Diesel boiler "Kiturami": technical characteristics and reviews. Diesel boiler Kiturami Single-circuit diesel boilers kiturami

Even at the stage of designing heating in a house, you have to operate with the general technical characteristics of the boiler, but in the end you still need to go to the store and choose a very specific model from the huge assortment on the market.

It will be useful to find out in more detail what a Kiturami diesel boiler is, what models are in the line, and how they can be better than other offers on the market.

Features of Kiturami boilers

Kiturami is a South Korean company with more than half a century of experience in the development and production of heating boilers and related equipment.

During this time, the company became one of the leaders in the domestic Korean market, and also found an extensive market in North America and nearby Asian countries. In our country, Kiturami boilers have been officially distributed for at least ten years and have already managed to show their good side.

The main emphasis in promoting boilers is on the introduction innovative technologies and in particular, our own developments, which have no analogues from other manufacturers or determine the narrow specificity of the equipment’s operation.

Diesel boilers, by definition, are not considered as the main the lineup for a wide range of applications. In terms of economic feasibility, they are inferior to gas, electric and even solid-state boilers. However, they are still in demand among consumers due to a number of reasons why liquid fuel is becoming preferable.

In remote areas of residence, where there is no stable connection to power grids and no gas supply, the issue of fuel availability becomes acute. At the same time, the heating of the house must, by definition, work uninterruptedly throughout the entire season. If for many countries such situations are rather the exception to the rule, then for us, on the contrary, they are commonplace, the reason for which is the vast expanses that separate populated areas.

Diesel fuel, unlike gas, is easier to transport and easier to store with minimal risks to life and environment. Unlike solid fuel boilers, diesel fuel, when burned, provides uniform heating and a greater degree of control over resource consumption. And finally, the design of a diesel boiler and, in particular, the burner does not limit the use of other heat sources.

With minimal changes, a diesel burner can be replaced to use blue fuel, and boilers equipped with an extensive combustion chamber and grate can can quickly switch to using coal, wood or pellets.

Kiturami diesel boilers are different high degree manufacturability and are ideally balanced equipment for use diesel fuel as a heat source, and at the same time they are excellent for the listed types of conversion for gas or solid fuel operation. So constructive and functional flexibility is the first significant advantage.

Kiturami boilers often use their own developments and a unique layout. On the one hand, this reduces the maintainability of heating equipment, but on the other hand, it ensures the highest boiler efficiency and balanced operation while observing simple and transparent operating rules. This is the second significant reason to pay attention to diesel boilers originally from South Korea.

The last advantage is the cost of boiler equipment. Even taking into account the high performance and proven quality of the boilers, their cost does not exceed the market average among similar offers.

So it turns out that Kiturami boilers have three features: balanced design, high efficiency and affordable price.

Specifications

The operational characteristics, dimensions and parameters of Turbo series boilers are presented in the table below. It is clearly seen that the series of floor-standing diesel boilers covers a power range from 10 to 35 kW, which is quite enough to heat houses up to 250-275 square meters. Part of the heat will be used to prepare hot water, which must be taken into account in the calculations.

All Kuturami double-circuit boilers and heat exchangers, by the way, are ideally designed specifically for these tasks.

Fuel consumption

Fuel consumption is shown in the table with technical requirements. However, please remember that actual consumption depends on individual settings. Based on the actual power required to heat the house, an appropriate nozzle is selected from the set offered by the manufacturer.

Thermal power, fuel consumption and fuel combustion mode are set. The parameter indicated in the table displays factory presets sufficient to ensure proper performance provided that only high-quality fuel is used, more often this means diesel fuel with winter additives that do not allow it to thicken or separate paraffin in excess of the norm.

In a real situation, for a boiler model with a power of up to 15 kW, you can expect fuel consumption at 8 liters per day taking into account the frequency of burner operation and the optimal temperature conditions in the house. However, this is not the limit.

The correct approach to choosing a heating mode, as well as installing a controller with variable temperature conditions, for example, depending on the time of day and day of the week, can reduce consumption even further.

Chimney

Cuturami boilers, gas, diesel, floor-mounted or wall-mounted, are mostly equipped with a closed combustion chamber and, accordingly, compulsory system exhaust gas removal. The Turbo series we are currently reviewing is no exception.

The chimney for boilers is coaxial for simultaneous supply fresh air from the street and exhaust gas removal. Since the exhaust temperature after passing through the heat exchangers is no longer high, the requirements for the heat resistance of the chimney are reduced, and the list of acceptable materials is expanded.

IN best case scenario a steel coaxial chimney is still used, but a ceramic vertical chimney with a group of internal separate channels for supplying air, removing gases from the combustion chamber and ventilating the boiler room can be effectively used in the same capacity.

The size of the chimney is strictly indicated in the boiler specification and operating instructions. For the entire Turbo series it is 80 mm.

If desired, you can make a chimney with a slightly larger diameter, but no more than 50% above the specified value, that is, up to 120 mm.

Under no circumstances should the size and cross-section be reduced. Even though the removal of combustion products is forced, the resistance of the chimney will greatly affect the combustion mode and the quality of fuel combustion.

turbo 13r

The boiler model number corresponds to the amount of heat generated per hour - 13,000 kcal/hour. Converted to conventional kilowatts, the resulting value is 15.1 kW.

The declared power is enough to heat a house with an area of ​​up to 150 m2. Naturally, one should take into account the heat costs for preparing hot water. If a significant consumption of hot water is predicted, and regularly, then the thermal power for the heating circuit will naturally be lower.

Reliability and balanced operation, combined with the affordable cost of the boiler, gives a clear advantage in the case of using several boilers simultaneously in one building, for example, when dividing the heating circuit for each floor separately or when covering a large area in two more directions.

turbo 17

Thermal power already reaches 19.8 kW, which is enough to cover the heating of a house with an area of ​​up to 180 m2. It is possible to reasonably increase the upper performance threshold by selecting the appropriate nozzle on the burner, however, this will affect fuel consumption.

This approach allows you to solve the problem with increased DHW consumption so that without extra costs do not hesitate to use hot water even in the most severe frosts.

turbo 21r

With a further increase in power comes a model with a declared performance of 24.4 kW, and at the same time the performance of the DHW circuit increases significantly. It should be noted that the dimensions of the boiler do not change compared to younger models.

turbo 30r

The most powerful model in the Kiturami line of liquid fuel boilers. A performance of 34.9 kW makes it possible to heat a room up to 350 m2, but at the same time The cost of the boiler at retail is approximately 45-46 thousand rubles., which is undoubtedly an attractive option.

As in the entire line of boilers, burners with a unique torch shape and optimal fuel combustion mode are used.

A minimum amount of nitrogen oxides is recorded in the exhaust, which indicates the high environmental friendliness of the equipment.

Settings

It is better to entrust the initial startup and setup of Kiturami boilers to a specialist who can correctly determine the optimal operating mode and select desired type injectors and check the fuel consumption depending on its characteristics and even the method of connection and location of the fuel tank.

For self-installation included with the boiler detailed instructions, according to which it is possible to determine the operating mode closest to the design value.

The main thing is to adhere to the sequence of actions defined in the technical documentation and visual aids for putting the equipment into operation.

Setting up and adjusting the boiler settings should be carried out not only at the first start-up, but also during preventive maintenance before each new season and to switch to summer mode, in which only the DHW circuit will be used.

Malfunctions

Kuturami boiler equipment is equipped with a full-fledged self-diagnosis system based on the operation of a number of sensors. The controller is able to assess the condition of the equipment, as well as the current operating mode, and respond to any deviations or problems that arise during operation.

In any emergency situation, the main action assigned to the boiler controller is to stop the burner to prevent significant consequences.

A well-developed self-diagnosis algorithm allows you to identify the problem and indicate the error code on the display so that the user can take action as quickly as possible necessary actions for repair and restoration of functionality.

Among frequent breakdowns Kiturami diesel boilers:

• No ignition (error code 01);
• Does not start, there are no messages on the display.;
• Coolant leakage (depressurization of the heat exchanger or one of the pipeline connections);
• The flame periodically goes out with an emergency stop of the boiler;
• There is no draft, the operation of the boiler is accompanied by the flow of smoke and exhaust into the room.

Error 01 and solution

If error code 01 appears on the boiler display screen, it means that for some reason the fuel did not ignite, there is no torch, the controller forcibly stops the fuel supply, displays an error message, and signals the problem to the user.

Solving the problem requires precise execution of a procedure that can identify the source of the problem and eliminate the obstacle in the operation of the boiler as effectively as possible.

IN in brief the procedure looks like this:

Quite often, the fuel-air mixture is supplied under too much pressure into the chamber and therefore does not have time to ignite from the electrode. The problem is solved at the 5th step of the algorithm by adjusting the air damper, which causes a mixture with a changed concentration to enter the chamber.

Doesn't start

The most unpleasant situation is when the boiler simply does not turn on. There are no signals on the display, and accordingly there is no error code by which the malfunction can be determined.

In such a situation, it would be appropriate to call a specialist service center, who will be able to understand the situation and give the correct verdict, as well as determine the repair procedure. You can independently only check the presence of voltage in the network, as well as the fuses in the boiler.

Leak

Most often, a leak means that the seal has been damaged in some connection of the pipeline inside the boiler. It is enough to inspect the equipment and determine the location of the leak and replace the gasket.

The heat exchanger in Kiturami boilers is made of alloy steel and copper, so there are no obvious errors in the selection of coolant or mechanical damage does not leak.

Burner goes out periodically

Most common cause is a malfunction in the burner settings. It is important to adjust its power and, using a gas analyzer, determine the optimal air/fuel ratio for complete combustion. You cannot do such work yourself, so it is better to contact a service center.

There is no draft, smoke and exhaust enters the room

Most likely, the burner fan is not working for some reason. It is important to first check that the impeller is intact and rotates normally.

It is possible that debris has accumulated inside the fan, or the impeller shaft is jammed. Next, the electrical part and control unit are checked.

Diesel boilers Kiturami (Kiturami) is a high-quality, economical, highly efficient and functional equipment used for heating and hot water supply of residential and public buildings. Wide range of Korean-made boilers, attractive design and affordable price determine their popularity among consumers.

Technical features and series of Kituarmi boilers

Kiturami STS are floor-mounted diesel heating boilers that can operate on kerosene, light petroleum products and waste oil. Minimum consumption fuel and high productivity is achieved thanks to the presence of a turbocyclone burner. If necessary, the burner can be replaced with a gas one.

Kiturami KSOG are double-circuit liquid fuel boilers that can also operate on gas. Operating the equipment does not require special knowledge and skills. The automatic unit copes with this task perfectly. Models in the series are equipped with an electronic remote control, which makes the control process more comfortable.

Kiturami Turbo - boilers designed for heating rooms and producing hot water. Since these are not single-circuit boilers, but boiler-type models, there is no need to purchase optional equipment. Equipped with a thermostat, control panel, a set of sensors and a system for forced removal of combustion products. Have increased level protection.

Diesel boilers from Kiturami:

• provide low fuel consumption and at the same time high heat transfer;
• made of high-alloy steel, which significantly increases service life;
• completely safe to use.

Liquid fuel water boilers are quite complex equipment. You should not install and configure it yourself. We recommend entrusting the installation and connection of the unit to our specialists, who will perform the work quickly and efficiently.

Online store "IC Teplomatika" always high quality

Manufacturer "Kiturami" is distinguished by the fact that with its help you can equip a heating system and use hot water in industrial and residential premises.

Range

Today the company produces exclusively double-circuit boilers, the power of which can vary from 9 to 35 kW. The equipment operates and is optimal solution for and heating. Heat exchangers are made of high-alloy steel, which surpasses other types of similar devices in its characteristics and quality. The heat exchanger can use antifreeze or water and is made of 99% copper, which provides increased hot water performance.

Reviews of diesel equipment from the manufacturer "Kiturami"

The Kiturami diesel boiler, according to buyers, has excellent characteristics, including:

• efficiency;
• reliability;
• safety;
• presence of a self-diagnosis system;
• ease of use;
• possibility of using another type of fuel;
• hot water supply;
• possibility to use hot water.

As for the first characteristic, the diesel boiler is considered one of the most economical among models on Russian market. Today it is quite difficult to find such equipment that would consume only 8 liters of fuel per day. The presence of a turbocyclone burner allows you to achieve the highest efficiency in terms of fuel consumption due to the aerodynamic flow in the combustion zone. Consumers especially emphasize that such devices are reliable and safe, because the manufacturer has equipped them with overheating and temperature control sensors, as well as a control system that monitors the presence of coolant in the system.

If you purchase a Kiturami diesel boiler, you will be able to use the self-diagnosis function. The device has an interactive display, which displays information about the operation of the unit. It is impossible not to mention the thermostat, which shows the state of the system. Among other things, all control functions can be set from the remote control, which can be installed anywhere you wish.

About thermoregulation

The built-in thermostat allows you to regulate the operation of the equipment according to the coolant temperature. According to buyers, the boilers provide the ability to adjust the temperature by degree in the range from 41 to 75 °. If there is a need to switch to another type of fuel, then you can replace the burner.

Technical characteristics of Kiturami Turbo series boilers

The Kiturami Turbo diesel boiler is available for sale in several varieties; they have different power ratings and are capable of heating rooms of a certain area. Boilers also differ in average fuel consumption, as well as in the performance and capacity of the heat exchanger. Diesel boiler "Kiturami", reviews of which will allow you to make right choice, may refer to the Turbo series. The most powerful equipment in this line is a model in which the mentioned parameter reaches 35 kW, this applies to the Kiturami Turbo-30R. But if you need minimal power, then it is best to choose the Kiturami Turbo-13R; for this model, the mentioned characteristic is 15 kW.

The average power is characteristic of the Kiturami Turbo-17R, in this case it is 19.8 kW. The heated area of ​​these boilers is different. If we're talking about about the lowest power, the area should not exceed 150 m2, while for the Kiturami Turbo-17R model this parameter is 200 m2 or less. Coefficient useful action fluctuates approximately at the same level and averages 93%. We must also not forget that boilers of different power consumption consume fuel in a certain amount. If you choose the Kiturami Turbo-21R model, approximately 8 liters of diesel fuel will be consumed per day.

Reviews of Kiturami KSOG series models

The Kiturami diesel boiler may also belong to the KSOG series. In this case, we are talking about high-strength devices that are capable of delivering 465 kW. This equipment is also dual-circuit and consumes diesel fuel during operation. According to buyers, the boilers have a built-in turbocyclone burner, and they can be used in industrial facilities. This is true, because the heated area reaches 4650 m2.

Users like the presence of a self-diagnosis device, as well as special pipes heat transfer. The heat exchanger is made of of stainless steel, and a steel frame is used for transportation and installation, which, according to buyers, is very convenient. By purchasing such equipment, you will be able to use an electronic control unit that has many functions. The manufacturer has provided the possibility of installing a room regulator. That is why the Kiturami diesel boiler can be controlled without leaving the room.

In order to purchase and start using Kiturami diesel boilers, you do not need approvals or permits from authorized services. The only condition is the installation of this equipment in a separate room. The devices are capable of carrying out autonomous operation, and you can control them using the remote control. Each model is equipped with a remote control panel.

Kiturami diesel boilers are available in several types. These include:

• Turbo– this series is distinguished by a power level of up to 35 kilowatts. Despite the fact that the power is not too high, the equipment is equipped with a turbocyclone burner. Unlike other models, it has a low cost. As a rule, they find their application in small houses and dachas, with an area of ​​no more than 350 sq. meters.
• STS– have the same characteristics as the boilers from the previous series, but differ in the body made of stainless steel.
• KSO– are among the high-power devices (up to 465 kilowatts) operating on the basis of diesel fuel. Such models are equipped with a turbocyclone burner and are intended for use in industrial facilities with an area of ​​up to 4650 sq. meters.
• Hi FIN– boilers from this series are made of high-quality boiler steel with a modern, highly economical burner and a new type of Hi Fin heat exchanger. The power of this equipment ranges from 13-30 kW.

Note! All of the above boilers are equipped with an electronic control unit with many functions. The manufacturer has also provided the possibility of installing a room thermostat to control the room temperature.

Manufacturers of gas heating equipment are constantly improving their products. But this type of raw material is constantly growing in price and in many territories settlements it is still unavailable. So people have to look alternative options. This alternative is Kiturami diesel boilers. They appeared on the market a long time ago, but still remain relevant.

Diesel boiler "Kiturami"

Today, Kiturami is already a concern considered one of the main South Korean manufacturers of heating equipment. The company developed from small production, which after 50 years grew into a huge empire.

Such a respectable age allows us to constantly work on improving our products, guaranteeing their highest quality.

Diesel boilers "Kiturami" have repeatedly become prize-winners and have been awarded various diplomas for their impeccable and reliable specifications. Products of the Kiturami concern has international certificates, which gives it the right to be present in markets in many countries around the world.

Maintaining its status as a leader in the production of heating equipment, the Kiturami concern is constantly searching for new forms and content. What types of boilers are included in the Kiturami range?

Kiturami boiler types:

• diesel;
• gas;
• bifuel.

The range of diesel boilers is supported by the Turbo and KSO brands. All diesel boilers produced by the Kiturami concern have positive reviews. The Turbo series was released for domestic needs. Models of these boilers are classified according to heating power and hot water. For example, the Kiturami Turbo-13R diesel boiler produces up to 13 thousand Kcal of heat per hour.

The KSO series is similar in design gas appliances. But, if you replace the burner and electronic equipment, they are quite capable of adapting to a different type of fuel. These Kiturami models are equipped with a turbocyclone burner, resulting in high efficiency and practically complete combustion raw materials. Diesel Kiturami boilers have a simple design, in connection with which the ease of operation and maintenance increases, while the affordable price attracts more and more new consumers.

However, the most interesting development of the Kiturami concern was the bi-fuel diesel boiler. This type of boiler is ideal for areas with unstable electricity supplies, as it can operate on both liquid and solid raw materials. At the same time, when wood or coal burns, the dual-fuel boiler automatically starts burning diesel. Diesel the Kiturami boiler has a forced circulation system, due to which there are maximum efficiency indicators. These designs are made in two versions, which differ in power:

• model KRM-30R;
• model KRM -70R.

Advantages and disadvantages of Kiturami boilers

The products of the South Korean concern Kiturami are different:

• high quality;
• modern design;
• functionality;
• reasonable prices.

The most popular models are Kiturami STS diesel boilers. These are powerful devices capable of heating a room up to 190 square meters. The fuel for such models can be kerosene or light petroleum product. If the burner is changed, gas may act as fuel. The advantages of this device include the available security sensors, which act as a controller of all important processes. They are manufactured using a unique technology for removing combustion products.

The Turbo series includes diesel heating boilers floor type, which cope with two tasks at once, namely, they heat the room and heat the water for economic needs. At the same time, the owners no need to purchase additional equipment, because this device has a boiler-type system. The undoubted advantages include high level protection, it is achieved by working:

• sensors;
• control panel;
• thermostat;
• exhaust gas removal systems.

The advantages of all equipment from the Kiturami concern are its durability under different conditions operation. This quality is especially pleasant for domestic consumers. Since the Kiturami company has many dealerships, it is not difficult to obtain failed parts of the Kiturami diesel boiler.

Kiturami diesel boilers have a number of advantages over similar products from other manufacturers. Data on diesel fuel consumption the devices have high efficiency indicators- per minute, at average productivity, the device creates 20 liters of hot water.

But the biggest achievement of the Kiturami company is the market of relatively low prices. A kiturami diesel boiler will cost 20–30 thousand rubles. In addition, the range of diesel equipment is quite wide, due to which the demand for it is high both among private home owners and industrialists.