Garage 10 by 10 layout. Garage projects

Construction of a garage

  • Brick garage - from 16,000 rub/m2
  • Foam-gas-concrete garage - from 11,000 rub/m2
  • Frame garage- from 8000 rub/m2
  • Garage made of profiled timber - from 12,000 rub/m2
  • Garage made of laminated veneer lumber - from 16,000 rub/m2
  • Garage made of rounded logs - from 13,000 rub/m2
  • Garage made of reinforced concrete slabs - from 24,000 rub/m2
  • Metal garage (LSTC/corrugated sheeting) - from 5,500 rub/m2

Construction of a canopy

  • Carport made of polycarbonate on iron poles - from RUB 3,300/m2
  • Cantilever carport - from 4700 RUR/m2
  • Forged carport - from 5100 RUR/m2
  • Carport made of corrugated sheets - from 4000 rub/m2
  • Carport made of metal tiles - from 4100 rub/m2
  • Carport made of wood - Individually

Roofing

Rafter system from 300.00 rub. m2
Lathing from 150.00 rub. m2
Sewing the gables edged board from 150.00 rub. m2
Covering gables with siding, block house, clapboard, etc. from 300.00 rub. m2
Laying under-roof hydro-wind insulation from 100.00 rub. m2
Laying roofing felt from 100.00 rub. m2
Laying Ondulin from 250.00 rub. m2
Laying metal tiles from 300.00 rub. m2
Laying flexible tiles from 400.00 rub. m2
Laying OSB - plywood from 200.00 rub. m2
Insulation of roof slopes from 150.00 rub. m2
Installation drainage system from 250.00 rub. p.m.

Prices for garage foundations

  • Strip foundation(height 60cm - thickness 30cm) - from 3000 rub/m.p.
  • Strip foundation (height 80cm - thickness 40cm) - from 4350 rub/m.p.
  • Monolithic slab(height 20cm) - from 3500 rub/m2
  • Monolithic slab (height 30cm) - from 4360 rub/m2

Cost of one screw pile with screwing and concreting

  • pile thickness 89 mm. + height 1.5m - 3,000 rub.
  • pile thickness 89 mm. + height 2.5m - 3,200 rub.
  • pile thickness 89 mm. + height 3m - 3,300 rub.
  • pile thickness 108 mm. + height 1.5m - 3,100 rub.
  • pile thickness 108 mm. + height 2.5m - 3,400 rub.
  • pile thickness 108 mm. + height 3m - 3,500 rub.

Electric installation work

Assembly, installation and assembly of electrical panels Unit change Price
Installation of outdoor electrical panel PC. from 800 rub.
Installation of a hidden electrical panel PC. from 1500 rub.
Installation of an electrical panel without a meter electrical energy PC. from 2000 rub.
Installation of an electrical panel with an electric energy meter PC. from 2500 rub.
Installation and disconnection of junction boxes 3 Unit change Price
Up to 4 cables for open wiring soft material(tree) PC. 350 rub.
Up to 4 cables for open wiring hard material(brick/foam concrete/concrete) PC. 400/450/500 rub.
Up to 4 cables for electrical wiring under plasterboard PC. 350 rub.
Up to 4 cables for hidden electrical wiring in foam concrete/brick/concrete PC. 500/550/600 rub.
From 5 cables for open electrical wiring on soft material (wood) PC. 450 rub.
From 5 cables for open electrical wiring on solid material (brick/foam concrete/concrete) PC. 500/550/600 rub.
From 5 cables for electrical wiring under plasterboard PC. 450 rub.
From 5 cables for hidden electrical wiring in foam concrete/brick/concrete PC. 600/650/700 rub.
Installation (laying) power cable up to 4 mm2:2 Unit change Price
Opened directly to the wall using brackets m/n. 50 rub.
Open in corrugated pipe on soft material (wood) m/n. 100 rub.
Opened in a corrugated pipe over solid material (brick/foam concrete/concrete) m/n. 150/150/150 rub.
Opened into a cable channel on soft material (wood) m/n. 100 rub.
Opened into a cable channel on solid material (brick/foam concrete/concrete) m/n. 200/200/200 rub.
Hidden in foam concrete m/n. 300 rub.
Hidden in brick m/n. 350 rub.
Hidden in concrete m/n. 400 rub.
Installation of a new electrical point (socket/switch)1 Unit change Price
Open electrical wiring on soft material (wood) PC. 200 rub.
Open electrical wiring on solid material (brick/foam concrete/concrete) PC. 250/250/250 rub.
Electrical wiring for plasterboard PC. 250 rub.
Hidden electrical wiring in foam concrete PC. 300 rub.
Hidden electrical wiring in brick PC. 350 rub.
Hidden electrical wiring in concrete PC. 400 rub.

Finishing work

  • Installation of an electrical kit inside the garage - from RUB 10,000.
  • Production of garage concrete floors - from RUB 25,000.
  • Replacement. Manufacturing of wooden floors - from RUB 20,000.
  • Interior decoration garage dry eurolining - 800 rub. per m2
  • Manufacturing metal gates with gate, painting - from RUB 30,000.
  • Set of overhead sectional doors + installation - from RUB 45,000.
  • Redecorating inside the garage - from 1500 rubles. per m2

For many people, a personal car has already become important attribute country life. And I absolutely don’t want it to regularly get wet in the rain in the summer, and to have to constantly clean it from falling snow in the winter. A garage project can be a solution to the problem, because with its help it will be possible to build a practical and reliable room where vehicles will always be protected from bad weather.

Types and criteria for choosing a project plan

The garage must reliably protect the car from the effects of excess air humidity and temperature changes. Therefore, experts recommend that it be properly insulated. But this is not particularly relevant if the house is used only for summer time. Here you can get by with an open area that will only have a roof.

It is cheaper to purchase a ready-made project plan if its architectural format successfully combines with the mansion. But for connoisseurs of the exclusive, there is also a custom design service. If desired, a garage room can be initially provided for in the layout of the cottage, for example, it can be conveniently located on the ground floor.

Before ordering a garage project, you need to pay attention to the number and area of ​​utility rooms with which it will be equipped:

  • workshop – suitable for repairs or service car, there is always the opportunity to save on service station services;
  • utility block - used for storing equipment and inventory;
  • relaxation room - if necessary, equipped with furniture and can replace a cozy guest house.

When building a cottage for 2 families, you can pre-provide a garage space with a couple of car spaces on the site. This is convenient if you plan to purchase additional vehicles in the future. In terms of price, it will cost a little more, but it is very practical in terms of saving usable space on the site. It can later be used for planting trees or a spacious swimming pool.

The easiest way to buy a garage project is to use our catalog. We have big choice standard design plans allowing the construction of a garage space required area for 1 or 2 cars. When placing an order on the website, you can count on a free consultation from an experienced architect. The option you like can be adjusted to suit the client’s wishes.

Somehow I deprived men of my attention! But they also want to have their own shelter - a cave in the country and best option than building a garage or workshop, I don’t see. So, men don’t like long introductions, so let’s get straight to the plans. On the first one we see a two-story garage with a studio room. Convenient, one might even say ideal! Dimensions are in feet and inches, use the calculator to convert to cm.

A simple small beautiful garage for your country house

Garages on summer cottages usually built separately from the house, as space allows. Look how handsome stylish project I found a garage! Small, compact, beautiful! There is even a canopy with a bench for relaxing.

Garage for two cars with attic

This is a real man's nook, with living quarters on the second floor. The garage itself is for two cars. If the space of the site allows, then such a garage can be considered the standard of a man’s home.

All dimensions are given in feet and inches. Convert to centimeters using special services on the Internet - it’s not difficult.

A neat project for a 3 by 8 meter garage with living space on the second floor. A special feature of this option is the balcony.

The staircase to the second floor of the garage is located on the street, on the side. There is a utility block in the garage itself. On the second floor there is a living space with a kitchen, as well as a bedroom and a bathroom with a bath. In fact, this is a complete home for a bachelor! or a secluded place for a man who wants to relax.

Well, a few views of the second floor:

Disadvantages of a warm garage in winter

By the way, there is an opinion that a car rots in a warm garage. This is true, so it is better not to heat the lower room. Warm home garage can cause aging of a car in winter, since it is in winter that roads are sprinkled everywhere with salt and other chemical elements.

This happens because in a closed and heated room the machine begins to thaw. Splashes and salt residues thaw and the body quickly becomes corroded.

A car protected from the weather by only one roof or the walls of a detached cold garage will last much longer. You shouldn’t build a warm garage just because a warm car will start faster.

In this case, it is easier to install an electric heating system in the car. This will save both nerves and finances. If you already have a built-in garage, then it is better to turn it into a guest room or gym.

Scheme of a simple garage made of foam blocks

If you need a simple garage made of foam blocks, then here you go standard sizes. There is nothing special to describe here, the plan is extremely simple.

More nice option foam block garage

A worthy project for a garage made of foam blocks for one car. Practical roof design, two windows, small room for relaxation also with a window.

Video from a masonry master - a garage made of cinder blocks in 2 days

In addition to the plan for a garage made of foam blocks, I recommend watching a video in which a masonry master shows and tells how they built a garage for a friend in two days. The video is lively and interesting, showing the construction process with humor and language.

Construction of a cold garage

When building a cold garage, special attention should be paid to the thermal insulation of the room. After all, in the event of a hit warm air On the cold surface of the garage walls, moisture will begin to condense and flow onto the floor.

The gate will also become covered with droplets of water, which will get into the locks or thresholds, and in winter conditions this can lead to the garage simply not opening in the morning. Constantly wet metal elements They will quickly begin to rust.

Project of a two-story garage 8 by 8 for 2 cars

This option is more strict, unlike the first, which, in my female opinion, is more beautiful. Men, I know, don’t need all these decorations, however, since we're talking about about a garage at home, then women’s opinions should also be taken into account. This project is a garage for 2 cars with a residential second floor.

How to improve the thermal insulation properties of a garage

The walls of the box are made of foam blocks. The roof should also be insulated. The garage door should also be insulated with sheet foam, the thickness of which is 4 - 6 cm, then covered with plywood or wooden clapboard. It will be easier to insulate the garage from the inside with full sheathing OSB boards thickness 16 - 22 mm.

Project of a two-story garage 4 by 8 meters for 1 car

Here's a simpler project two-story garage for one car. I’m even envious - such nice, functional houses - on the second floor there is a shower where you can wash off the dirt, a kitchenette and a relaxation room where you can sit with friends and cheer for your favorite sports team.

Video - workshop garage with attic

An interesting video from Forumhouse about how a man built himself a garage - a workshop with an attic. Not finding anything suitable in the search, he decided to build according to an individual plan. See the story and description of the construction of this structure from the author.

Ventilation

With the help of supply and exhaust holes we make natural ventilation garage. The main structures of the garage must also have openings - floors, walls, partitions, doors.

It is better to place these holes diagonally from each other. The supply openings should be located 20 - 25 cm above the floor, and the exhaust openings 10 - 15 cm below the ceiling. All holes should not exceed 0.3% of the entire garage area, otherwise the pull will be poor.

Budget two-story garage project

This project is designed for one car, as well as an open floor plan on the second floor. With a budget design, a single space for a closet or a full-fledged recreation area for a man can be organized on the second floor.

Shed instead of garage

If you decide to limit yourself to only a canopy for your car, then you should remember that you must ensure proper strength support posts. This is especially important during winter snowfalls, when the roof must withstand significant loads.

Project of a one-story garage 8 by 8 meters for 2 cars

And this is a project of one floor, but for two cars, or for one, but with more space for a workshop. I repeat that all dimensions are in feet and inches; you can convert them to centimeters yourself.

Video review of the garage

If you are interested in how to optimize the space of your garage, I advise you to watch a video from Evgeniy, who built himself a garage with an attic with his own hands. The author talks and shows his garage for diagnosing and working on clients’ cars. that is, this is a truly professional car repair shop.

By the way, I was interested in the project of a garage with a bathhouse. I don’t know about you men, but this already seems like overkill to me. A shower cabin is enough for you, but make a bathhouse for the whole family :)

Well, finally the completion of the house has reached the finish line, fine finishing and I got to my “den”. There is just a little left and the purely personal territory will be ready for its purpose.
Let me digress a little: why “from a professional garage organizer”?
It may not be written down correctly, but for the last 25 years I have been working as the head of a company that supplies car repair shops, corporate garages and other motor vehicles with auto repair equipment, tools, etc.
During this time, thousands of different facilities have been completed, from provincial tire shops to dealership centers. Now it’s time to create the first car nest for yourself - and that’s what was created.
I want to say right away that now I would do everything completely differently. I would have taken out the garage separately, doubled the area. In some places I simplified things, in others I did things differently, the wild fantasies of the design remained unfulfilled - but what’s done is done.
Project: purely for the size of the house, an area was laid out to accommodate 2 cars + a mini-instrumental area.
8 m wide under a PC slab supported on a block - clean inner size 7.5 in length 8 .. in front of the garage there is a platform of 6 meters and a gate is in the plans for the summer.
The foundation - due to the fact that the house stands on a former water meadow on a bulk sand cushion, there was only one option: a monolith slab, one for everything at once, both for the garage and for the bathhouse and for the house.
Then the FBS blocks + where the house is with floor slabs (underneath them is a technical basement 1.5 m... there is no technical basement in the garage - there was sand filling there to level the level.
Accordingly, the garage is 1 m below the 1st floor of the house. Well, actually, you can see the drop in the stairs. On top there are 8 meter floor slabs.
There is a load-bearing beam in the middle of the garage; the outer wall of the 2nd floor rests on it. that is, the garage is half in the house and half out.
Subfloor: 1 m of sand was poured directly onto the slab, it lay there for 1 year, then vibrating rammer, geotextile, crushed stone + vibrating rammer, 10 mm reinforcement on top with a step of 20 x 25 cm in one layer. The concrete is approximately 10-12 cm thick and is made with a slope on which the tiles are laid.
Drainage system: a garage heated by the house heating system means that ice will drain from the car. Therefore, in the center there is a slope into the sewer canal, at the end of the canal there is a sand trap and from there it drains into the underground collector ( plastic barrel 200 l upside down, covered with earth
This part was somewhat troublesome - because in addition to the slope into the drain from the walls to the center, it was also necessary to make a slope from the far edge to the entrance.
Technically: first, they laid a rough drain template from polystyrene foam and boards, cast concrete - and then, having a margin of 1 cm along the contour, they poured the solution into the ditch and drowned the sewer canal in it under the right angle. The channel itself is quite common. Gidrolika is a Russian product, a standard product for Leroy Merlin, castorama and other supermarket household goods. I have a galvanized option, there are cheaper cast iron or plastic, the drain from the sump to the street goes through a 50-60 mm underground plastic pipe.
The ceiling - the half where the gate is attached (to the beam) is plastered and painted ceiling paint regular with Leroy. In the area above the workbench under the ceiling there are a lot of communications - so tomorrow/the day after tomorrow I will cover it with a suspended ceiling.
Gate: at first I was planning on Alutech, but somehow one of the organizations offered Hermann at a very close price and I decided on the Germans... no questions about them... quietly, neatly, clearly
In the future, I plan to connect the entrance gate to the site to one remote control. An important point from a design point of view: lay cables under the sockets.
I already had the slabs plastered and then bam, I remembered. Okay, the hollow core slabs are lying on top - half an hour of work with a hammer drill / 3 holes, a cable was hooked into them with wire and brought out to the required points, the holes were closed with a socket.