How to make easy stickers simply with your own hands. How to make colorful homemade stickers

Are you looking for a new one? creative project? Try making stickers! They are easy to make directly from scrap materials you probably already have at home; You can also create professional-looking stickers using self-adhesive paper, which is readily available at any office supply or craft store. After reading this article, you will learn how to make stickers in three different ways: based on glue, using tape or self-adhesive paper.

Steps

Production of adhesive stickers

Come up with a sticker design. At self-production With stickers, your flight of imagination is unlimited. Use whatever drawing medium you want: colored pencils, markers, pastels, wax crayons, whatever. Make sure that the markers, pastels and other drawing media you use are not washed away by water. Draw your sticker design on a separate thin piece of paper or directly on your notepad. As you think through your design, consider the following ideas.

• Draw a self-portrait or portraits of your friends or pets.
• Cut out neat images and phrases from magazines and newspapers.
• Print pictures from the Internet or images available on your computer. For best results, print them on thin printer paper rather than photo paper.
• Use ready-made sticker templates from the Internet that you can print.
• Make pictures using decorative stamps.
• Decorate the image with sparkles.

1. Cut out the stickers. Use scissors for this. Make the stickers as big or small as you like. To achieve patterned edges on your labels, use curly scissors, with which you can create an interesting cut pattern.

   • Try using shaped hole punches to make hearts, stars, etc. curly forms from paper with a pattern.

2. Prepare the glue. This glue is safe for children, similar to what is used on envelopes. It will ensure the sticker adheres to most types of surfaces, but does not contain harmful chemicals. To make glue, mix the following ingredients in a bowl until a homogeneous mixture is formed:

   Apply glue to the stickers. Place stickers, back side up, on a piece of wax paper or aluminum foil. Take a paint brush or pastry brush and brush the backs of the stickers with glue. When finished, let the glue dry completely.

   • There is no need to completely saturate the stickers with glue, just apply a thin layer of it.
   • Make sure the decals are completely dry before using them.
   • Store finished stickers in plastic bag or in plastic box until you are ready to use them.

3. To stick the sticker, lick the back of it. When you're ready to stick your sticker to any surface, simply lick it reverse side, just like you do with stamps, and then briefly press the sticker onto the desired surface. Homemade glue is quite strong, so be careful when applying the sticker.

   Making stickers with tape

   Cut out images from magazines or print them out. own design stickers. For this method, you will need images that have been printed on paper using waterproof ink. You can use glossy pages from magazines or books, or you can experiment with your printer's ink and try printing variations from your computer. If you are printing pictures, make a test print first to pre-wet it to test for durability before you start making the stickers themselves. Cut out the images and phrases you like using scissors.

   • When selecting images, do not forget about the width of the tape. Each sticker must fit within the width of one of its stripes. This means that the picture should be no wider than the tape.
   • If you want to make a larger sticker, you will have to line up two strips of tape. It may not be so easy. You need to align the tape so that the strips overlap just slightly, without the paper showing between them. If you fail, your sticker will be damaged. If successful, only the seam where the stripes touch will be visible on the sticker.

4. Cover the sticker designs with tape. Cut a piece of clear tape large enough to completely cover the cut out sticker design. Adhere it to the front of your cut out or printed design. Press the tape onto the paper so that it adheres well to the drawing.

   • Be careful when applying tape to the image. If you change its position, the picture will be torn. Also try to ensure that no air bubbles or wrinkles form when you apply the tape.
   • Consider using double-sided tape. Double-sided tape is available in various types: in rolls, sheets and even as part of special machines for making stickers, for example, the Xyron brand.
   • Consider using Japanese paper tape (washi tape). It's similar to tape and is great for making stickers because it sticks when you want it and also peels off easily if you need it. Duct tape Japanese paper is produced in various colors and patterns. If you want to make more durable stickers, you can use sealing tape.

5. Rub the front of the sticker. Use a coin or your fingernail to press down on the front of the sticker and rub the surface so that the ink on the paper begins to bind to the adhesive of the tape. Continue rubbing the sticker for a few minutes to ensure the ink binds to the adhesive layer of the tape.

   Rinse the stickers in warm water. Take the stickers one at a time and rinse them under water, placing the paper side under the stream until the paper begins to fall off. The ink will not be washed away by water, and the paper will completely dissolve. You can speed up the process by rubbing the paper.

   • Make sure to wet the entire surface of the sticker tape, not just part of it. If you concentrate your efforts on just one area, then only that area will be visible on the sticker.
   • If the paper does not come off, continue to soak the sticker under warm water.
   • Alternatively, soak the stickers in a bowl of warm water. Submerge the decals completely in water and let them soak for a few minutes.

6. Let the stickers dry. After removing the paper, allow the decals to dry completely so that the adhesive layer of the tape becomes sticky again. Use scissors to trim off the excess tape around the sticker design and then apply the sticker to the surface of your choice.

   Making stickers from self-adhesive paper

   1. Buy self-adhesive paper. In craft or office supply stores you can find paper that has an adhesive layer on one side. It is usually protected by a backing that is removed when the paper needs to be glued down.

   2. Come up with a design for your stickers. Draw stickers on your computer, or use markers or pens to draw pictures directly onto the surface of the sticky paper. You are only limited by the size of the paper. If you want, you can even make an A4 sticker!

      • Design the stickers on your computer using Adobe Photoshop, Paint, or another graphics program. You can simply use photos from your personal album or from the Internet as stickers. When finished, print the images onto sticker paper.
      • If you have a printed photo or design that you want to make a sticker from, simply scan it or download a digital image source to your computer. Process this file in Photoshop, Paint, Word or Adobe Acrobat, and then print it on self-adhesive paper.
      • Draw pictures directly on the post-it paper using pens, pencils or paint. Just be careful not to wet the paper too much, otherwise you may damage its adhesive layer.

   3. Cut out the stickers. Use scissors to cut out the printed sticker designs. You can cut the stickers into simple rectangular shapes, or use special shape scissors to create interesting, patterned edges. Your stickers should be spaced about three millimeters apart on the sheet so that when you cut out one sticker, you don't accidentally damage adjacent stickers.

      • When using double-sided adhesive sheets, simply peel off the protective backing to expose the adhesive layer of the sheet. Place the back of the stickers on the adhesive layer. Press them down until they stick well. Then tear off the sticker with the adhesive layer from the second backing - now your sticker will stick from the back. Glue it to any surface of your choice. You need to apply the sticker immediately since you removed the protective backing from it.
      • You can space the stickers further apart on the sheet to create white borders around the images, or you can cut out the stickers without white borders. People who are already experienced in creating stickers sometimes leave no boundaries at all and cut out stickers with a stationery knife.

Good afternoon.

A sticker is not only fun for children, but also sometimes a convenient and necessary thing (it helps you quickly find your way around). For example, you have several identical boxes in which you store various instruments. It would be convenient if each of them had a specific sticker: drills here, screwdrivers here, etc.

Of course, you can now find a huge variety of stickers in stores, but still, not all of them (and it takes time to search)! In this article I would like to consider the question of how to make a sticker yourself without using any rare things or equipment (by the way, the sticker will not be afraid of water!).

What do you need?

1) Scotch tape.

The most ordinary tape will do. On sale today you can find tape of various widths: for creating stickers, the wider the better (although a lot depends on the size of your sticker)!

2) Picture.

You can draw the picture yourself on paper. Or you can download it from the Internet and print it on a regular printer. In general, the choice is yours.

3) Scissors.

No comments (any will do).

4) Warm water.

Will do plain water from the tap.

I think almost everyone has everything they need to create a sticker in their home! And so, let's move directly to creation.

How to make it waterproof sticker yourself - step by step

STEP 1 - search for a picture

The first thing we need is the picture itself, which will be drawn or printed on plain paper. In order not to search for an image for a long time, I simply printed out a picture from my previous one about antiviruses on a regular laser printer (black and white printer).

Rice. 1. The picture was printed on a regular laser printer.

By the way, there are now printers on sale that can immediately print ready-made stickers! For example, on the website http://price.ua/catalog107.html you can buy a barcode and sticker printer.

STEP 2 - processing the picture with tape

The next step is to “laminate” the surface of the picture with tape. This must be done carefully so that waves and folds do not form on the surface of the paper.

Scotch sticks only on one side of the picture(from the front, see Fig. 2). Be sure to smooth the surface with an old calendar or plastic card so that the tape sticks well to the paper with the picture ( this is a very important detail).

By the way, it is undesirable for the size of your picture to be larger than the width of the tape. Of course, you can try to glue the tape “overlapping” (this is when one strip of tape lies partially on top of another) - but the final result may not be so great...

Rice. 2. The surface of the picture is covered with tape on one side.

STEP 3 - cut out the picture

Now you need to cut out the picture (ordinary scissors will do). The picture, by the way, is cut out to the final size (i.e. this will already be the final size of the sticker).

In Fig. 3 shows what happened for me.

Rice. 3. the picture is cut out

STEP 4 - water treatment

The last step is to treat our workpiece with warm water. This is done quite simply: put the picture in a cup of warm water (or even just hold it under running tap water).

After about a minute, the back surface of the picture (which is not treated with tape) will be well wet and you can easily begin to remove it with your fingers (you just need to gently rub the surface of the paper). There is no need to use any kind of scrapers!

As a result, almost all the paper will be removed, and the picture itself (and a very bright one) will remain on the tape. Now all you have to do is wipe and dry the sticker (you can wipe it with a regular towel).

The resulting sticker has a number of advantages:

It is not afraid of water (waterproof), which means it can be glued to a bicycle, motorcycle, etc.;

When dry, the sticker adheres very well and sticks to almost any surface: iron, paper (including cardboard), wood, plastic, etc.;

The sticker is quite wear-resistant;

Does not fade or fade in the sun (at least for a year or two);

And lastly: the cost of its production is extremely low: one sheet of A4 - 2 rubles, a piece of adhesive tape (a few kopecks). Finding a sticker in a store for that price is almost impossible...

PS

Thus, at home, without having any special equipment. equipment, you can make fairly high-quality stickers (if you get your hands on them, you won’t be able to tell them apart from store-bought ones).

That's all for me. I would appreciate any additions.

Good luck with your images!

The basis of any printing shop is printing equipment. Equipment for the production of stickers is the most popular and in demand equipment in the enterprise.

The simplest device for producing stickers is an electronic scale in a supermarket, which weighs goods while simultaneously printing a price tag. This type of technique is called template technology because it is designed to print only one type of sticker.

At a professional printing enterprise, an order for a large number of Stickers containing several colors in their image are produced on offset printing machines. This is the most common type of technology, differing high quality impression and high speed.

For small print runs, it makes sense to use silk-screening equipment to produce stickers. In this case, the transfer of text or image to the main material occurs from the printed grid ( special form). The paint, being pressed through microscopic cells, remains on the paper in the form of a given pattern. This printing method is called silk-screen printing. High-quality printing of stickers is guaranteed when using no more than three colors.

To produce a minimum number of self-adhesive stickers, you can use simple office equipment. The printer for producing stickers can be inkjet or laser. Paper is used as a base adhesive based type Orakal or Xerox with matte or glossy surface. Color palette It comes in a wide variety of shades, so laser printing can be done in black and white.

We make stickers (Although, it’s better to buy them):

Method one.

First you need to prepare a drawing. You can draw it by hand or on the computer. Stickers self made are unique in their uniqueness, but it will be easier for you to make changes or change the size of the sketch in a computer drawing. You can combine both methods - draw by hand, and then scan or, as a last resort, photograph with a digital camera.

You can print on plain paper. If you use colored, bright paper, the stickers will look more attractive. To reproduce drawings, a regular photocopier will do. Next we glue it with any glue. Of course, you should choose glue depending on the surface on which you are going to glue your drawing. In most cases, regular office glue or PVA glue is suitable. If you have a sticker big size- Wallpaper glue and a roller will do here.

The disadvantage of such stickers is that they are very susceptible to external influences - they are not resistant to moisture, and drawings made with a pen or markers very quickly discolor (fade) or blur.

Method two. An alternative to glue.

Suitable for stickers small size. We create a drawing on paper in an arbitrary way - and as a means of fixation we use double-sided tape, one side of which is glued to the back of the drawing, the second - to the wall.

Method three. Lamination.

To ensure that your decal is less exposed to external factors(dampness, mechanical damage such as scratching and paint peeling) we need to protect the front surface of the drawing. At home, for this purpose it is impossible would be better suited transparent tape. The wider the tape, the fewer “seams” there will be in the drawing. To avoid air getting under the tape, start gluing from one side rather than gluing the entire strip at once. When applying tape, smooth it with a ruler, plastic card or any other object with a hard, even edge.

You can also use a special transparent thermal film for lamination; you can buy it in almost any office supply store. Place it on the surface of the design with the adhesive side and simply iron it with an iron.

Method four. Self-adhesive paper.

The paper you use can be self-adhesive paper or special decorative self-adhesive paper "Oracal". On plain paper We apply the drawing in the usual way. In the case of Oracal paper, the situation is a little different.

This paper has a smooth glossy surface, because an ordinary pen, ink or art paints will be useless here. Draw with gel pens or special markers for glass (permanent) or CDs. There are many more ways to apply images to Oracal, which can be found experimentally. You can, for example, try to make an application with the same “Oracal” in a different color.

Method five.

If you have a printer at home, buy special adhesive paper for the printer at the store. And just print the drawing

If you want to decorate a notebook, magazine or anything else with stickers, you don’t have to buy them. It’s quite possible to make stickers yourself. Don't believe me? Read the article to the end! There are several ways to make stickers from scrap materials.

How to make your own stickers using tape

You will need:

• wide tape;
• scissors;
• Pictures;
• thick oilcloth.

Manufacturing:

• Using scissors, cut out the picture. Remember that the picture should be smaller and narrower in size than the tape.
• Cut a piece of tape so that it is slightly larger in size than the picture.
• Place the picture face down onto the tape.
• Glue the resulting sticker onto the oilcloth.
• Cut the oilcloth along the contour of the tape.

This sticker is now convenient to store, and if necessary, it is easy to stick by simply peeling off the oilcloth from the tape.

How to make stickers with your own hands using glue

What do you need:

• scissors;
• Pictures;
• 1 packet of gelatin;
• a teaspoon of sugar;
• 4 tablespoons of boiling water.

How to do:

• Prepare your image.
• Cut it along the contour using scissors.
• Prepare glue for stickers: mix gelatin, water, sugar in a container in the proportions indicated above.
• Pour the finished glue into a resealable container and store in the refrigerator. After standing there overnight, it will thicken. To liquefy the glue, place it in a container of hot water.
• Apply glue to the back of the stickers with a brush.
• To apply the sticker, it must be moistened with water or saliva.

How to make your own stickers using self-adhesive film

What you will need:

• self-adhesive film;
• Printer;
• scissors.

Manufacturing:

• Buy self-adhesive film.
• Select a picture and print it on a printer by inserting a self-adhesive film. If you don’t have a printer, draw the picture manually with felt-tip pens.
• Cut out the picture using scissors along the outline.
• To apply the sticker, remove the protective layer.

With these simple methods, it’s quite possible to make stickers yourself. The advantage is that you don’t have to spend a long time looking for the necessary pictures in stores. You can choose the ones you like online and print them. Making stickers is interesting option for a hobby, and the process itself is not particularly troublesome and pleasant. Surprise your friends - give them stickers self-made with their names.

How to be in this case?

The first option is to order them from the nearest printing house or design studio.

The second is to do it at home with your own hands. In this article we will examine in detail several ways to make stickers yourself and at a low cost.

Making stickers with your own hands at home - step-by-step instructions

• Method 1 is the easiest: Sticker printed on self-adhesive paper.

Everything is easy and clear here: just buy special paper on a self-adhesive base and print an image of a suitable size on it.

• Method 2: Sticker with a transparent background based on adhesive tape.

This simple method allows you to get a high-quality sticker that is not washed off with water and is very durable.

Make a sticker at home using tape as easy as pie.

All you need for this is a laser printer (an inkjet printer will not work!), plain paper, wide tape and a hair dryer.

The manufacturing technology is as follows:

1. We print an image or text on a laser printer;
2. Glue wide tape over the picture;
3. Place the future sticker in a container with warm water for a few minutes;
4. Under the tap (preferably with warm water), completely rinse off the soaked and sodden paper;
5. Dry the sticky side of the sticker with a hairdryer;
6. Glue onto a grease-free, dry surface and smooth out gently.

• Method 3: Self-adhesive stickers based on homemade glue.

This is a more labor-intensive method compared to the previous ones, since it is additionally necessary to prepare the glue.

For this technology you will need following materials, tools and ingredients: Paper, printer (you can do without it if you draw a picture by hand), scissors, one packet of gelatin (12 grams), a teaspoon of sugar, a brush for applying glue.

The technology for making stickers is as follows:

1. We print the picture on a printer or draw it by hand;
2. Cut out the image along the contour;
3. Prepare the glue. To do this, pour a packet of edible gelatin into suitable container, add granulated sugar and pour in a small amount of boiling water, sufficient to dissolve the components. After a few hours, the mass will take on a gel-like shape - the glue is ready;
4. Apply glue to the back of the future sticker and let the glue dry.

The sticker is ready! Now before gluing it is enough to moisten the sticky surface with your tongue or water and apply it to the desired place.

To make the sticker more resistant to moisture, you can stick transparent tape over the front side.

• Method 4: Stickers based on double-sided tape.

This is another easy way to make stickers.

All you need for this is a prepared picture (printed on a printer, drawn or cut out from a magazine) and wide double-sided tape.

To get a ready-to-use sticker, just stick the tape on the back side.

Now at any time you just need to remove it from the tape protective film, and the sticker can be glued to almost any surface - glass, plastic, wood, etc.

As with stickers without double-sided tape, you can use clear tape to protect the front side.

• Method 5: DIY vinyl sticker.

To do vinyl sticker at home, you need to buy Oracal or Avery film (sold in hardware stores, available in different colors and shades).

A suitable image is applied to the film with a pencil and cut along the contour with scissors or a stationery knife.

Since the film has a self-adhesive base, in order to stick the sticker, it is enough to remove the protective layer from the back side.

• Method 6: Paper sticker made from transparent tape.