Glass apron for the kitchen: all the pros and cons. Kitchen apron made of glass: types, pros and cons, real photos What is the correct name for a glass apron in the kitchen

home

Codes

Space between work surfaces kitchen set and its upper modules are constantly exposed to aggressive influences - water, dirt get there, grease and soot settle.

This not only forces the housewife to wash the facing coating every time, but can also lead to its damage and loss of visual appeal.

To solve this problem, special panels are used - kitchen aprons.

Features of glass kitchen aprons

A kitchen apron is a canvas located between the floor and wall-mounted modules of the set and is designed to protect the walls from dirt, hot steam and moisture.

In addition, the apron plays an important role in the interior design of the kitchen. For the manufacture of such structures they use different materials. IN modern headsets Glass kitchen aprons have replaced classic ceramic tile coverings.

Compared to other products, they have the following advantages:

have few seams (there are also seamless models) and a perfectly smooth surface, which makes them easy to clean;
easy to install - installation of glass panels takes no more than two hours;
stylish design - glass apron is able to transform even the most modest set, making it more attractive;
transparent glass allows you to leave the facing material visible - for example, if it is expensive wood or a natural stone or just beautiful coating, while protecting him.

Glass kitchen panels are perfect solution for a cramped room: they allow you to visually expand the space and give it additional volume “in depth”.

When purchasing a glass apron, keep in mind that such a solution will not be cheap at all, and if it becomes deformed, the coating will have to be completely replaced.

Types of glass for kitchen splashbacks

The performance qualities of an apron are completely determined by the properties of the material from which it is made.

Modern furniture manufacturers use the following types of glass for kitchen apron:

tempered glass (stalinite);
laminated glass (triplex);
plexiglass;
polycarbonate

Stalinite is obtained by special heat treatment of traditional silicate glass - it is initially heated to critical temperatures and then quickly cooled. The result is a very durable and reliable material with a service life of more than 20 years.

In addition to resistance to mechanical damage, tempered glass is characterized by increased safety - if it is broken, it will shatter into small pieces without sharp edges: they cannot hurt you.

An apron made of tempered glass is not afraid of temperature changes and can be installed even near gas stove.

The most popular type of thermal glass is “optiwhite” - it is discolored better than regular glass, which has a greenish tint.

Laminated glass is a multilayer material that can consist of either ordinary silicate glass or tempered glass, alternating with a polymer film.

Its main feature is that if the product is damaged, the film prevents fragments from scattering, ensuring complete safety.

Besides, polymer coating performs and decorative function, providing a wide range of designs.

Plexiglas or acrylic glass has gained wide popularity due to its low cost and inability to break it. However, it is not very practical - it scratches quickly, is afraid of overheating and abrasive detergents.

Polycarbonate is a polymer plastic. By operational properties it is similar to plexiglass, but is more resistant to temperature influences. It is inferior to other types of glass in appearance - it quickly scratches and loses its attractiveness.

Glass is unfairly considered a material that quickly gets dirty, on which any dirt is visible. In fact, this is far from the truth - glass aprons get dirty just like others, and they are even easier to clean.

The parameters of the glass splashback must be carefully calculated in advance - most types of glass cannot be easily cut. Please also pay attention to the need to cut holes for sockets.

The dimensions of the apron are determined individually for each set. Its length varies from 0.6 to 2.5 meters. If the panel is longer, it must be made up of several parts.

The height of the apron ranges from 40 to 90 cm. It is best that it covers the entire space between the lower and hanging modules.

The thickness of the product is usually 6-8 mm.

Types of decor for glass kitchen panels

To choose a glass apron for the kitchen that will be not only functional, but also beautiful, it is recommended to decide on its design in advance:

Colorless glass allows you to highlight the decoration of your kitchen. It can be not just smooth, but also have an unusual texture - matte or patterned;
the tinted apron has a translucent color, so it is suitable for giving the background gloss and a slight tint;
plain panels are obtained using special coloring. You can choose an apron to match the color of the furniture, or, on the contrary, create a contrast. Plain products are especially relevant for kitchen sets made in a minimalist style;
skinali - panels on which an image is applied using photo printing, allowing you to create a truly unique apron design.

If you want to make your kitchen visually lighter and more spacious, pay attention to glass with a mirror effect.

One of the most spectacular decorative solutions For kitchen aprons, lighting is used. It not only gives the product original look, but also serves as an additional source of lighting. As a rule, this is a LED strip.

Methods for installing kitchen glass panels on the wall

There are three ways to install kitchen aprons:

on screws;
on hanging fasteners;
for glue (liquid nails).

With the help of screws you can install glass kitchen panels even if unprepared and not perfect flat wall. In this case, a gap of 4-5 mm remains between it and the product. To disguise the fastenings, use special plugs.

Hinged fasteners are flat metal clamps. They are optimally used for installing aprons consisting of several parts - then the joints will be smooth and not so noticeable.

Liquid nails and glue are easy to use, but require that the walls be perfectly smooth and pre-plastered. The main advantage of this installation is the absence of visible fasteners.

When installing the apron, you must adhere to the following recommendations:

since there remains a small gap between the panel and the wall, the latter should be treated with an antibacterial compound - this will help avoid the development of fungus, mold and pathogenic microorganisms;
It is desirable that the walls are smooth, otherwise the product may crack;
strictly follow the sequence of actions - if the glass installation is carried out incorrectly, condensation will constantly accumulate on the apron.

Photos of glass kitchen aprons in the interior

Thus, a glass apron in the kitchen not only serves protective function, but also allows you to diversify the interior. And its ease of installation, durability and lack of need special care makes it one of the most rational options organizing the space between the upper and lower modules of the headset.

If you have any questions or suggestions, you can contact us at e-mail: ls@site
P.S. We do not sell furniture, we only help you get acquainted with what is available and navigate your choice.

What is a kitchen apron? This is the part of the wall that is above work surface. It is she who, willy-nilly, is attacked by all kinds of dirt. In this regard, the question arises not only about the beauty of this part of the kitchen, but also about the practicality of the finishing material.

So, what alternative exists today to the traditional ceramic tiles? Glass aprons for the kitchen are attractive, first of all, due to the practicality of the material. The tempered glass from which we make our skins is incredibly durable and performs well in use. It is easy to remove grease, stains or any other type of dirt. Simply wipe the glass apron with a damp cloth. Such a surface also cannot be damaged by steam or moisture.

The second important aspect when choosing a finishing material is appearance. Kitchen panels made of tempered glass allow you to quickly and easily realize your design ideas. For example, you can make the product transparent and maintain the original concept and original wall. In this case, the installation of the panel assumes a protective function. You can choose either regular clear glass, which has a slight greenish tint, or extra-white Optiwhite.

But more often there is another task: to highlight the protective panel with an original design, decorating the room. The functions of glass coloring and photo printing will help you with this. For more information about what kind of glass aprons for the kitchen you can buy in the Mebel Apartment online store, read on.

What glass panels can you order on the Mebel Apartment website?

In the Furniture Apartment online store you can buy glass aprons for the kitchen inexpensively from the manufacturer. We make kitchen skins of any size and thickness.

One of the main criteria by which the choice is made is the color of the material of the protective panel. In our online store you can choose tempered glass of any color: transparent and Optywhite, gray and bronze, as well as frosted. If you live in Moscow and want to see samples of each type of glass live, we invite you to visit our showroom.

It’s worth mentioning separately about kitchen aprons made of glass with photo printing. It is this version of the skin that is now in greatest demand. This function allows the buyer to order a glass panel with any pattern, or single-color photo printing. Kitchens with such skins immediately attract the attention of guests. You can choose your own image or apply a picture from ours to the glass apron

One of modern trends, used in the design of the kitchen, is the use of glass instead of traditional tiles. Due to the fact that the surface of this material is smooth and non-porous, it provides increased resistance of the kitchen apron to moisture and mold. In addition, its ability to reflect light visually increases the size of the room and adds additional brightness to even a dark kitchen.

photos

Kinds

The use of a glass kitchen apron makes the kitchen more modern, in some cases even unique. A beautiful colored design on a glass panel or tile that shines and sparkles in a variety of colors can transform a kitchen into a work of art and enhance the ambience of the kitchen.

Design options for such kitchen aprons can be chosen from a huge number of different combinations available to the modern buyer. For example, purchase stained glass tiles; glass with a pattern called “skinal”, or simply enamel-painted heat-resistant glass called stemalite.

Stained glass tiles range in color from simple translucent tones to rainbow and golden shades. Some manufacturers even offer crystal glass tiles or tiles with fine gold veins. You can also purchase mosaic glass tiles decorated with a unique hand painted. Such tiles help to create non-standard and memorable glass mosaics or monochrome design compositions in the “techno” style.

Skins are panels made of stalinite or triplex (tempered glass) with a high-definition image printed on them. Modern method photo printing, used in the production of skinals, allows you to create unique design projects. Such panels can be inserted into the gap between the top and base cabinets kitchen set, creating a kitchen apron, or decorate cabinet doors in the kitchen.

There are options for monochromatic design of a kitchen apron using glass. In this case, such modifications are used as:

Stemalite, which is first painted and subsequently heat treated in order to give strength to the material and durability of paints;
Satin, which is a matte tempered glass that can be decorated with a sandblasted pattern;
Optiwhite, which is also thermal glass, but undergoes additional processing to make it transparent (bleached);
Triplex, which is also called laminated glass due to the presence of a film between two glass layers;
Light panels that have built-in LED backlighting, which is mounted at the manufacturing stage and turns such a panel into independent lamp;
Organic glass(plexiglass), which is a variant of plastic.

Advantages

In addition to the fact that the use of glass when decorating a kitchen apron adds charm to any kitchen, this material is distinguished by its practicality and good consumer qualities.

Advantages of a glass apron for the kitchen:

Fireproof glass is very durable material;
Possesses high stability to moisture and stains;
Very easy to clean;
Impact resistant chemical substances;
Can be used to cover and protect wallpaper, or an apron made from other, more soft materials;
It reflects light, so such an apron will visually increase the size of the kitchen;
Available in a huge number of color, texture and pattern options.

Reviews from customers who have installed a glass kitchen splashback speak in favor of this choice. In most cases, owners almost unanimously recommend installing a glass skin with a pattern, but there are also supporters of stained glass mosaics assembled from individual tiles.

For practical reasons, it is recommended to install a separate section of the panel near hob or plates, since, despite the fact that heat-resistant glass is used in the production of skinals, due to temperature changes, some types of paint may peel off (this does not apply to the use of uf printing). In this case, a fragmentary installation will make it possible to subsequently replace the area that has become unusable without damaging the entire apron fabric.

Flaws

In addition to the advantages, a glass apron for the kitchen also has some disadvantages.

The disadvantages of using a material such as thermal glass for making kitchen aprons include the following points:

High price quality panels and tiles from it; cheap types of tiles can crack and crumble;
In the case when the production of a skinal is ordered, it is necessary to carefully measure the holes for sockets and fastenings of the rod - railing, since it is impossible to make changes to the finished skinal;
Glass is susceptible to scratches;
When installing glass tiles or shingles, special skills are required, so you won’t be able to do it yourself;
Glass skinal is not a durable material; usually the manufacturer provides a warranty period.

Types of material

Stalinite

Stalinite is the name given to something created back in Soviet times tempered extra strong glass. During production, the material is heated to very high high temperature(more than 600 degrees), after which it is cooled slowly and evenly on both sides.

After such processing, such a material receives high strength and resistance to external influences, so the name “tempered glass” is sometimes used, by analogy with the production of tempered steel.

Also, the advantages of stalinite include its heat resistance and thermal insulation qualities, because after such treatment it is not afraid of temperature changes that can occur in a home kitchen.

In addition, stalinite can be called safety glass, because it can only break under very strong impact. And even in this case, the fragments will not pose a danger to others, because they will have blunt edges and will be very small.

If you place such glass on a clean White list paper, you can immediately distinguish it from ordinary glass, because stalinite, unlike simple transparent glass, will have a greenish or bluish tint.

This feature of stalinite must be taken into account when choosing enamel for applying a pattern to its surface. Also, during operation, all holes must be cut in advance, before the heat treatment stage.

photos

Triplex

Triplex skins are the most expensive and difficult to manufacture. This is due to the fact that the image on such glass is made in such a way that it is protected both from the outside and from the inside.

When making triplex, two methods are used. The first is that the film is placed between two sheets of glass, pressed and then exposed to very high temperatures. Another, more modern one, involves placing interlayer glass in a vacuum chamber. It is thanks to this production method that it became possible to create decorative skins from this type of transparent glass.

Thus, between two layers of glass, which, thanks to the presence of the film, becomes unbreakable, you can also place any decorative material. It can be fabric, leather, metal, leaves, or simply a design applied to the inter-glass film.

Thus, the advantages of triplex can be called:

Its strength (triplex with a thickness of more than 13 mm is classified as bulletproof glass);
The fact that when broken, triplex does not produce fragments;
High level transparency;
Long service life.

Negative side The use of triplex when creating a kitchen apron is difficult to work with this material and its significant cost.

Plexiglas

An alternative to glass panels is to use plexiglass, which is a transparent plastic. Plexiglas is also called plexiglass or acrylic glass.

It is almost 2.5 times lighter in weight, more durable and slightly less transparent than classic glass. The advantage of this type of material is its flexibility and ease of processing; since it can be easily cut, polished, sanded and painted.

Just like on the surface of ordinary glass, mold and other microorganisms do not develop on it.

There is extruded plexiglass and cast glass; there are some differences in manufacturing between these two options, but they have little effect on consumer properties. Both of these materials are used to create kitchen aprons. It is worth remembering that plexiglass can deform when heated, so you should not place it above the stove.

Applying the image is possible either by gluing the film to the reverse side of the skin, or by using modern way uf – seal. This method involves the use of special ink that is applied to the front surface of the material. Images obtained under the influence of uf rays are clear and bright, since the paint is not absorbed but remains on the surface. When caring for such an apron, you should avoid abrasive cleaning products.

Polycarbonate

Polycarbonate also belongs to polymers and is a type of acrylic glass, also called ABC plastic. It has a soft structure and flexibility; it can be cut without problems with a jigsaw or even an ordinary table knife.

The design is applied to polycarbonate either using a decorative film glued to the reverse side, or using ultraviolet printing. The latter is of higher quality and easier to use. The disadvantages of using such material include the fact that after a couple of years such an image will lose its brightness, and a light picture may acquire a yellowish tint.

There are size restrictions for glass skins. Standard sizes stipulate that the maximum length and width of the fabric produced can be up to 3300×2140mm. In cases where the working wall bigger size and a longer apron is required, several panels are made to fit the final version. In this case, combinations of several skinals with an identical or fragmented pattern are possible, creating an overall indescribable decor.

The most suitable glass for designing drawings is called “optiwhite”. This is explained by the fact that this clarified and tempered glass is completely transparent. Due to the absence of the greenish tint inherent in such materials as, for example, stalinite, Optiwhite provides accurate color reproduction of the design.

An important technical nuance is whether the drawings on the panel correspond to the holes for sockets and fastenings for the railing, which must be provided at the stage of discussing the design of the skin in order to maintain the harmony and integrity of the overall picture.

You need to pay attention to the thickness of the glass you purchase. This indicator depends on the size of the kitchen apron. For shorter skinals, for example, 1 meter long, the optimal thickness will be from 4 to 5 mm. If the skin is longer, then in this case it is advisable to make it from thicker 6 mm glass.

It is also necessary to pay attention to the method of applying the pattern to the skin. The film method involves applying a self-adhesive film and subsequent processing of the skin in vacuum chamber. When receiving the finished product, you should pay attention to whether the film lies flat and whether bubbles have formed under it.

The ultraviolet printing method consists of applying special ink and subsequent processing with uf rays; it does not have pronounced “pitfalls”. To be completely confident in the result obtained, it is worth making a preliminary color test in the workshop.

It is not recommended to take measurements for the skin yourself. Since in any case you will have to order the production of a glass panel in a special workshop, it makes sense to use the services of this workshop already at the measurement stage. This will allow you to avoid discrepancies when creating a skin, because the permissible error in this production is only 1 mm.

Wall mounting options

An apron made of skinals is installed after the kitchen set has been completely hung.

Installation of the finished glass panel must be done on a flat and smooth wall surface so that the glass does not crack. It is possible to fix the skinal on top of the wallpaper or even tiles if it lies flat. In the case where a single panel is installed, the kitchen owner will be quite capable of doing this work himself.

There are two types of fastening the skins to the wall surface. In the first case, fixation is carried out using “liquid nails” or glue. It is important that the wall is smooth and dry, otherwise it will not be possible to securely fasten the skinal. This option is suitable for lightweight structures made of acrylic glass or polycarbonate.

For heavier materials, fastening options using metal parts: hooks or bolts. Installation using hooks does not require creation in glass through holes, the hook plates press the glass and are almost invisible. In this way it is convenient to secure the edges of the panels in case of joining them.

To fix the skins with bolts, it is necessary to plan special holes for them at the design stage. After fastening, the screw is covered with a decorative cap. With this installation method, a small distance remains between the wall and the wall, so it allows the panel to be installed even on a surface made of old tiles. The skinal is most securely attached to bolts, but they do not always fit well into the design; this point is worth considering when choosing an artistic composition.

Some manufacturers offer fastening of the glass apron using magnets. In this case, there are antipodal magnets on the inner surface of the skin and on the wall, which support the weight of the panel and are invisible from the outside. This is a very neat and clean way of attaching.

Today we will discuss quite a lot with our readers interesting topic installing glass panels in the kitchen instead of tiles.

This original innovation has quite a few advantages over the ceramic tiles that have graced our kitchens for many years:

the absence of seams and other irregularities eliminates the accumulation of dirt, which increases hygiene in the room;
unlimited choice of panel colors and patterns, which can be applied at the client’s request;

simple installation;
the reflective light of the glossy surface visually expands the kitchen space, which is of no small importance;

If desired, you can install internal lighting by installing LED hidden garlands, which will add pleasant variety and a certain charm to the interior.

There is only one downside to a glass apron - the panels are made of tempered glass increased strength, they cannot be cut and it is impossible to drill holes in them for sockets or adjust the dimensions at the mounting location.

Design of manufactured panels

Most cheap option glass apron - panels made of ordinary transparent glass, its purpose is to protect walls from unwanted splashes during cooking and washing dishes. At the same time, it remains almost invisible against the background of painted or wallpapered walls of the room.

If desired, you can place any installations under glass that can enliven the interior of your kitchen or, using sandblasting, apply inscriptions that decorate cafes and restaurants. If desired, the panels can simply be made matte.

Most popular material for the production of protective panels is colored glass, obtained by applying paint to the surface followed by heat treatment.

This adds about 20% to the overall price compared to the simple transparent option.

The advantages of such an apron are the durability of the applied pattern and an almost unlimited choice of shades. Designers consider this solution ideal for rooms with a complex color scheme.

The most popular, depending on your family budget, a type of tempered glass panels are models with full-fledged drawings on various topics.

This is not surprising, because in this case you can make your kitchen unique and even visually expand the space, which is important for our not always spacious rooms.

You can apply images with perspective or a 3D drawing, for this purpose with reverse side vinyl film with the selected pattern is glued onto the glass panel - this is a budget option, but short-lived. Over time, the design will fade, the film will wrinkle from excess moisture and may even come off in some places.

The second method - photo printing is much more durable and looks impressive, but is 50% more expensive. If you decide to surprise your friends and acquaintances with an original 3D drawing, then it will cost you 2.5 times more, but the quality, durability and effect are worth it.

One more nuance you need to know when applying a pattern or film; Clear Float glass is quite common due to its low cost, but has a significant drawback - a greenish tint that distorts color scheme the design you have chosen.

During production, Optiwhite glasses undergo additional and fairly high-quality bleaching and are suitable for all types of images, but are more expensive.

Enough interesting option glass apron for the kitchen are panels made of mirror glass- they are just the perfect find for a small kitchen.

With their help, you can change the geometry of the room by forcing narrow room seem much wider and much more spacious.

For designers, this is freedom: a tinted mirror, artificially aged, mirrors with different patterns, as well as a combination of the above options.

Installation of a glass apron

In construction, there are three main ways to install glass panels: using ordinary fasteners (screws), hanging fasteners and installation with liquid nails.

The first mounting option attracts many because it does not require special preparation of the walls of the room - there is a 4 mm gap between the protective apron and the main wall, so you don’t even have to dismantle the old tiles. Significant disadvantage of this option: fasteners remain visible, although covered with decorative caps.

Fastening using special metal clamps into which the panels are inserted ensures maximum joining of all elements if you install them from several parts.

The simplest method of attaching panels to liquid nails is fraught with many unexpected nuances: the wall must be perfectly flat, and you can also miss joining the individual parts.

We must remember that all glass panels are hardened during manufacturing and cannot be cut, so when ordering, you must give exact dimensions and where to make holes for sockets and fasteners if you will secure them with screws.

You can make an original protective apron from a special type of glass - triplex: a kind of sandwich from two sheets of special glass, between which the type of pattern you have chosen will be located. This method reliably protects the decorative image, and its strength doubles.

When installing protective panels with the help of specialists from a public service company, you need to take into account that the total estimate will consist of: prices for measuring services, prices for the selected type of glass, preparation of a design package by designers, the cost of hardening and drawing, processing of ends and cutting holes, plus delivery.

Before installing new prestigious protection in your kitchen, compare the prices of several companies and consult which services are included in the price of the order. Always choose a reliable installer with excellent references.

A glass apron in the kitchen is very fashionable and prestigious, but, unfortunately, not all segments of the population can afford it. Wall protection, if such panels are installed, will be provided in full. You can choose a budget option, without any newfangled designs and colorful designs. It all depends on your desire and financial capabilities.

How to choose the right glass apron for the kitchen, 6 most common mistakes when ordering and the nuances of installing glass panels, a review of prices, designer advice, photos of kitchens with skins and reviews of glass splashbacks - here.

Glass is an excellent alternative to ceramic tiles and other materials that are traditionally used to finish the apron, that is, the section of the wall above the kitchen work area. This is one of the most environmentally friendly and hygienic finishing materials. The glass apron is not afraid of moisture and steam, does not absorb dirt and grease, is easy to clean and looks incredibly impressive.

The most popular myth about glass splashbacks is that drops of water and grease, dust, and fingerprints will be too noticeable on the shiny surface of the glass. However, according to reviews from those who have already decided to make such an apron in the kitchen, there are no more marks left on it than on other surfaces, for example, on ceramic tiles. And caring for it is much easier - glass has no seams between tiles, where dirt accumulates over time.

What kind of glass is suitable for an apron?

As a rule, the thickness of glass for a kitchen apron is 6 or 8 millimeters.

Tempered glass is 5 times stronger than regular glass. But even if somehow it manages to break, its fragments will be small and not sharp.

This apron fits perfectly next to the stove or hob and is not afraid of exposure to heat.

Regular glass is less reliable. It is generally difficult to consider an apron made of plexiglass as an option for wall decoration in the kitchen. It cannot be used in the area of a gas stove due to temperature changes; plexiglass is easily scratched, becomes dull, and is difficult to clean from grease and other kitchen contaminants.

When choosing glass for your splashback, keep in mind: you may need so-called bleached glass - Optiwhite. Ordinary glass, although it seems absolutely transparent, actually has a pronounced greenish “bottle” tint. On colored aprons (with a landscape, city panorama or multi-colored still life) it will be invisible. But if your backsplash has a lot of white or other very light background, a greenish tint will ruin everything. Experts note that thanks to greater transparency, Optiwhite makes the design on the apron clearer and brighter. Clarified glass costs about 30% more than regular glass.

What can a glass apron look like?

1. Clear glass without color pattern

It can be transparent or frosted. The advantage of a transparent apron is that it is “invisible”, does not catch the eye at all and seems to dissolve in space. His main function- protect the wall painted or covered with wallpaper (photo wallpaper) from splashes.

Apron from frosted glass gives less glare and looks more interesting.

Glass doesn't have to be smooth. Panels with a textured textured surface, such as satin, look very beautiful.

Another option is to apply a design, ornament or inscription to the surface of the glass using sandblasting or silk-screen printing.

2. Photo printing (full-color UV printing) on glass

Panels with a beautiful image printed on them are called skinali. Today this is the most popular and sought-after option for a glass apron.

The glass apron with photo printing is very beautiful and durable. The image is applied to the “wrong” side of the glass using a special technology. UV ink does not fade, can withstand heating up to 120 degrees, and is not afraid of moisture.

Panels with a 3D effect look especially impressive. However, such an apron will cost much more than clear or colored glass.

3. Painted glass

A plain colored glass apron looks very stylish, bright and at the same time unobtrusive. The palette of available shades is, without exaggeration, huge.

In the manufacture of such aprons, the so-called stemalite can be used. Special paint is applied to the inner surface of the glass panel, then the glass undergoes heat treatment. This is a very reliable and durable painting method.

4. With a pattern on decorative vinyl film

A kitchen apron with vinyl film on which a pattern is applied is a more budget-friendly and affordable option than photo printing. The film is rolled onto the inner surface of the glass, which protects it from moisture and temperature changes. However, over time, it can wrinkle, peel and fade if the material and work were of poor quality.

5. Apron made of tempered glass triplex

Triplex is called laminated glass of different thicknesses. Its advantage is that the drawing is reliably protected from any external influences. A triplex apron is a “sandwich” of two layers of glass, between which an image is “baked.” If you manage to break the triplex, it will not break, but will simply become covered with cracks. However, this option is used quite rarely in the kitchen. The reason is the relative high cost, its thickness is greater than that of a regular glass apron, and there are some inconveniences with cutouts for sockets and roof rails.

6. Mirror apron

It looks very stylish and unusual, visually expands the space and creates an unusual visual effect. But many people are very uncomfortable constantly seeing themselves in the mirror while cooking or washing dishes. Therefore, instead of a mirror panel it is better to use mirror tiles with sandblasted finish and partial matting.

From the designer
A glass apron is very good for a cramped and small kitchen. Unobtrusively reflecting surrounding objects, it visually expands the space. Glossy surface such an apron reflects light and makes it lighter.
A landscape or a picture with a city view adds perspective, depth to the space, pushes the boundaries - exactly what is needed for a small-sized kitchen.
High-quality glass panels made using technology are very durable. This apron will definitely serve you at least until the next overhaul kitchens.

Installation of a glass apron - important nuances

Installing a finished apron takes very little time. On average for a standard apron experienced craftsmen it takes 1-2 hours.

The speed and cleanliness of installation distinguishes skinali from or mosaic.
The glass apron is attached to the wall in two ways.

1. With fasteners

This installation method is considered optimal. The apron is fixed very securely, even if the glass is thick and heavy. Another plus is that with this method of fastening there is no need to carefully prepare and level the wall. In addition, if necessary, the apron can be easily removed and put back.

Please note: two types of fasteners can be used - hinged or walk-through.

Hinged fasteners- these are metal plates-“hooks” the size of a centimeter into which a glass panel is inserted. There are no holes in the apron. The plates press against the glass and are very unnoticeable. This installation method allows you to most accurately join the edges of the panels if the apron is not solid.

Using pass-through fastener Before tempering the glass, special holes for screws are made in the corners of the apron. After installation, they are closed with special decorative caps with a diameter of 2 cm.

The advantage of this method is that there is a gap of about 4 mm between the glass and the wall. Therefore, such aprons can be attached even to very uneven wall or, for example, on old tile. But the fasteners will be visible all the time, and they will not fit every design.

2. For glue or liquid nails

With this method, the glass panel of the apron is glued to the wall. It is very important that the wall is properly prepared. The surface must be leveled, plastered and dry. Installation with glue on one side is easier - no need to drill the walls and mess with fasteners. On the other hand, the use of fasteners is considered more reliable.

After installing the glass panel, the joint between the apron and the tabletop is covered with a wall edge. If the apron is not solid, but composite and there are joints, it is very important that the master carefully aligns the panels without leaving gaps. The joints are processed silicone sealant, which protects the wall from fungus. The thinnest layer of sealant with outside with careful work of the master it will be invisible.

The standard installation offered by Moscow companies does not include preliminary preparation walls and installation of fittings and accessories (plinths, railings, sockets, lighting, etc.) These services will have to be paid additionally.

If desired, you can install the glass apron yourself. But this work requires experience and skill in handling glass.

Glass splashback with lighting

Dimensions

The standard height of a kitchen apron is usually from 40 to 90 centimeters. According to experts, it is desirable that the length of the glass panel be no more than 2-2.5 meters. If you have big kitchen, and you need a long apron, they will make it composite. In this case, the joints at quality work turn out almost invisible.

How much does a glass splashback cost?

Prices for a glass apron, even in Moscow, not to mention the regions, can vary greatly. How much will it cost ready product depends on many factors: the type of glass, the method of painting and applying the image, the installation method and the cost of fasteners, whether the apron is composite or solid, whether there is work area beveled corners, is additional design modification of the image needed, etc.

The editor of the site studied the price lists on the websites of a couple of dozen Moscow companies that manufacture custom glass aprons, which allowed us to get some idea about the services and the general price level.

A surveyor's visit to Moscow costs about 1,000 rubles, to the region - about one and a half times more expensive.

On some sites you can use a calculator that allows you to get a preliminary estimate of the cost of the future apron. The price, of course, will be very approximate and can easily change during an actual order.

We tried to calculate the cost of a tempered glass apron with photo printing, 250 cm long and 60 cm high, with cutouts for two socket blocks and roof rails. Three calculators promised that such an apron would cost about 14 thousand rubles. This price includes measurements, the cost of manufacturing the apron, delivery within the Moscow Ring Road and installation.

If clarified Optiwhite glass is used, then the price of exactly the same apron rises to 17.5-18 thousand rubles.
On average, prices for a 6 mm tempered glass apron with UV photo printing start from 4.5-5 thousand per square meter, including the cost of fasteners.

An apron with photo printing with a 3D effect will cost from 9.5 thousand rubles per meter.

The minimum price for a transparent apron made of tempered glass 6 mm without photo printing starts from 3.5 thousand rubles. The same apron, but made of transparent Optiwhite glass, will cost about 30% more.

Tempered glass is 40-50% more expensive than regular silicate “raw” glass.

If you choose triplex with photo printing, then prices start from 10.5 thousand per square meter.

The average production time for a glass apron is 10-15 working days.

Please be aware that there are a number of services that may require additional charges.

These include apron fitting, color proofing, color proofing, additional design processing of the drawing and creation of an individual layout. Some companies charge a fee for purchasing an image from a stock photo. Many manufacturers offer to additionally protect the surface of the apron with transparent or colored protective film. For some, this service is free, for others - from 500 rubles per linear meter.

Virtual fitting of three apron options in a photo of your kitchen within the Moscow Ring Road costs 900-1000 rubles. Some companies undertake to do it for free when placing an order.

Photo gallery

Examples of how a glass apron can look on real kitchen, look in our photo gallery.

Photos of aprons from manufacturers

Sections