the excitement, the practical value of the structure was also in mind: twine and other available materials were very expensive. And the guys, naturally, did not have the slightest idea about the properties of aerodynamics: everything was done experimentally.

Now there are more concepts, but snakes have become rare. Although back in the last century scientists used them for practical purposes: with their help it was possible to carry out meteorological research, raising devices to a height of up to 1000 m. But this is a great way to keep your child busy with a common activity and get closer to him even more! Let's try to revive traditions?

How to assemble a kite at home

First you need to consider: the lighter the structure and the larger its plane, the higher the likelihood that the kite will fly. Therefore, the materials for manufacturing should be light: we will use wooden slats for the frame, and it can be covered with thin paper or foil. For a larger product you will need canvas, polyethylene film(owners about crazy hands Even an ordinary garbage bag) or thin cardboard can be used. All this is held together with threads/string/thin wire. Want to use thread? Be sure to coat them with glue after finishing work!

Agree, the answer to the question “how to assemble a kite” is not so difficult!

Understanding how to fly a kite is almost as important as knowing how to make one. After all, even little birds are taught to fly by their parents, and they have wings from birth!

Selecting a location

A small kite is quite capable of flying in the corridor, like a paper airplane. It is only important to run with it evenly, at the same speed. Tossed up and... forward! For a big flyer you will need space and a light breeze. Choose a place in advance: it can be the seashore, a wide field or a regular stadium. Eliminate possible obstacles and make sure there are not many people around.
Did you have a support group with you? Let them step aside and keep an eye out: getting hit in the face with a construction is a dubious pleasure, and it is better to preserve the memory of the event not in the form of scars, but in the form of photographs.

Safety precautions

Flying a kite

Remember how surfers catch a wave? Yes and you will need to catch the moment when the flyer begins to rise, drawn by the flow of air masses. Gently straighten the structure and untangle the tail. Throw it up and start running quickly against the wind - this gives you initial speed. A properly glued kite will quickly rise up, gradually unwinding the string. Is that what happened? There is no need to run anymore. Enjoy the result!

Nuance: small child At first it will be difficult to launch on your own. Choose a smaller model. Make sure he doesn't get caught in the string and cut his hands with it. The blossoming tail may well whip you in the face - before launching, lay it out on the ground from behind. Ideally, practice in the hallway first.

Did you know?

Skillful Japanese know how to assemble a kite of various configurations. Based on the design hot air balloon, they make strange animals, coat the string with glue, sprinkle it with crushed glass and annually organize real battle shows. The kids of Marshak’s time never dreamed of this! What about your children?

Sections