DIY hanging shoe rack. How to make a shoe rack (shoe rack) with your own hands

When entering a house or apartment, the first thing we do is take off our shoes and, in the cold season, outerwear. Placing outerwear never causes problems, but with shoes the situation is different. This problem especially concerns large families, as well as owners of extensive shoe collections.

An ordinary person wears at least two pairs of shoes per season, and if there are three or more people in a family, then it turns out to be at least 6 pairs of shoes, or even more. But don’t forget about out-of-season shoes, which should also be stored somewhere. The problem of storing shoes is most often faced by owners of small apartments and small hallways. The solution to this type of issue is to install shoe shelves, and if your budget is small, then you should make a shoe shelf with your own hands. Making a shelf with your own hands will not only save your budget, but will also give your hallway individuality and exclusivity.

Before choosing a shoe rack, you need to calculate how many pairs you will have in it. The number of pairs of shoes directly depends on the number of members in your family. The main types of shelves for shoes include Bona, Slim, Coupe, Cabinet, as well as Shoe rack - overshoe rack. The slip is a kind of showcase with doors and holes for air supply; it is practical to use and has a lot of space for storing shoes. Slim type shelves are made directly from wood; it is advisable to place already dry and clean shoes in them, so as not to contaminate the lower shelves; this is not very practical and causes some discomfort.

A Coupe-type shoe rack is very practical; often such shelves are made individually to fit the width and length of the hallway, so they fit perfectly into any interior. The Coupe shelf is usually high, but not deep and must have sliding doors (otherwise it will not be a compartment); due to the shallowness of the closet, the shelves in it are located at an angle (which allows you to put high-heeled shoes on them).

Shoe shelf Cabinet - often has a compact and small size (only seasonal shoes fit in it), often such a cabinet has hinged doors, as well as 2 or 3 horizontal shelves, a soft ottoman can be located at the top.

Shoe shelf Galoshnitsa is the newest invention for storing shoes, you can not only store, but also dry shoes in it, it can be installed not only in hallways, but also on balconies or storage rooms, it looks like a cabinet.

DIY shoe rack

A shoe rack can be made from any available materials; if desired, it will turn out no worse than many expensive shelves sold in stores.

The most budget-friendly option is a shelf made from cardboard boxes, which are found in every home. For such a shelf you will need one large or several smaller boxes. Such a shelf will be relevant in the case of a very small hallway, because it will take up minimal space. We make blanks; to do this, use a pencil and a ruler to mark rectangles 30 cm long and wide along the entire side of the box. Then we cut out the future shelves with a special knife or scissors. Then we take our workpiece and fold it into three equal parts, after which the side parts should be folded into a triangle. There should be a pocket, so we fold all the blanks. After that, we arrange the prepared pockets on top of each other, leaving a groove for shoes between each, and then carefully secure everything with tape. For reliability, all pockets can be secured together with staples. It is recommended to mount the resulting structure on a cabinet or wall in the hallway. Also, such shoe pockets can be painted in different colors, or in one desired color, which will give your hallway bright and unusual colors.

The next type of shelf for shoes that you can make yourself is a carousel shelf. This shelf can be placed in any standard closet you have in your home. The shoe carousel will be made of four rotating shelves, always round. Wooden pegs will be inserted into the round shelf in a vertical position. The shelves themselves will be mounted on a metal rod. To make such a shelf, you will need tools that almost every home owner has at hand. We will need a cabinet of standard sizes, with a depth and width of 60 cm, and a height of about 190 cm; for shelves we will need 4 disks with a diameter of no more than 55 cm, as well as 9 disks with a diameter of approximately 10-12 cm. To hold shoes there will be you need round pins (022): 18 pieces 35 cm long (1), 24 holders 30 cm each (2), 16 pieces 25 cm each (3), as well as 32 holders 20 cm each (4). To support the shelves you will need a metal pipe with a diameter of approximately 40 mm and the height of the entire cabinet.

On one round shelf we should fit 9 adult and 12 children's pairs of shoes. It all depends on your desire and imagination, because it is up to you to decide how many holders you need to install on one shoe shelf. For greater efficiency, you can make shelves with different numbers of holders, for example, on 2 shelves you can place 12 pairs of shoes (for children’s shoes or small ones), and on the other 2 shelves, 9 pairs of shoes (for large shoes). This shelf can be painted in any color, or varnished. It is best not to paint the surface of the supporting parts; this will allow your shelf to slide easily.

A shoe rack with your own hands can be made in two ways: it is assembled from directly purchased parts, or it is made by yourself. Assembling a shelf from ready-made elements is quite simple; these types of shelves are sold in many stores; you just need to assemble it at home according to the instructions provided. It is also possible to assemble a shelf from specially manufactured components, but according to your own personal design. What can we say about making a shelf yourself, it is much more complicated, and it takes a lot more time and effort, but you will definitely be confident in the quality of such a shelf.

To make a regular shoe shelf, we will need two 85 cm boards, 6 5 cm long and 3 cm wide bars (they will act as supports for shoe shelves), as well as 4 70 cm boards (for shelves). This shelf can be made in two versions. One is the uniform distribution of 70 cm boards over the entire height (the top one is 5 cm lower from the side walls), so we will have a shelf for shoes with four shelves. You can make 3 shelves for shoes, and the top one for a seat. Moreover, the seat can be made into a soft pouf by purchasing foam and upholstery fabric in advance (the upholstery can be done using a mounting stapler). Upon completion of the work, such a shelf can be coated with several layers of varnish, or painted in the color of your choice.

What a wide variety of shoes in stores and markets! The female half cannot resist buying new shoes to go with a new dress. For men there is a choice of practical shoes and there are a lot of them too. How much inconvenience do shoes cause in the hallway? Where should I store all this at home?

The solution can be found in a furniture store, namely, buy a shoe rack or make it yourself.

Some people have a small apartment and a narrow small hallway, while others spacious house. Some live with adult children and grandchildren, while others live alone. Hallways, like families, are different, so typical pieces of furniture do not always suit a specific room. A comfortable shoe rack, created with your own hands, will help solve the problem of choice.

With it, your hallway will be transformed into a stylish and comfortable one. business card Houses.

How to choose the right thing? First, let's get acquainted with the types of furniture such as shoe racks.

1. Shoe wardrobe.

It is very convenient in small rooms, since the doors move apart and can be combined with the main wardrobe for clothes.

1. Showcase-rack with doors.

You can place shelves along the entire wall, any size of shelves, but the disadvantage of such a shoe rack is instability.

1. Slim-format cabinet.

This cabinet has hinged doors at an angle of 45-90 degrees. And the name speaks for itself. This type of furniture is “thin”; shoes will be located at a slope.

Tall over-the-knee shoes may become deformed on such shelves.

1. Galoshnitsa.

More suitable for a balcony. Shoes dry quickly on such shelves, but they are inconvenient to store.

1. Rack.

It is the simplest design, but unstable and unaesthetic for the hallway.

1. Cabinet-cabinet.

The most common and practical shoe rack.

Advantages:

• With tenacity;
• M multifunctionality;
• K compactness;
• E aesthetic.

A closed shoe rack is suitable for people with pets. It will help protect your shoes from any damage from pets.

For the cabinet you can make folding, sliding or regular doors. So it will take up little space. A shoe rack made from laminated chipboard will be durable and will not fail for a long time.

Wooden models are easy to make with your own hands, which saves the family budget.

Shelves and drawers in the closet can be made to suit any type and size of shoes. And on top there is the opportunity to make a table or cover it with fabric, a shoe rack with a seat in the hallway will come out.

The seat replaces an ottoman or stool for convenient changing of clothes.

Types of materials that can be used for shoe racks:

Metal and wood make the cabinet heavier; shoes in plastic will not breathe. MDF is a good choice, but not cheap. Most suitable material for storing shoes- Chipboard. Does not weigh down the shoe rack and is easy to assemble.

Today it is the most popular material in the shoe furniture segment.

And so, let's focus on a cabinet cabinet made of chipboard.The tools we need are:

Preparation of parts

Instructions for assembling a shoe rack with your own hands

Thickness of the chipboard + Width of the planned shelf + Half the thickness of the chipboard.

For example, a part is 12mm, shelf width is 300. It turns out: 12+300+6=318mm.

We do this from the right and left edges. Transfer the drawing directly to inside Chipboard and sign each detail where it will be located. Then you won’t confuse anything during assembly.

When marking the holes for the height and width of the shelves, you need to take into account the back part, since on this side the entire view of the cabinet is located in the same plane.

1. Inside, the shelves will be supported by shelf holders. You need to drill holes for them. To calculate correct location These holes must be subtracted from the height of the rack for each thickness of the partition and divided by the number of shelves.

To the result obtained, add the thickness of the shelf and half the diameter of the shelf holder.

For example, the height of the rack is 600 mm. Two shelves are planned. Shelf thickness 12 mm. The diameter of the shelf support is 5mm.

The calculation procedure will be as follows:

600-12=588

588/2=294

294+12+2=308

Therefore, you will need to measure 308 mm from the top.

After the holes are drilled, you can install the shelf supports by filling them with glue and nailing them with a hammer.

Assembling a shoe rack according to a drawing with your own hands

When all the holes are made, you can begin assembling the confirmat. We attach the middle posts to the bottom part, then the outer ones. Make sure there are no protrusions at the corner joints.We attach the lids to the corners, put the shelves on the holders and install the finished drawers on the guides.

We attach furniture handles to the doors in any location. They can also be attached to awnings, or you can install sliding ones.

Decorating a homemade shoe rack can be varied.

Hand-made furniture always distinguishes the interior from other apartments where there are typical chests of drawers and wardrobes.

VIDEO: DIY shoe cabinet.

Even a small amount of untidy shoes in the hallway creates a feeling of untidiness and disorder. But what if the family is large and there are a lot of shoes? What if the corridor is narrow? In such a situation, spacious and non-bulky shoe shelves will save you. With their help, you can compactly place all your sandals, shoes, boots and boots, saving space in the lobby. We suggest organizing free space in the hallway and making a spacious shoe rack. Moreover, a DIY shoe rack is a great opportunity to show off your carpentry knowledge and skills, because its design is extremely simple.

One more positive thing The advantage of making a shoe stand with your own hands is the availability of materials from which you can make it. In addition, if you use available means and materials to make it, you will be able to significantly save your family’s budget.

Wood is the most common and accessible material for creating any homemade furniture, this also applies to shoe racks. Options for making shelves from chipboard or MDF, from boards or furniture panels. You can make a budget shelf if you make it from plywood with your own hands. Opt for high-quality birch plywood.

In addition to suitable material, you will need a standard set of carpentry tools:

• hacksaw or jigsaw;
• sandpaper or sander;
• drill;
• screws and metal corners for fastening the structure or furniture ties;
• special protective agents for processing wooden products.

The first thing you need to think about is the drawings and diagrams of the shelf or rack you like. You can draw them yourself or find suitable ones on the Internet and adjust them to your size.

So, everything is prepared to create a shelf for shoes made of wood, you can get to work.

For residents small apartments The issue of shoe placement in the hallway is very acute. Families with children know what it means to have shoes scattered throughout the apartment. The problem is no less pressing for those who like to select a variety of accessories to complement their look. To maintain order in your home and conveniently arrange each pair, it is not at all necessary to buy expensive shelves from the assortment of furniture stores. Make convenient devices for storing shoes you can use available materials, if you show your imagination. Here are some examples for inspiration.

Simple wooden nightstand

Making such an interior item is quite simple. The four boards are connected to each other using furniture screws. Thin ones are attached to the cabinet facades wooden planks. The best paint for painting is water based. If desired, the upper part can be made contrasting and adapted for sitting.

You can simply hang your shoes on the shelf!

The idea is brilliant in its simplicity. So as not to stain the floor dirty soles boots and sneakers, you just need to keep them suspended.

Wooden pallet shelf

They make a lot of things out of such an affordable and practical thing as pallets. They are also suitable for making shoe racks. Building such a piece of furniture is quite simple, since parts of the pallets for the hallway can be left untreated.

Ladder instead of a shoe cabinet

For this idea it will work as a ready-made wooden staircase, and made independently from planed boards. The main thing is that the steps are located at an angle so that shoes do not stain the wall.

Rack of boxes

Wooden boxes are another universal remedy for lovers original furniture. If you place the boxes vertically, they are suitable for storing high autumn and winter shoes. The side surface can be adapted to store keys, hoopoe accessories behind shoes and other useful little things.

Rack for shoes of different heights

In spring and autumn, the weather is very changeable, and shoes of almost all seasons can be relevant. Such simple design with shelves different heights allows you to store autumn boots next to sandals and sneakers.

Bee hive

Very original design can be created by combining several wooden hexagons, each of which is suitable for storing one or even several pairs of shoes, depending on their size.

Shelf with French chic

An ordinary piece of furniture can become a real hallway decoration if you glue a special film or paper with text printed on the back of the shelf. With this design, it is better to choose a neutral color for the shelf itself.

Skateboard shelves

True skateboarding fans always have a few old boards that have fallen into disrepair. As a last resort, you can turn to fellow hobbyists for help. Multi-colored shelves are great for storing sports shoes.

Shoe organizer

The design of shelves of different heights allows you to store shoes for different weather conditions. A small mirror in the hallway will allow you to evaluate your image before leaving the apartment.

Farmhouse style bench

It is very convenient to store shoes in closed drawers located on the shelves of the bench in rustic style. This storage method gives the hallway a neater look, since shoes are hidden from view.

Full wall shoe cabinet

So that the design does not seem cumbersome, it is better to choose boxes from thin plywood and arrange them in the form brickwork. The strength of such a locker ensures wide board, to which individual shelves are attached.

Diagonal shelves

By placing the usual wide shelves diagonally, you can significantly save space in the hallway.

Copper pipes

An original piece of furniture can easily be made from pipes left over after a bathroom renovation. To attach the shelf parts together, special adapters from a plumbing store are suitable.

Dynamic design

Bars of the same size are attached to the wall using special movable corners. When folded, the structure is decorative panel, and if necessary turns into space for storing shoes and accessories.

How to save and make original stand under your own shoes - find out here!Ideas, useful tips, manufacturing instructions.

Making a stylish shoe stand with your own hands

A beautiful shoe rack can become not only a place to store shoes, but also a full-fledged element of the hallway interior. The choice of options in stores is extensive, but the prices are often overpriced. To make a roomy and compact shelf For shoes that fit perfectly into the look of the corridor, you need to put in a little effort and imagination. Let's consider options for making shoe racks from available materials with your own hands.

Types and purposes of homemade shelves for the hallway

Before installation, be sure to measure the space where you plan to place the shoe rack. For small hallway ideal option there will be a narrow (20-30 cm) and high shelf; in a more spacious room, a closed cabinet with a width of 60-90 cm will look good.

Should the shelf be closed? If you want the hallway to look more aesthetically pleasing, this is a good option. Do not forget to regularly ventilate closed shoe racks, otherwise you will not be able to avoid unpleasant odors. This problem can also be solved by installing a lamp inside for drying and disinfecting shoes.

The advantages of homemade shoe shelves are obvious:

• you can use eco-friendly materials;
• the cost of a homemade shoe rack is several times less than in a store;
• You can make a shelf for a hallway with a non-standard layout.

The design of a shoe rack directly depends on its purpose and the number of residents. Here are some popular and practical options:

There are many options for making shelves. The interior can be decorated with shelves made of metal, in particular aluminum; processed clay shelves, dense oak, and glossy plastic look very beautiful. The material of manufacture can be anything, as can the configuration of the elements. Based on the type of installation, shoe racks can be divided into several types.

Materials and tools for making shelves

From the selected material for manufacturing shoe shelf depends on its service life and ease of use. For example, a shelf of cardboard box make it easier than ever, but it won’t last long. But as a temporary option it will work great.

When choosing wood as a material, you should take care of the final treatment of the wood with varnish or paint to ensure an attractive appearance preserved for a long time. There is no universal set of tools, due to the peculiarities of installation and material. But you will probably need the following tools:

• electric drill;
• glue;
• simple pencil;
• sandpaper;
• mounting hardware;
• screwdriver;
• wood hacksaw;

You will also need varnish or paint, the color of which is selected to match general interior hallway

How to make a shelf with your own hands

Before starting work, it is worth drawing an approximate layout of the future product, where you also need to indicate the dimensions. After this, they begin marking on the material, where they indicate the location of the fasteners (if any), the required length and width. Here are a few useful recommendations:

1. When creating a simple shelf for shoes, you can do without using metal fittings - all elements are fastened with self-tapping screws.
2. The doors are easy to install if you use awnings.
3. Materials should be treated with varnish or painting before assembly. If you do this after, the layer will be uneven, and the procedure itself will be problematic. The process of assembling a shelf for shoes depends not only on the design, but also on the complexity of processing the material, and the features of working with it.

Wooden shoe rack

First of all, a shoe rack should have small dimensions, but at the same time accommodate a sufficient number of pairs of shoes. This is its integral feature. Materials from which you can build this design, many, but the main one is wood. Unlike chipboard and MDF, it will not unstick or swell when exposed to moisture. To do this, the wood should be varnished or painted.

What will you need?

Basic kit for making: wood, glue, screws, glazing beads, varnish or paint. Tools you will need: saw, screwdriver or screwdriver, hammer, sandpaper, drill. Beads, screws, and drills are selected in accordance with the size of the structure. Self-tapping screws need to be small, but capable of being firmly fixed in the structure. Please remember that wood may crack or split if wrong choice screw size.

Assembly of the structure

A depth of 35 centimeters will be sufficient. This distance is enough to accommodate almost any shoe. This will be the length of the sides of the structure. You need to saw off 6 elements of 35 cm each. You can determine who in the family has the most big size shoes, and measure the distance along it, leaving 1 cm in reserve. Then you need to distribute 4 bars on one of the elements and make a cut to the depth of the bars. The bars must be spaced evenly.

Each shelf should be able to accommodate 3 pairs of shoes, so its length must be determined based on the 3 largest pairs of shoes in the family. 4 pieces of this length will go on each shelf. To connect the elements, it is necessary to cut out recesses. These places must be secured with self-tapping screws. For a more aesthetic appearance, you can drill holes and use glazing beads and glue that will hold the shoes without any problems. This operation is similar for each shelf. After this, sand the tops of the side panels with sandpaper.

Any height can be set, but a reasonable limit is no higher than 80 cm. High shoes should fit in one of the compartments of the structure. The distance between the shelves (between the floor and the first shelf) should be 30 cm. All connections are made in the same way.

Practical shoe rack made of chipboard

To make a simple shelf for shoes from chipboard, you need to take two sheets of canvas (the dimensions are determined based on the space in the hallway). Will need fiberboard sheet for the back wall. The assembly algorithm is simple:

• We attach the bottom and the shelves themselves to the two side walls. For the screeds, use a drill (8 mm drill); at the end, use a drill with a diameter of 5 mm.
• The folding element is secured with medium-sized self-tapping screws;
• Top part fastened with 4*30 self-tapping screws;
• The shelves are mounted inside;
• Fasten back wall products.
• This is a budget and uncomplicated option that can be used in any hallway layout.

Beautiful laminate shoe rack

If, after renovating your apartment, there is still unused laminate, you can use it to make a stylish and compact shelf that will fit seamlessly into any design. For production you will need laminate sheets, the number of which depends on the tier and metal pipes with slots. They can be made using a metal grinder. If desired, the structure can be made to any height; for safety, the edges of the tubes are sealed with plugs.

From profile

An interesting option are shelves for shoes made of profile and tempered glass (or wood). For manufacturing you will need the following tools:

• glass cutter;
• jigsaw;
• Bulgarian;
• level;
• electric drill for metal;
• screwdriver

You can use a regular colored profile or a galvanized one; the second option will be more reliable, as it is resistant to moisture.

Step-by-step instruction

• The profile is attached to the wall with one self-tapping screw;
• Using a level, check the horizontalness of the markings;
• Screw in the remaining screws;
• The frame is assembled;
• Already cut shelves are attached to the frame.
• This option will look good in a Hi-Teck design.

Simple shoe rack made from boxes

The presented design is able to withstand a lot of weight, despite the fact that cardboard is a fairly flexible material. To make it, it is advisable to use boxes from household appliances. Depending on the height and width, take required amount boxes The structure is attached with glue, tape, a stapler or another method. The finished shelf can be decorated as your imagination dictates. There is one drawback - this shelf is only suitable for summer shoes.

Corner shoe stand

The most suitable material for creating corner wooden shelf for shoes - larch. It tolerates dampness well and is easy to use.

First, we decide on the size and design of the shelf, draw a diagram and calculate the required amount of material.
For creating corner shelf necessary following materials and tools:

• two boards up to 2 m long (the ends of the boards can be rounded or cut with a wave);
• shelves cut from the same board (in this case, the shelves can be cut different sizes and forms);
• jigsaw for cutting;
• plane and sandpaper for leveling;
• corners and screws for connecting parts;
• level to check the accuracy of the design;
• antiseptic;
• varnish or paint.

The boards must be sanded and treated with an antiseptic, varnished or painted. Varnish is chosen if you want to emphasize the naturalness and structure of the wood, paint - if preferred rich colors and when deciding to use special design techniques with color play.

Construction connection

To create a lightweight structure, the two main boards are not attached to each other: they are installed at an angle and connected using shelves. First, the lower shelf is attached, then the upper one, the structure is installed vertically and its evenness and stability are checked. Then the remaining shelves are installed.

The space between the shelves must be sufficient, otherwise there will be a feeling of crampedness and congestion.

Decorative elements

To further decorate the shelf, you can use thin decorative slats cut out yourself. Or purchase a decorative wooden lattice partition, and after sawing it, decorate the shelf by adding carved stops.
Using decoupage or aging techniques in painting will also add a fresh touch to the interior of the hallway. Bright color solutions may be relevant to complement the interior.

Making a carousel shelf

The carousel shelf takes up little space and at the same time can accommodate many pairs of shoes. To make it you will need: fiberboard, metal pins and screws.

How to do

Blanks in the form of circles and quadrangles are cut from fiberboard. Using a compass and a rod, markings are made for the pins.
Discs for stands are fixed with discs smaller diameter, which are located at the required height.

Prepare the bottom, on which quadrangular blanks are installed, attached with a corner. The bottom circle is conventionally divided into 3-4 parts (space for 3-4 pairs of shoes on the “floor”).

To make a shoe shelf, you can use your imagination and then the most interesting ideas come to mind. unexpected decisions. Here are a few ideas that will be of interest not only to independent use, but also as a gift for loved ones.

On video: DIY shoe rack from an old closet