Ideas for decorating a room using paper butterflies. DIY paper butterflies on the wall Model of butterflies on the wall

Often many people have the idea to change appearance your apartment or at least refresh it without putting a lot of effort into it. Usually this means at least cosmetic repairs.

However, in order to give the room an updated look, without incurring exhausting, repair work, this issue should be approached creatively.

It would be nice to remember one wonderful way of decorating - creating decorative panel. And in in this case A simple option for decorating walls with butterflies can come to the rescue, using templates or stencils.

If you put in a little effort and effort, then, undoubtedly, ordinary walls will have a stunning view and the room will take on a completely different, fabulous look.

To do this, you need to study the basic methods of decorating walls. What's so amazing about the decoration? This is an applique, or more precisely, a DIY panel of butterflies on the wall. To make it, a variety of materials are used. Later it is mounted on walls in elegant compositions.

How to make a butterfly stencil with your own hands? For making small moths on the walls there is different variants using materials for cutting butterflies different sizes and based on these parameters, the final appearance of the decoration will depend. Anyone can make paper butterfly templates with their own hands to decorate the interior..

The more you try, the more impressive you will make an impression on everyone who sees such an application. That's why choose the appropriate decor, and then attach the butterflies to the wall. Imagine that on the wall, for example, many openwork butterflies scatter from the center. All of them are of different sizes and colors, twirling in a round dance and vibrating with their wings.

Undoubtedly, this will attract attention and delight, although the butterflies will not be dried, but made from scrap materials.

Important! Butterflies should be highlighted against the background of the wall, and for this it is better to make them bright. This way they will not blend into the interior.

To decorate the wall, butterflies of various sizes, shapes and colors, cut along the contour from paper - the most suitable material. The implementation of such an enchanting spectacle will depend on many factors, the main one being sketch quality and accuracy.

The pattern of openwork butterflies for cutting out of paper should be cut out very carefully.

DIY butterflies on the wall, photo

What to pay attention to when creating butterflies

Firstly, you need to decide on the form. If on this matter own ideas are missing, then you can search for offers on the Internet. There will definitely be templates and stencils for cutting, as well as examples of finished work. You can also watch the creation of such a panel in the video:

Secondly, you need choose color future butterflies. After all, the design of any apartment is individual, so it is so important to take time to select the appropriate color option for the future decor of the butterfly on the wall. Use the most successful combinations flowers, then the decor will best fit into the room and will be in harmony with all the elements.

The shape deserves special attention. Today, ready-made multi-colored butterflies are offered in the form of stickers. They can be ordered at any store. They come in a wide variety of colors, as well as simple and intricate shapes. But we are looking at decorations that are made independently, so for beginners it is worth familiarizing yourself with the basic recommendations.

Butterfly stencil on the wall - diagram, photo

At the initial stage, you should create a sketch of butterflies for cutting. Using a program that draws or edits images can help with this. Subsequently, based on the sketch, butterfly stencils are made for cutting out in different sizes from the appropriate material. Templates can be made without even using a computer.

You just need to take a pencil in your hands and create sketches on plain paper or tracing paper - the outlines of butterflies and then cut them out.

Advice! Nai the best option- do not use strict symmetry. And for this you should try not to mirror the wings. It's best to depict them a little different in size - literally just a little.

Thanks to this, decorative butterflies on the wall will be more voluminous and dynamic. A the applique will look great, regardless of the method of attachment to the surface. But you shouldn’t bend it too much, because the wings should be moderately different from each other.

Stencils of simple butterflies for wall decor, photo

Once the butterfly drawing is ready for cutting, you can move on to the next steps.

It is necessary to decide on the format of the future decorative element, the number of butterflies, as well as the method of securing them. Then you can modify the image and make it in several sizes, and then print it. You can also draw everything completely by hand if you don’t have a printer and cut it out.

After this, we make a butterfly stencil for cutting. It won’t be so difficult to do this if you put the printout on a sheet of cardboard - and the outline of the butterfly is ready for cutting.

The printed butterfly silhouette is first trimmed along the outer edge, only then can you proceed to the inner holes and cut them thin where necessary nail scissors or a special knife.

Butterfly stencils for the wall made of paper - photo of the cutting process

To decorate walls with butterfly decor, you can also use an option such as origami. You will not need to spend effort on drawing the silhouette of a butterfly for cutting out of paper, but will only have to learn the ability to assemble origami.

Important! You should not achieve the grace of a butterfly by increasing the number of folds or frills on the wings: openwork butterflies look more airy.

Further cutting with scissors or a paper cutter will be meticulous and the many details will quickly tire you.

In fact, creating such elements is not very difficult. There are quite a lot of ready-made training videos on the Internet on how to make butterflies on the wall, as well as lessons on making origami. Here is one of them:

Features of fastening elements

When you have already cut out the moths using a stencil, you can begin to create a pattern on the planned surface. Worth a look first various options on the Internet if your imagination has exhausted itself.

Most often, if a person decides to create such an element of room decor, he already has his own assumptions about the location of the pattern itself on the plane. The most popular are images of a vortex, a growing flow, the arrangement of blanks in a chaotic order, in the form of creating a decorative pattern, and so on.

Important! By attaching butterflies to the wall, you can highlight the boundaries between certain areas in the room.

The main thing is to comply correct placement moths and do everything possible to prevent them from getting into the wallpaper pattern.

Original decor - butterflies on the wall, photo

For colored wallpapers (with ornaments and a repeating, pronounced pattern), it is preferable to make the butterflies monochromatic (black or snow-white coloring is ideal); for monochromatic wallpapers, the palette can be expanded and silhouettes of butterflies can be cut out from bright rich flowers.

When the workpieces are cut and prepared, you can begin to attach it. Before you start doing this, you should recreate your idea on paper to understand how good it will look after implementation. Next, you need to mark with a pencil on the wall the places where the butterflies will be located.

All marks should not be made boldly, so that later the butterflies can be removed without leaving marks on the walls.

To attach these elements to the wall, you can use glue, pins, or hang them on a strong thread.

DIY wall decor with butterflies, photo

Materials

When decorating the interior with butterflies created by yourself, you can choose various bases for this:

• cardboard;
• textile;
• vinyl film;
• paper.

You should choose any of them based on the complexity of the picture you have in mind. Paper is the most accessible base of all listed, plus it is the easiest to cut out blanks from. White sheets can be colored to create colorful butterflies.

However minus of this material is that it is fragile. It can be selected if you want to attach butterflies for a short time.

Cardboard is a stronger base. You can choose double-sided and create plain blanks. Butterflies made from vinyl films look beautiful. This decoration will delight the eye with its bright colors and glossy surface.

To create a “warmer” look, you should give preference to fabric, but they won’t be able to stick to anything except glue.

If you prefer the vinyl version, you should fix the butterflies in the middle of the body, so that at the slightest air flow they begin to move their wings. Then the spectacle will be simply amazing.

When choosing hard cardboard for making butterflies, if you try very hard, you can give them various shapes. In addition, such applications will delight the eye for a long time and will not lose their unusual three-dimensional 3D shape.

Anyone who wants to make voluminous paper butterflies with their own hands will be satisfied with the result. Although this method changing the interior is not easy and takes a lot of time, the emotions that you will receive after completing the work will be truly unforgettable.

Read about how you can make it yourself: no less original decor, which can be successfully supplemented with paper butterflies.

The process of creating such an application is very exciting and is guaranteed to make your room original without any renovation work.

See a selection of photos of interiors decorated with artificial butterflies - an incredibly beautiful sight.

What to do if you are tired of decorating a room, but there is no money or energy for repairs? The fastest and least expensive way is to change textiles and decorative elements. Moreover, not all decor needs to be purchased. For example, decorative butterflies will help add an element of lightness. They are used to make panels and wall compositions. Larger and brighter ones “live” on curtains or flowers.

What are they made of?

Butterflies on the walls are made from different materials, sometimes even exotic. The spring appearance of the resulting decor depends on this choice. While you have no experience and you don’t really imagine the end result, you can make several different decorative butterflies for testing. They can be attached to the location of the planned decor. This will make it easier to evaluate the effect and choose the most suitable option.

Paper

Butterflies for decoration from paper are the easiest and cheapest to make. There are a few various techniques. If the product is flat and is glued entirely to the wall/panel, only the front surface is important. If a three-dimensional composition is intended, the paper should be double-sided - both sides should be colored, because the white “wrong side” often spoils the impression.

Instead of regular colored paper, you can use corrugated paper. The effect will be different - it is lighter, airier, translucent, with its help it is easy to make the decor with butterflies three-dimensional.

Butterflies for decoration made from corrugated paper are airy and light

You can make butterflies from an old magazine, newspaper, postcards, colored napkins, wallpaper of a suitable color, or any other printed material.

As you can see, there are a lot of options just from paper. If you consider that they can still be slightly tinted, combined, made multi-layered, it is clear that there is huge scope for imagination...

Cardboard

Cardboard is not very dense. It's more like a very thick paper. It is also colored and double-sided. It is often used to create voluminous decor - you can easily bend the wings relative to the body. This material even holds its shape better. Just remember that you can’t make corrugated wings - the material is too hard to make a small fold.

It is also easier to make openwork butterflies from cardboard. Having a sufficiently sharp knife, cut out the “extra” leaving only the partitions. Such decorations require perseverance, great patience and accuracy.

Cardboard is also used to make templates for “mass” production of identical butterflies. With the help of such stencils you can make insects of the same type and size and spend a minimum of time on it.

Textile

Having a template, you can make butterflies for wall decoration or a fabric chandelier lampshade. The fabric will need to be given additional rigidity, but the rest of the process is not much different: the outline is applied, cut out, decorated if necessary, and mounted on the wall.

It is more difficult to work with fabric, although the results are very interesting. decorative crafts. This is an option for more advanced decorators and needlework skills or sewing machine. With their help you can recreate the veins on the wings.

Exotic materials

Old vinyl records will also be an excellent raw material for making butterfly decor. Since vinyl is hard, you will have to heat it in the oven to cut a butterfly out of it. And in order not to spoil the baking sheet, you need to cover it with foil.

An outline is applied to the vinyl using chalk, the record is placed in a preheated oven, as soon as it begins to soften, it is taken out and quickly cut along the outline with scissors. Often the “workpiece” has to be heated several times. After cutting, heat it one last time and give it the desired shape.

Beer cans or any other relatively soft sheet metal also make excellent flying beauties. First you need to cut off the bottom and lid and level the piece of tin. Then, using an awl, transfer the contours from the template to the sheet metal, connect them with a marker and cut along the resulting contour.

Even beer cans can be used for “butterfly” wall decor.

You can decorate the back - the shiny part. To do this, you will need markers or felt-tip pens; you can try decorating with nail polish. The painted beauties are given the desired shape. One caveat: the edges are very sharp, you need to work carefully, otherwise cuts cannot be avoided.

How to make outline butterflies from paper

Let's start with the simplest, but most effective - contour butterflies. You will need colored paper or magazine pages, outline maps, etc. You can use old postcards or colored cardboard. You will also need regular cardboard to cut out the template.

These are contour butterflies for decoration - they are easy to make and look great

Preparing the template

We take a piece of cardboard - any kind, you can even use some kind of packaging (tea, breakfast cereals, cereals, etc.) the main thing is that the cardboard is dense and not porous. Find a butterfly silhouette that you like, transfer it to cardboard and cut it out. There are several silhouettes in the photo gallery. They can be printed, then cut out and transferred to cardboard.

A butterfly on the wall - it would be nice in color. The swallowtail is attractive with its “tail,” but the paper consumption is greater and the work requires more accuracy. Paper butterfly templates for interior decoration are made in half. The second is obtained “automatically” after unfolding a piece of paper folded in half

Some tips for working with templates. Many butterfly contours are given with two wings, but it is better to cut off one wing - you will definitely get it symmetrically.

Jewelry made from winged insects different sizes. Therefore, the same contour can be enlarged or reduced using the simplest functions of graphic editors - the same Paint, which is available on any computer. Since in this case only the outline is important, the quality of the drawing is not so important, so feel free to experiment with sizes. We cut out the printed template, apply it to cardboard and trace it. We cut it out and get a hard working template with which you can make dozens of identical elements.

Cut and attach

Take a sheet of paper, fold it in half, attach a template, and trace it. Cut along the drawn line. Next, we bend the wings away from the “body” and get a workpiece. Having cut out a certain number of butterflies, we attach them to the chosen place - on the wall, a piece of cardboard, etc.

You can attach it with regular glue (PVA is usually the best option), or small strips of double-sided glue. You can use wallpaper glue, etc. If you are in doubt about the result, stock up on sewing pins. They can be mounted on the wall several times without much risk of damaging the surface. When you have placed all the butterflies and you are satisfied with the result, you can glue or use tape.

Openwork

The situation is a little more complicated with openwork butterflies. They are made from paper or cardboard. It is important to have a good sharp knife and a template with lines marked on it along which you will need to cut out the excess paper. It should be said right away that this is painstaking work.

Patterns of butterflies with openwork wings - a variant of medium complexity The second half is symmetrical

The process is the same as described above: prepare a template, then cut out the required number of elements from it. The peculiarity is that they first cut out and remove small fragments, and then cut out an outline from a piece of paper. With this sequence of actions, there is less chance of breaking thin jumpers, and it’s easier to work this way.

How to make an openwork butterfly from paper - the process in pictures

You need to work with a knife with a thin and sharp blade. It’s better not on the table, but by placing something quite hard - maybe a piece of plastic, etc. But you need to understand that grooves and cuts will remain on the surface, so it will be problematic to use this piece for any other purposes.

Multilayer volumetric

When making multilayer volumetric butterflies, several pieces of the same shape are cut out (size and color may vary). They are stacked one on top of the other, the “bodies” are glued together, and the wings are folded under different angles. This is how these butterflies turn out to be more voluminous.

You can make a combination of openwork and contour butterflies. Take paper of contrasting colors or find one color, but different shades. Make them into butterflies of the same shape. Only some will be with openwork, others - without. Arrange them by placing a fragment without a pattern underneath. It turns out to be an interesting effect.

There is a technique that allows you to immediately cut out three-dimensional butterflies from paper. You will need two rectangles of paper - a larger one (for large wings) and a smaller one. We fold them diagonally once, then a second time. The result is two triangles of different sizes. Now we bend the paper inward from two opposite sides so that we get a triangle like in the third photo (with the newspaper).

Draw wings on the resulting triangles. In larger ones, the openwork can be located only along the edge, in smaller ones - over the entire area. We cut out the blanks and put them one inside the other and glue them together. On top we glue a separately cut out “body” with antennae. Due to the fact that the paper is folded and the wings are double, the products have a larger volume.

Corrugated paper

It is easier to work with corrugated paper and butterflies for decoration are more airy and light, since the paper is translucent. We select suitable colors, take threads, scissors, glue. Nothing more is required. We cut out rectangles of approximately 7*10 cm from paper.

We sew the resulting rectangles in the middle with a needle and thread, tighten them, and make a couple of turns with the thread. It turns out something resembling a bow. We fold it in half, straighten the paper with our fingers, trying to leave as few folds as possible - we form wings.

When the result satisfies you, take scissors and cut off a strip of a few millimeters from the edge - into antennae. On the remaining part we form a patterned edge reminiscent of a butterfly wing.

We twist the antennae strips with our fingers into thin tubes. Now they definitely resemble antennae. We unfold the wings and finally straighten them. The result was light butterflies.

From folded paper

You can make paper butterflies for decoration from double-sided colored paper or old magazines by folding them into a small accordion. We cut out two squares or rhombuses from paper (one a little larger, the second a little smaller), fold them into a small “accordion”, starting from one of the corners. The smaller the fold, the more interesting the product will be.

We put two folded rhombuses next to each other, tie them in the middle with thread or flexible wire in a sheath suitable color. We make antennae from the remnants of the wire, straighten the wings, and adjust the shape if desired.

Photo for inspiration

First, a little about how and what you can attach already made paper butterflies to. The easiest way is to apply glue to walls or panels. The second, no less simple way is to use double-sided tape. But to make the decoration more voluminous, it is best to glue it not directly to the wall, but to a small piece of foam rubber. The result will be a more airy composition, with clear shadows.

Use paper butterflies to create three-dimensional decorative compositions on small hoops with a fishing line tied to them. Cut out paper insects are attached to the fishing line. You can’t hang them on the wall, but they look very original, although creating such a composition is more difficult than on the wall.

Hoops and fishing line are all you need to create this beauty

And several wall compositions in which butterflies are used for decoration, made from different types paper.

Another option with a large butterfly...

Colorful tornado...

The main thing is to find a bright picture and even a simple silhouette will look great

premises or renovate your homefor the holiday, so that it will bemore comfortable and beautiful.

Usually when it comes to decoration, this implies high costs. The same can be said about a home, which requires a lot of time and money to update.

But if you come to this question creatively, then you can decorate any room without breaking the bank.

You can decorate the walls with paintings or panels, handmade, or you can decorate one or more walls with simple paper butterflies.

On our website you will also find:

• 10 simple works that can decorate any wall
• Beautiful and inexpensive DIY wall crafts

Having created such a decoration, you will be amazed how beautiful it lookswall decoration, which gives the impression that someone is sitting on your wall to restmany bright, rare butterflies.

You can also create a vortex of butterflies that like they're floating in the air flapping his wings in a synchronized dance.

This craft will undoubtedly please the eye. Moreover, butterflies can be not only paper - you can paint them on the wall, which will also look very attractive, especially if you use glowing colors.

Paper butterflies on the wall. Option 1.

You will need:

Colored paper or self-adhesive film

Bright magazine pages

Safety pins

Scotch tape or PVA glue

Scissors

Pen or marker

1. Prepare one or more cardboard templates.

2. Using templates, start making butterflies - trace the stencil on colored paper or self-adhesive film (which will be easy to stick to the wall).

* You choose the number and size of butterflies yourself.

3. If you are using self-adhesive film, then you are almost done - you just need to remove paper layer so that the body of the butterfly becomes sticky. Now just stick the butterflies on the wall as you like.

If you used colored paper, That you can attachbutterflies to the wall using pins, glue or regular or double-sided tape.

Wall decor with butterflies. Option 2.

You will need:

Colored paper (preferably double-sided)

Scissors

Pencil

Double-sided tape

1. Draw an image of a butterfly on colored paper and cut it out. Use this blank as a template for other butterflies. You can also make several templates of different sizes.

2. Attach the templates to colored paper, trace them and cut out new butterflies. To cut out several butterflies at once, simply stack several sheets of paper, fold them in half, draw half a butterfly and cut it out - when you unfold it, you will have several butterflies at once.

3. When you have prepared the required number of butterflies, first lay them out on the floor to figure out how they will be located on the wall.

4. Start gluing double-sided tape to each butterfly, and then begin gluing the butterflies according to the pattern you came up with in advance.

* Butterflies can be glued close to the wall, or the wings can be slightly bent to create the effect of butterflies fluttering.

DIY paper butterflies on the wall. Option 3.

You will need:

Colored paper or origami paper

Pencil

Scissors

Double-sided tape.

1. Place several sheets of construction paper into one pile and fold them in half, and in half again, to create a variety of butterflies when you cut them out.

2. Draw a butterfly on a piece of cardboard and cut it out.

3. Use cardboard butterfly to draw on top sheet from a stack of butterflies, tracing a cardboard template.

4. To stick paper butterflies to the wall, use double-sided tape.

Glowing butterflies on the wall using stencils

For such a butterfly you need light wall and a bright light nearby - a table lamp, for example.

You will need:

Butterfly stencils

Phosphor paint (in in this example 3 colors are used - yellow, green and blue)

Pencil

Sponges and brushes or sponge brushes (one for each paint)

Palette

Spray adhesive

1. Make some butterfly stencils. It is advisable that each paint have its own stencil (or several stencils).

2. Using spray adhesive, adhere the stencils to the wall in the desired order.

3. Prepare a sponge, cut it into several parts and attach each part to the handles of the brushes. You can buy sponge brushes and then you will skip this point.

Read also:

Butterfly wall crafts will help refresh a boring and monochromatic wall. They are used as a symbol of summer, lightness and freedom. You can make butterflies from almost any material. Butterflies on the wall are a great way to decorate a room. They bring elegance and lightness to the room.

What style are butterflies on the wall suitable for?

Butterflies on the wall are made as panels, mounted on one or several walls of the room. They can be made from fabrics and many other materials. Depending on the selected The right way production and design of panels.

They can be attached to the wall at random or made into panels. You can also create paintings.

The lighter the material from which you make appliques, the more they will resemble the real thing. When the wind blows lightly, their wings will rustle, creating an imitation of flight.

Moths are suitable for decorating a room of almost any style, but winged insects will look best in the following styles:

.

It is very important that the color of the moths matches color design rooms. You should not make bright red or green insects for a room decorated in beige tones.

They should also be different in color from the wall so as not to blend in with it. For example, white moths would be out of place on a white or light gray wall. Combinations can be called successful:

The main rule is that the moths on the wall should stand out and at the same time be combined, and not seem like an unnecessary decoration.

Preparing to create applications

Before creating a picture with moths, you need to think about how they will be located, what size they will be and what material they will be made of. You can find ready-made panels on the Internet and get an idea from there, after which you should start making a stencil.

The moths should not be located in one place, and the distance between them should be different to make the composition look interesting. You can attach butterflies in the form of a vortex or randomly place them on the wall.

Afterwards, you need to select the material for production and purchase stencils. It is advisable to have several stencils of different sizes to make the composition look more interesting. You can cut out a stencil on paper, vinyl film or any other suitable material.

Light moths can be cut from:

Making paper butterflies is not difficult, but you will have to tinker with fabric.

Paper

Paper is suitable for those people who do not want to spend money on expensive material and production time. It is very simple to make such moths using a stencil, but they have a drawback - the appliques are easy to damage.

Even small children can cut out paper. You can also use colored paper to draw antennae, eyes, and veins for the moths. This applique is inexpensive and the whole family can cut it out.

Paper butterflies can be cut out from old magazines, or you can print out coloring pages and cut out the outline. It is not necessary to make panels in one color scheme– the more different colors, the more interesting.

Paper butterflies can be glued to the center, and then when the wind blows they will sway. Such insects can be planted on glue, tape, or attached with a push pin.

Cardboard

Cardboard crafts will be a little stronger than paper ones, but will no longer be so light that they sway in the wind. You can stick rhinestones, sparkles on them and attach decorations, and unlike paper ones, cardboard moths will withstand this.

The wings can be made more voluminous or rounded. If the cardboard is thick, it needs to be lightly sprinkled with water, bent, put under a press and dried. After drying, the decoration will take the desired shape.

Cardboard needs to be secured more firmly, as it is heavier than paper. Do not attach it with tape or a pin - the butterfly may fall. It is better to use glue or double-sided tape.

Vinyl film

Vinyl is a self-adhesive material, making it ideal for wall-mounted applications. The film has a smooth glossy finish and shimmers in the light. Bright vinyl film moths will help refresh the room.

It’s not difficult to cut, and you don’t have to worry about how to attach the stickers to the wall. You just need to remove the protective layer from the film and stick it in the right place.

Advice

If you want the wings of a moth to move in the wind, protective film need to be removed only at the bend of the wings. The film must be left on the wings.

Textile

Fabric moths are perfect for liquid plain wallpaper, drapery or other soft finishing fabric. Moths will make the room more comfortable, improving the atmosphere in it.

The fabric should not be wrinkled; iron it before cutting. It is recommended to attach with glue.

Wall mount

The fastening material depends on the material from which the moths are made. For example, glue is suitable for paper, and foam is suitable for lightweight materials. Butterflies can also be attached to threads, hanging from the ceiling.

Glue

You can use glue or a gun. It is not recommended to use a pencil, as it does not hold material well, especially heavy ones. Glue should be used on walls that are not afraid to get dirty.

It is better to apply glue to the fold of the wings, so the moth will look more like a real one.

If you apply glue to all the wings, make sure that it does not extend beyond the edges.. It is important to use high-quality glue, as it may not hold butterflies well or leave unsightly marks on the wallpaper.

Pins

Unlike glue, pins leave little damage to the wall. You can also attach insects to cork board. Pins are suitable for walls made of plastic panels, regular or balsa wood, as well as drywall.

You should select pins with a head that matches the color and shape. You can purchase pins with heads in the shape of different figures or with glitter.

Before sticking a pin with a butterfly on it into the wall, you need to glue the applique to the pin with Moment glue. If you attach butterflies to wallpaper, bend the end of the pin halfway at a right angle. This way the structure will be fixed in the wall naturally.

Styrofoam

To glue the moth to the foam, you need to smear a piece on both sides and use it to attach the moth to the wall. Applications made from heavy materials are not recommended to be placed on such a mount, as the foam may not withstand it. Only paper and cardboard crafts will do.

Threads

In order not to spoil the wall, you can hang butterflies by threads from the ceiling. It is recommended to hang butterflies on threads of different lengths. You can use both colored threads and transparent fishing line. The main thing is that the thread must withstand the decorations.

Glowing butterflies

To create the effect of glowing butterflies, you need to attach the butterflies to a white wall, and there should be a table with a table lamp nearby. To make such a composition, you will need:

• Stencil.
• Phosphor paint in several colors.
• Pencils.
• Sponge.
• Brushes, preferably a palette.
• Glue (preferably spray).

Materials can be purchased at a specialized stationery store. To make a composition you need:

• Attach the stencils to the wall using glue. You can also secure them with pins.
• Cut the sponge into small pieces and attach to the handle of the brushes (you can apply paint with a regular sponge).
• Apply paint inside the stencils. If you want to make the moth multi-colored, it is recommended to mix the colors in the palette.
• When the paint is dry, you need to carefully remove the stencils, turn on the lamp and enjoy beautiful composition on the wall.

To make the composition look more interesting, the moths should be of different sizes and shapes. Stencils on the wall are placed at different angles and in different places.

Crafts made from colored paper

To do beautiful butterflies from colored paper, you need:

• A printer.
• Thick paper in the desired colors.
• White paper.
• Pencil.
• Cardboard (the density should allow it to bend).
• Glue.
• Scissors.

After preparing all the materials, you need to start creating crafts:

• Print the image templates on white paper and cut them out. Prepare plenty of templates in case some don't work out the first time. It is better if the templates are different in size.
• Attach the templates to the cardboard, trace with a simple pencil, then cut out. If you can, print the pictures directly onto cardstock.
• Trace the cardboard templates onto paper. back side colored paper and cut it out. Fold the paper in half to make the butterflies three-dimensional.
• Apply glue to the fold, straighten the moth and press it against the wall with your finger. After some time, spread the wings of the craft.

VIDEO: Do-it-yourself colored butterflies - easy and simple

Colored butterflies in no time

You can stick the butterflies on the wall randomly, or in one direction (in this case, all insects should be different sizes).

Beautiful and plentiful - it looks masterpiece

Origami butterflies

Origami – perfect solution for family crafts. Such moths will look original and unusual thanks to their voluminous wings.

For such a butterfly you need:

• Newspaper or old magazine.
• Any paint (for example, gouache).
• The wire is thin.
• Pliers.
• Pencil.
• Scissors.
• Ruler.

Having prepared the materials necessary for crafts, you can start working:

• Cut squares measuring 4 by 4 cm or 5 by 5 cm from the sheets.
• Fold the paper in half twice.
• Fold the resulting square diagonally in two different directions.
• Fold the paper inwards to create a triangle.
• Fold the two ends of the top layer towards the top.
• Turn the triangle over to the other side and bend the corner up so that it extends beyond the body of the craft.
• Bend the resulting triangle to the other side and glue it to the base.
• Paint the ends of the wings with different paints.
• Make a butterfly body and antennae from wire.
• Expand the butterfly with a scarlet triangle upward, bend its wings and give them any shape.
• Dip the wire frame in glue and attach to the craft.
• Attach the insect to the wall in any reliable way.

VIDEO: Origami butterflies - it couldn’t be easier

Paper butterflies

Volume craft for beginners

Vinyl crafts

Creating butterflies is not a difficult task if you do everything clearly and according to the instructions. To do this you need to purchase the necessary material:

• Old vinyl records.
• Crayons in two colors - black and white (you can use colored pencils instead).
• Butterfly patterns.
• Scissors.

From vinyl records- looks original

Templates should preferably be cardboard. After preparing everything you need, you can start creating the applications themselves:

• Mark the middle of the template on the plate. Use a white chalk or pencil to trace the outline of the plate, and a black chalk to outline the sticker, which is located in the middle of the plate.
• Take a baking sheet, cover it with foil, put a plate on the foil. Preheat the oven to 400 degrees and place a baking sheet in there. Immediately remove the baking sheet with the plate, as it quickly begins to deform, after about 45 seconds.
• Using sharp scissors, cut out the butterfly from the plate. If it hardens again while cutting, it needs to be placed back in the oven. Vinyl cools very quickly, so you need to cut not only carefully, but also quickly. You may have to heat the template several times.
• When the insect is cut out, it must be bent in half;
• When the butterfly has cooled completely, you can glue it to the wall.