How to attach vertical blinds to the wall. How to hang blinds on a plastic window

In summer, blinds become an invariable attribute of a plastic window. Especially if the light of the midday sun is directed directly into the window, you have to look for protection behind curtains or blinds. The thing is, without a doubt, useful and practical. They are easy to use and take up almost no space in the window space. Roll or cassette designs are slightly inferior in popularity to classic horizontal lamella systems or strict vertical fabric sets. The latter, for a number of reasons, have become wildly popular in offices and office premises. Classic curtain widely removed from business style.

Conventional slatted horizontal blinds are much more common in window opening standard sizes, vertical ones are mainly used in rooms with high ceilings and large windows. Roller blinds are preferred for opening plastic windows as “deaf” protection from the outside world - for this they are indispensable. This could be a bedroom or a children's room.

Methods for attaching blinds

Modern designs of fastenings for blinds on plastic windows can be divided into three categories:

• Permanent fastening to the frame using self-tapping screws or self-tapping screws;
• Fastening the blind system to the sash of a plastic window, allowing it to open unhindered in all positions, including in ventilation mode;
• The gentle fastening method makes it possible not to damage the plastic profile by drilling holes.

According to an already established tradition, vertical systems are mounted on any window opening using a baguette pattern, without contact with the glass unit. This is due to the design of the vertical lamellas; their width is most often at least 10 cm, so to regulate light transmission, at least 10-15 cm of space is required between the window and the plane of the lamellas.

In addition, there are increased requirements for appearance vertical blind designs used in office premises. They should be successfully combined with the interior of the room and usually, in addition to plastic windows, cover the window sill and part of the wall space adjacent to the window opening.

The design of such blinds practically allows you to open the sash of a plastic window in no other way than in ventilation mode. Attaching vertical blinds is almost identical to installing a baguette for ordinary curtains, only instead of the latter, a special heavy cornice with a hidden mechanism for controlling the blinds slats is installed.

Rolled options use a powerful and heavy canvas storage system, so almost always mounting on a plastic window is done using additional fittings and canopies. This allows the structure to maintain rigidity and strength when stretching the canvas to the required height.

Both horizontal and roll options blinds are designed for one leaf and are placed with inside window.

Method of attaching blinds to a plastic profile without screws

Most people rightly believe that it is better if the blinds are attached to a plastic window without drilling holes.

The basis of the system is a set of horizontal strips of plastic, aluminum, pressed cardboard or wood connected in a special way into one flexible sheet. A special mechanism for blinds allows you to rotate the strips around a horizontal axis, thereby changing the shaded area of ​​the window opening.

All the secrets of controlling the blinds are hidden in the box-shaped cornice located at the top. It depends on the size and area of ​​the blinds, the width and material of the slats. total weight designs. Fastening standard options Blinds with slats no more than 2cm wide and no more than 80cm long can be quite easily made on the plastic of the window using special double-sided tape.

To glue the blind curtain rod to a smooth plastic surface:

1. We use double-sided tape or glue applied along the entire length of the glued cornice;
2. When gluing, before applying glue to the area plastic frame, it should be thoroughly degreased with acetone or alcohol;
3. Apply one layer of glue to the side surface and dry it for 1 hour. Then reapply glue and secure the cornice. Further operations can be performed after 10-12 hours.

At the bottom of the window, clamps are glued in a similar way to hold the blinds in an unfolded and tensioned state. A control cord or a special bar is threaded into the hole on the cornice, the rotation of which adjusts the angle of inclination of the slats.

Advice ! The use of double-sided tape is a completely justified option, provided that the material used is of high quality.

To compare and check the strength of the connection, try attaching two identical objects to a smooth surface using tape and glue. In the first case, the peeling force will be significantly higher than for an adhesive joint.

Attaching blinds to plastic windows using self-tapping screws

Before starting work, make sure that the height and width of the model you choose matches the proportions and dimensions of the window glass. There are many recommendations on the Internet to use a plastic glazing bead to attach blinds - a narrow, 10mm wide strip of plastic that secures the glass in the frame. Usually the authors motivate the advice by the fact that in case of failure, the glazing bead on plastic profile easy to replace with a new one. It's easier and much cheaper than changing the cladding.

It is easier and more reliable to fasten the curtain rod directly to the main plastic cladding of the window, approximately in the following sequence.

Using a level and a pencil, mark the position of the cornice above the glass of the window so that window glass closed exclusively with slats. We put it in top part cornice mounting earrings. These are elements that serve to fix the cornice body on external brackets; we install them inside the cornice according to the instructions.

We mark the position of the brackets on the cladding and mark with a pencil the places where the holes for the self-tapping screws will be drilled. Using a drill approximately 0.5 mm smaller than the diameter of the self-tapping screw, we drill one hole for each bracket.

For fastening, choose self-tapping screws of the sizes recommended in the instructions, or standard aluminum ones, suitable for Phillips screwdriver. The length of the working part is no more than 12mm. After screwing in one screw at a time, the brackets should be leveled using a building level. Otherwise, the cornice can be fixed with a slope to the left or right.

After that, the remaining holes for attaching the brackets are drilled, and the missing fasteners are screwed in. A cornice is placed on the brackets, the entire necessary fittings blind mechanism. In a similar way, the clamps are attached to the bottom of the window with self-tapping screws, after which the fittings of the mechanism are adjusted.

Important ! When choosing drilling locations, you should not retreat excessively to the periphery of the window; there is a possibility that the drill will bump into hidden parts of the window control mechanism.

Installing blinds on an opening sash of a plastic window

The sash design allows you to avoid using self-tapping screws for fastening blinds of any configuration. In this case, to attach the cornice, a special plastic earring is used, hooked, like a hook, to the upper edge of the window sash. Depending on the length of the plastic window and the weight of the blinds, there may be two or three such “hooks”. The earrings simply “snap” into the body of the cornice, firmly held inside it due to the elasticity of the plastic. Next, the cornice is simply hung on the window sash.

It should be noted that similar method fastening is the most universal and allows you to painlessly remove the blinds from the window and mount them again an unlimited number of times.

The disadvantages of such a fastening system include:

• The fastening earring pinches rubber compressor sash, with prolonged use this can lead to partial pushing through of individual fragments of the seal and loss of tightness;
• The plastic fastening is inferior in strength metal brackets Accordingly, the service life of such fastenings is significantly shorter;
• When attaching blinds, a limiter for the opening angle of the sash should be provided to prevent possible damage by the blind lamellas to the inner surface of the window slopes.

Ten years ago, blinds were considered exclusively an office window decoration item. But recently the lamellas have changed, new design options have appeared. Designers began to use bamboo, linden logs, cherry wood and fabrics as production materials. It has become fashionable to select models for furnishing houses, apartments and public premises. When turning to a salon or specialized store for help, you will receive competent advice from a sales consultant on installation, care and selection. If you are going to install blinds on your windows yourself, read our article in detail.

You need to know this in advance before installation!

To ensure that the blinds last a long time, try to install them carefully. If you understand the details in advance, the installation process will not take much time. The main thing is to take into account the models, installation method and take this into account during assembly. If you will be attaching window blinds directly to the wall, you need to make sure that its surface is perfectly flat.

Important point! When purchasing, be sure to check with your consultant whether all parts of the mounting set are included in the kit. There are situations when purchasing additional mounts is inevitable. It's better to take care of this in advance.

Blinds can be attached in one of four ways:

• to the ceiling;
• to Wall;
• inside the window opening;
• for each window division.

It doesn't matter which option you choose. It all depends on the individual preferences of the client. Installed on double glazed windows various forms. But the method of fastening is selected individually. The sequence of steps is approximately the same, but there are some distinctive details.

Universal step-by-step steps for installing blinds

1. Many are sure that models sell standard size and neglect preliminary window measurements . We would like to warn you: take the time to measure the height and width of the window opening.
2. Be sure to note that the length of the slats should be two centimeters shorter than the length of the window. If you envisage the option of attaching the structure to the wall, then the canvas should cover the window fifteen centimeters on the right and left.
3. Next, mark the fasteners. Make sure that there are no difficulties with the operation of the mechanisms and that they will easily allow you to open the window.
4. Using the markings, attach the necessary parts to the base. Dowels and screws are screwed into the wall or ceiling. Sometimes directly into the glass unit. Next, a cornice is hung on them, which holds the structure.
5. As soon as you finish installing the blinds, check their mechanism.

Installation of blinds on plastic windows

Installation of blinds on plastic windows is a common occurrence. Most modern double-glazed windows are made of plastic. This brittle material, so you need to work with it carefully. Now we will look at installation options where drilling is used:

We install vertical blinds on plastic windows

This is one of the common types. Functional Features, wide color palette, ease of care and color combination attracts buyers. That's why it's common in offices and public organizations. Installing vertical blinds will not take much time.

1. It is necessary to make markings for fastening the elements.
2. Next, attach the brackets and cornice.
3. Place runners on the cornice and attach lamellas to them one by one.
4. Attach weights to the control handle.
5. Check the operation of the structure.

Vertical blinds mounting diagram
For detailed instructions on installing vertical blinds, watch the video below:

We install horizontal blinds on plastic windows

In most cases, horizontal slats are attached to the wall. They are able to close the window opening completely, but at the same time they look aesthetically pleasing and do not “squeeze” the space of the room. There are times when they are mounted to a window. Here, the lamella parts are attached to each sash separately. Installation system horizontal blinds no different from vertical options:

1. We mark the places for fastening.
2. We attach the brackets.
3. We put a cornice on the brackets.
4. Checking the length.
5. We check the installation and operation of the mechanism.

To make sure the steps are correct, watch the instruction video for installing horizontal models.

We install blinds on plastic windows without drilling

If for some reason you do not want to drill a wall or a double-glazed window, you can use tape or special brackets. There are L-shaped brackets that are attached to the surface of the glass unit without drilling. They are easy to install and dismantle thanks to a simple latch. But, they are attached only to those doors that open. To attach the brackets to a closed sash without drilling, use double-sided mounting tape.

Thus, with the help of L-shaped brackets and tape, you can maintain the integrity of the window profile. Fastening with adhesive tape is less reliable than others, but if you do not overload the structure, it will last a long time.

We install roller blinds on plastic windows

Roll models are installed in almost the same way as vertical ones. One of the most available options installation of blinds - on two brackets, which are secured using self-tapping screws.

1. We make markings for the details.
2. We fasten the brackets with self-tapping screws (make sure that they are at the same level, otherwise the blinds will hang crookedly).
3. Next, we attach the cornice with the canvas.
4. We check the operation of the structure.

Mounting diagram for roller blinds
For more details on the nuances of installing roll models, watch this video:

Installation of blinds on wooden windows

Modern models are attached to wooden Euro-windows and old Soviet ones. It’s worth noting right away that when installing on old-style windows, you need to carefully take measurements.

Please note: the glazing bead on wooden Soviet windows should not protrude beyond the plane of the frame!

Among suitable models For wooden windows: isolight, isotra, roll and rollite. These are universal models. They fit harmoniously into the interior design, regardless of its style. Are different simple mechanism management and high performance.

One of the most complex installations on wooden double glazed windows– fastening to each section. All the necessary parts are included in the headset. Installation principles are the same as for plastic ones: using brackets or screws. If you are not afraid to make a hole in the glass unit, you will be pleased with the result. With the help of fastening with screws, the structure will last a long period of use.

Mounting to brackets is considered less reliable, but it has a huge advantage - no holes in the glass unit. When you want to remove the blinds, there will be no defects left on the window.

We install blinds on wooden windows

Let's take a closer look at the option using drilling and fastening with screws.

1. First you need to make markings for each of the fastening elements.
2. Make sure that the structure does not interfere with the opening of the window sashes.
3. Make holes for the screws. Install screws and dowels.
4. Attach the curtain rod to them.
5. Install another fastener at the regulating thread to relieve the structure from accumulating load on that area.
6. Attach the runners and slats to the cornice.
7. Check the operation of the structure.

Self-tapping screws make it easier to attach the cornice to the window. Self-tapping screws will not cause any harm to the window profile, but work carefully during installation. If you want to remove the slats after a while, no problem. After dismantling the structure, the holes are filled with special silicone glue white– and not a single trace of the screws will remain.

Good to know! To begin with, it is better to drill holes according to the markings, and then mount the parts. Screwing in self-tapping screws individually is one of the causes of cracks. And this installation method guarantees the integrity of the plastic.

When the holes are prepared, the brackets are carefully screwed to them. Then the cornice is installed and closed. The following steps are required:

1. Install the hook into the control mechanism.
2. Install the cane.
3. Attach the tip to the cane.
4. Secure the thread with a knot.
5. Check the operation of the blinds.

Installing the lamella structure is not difficult if you follow all the requirements and work carefully. Also read the installation instructions, which are included with any model.

Installation of blinds on windows or doorways not at all complicated and can be done by the customer himself if he has at least minimal skills homework. Moreover, there are detailed instructions– how to install light protection yourself. However, in order to avoid any defects in the product or incorrect operation in the future, it is better to entrust the installation of blinds to experienced professionals. Almost all manufacturing companies provide the service of installing their products at the customer’s site. We also offer installation of louver structures.

Installation of horizontal blinds

This product is supplied to the customer with top and bottom mounts. The first ones are designed to attach blinds to a window sash or wall. The latter are present only when the product is attached to the sash itself and serve as a kind of retainer for the canvas when the window opens vertically or horizontally.

First of all, the master will use tools to mark the places for future drilling. In this case, in the “leaf fastening” option, an experienced professional will definitely place the technological holes so that the drill does not get into the metal reinforcement inside the PVC profile. In addition, he will accurately measure the installation point of the lower fastener, completely unrolling the canvas and making sure that it is taut and not hanging loose. When installing blinds using the “window opening” or “on top of the wall” methods, there is no need to install a lower holder.

Installation of vertical blinds is somewhat similar to the process described above. First, the master will determine the exact location of the cornice, which may be in the window opening or outside the window, including on the ceiling. Then the cornice is attached to the fastenings using special latches. After which the slats are tucked into it - they are hung from the runners by special elements - slats, strictly observing the sequence in which the individual elements were in the roll, especially if the blinds have any decor on them.

Installation of roller blinds

Roller blinds, also known as roller blinds or roller shutters, purchased at Lately wide popularity. They are made from a special material that resembles textiles in appearance, but is not inferior in practicality to modern plastic. Installing such light protection on windows is also not difficult. Included with these products are special fastenings that resemble compacted double-sided construction tape. Needs to be removed from one side protective film and apply the adhesive surface to the frame or wall. Then the protective layer is removed from the second side of the tape to which the blinds are glued. This procedure takes literally a few minutes and can be performed independently by the customer. At the same time, in order to avoid problems with the future operation of the structure, we recommend entrusting the installation of the product to an experienced professional. Moreover, before starting installation, you should carefully determine the location of the tape, because it will be impossible to move it to another place later.

Installation of “complex” types of blinds

Pleated, multi-textured, tulle - should also be entrusted only to a master with extensive practical experience in this field.

Just 10-20 years ago there was no choice of window coverings - only massive curtains and curtains were hung on the windows. Progress does not stand still, and in last years New types of window curtains are appearing. The most popular now are blinds. In apartments you can often see a combination of blinds + Roman blinds and blinds + curtain. This method of curtaining protects the home from the sun, street noise and can decorate the window. Increasingly, instead of heavy curtains and blinds, compact roller blinds and blinds are used in everyday life. They fit much better with metal-plastic window frames. They are used in both offices and residential premises.

Types of blinds

Designers bring to life a variety of solutions that have no analogues. There are the following types of blinds:

• plastic;
• wooden;
• fabric.

Installing blinds on a plastic window is a job that requires preparation. The installation process will depend on the type and shape of this product. Note that blinds are classified according to their shape:

1. Horizontal.
2. Vertical.
3. Rolled.

Horizontal ones are most suitable for living spaces. They do not take up space under the windows and can be mounted both inside and outside the sash. Can be combined with curtains different sizes and styles.

Vertical blinds look better in office spaces. Their peculiarity is that they can be attached directly to the ceiling. They can visually increase the space and are suitable for rooms with low ceilings.

Roller blinds have a wide palette of colors and can decorate any room. Made from fabric, they are easiest to clean from dust and dirt. There are several ways to attach them.

In the CIS, you can most often find blinds made in China, Belarus and Russia in stores. Since the majority of the population has plastic windows, especially in cities, it is necessary to study information on how to install them correctly. Let's consider several options for how to attach them to windows with your own hands, so as not to damage the window structures.

Standard installation of blinds on plastic windows

Blinds can be attached different ways. It can be:

• installation by drilling;
• using double-sided tape;
• using magnets;
• using brackets.

When purchasing, instructions are included on how to hang blinds on plastic windows yourself. Mostly advice is given on how to install them by drilling windows. In this case, the fastening is carried out to the window frame above the double-glazed window. You need to carefully study the instructions and carefully take measurements.

Installation of blinds is carried out in the following ways:

• into the opening of a plastic window;
• onlay;
• for each half of the window separately.

Important! Before purchasing blinds for two window halves, make sure that the lifting mechanism is on the left and on the right side. Otherwise, the cords from different halves will interfere with each other.

Installing blinds on windows using drilling is not suitable if you plan to change the type of curtain. After drilling, marks will remain on the window profile, and this will be noticeable. Blinds are attached with screws, and at the moment this is the most reliable type of fastening.

Let's take a closer look at how to hang horizontal blinds on windows. The process can be divided into the following stages:

1. We retreat 5-6 cm on both sides and mark the location for attaching the blinds. At this stage, you need to measure the distance very accurately, since if there is an error of even a couple of millimeters, your blinds will hang askew and will soon fail.
2. We make holes for the brackets with a screwdriver, paying attention to whether the window sash will open or not. If the window will open, then the hole is made in the upper part of the window sash; if it is blind, then on the outside.
3. After inserting the blinds into the brackets, just snap them into place.
4. On the side of the sash you need to make a hole for the latch.
5. Check how the mechanism works and whether it is comfortable for you.

Vertical blinds are a little easier to install; the following procedures should be followed:

1. We make markings for the brackets, retreating 10 cm from the edge of the cornice.
2. We drill holes and insert dowels into them. After this we fix the brackets.
3. We install the fasteners together with the slats on the cornice.
4. We assemble the runners, fasten them into the canvas, and then attach weights to the bottom of the slats.
5. You can check the operation of vertical blinds.

The brackets can be glued with double-sided tape if you do not want to spoil the window profile. If after drilling the window there are excess holes left, they can always be removed with acrylic sealant.

If you purchased roller blinds, you can use another installation method to install them.

Alternative types of installation

It is not necessary to drill into the window to attach the blind base. There are other options for attaching blinds to windows. To install roller blinds you will need the following tools:

• Double-sided tape;
• liquid Nails;
• scissors;
• ruler or level.

Roller blinds are a smooth canvas that can be rolled up, raised or lowered using a special mechanism. Roller blinds do an excellent job of protecting from scorching sun rays, while at the same time decorating the living space. Let's look at how to attach roller blinds to plastic windows. This type of curtains is attached separately to each window sash. Roller blinds come in several types, and the mounting method for each type may vary.

The Mini roller system is a classic roller blind on a compact shaft. They can be easily installed on individual plastic window sashes. The fasteners are attached without drilling, and thanks to this the frame remains intact. To prevent the fabric from sagging, the lower metal rail should be fixed using special magnetic holders. The window sash can be opened in any way.

Roller cassette curtains are roller blinds that are assembled into a cornice that looks like a compact cassette. This type of curtain is suitable for flaps, plastic or aluminum. The most popular curtain options are the Rollite and Uni systems. Models of these designs include strips for double-sided tape. Using these strips, the guides are glued to the window sash.

Cassette blinds are controlled by a single chain, with the help of which the height of the curtain is adjusted. On window frame a special clamp is installed that keeps the chain from sagging when the window is ventilated.

Isotra and Isolite systems are also popular. A plastic window with this type of blinds can be used in any mode without fear of breaking the system. Fastening is carried out using glazing beads, in which small holes will need to be made. If such glazing beads become damaged, they can be easily and quickly replaced at any time.

Interestingly, the method of attaching blinds to the wall is still used. This type of installation does not harm the plastic window; you just need to take the correct measurements.

Marking before installation

In the question of how to hang blinds on plastic windows, one of the main points is the correct measurements of the window and the design of the blinds. You need to take measurements before going to the store. The main thing is to comply optimal distance along the edges of the markings, armed with a ruler and pencil. It’s even better to mark it on the window itself with a pencil using a level; in this case, you don’t need to rely on your personal feelings and measure by eye. The fasteners must be marked symmetrically on all sides. When installed inside a window opening, our design should not reach 3 cm. When installed on top of the window, it should protrude no more than 5 cm at the edges. The height should be 3-4 cm higher. It is necessary to ensure that the blinds do not extend beyond the boundaries of the glass.

It happens that the fastening plates do not fit tightly to the window profile. In this case, special pads are used, which, depending on the gap, are used in different quantities - from one to four pieces.

You need to measure the height and width of the window along the light opening to the edge sealing rubber bands. Then measure the depth of the bead from the glass to the outer surface of the profile. It is necessary to take into account the presence of window fittings so that they do not interfere with the operation of the blinds. If you take incorrect measurements, unnecessary sunlight will shine through the cracks in the blinds.

To attach horizontal blinds made of plastic, the Holis and Magnum system is used.

Before installing blinds, you need to prepare window openings. They must be smooth and clean. Ideally, they need to be degreased.

Remember, with the slightest error in measurements and installation of fasteners, there is a great risk of damaging both the windows and the structures themselves. Installing blinds with your own hands should be treated with greater care and attention, as this is a very painstaking job.

How to choose blinds

When choosing blinds for your apartment, you need to carefully select the material, color and texture in order to harmoniously fit this type of curtain into the living space. If you have a glazed balcony, then plastic or aluminum blinds will be the only right solution for balcony windows.

An important advantage of blinds is their compactness, heat and sound insulation. When using this type of curtain, your window sill is freed up. You can save a lot on energy consumption, since blinds protect your living space from excess sunlight and warmth. In summer, the air conditioner will operate in a more economical mode. Now you can purchase structures not only from plastic and aluminum, but from bamboo and wood.

Vertical blinds are often treated with special dust-repellent solutions. This design can be rolled up and washed in washing machine or with your hands.

Enough interesting view for interior decoration for pleated curtains. Pleated blinds are made from pleated fabric and are attached directly to the window. These curtains are closed using a cord.

The most refined and expensive look wooden blinds. Wooden plates do not rattle, have a natural structure, protect the room from light and do not heat up. They enhance the room and fit into any interior, suitable for both offices and bedrooms. They are made from Canadian linden and balsa wood varieties.

You can also choose multi-textured blinds - a combination of plastic and fabric. Vertical plastic blinds they are made curly, because of this the entire room is filled with various reflections of light. They look like curtains made of airy fabrics.

A new product on the market is photo blinds. Any design can be applied to the white slats, and when the blinds are opened you can admire the beautiful picture.

Japanese curtains are a combination of several fabric panels made of fabric or plastic. They move along the cornice with different guides and can move and slide apart.

You can always change the look of your windows by buying new blinds - and you have a new room without renovation. Carefully choose the color of the curtains, paying attention to the colors of the furniture in the room.