Beach sun canopy made of metal-plastic pipes. Do-it-yourself polypropylene canopies for relaxation

In the summer, you can’t do without a light canopy or gazebo at the dacha, where you can hide from the shade and eat on fresh air. But wood or metal are expensive and not available to every owner. A budget alternative is a gazebo made of PVC pipes. The design of them will be light, collapsible, and production will not take much time and labor.

Benefits of using plastic

The basis of the structure can be ordinary water pipes, fastened together with fittings or other elements. They won't cost much.

In addition, among important advantages their applications are worth highlighting:

• resistance to environmental influences;
• long service life;
• parts are easy to replace and the structure can be disassembled;
• ease of installation;
• speed of assembly;
• low price;
• no need to make a foundation;
• the material does not rot or rust;
• the gazebo can be made in accordance with the style of landscape design.

But when starting to make it, you need to remember that this is a shelter option only for the warm season. In winter, the structure should be removed from the street - during severe frosts, the plastic begins to deform.

When purchasing pipes, pay attention to whether there is any odor coming from them. If yes, then it is better to discard this product immediately, otherwise the smell will emanate from the finished gazebo.

Selection of polypropylene pipes

For simple structures, you can use metal-plastic, propylene or polyvinyl chloride (PVC) pipes. Thickness and sizes vary. The choice depends on how massive the structure you decide to build. It is better to connect the parts together using a soldering iron or fittings.

All types have good flexibility, which allows you to make a gazebo in the shape of a ball, semicircle, trapezoid.

If we compare the strength of the material, then metal-plastic wins significantly. Due to inner layer Aluminum pipes do not expand under high temperatures, so their service life is longer. The parts are connected using two fitting methods:

• crimping;
• press

But metal-plastic costs several times more. For budget buildings, PVC pipes will be sufficient.

Summer gazebo projects made from PVC pipes

Thanks to the flexibility and lightness of the material, creating a structure of even a complex geometric shape is not difficult. The arc-shaped design is popular. It is also used as a basis for construction:

• pergola;
• greenhouses;
• carports or outdoor barbecues.

In this case, the roof can be single- or multi-slope.

Users often search:

The future construction is depicted on paper in the form of a diagram. Next, several sketches are made from different angles. The project specifies the materials for the roof deck, wall cladding, the dimensions of each element, and calculates the total costs.

How to make a gazebo with your own hands from water pipes

Let's look at each stage of work in more detail.

We prepare materials and tools

We will need:

The following types of fittings are useful:

• corner – for connection at an angle of 90 0;
• tees - fix three pieces of pipe at right angles;
• extension - for fastening three pipes at 180 0.

Cutting polypropylene to size

When the design drawing has been developed and all materials have been purchased, you need to start cutting the parts for the structure.

For the convenience of cutting PVC pipes, it is advisable to purchase special scissors, or use a hacksaw for metal

Ordinary metal scissors cannot cope here, so you need to take precision ones with a ratchet-cutting mechanism. They can easily fragment pipes with a diameter of 3 to 40 mm.

Since the blades of these scissors are made of the highest class of alloy steel with a serrated blade, the cuts are smooth and without burrs. No effort required. Everything is done with one hand.

Assembling the gazebo frame

The procedure is as follows:

If the owners want to move the gazebo to another place in the future, then they can do without installing supports, but simply make the lower piping from pipes.

But a significant drawback of such a plastic frame is its instability to wind and rain.

Wall decoration

The choice of material depends on the budget of the owners.

Popular finishing options:

• polycarbonate;
• polyethylene film;
• awning or tarpaulin;
• curtains.

In the last two cases, for better fixation, it is better to sew loops to the fabric. To do this, use thread with a needle or construction stapler. If you choose fabric for covering, it must be waterproof. Shower curtains are also suitable.

Users also search:

Polycarbonate fasteners are already installed finished building. This will require special thermal nuts and sealant. Such a building can easily withstand the rain, but it is also more difficult to disassemble.

You can plant wild grapes around the perimeter of the gazebo. Once expanded, it will create shade.

We carry out roofing

Fittings mounted in the top trim make it possible to design a roof of any design.

Photo: greenhouse at the dacha. The principle of assembling the frame is the same. Differences in the geometric shape of the structure and wall cladding.

This is how standard water pipes are in in capable hands turn into an original summer gazebo in the courtyard of a private house, without requiring special investments or professional skills from the owners.

Hello, dear readers! If you take a close look at the objects around us, using your imagination, you can find at least several uses for each of them. It would seem, well, what can be made from PVC pipes, because they are used exclusively for the installation of sewers, in fact this material just a godsend for craftsmen. After all, the most simple pipes PVC can be quite easily and quickly transformed into incredible household items; below we have prepared a whole selection for you current ideas on this topic, and of course, each idea is supported by photographs for clarity.

What can be made from PVC pipes.

How to give one shape or another to PVC pipes.

In order for the pipe to be bent or flattened later, it must be heated gas burner, and immediately give the required form. As a last resort, if there is no burner in the house, you can heat the tubes over the fire gas stove. And you can cut the pipes with a metal saw or jigsaw, you can connect all the parts using cold welding(for this you need to purchase a special adhesive composition).

1. Car trunk.

This kind of car trunk can be built from water pipes. A bicycle holder for a car looks no less interesting.

2. Bed side.

To prevent your child from falling out of bed at night, you can make an improvised side.

3. Barrier for the doorway.

This kind of gate can be made on the doorway, so that the child will not be able to leave the room.

4. Vase and flower pots.

By cutting a cylinder of the required length from the pipe and pasting it with a self-adhesive, effective film, you can end up with a wonderful vase, inside of which you can place a glass of water and put fresh flowers.

5. New Year's decor.

Festive wreath.

We cut pipes of different diameters into small cylinders of equal length, glue them together to form a wreath, and paint suitable paint from a spray can, drill holes on top and thread a rope, hang the wreath on the wall, and put small ones in several cylinders New Year's balls.

Wall tree.

We take pipes of different diameters and cut them into cylinders of the same length. We prepare a canvas, glue cylinders onto it, forming the outline of a Christmas tree, create a footrest from a large pipe, hang the composition on the wall, and put various Christmas tree decorations in different cylinders.

6. Children's waterfall.

To harden a child, you can prepare such an impromptu waterfall by connecting two hoses with water turned on to the footrests of the product, and making holes for water drainage in the top bar.

7. Children's house.

Children love to build various houses, huts and other shelters; you can make their task easier by preparing a frame from PVC pipes and sewing a cover from waterproof fabric.

8. Pool awning.

In addition to creating shade, such an awning can also serve as a goal for water polo.

9. Holder for glasses.

Great idea for a street bar, a slot is created in the pipe along the width of the stem of the glass, holder legs are screwed on top, with which the structure is attached to the ceiling surface.

10. Place for bicycles.

Such a “stall” for children’s bicycles or scooters will help keep the yard in order.

11. Cells for wine bottles.

In large cylinders of pipes glued together you can store bottles of wine.

12. Drill stand.

The drill stand will help you create identical holes in strictly defined places on your products.

13. Ladders for cats.

Cats are very active creatures that value freedom, so in confined spaces they begin to waste away, to prevent this from happening, they need to be constantly occupied with something, and this one will help in this matter interesting design with slides, ladders and crossbars.

14. Vertical beds for strawberries.

In a PVC pipe, using a drill with a special round nozzle, you should drill large holes, then bury the pipe in the ground, and pour soil into it, and then plant it in round holes strawberry seedlings.

15. Stand for kitchen appliances.

These pipes can make a wonderful stand for forks, knives and spoons.

16. Stand for scissors, pencils and tools.

Pinned to wooden plank pipe sections can serve as pencil holders. And vertically located cylinders can serve as a supply for tools. To prevent tools from falling down, the bottom of the pipes can be foamed polyurethane foam.

17. Laptop stand.

These pipes can make a wonderful laptop stand, especially since not very many parts are required, just a few pipes and connecting elements. Finally, the product can be painted from aerosol can in any color.

18. Cells for shoes.

Summer shoes can be stored in tube cells, and to make them look more presentable, they can be covered with a suitable adhesive film.

19. Organizer for scarves and underwear.

Stores sell special containers with compartments in which you can store linen or other accessories, but you can create such an organizer yourself by simply cutting PVC pipes into shallow cylinders and gluing them together.

20. Partition for climbing plants.

From such pipes you can create entire fences or partitions, along which you will subsequently weave climbing plants.

21. Stand and holder for a curling iron or hair dryer.

Thanks to such stands, the hairdryer, straightening iron and curling iron will always be in their places. And also, after use, you don’t have to wait for the curling iron or iron to cool down.

22. Enclosure for dogs and other domestic animals.

To prevent newborn puppies or kittens from wandering all over the place, you can build a small enclosure for them. Well, for more active animals you can create a large, full-fledged enclosure, not forgetting to cover it with netting.

23. Holder for watering hose.

To keep your garden hose from getting tangled under your feet, you can store it on this great stand.

24. Frame for a summer gazebo.

Continuing the theme of what can be done from pvc pipes, we want to show you a great seasonal idea for a gazebo. This design You can cover the top with an awning or hang light curtains on the sides, which will billow effectively every now and then even with a light breeze.

25. Frame for an outdoor cinema screen.

Fans of watching movies with friends will appreciate the idea of ​​an outdoor screen; its frame can be made from PVC pipes, and the screen itself from the remains of matte stretch ceiling.

26. Skittles.

Children will be delighted with this mini bowling alley.

27. Puppet theater.

To create such a children's theater, you just need to assemble the frame and hang the curtains.

28. Sandbox stand.

It will be more comfortable for a child to play in a sandbox if it is raised above the ground, and sand will not get into the baby’s shoes or clothes.

29. Rack.

Such a rack will allow you to keep the room in order, as it can accommodate an unlimited number of things and toys.

30. Frames for pictures and mirrors.

Rings glued together, cut from PVC pipes, will ultimately serve as a wonderful frame for a picture or mirror.

31. Lamp.

Lamps made from water pipes look very beautiful, especially if the pipes are decorated with rhinestones or complemented with shaped slots. To realize the idea, a base with a light bulb is installed in a pipe with pre-created beautiful and elegant slots, and with reverse side The product creates a hole for the wire to exit; all that remains is to plug the lamp into an outlet and enjoy the interesting, muted glow.

32. Table.

You can assemble a wonderful table from PVC pipes by covering it wooden table top or build a bench (at the end of the article there will be a video on how to make a bench from such pipes).

33. Chairs.

These pipes make excellent garden chairs, smooth lines can be achieved if you heat the pipes with a gas burner and press them with your hands the required form and leave it to cool in this state. But even an ordinary geometric chair will look great; the seat can be created from ordinary chintz or cotton fabric. But you can go further and create folding chairs that will be very appropriate on vacation, for example, while fishing.

34. Clothes dryer.

Such a portable clothes dryer will be very useful in the household, because if necessary, it can be removed from view, and also moved from the shady part of the site to the sunny one. If it suddenly starts to rain, don’t run to remove the still wet clothes, but simply move the dryer under the canopy. Some advantages.

35. Transport.

Their PVC pipes can be used to create a full-fledged children's transport or trailer; children will be delighted with such cars.

36. Football goal.

Children can play football freely with such excellent goals.

37. Chaise longue.

Perfect solution for a summer residence - sun loungers assembled from PVC pipes; a sunbed can be sewn from thick fabric.

38. Screens and partitions.

Notice how fashionable a partition made from PVC cylinders looks; to do this, you need to cut the pipe into equal sections, and then build a partition out of them, gluing each cylinder to each other.
A screen made of PVC pipes, which is a screen with stringed curtains, looks no less interesting.

How to make a bow from PVC pipe:

How to make a bench from PVC pipes:

Dear readers, today we showed you what can be made from PVC pipes, as you can see there are a lot of ideas, all that remains is to choose the right one for yourself, and slowly bring it to life.

The “Comfort in the House” website reminds its readers that you can subscribe to receive notifications about the release of new reviews (you can subscribe to the newsletter through the form in the sidebar).

Not everyone can afford to purchase a light and comfortable canopy for a summer house, car or outdoor recreation, paying 30-40 thousand rubles for it. However, everyone needs to hide from the sun and rain, so savvy summer residents have come up with several ingenious designs consisting mainly of PVC pipes. Such canopies are no worse, and perhaps even better, than their factory counterparts. We’ll talk about them in the article.

Design options for such canopies

“Experienced craftsmen” have long understood the value of PVC pipes as a material for a variety of crafts. From plastic pipes they make chairs, benches, greenhouses and greenhouses, gazebos and canopies; there are a great many options for using this flexible and pliable material. We also decided not to lag behind in this matter and offer you several of the most popular canopy designs, made with our own hands using PVC pipes

Arched canopy made of PVC pipes. This is perhaps the most popular country and tourist canopy made from PVC pipes. Even a child can make it, since it consists of two long PVC pipes bent into an arc and dug into the ground. Between the arches there is a piece of fabric that will act as a roof. Such a canopy is quite stable and will protect well from the sun and light rain, although in windy weather it is, by and large, useless.

For your information! Shower curtains can be used as a roof for such canopies.

Portable arched canopy made of PVC pipes. This canopy is both more interesting in appearance and more complex in design. This canopy consists of several bent and intricately interconnected PVC pipes. For such a canopy, not only soft, but also hard roofing is acceptable. This canopy is distinguished by the fact that in a single structure there is not only a frame for supports and a roof, but also a frame for benches and a table, which makes it look like a gazebo, hence the name gazebo canopy.

Easy collapsible canopy for the car their PVC pipes. This canopy is good because it can be assembled and disassembled by one person in about 1 hour or even less. Its supports consist of eight PVC pipes, which are attached to the roof frame as a single unit and dug into the ground to a shallow depth.

Any weather-resistant fabric, such as tarpaulin, is used as a roof for such a canopy. Hard roofing is not used. The canopy should not be operated when wind gusts exceed 15 m/s, although if it falls, there will be no harm to the car, since it is light.

Lightweight canopy made of plastic pipes with a bench. This type of canopy is good because it is small and can be stored, for example, in a barn. In hot weather, you can take out such a canopy, sit under it on a bench and enjoy reading a book. The bench under the canopy is bent from several thick PVC pipes, the roof frame is made of thinner and more flexible pipes, and a woven fabric is stretched over it. This canopy can accommodate two people.

“The simplest awning” made of plastic pipes. The design of the canopy is quite simple. Two long plastic pipes and two short ones are stuck into the ground. Between them is stretched a roof of light fabric. In order for the structure to be stable, it must be additionally reinforced with rope braces.

Note! The higher the canopy, the less stable it will be, and be sure to use only the lightest fabrics. The heavy fabric will cause the pipe to bend and the structure will break.

What will you need?

Manufacture various crafts Making plastic pipes with your own hands is also nice because you don’t need any special tools for this work. It is enough to take:

• roulette;
• a hacksaw or grinder;
• file;
• gas burner.

A knife, grinder and hacksaw are needed for cutting plastic pipes. A file will be useful for smoothing the oblique edges of cuts. A tape measure will be needed for measurements, but a gas burner is needed to heat the plastic at the joints for a more reliable connection of the elements. That's all about tools, now let's talk about materials.

We take as materials a large number of plastic pipes different diameters, lintels for them and woven fabric for the roof. You can read more about it in the article of the same name.

How to make it yourself?

Making such a canopy with your own hands will not be difficult. a lot of work especially if we're talking about O simple designs. First of all, you need to make a sketch of the future canopy and paint each detail according to size. Without a drawing made according to all the rules, in in this case It's quite possible to get by.

Having drawn a sketch of the future canopy with your own hands, calculate how much material you will need. Don't forget about the lintels and roofing material. After that, gather your tools and start working.

1. According to the sketch, cut the pipes for the racks and roof frame.
2. Bend plastic pipes with your own hands to create arched and other roof frame elements.
3. Now connect the roof frame elements. Before connecting pipes using jumpers, heat their ends with a gas burner, but not too much, so that the plastic does not leak or catch fire. Our task is only to soften it a little.
4. Let's dig the supports into the ground.
5. Let's connect the supports to the roof frame using the above method.
6. We stretch the roof over the frame and tie the canvas to it with special ropes so that it does not blow away in the wind. The work is done.

In conclusion, we note that making a canopy with your own hands from available materials is not so difficult, the main thing is to use imagination and ingenuity. At the same time, you will be able to amuse your pride and save a lot of money. Take, for example, canopies made of plastic pipes. They look decent and are simple to make; in addition, contrary to popular belief, such canopies are also quite strong.

If you are not willing to pay serious money for wrought iron or profile pipe, then classic plastic pipes can be an alternative. Thanks to fittings, you can achieve reliable connections, and by applying some tricks to the foundation, you can fix plastic gazebo no worse than a classical building.

PVC pipes are a cheap and lightweight material that has both its disadvantages and advantages over other building materials.

If all installation requirements are met, you can build a very good frame, and you can choose the cladding according to your wishes.

In this publication we will look at the variety of plastic pipes, as well as options for gazebos made of this material. Then the process of constructing a polypropylene gazebo will be shown, where the main emphasis will be on the connections between its parts.

Polypropylene (PVC)

Initially, plastic pipes were conceived as part of the water supply and heating system. Installation takes place using special soldering iron(we affectionately call it “iron”) and couplings.

Polypropylene has amazing characteristics that are also suitable for our country house construction:

• Strength.
• Flexibility.
• Low weight.
• Does not require additional processing.
• Low price.

Metal-plastic

Compared to polypropylene, metal-plastic is more expensive and reliable in terms of pipelines. Thanks to the aluminum foil inside, there is no expansion of the material when high temperatures, which has a positive effect on service life.

Metal-plastic construction (difference from classic polypropylene in the aluminum layer)

Since we don’t care whether it expands there or not, we look at the methods of its installation and technical characteristics. The connections are noticeably different from polypropylene, as a press and crimp fitting is used.

For the crimp option we need additional tool, and in the case of a press one, two adjustable wrenches will be enough.

Variety of gazebos made of plastic pipes

With fixed pillars

If you take fairly thick pipes and fix them in the foundation, you can make some kind of canopy and tent. It is best to sheathe the roof with the lightest possible material, for example, fabric or polyester, so that the frame does not deform during gusts of wind.

With arches

Thanks to its flexible shape, plastic can be used to make a decent arched gazebo covered with polycarbonate sheets. This structure is perfect for the garden to take a break between chores.

Portable

The lightness of the material allows you to make very light gazebo, the weight of which even one person can handle (in the absence of a heavy roof or cladding). If you do not fix the gazebo into the ground with the help of a foundation, then it can be moved from place to place, depending on the need.

Installation of polypropylene connections through couplings

For work we will need the following tools and building materials:

• Polypropylene pipes.
• Couplings (straight, angle and tees).
• Special scissors.
• Special soldering iron.

Installation instructions are shown in the picture below. The entire frame of the plastic gazebo is assembled using this principle.

Installation of metal-plastic connections through fittings

Working with metal-plastic will require an additional tool - press pliers. The price for each connection will be significantly higher than simple polypropylene couplings. Therefore, if you are planning to build such a gazebo, try to make as few connections as possible in order to save on this point.

Installation of pillars

To make the frame stable, it is necessary to fix the vertical posts (racks) as tightly as possible. To do this, you can use metal pins or full-fledged concrete foundation pillars (dig a hole and fill it with mortar).

In any case, this point needs to be thought through in advance. If metal can be laid freely on the tile and it will not go anywhere due to its mass, then plastic may well “escape” from a gust of wind.

Erection of the roof

It is not possible to make a rafter system similar to a wooden or metal roof. It is necessary to use a truncated cone shape with several rafter legs, which will create a strong frame for further cladding. An example of this roof is shown in the photo below.

Polycarbonate sheathing

The pipe structure is strong, but extremely unstable. To securely fix the entire structure, it is necessary to sheathe the frame with something. Polycarbonate will come to our aid; its weight and strength are ideal for installation.

Protecting the gazebo from the sun and wind

An interesting version of a summer gazebo is presented in the form of a tent. An ordinary frame is made from sixteen pipes (six for pillars, four for top harness and six on the rafters), and hung on top of it lightweight fabric or polyester, which perform decorative and protective functions.

In my opinion, this project deserves attention, since its cost is cheap, and it looks very civilized.

Video instructions for making a canopy from pipes

To tell the truth, it was not possible to find more or less adequate instructions for building such a gazebo, but even Channel One talked about creating a canopy.

The presenter will tell you in detail and show what plastic pipes the structure is made of, as well as how it is held together.

Before making a canopy from PVC pipes, you need to decide on its purpose.. Depending on the specific application of such a structure, its shape and dimensions are determined.

Today country canopy PVC pipe can have the following functions:

• Use as a gazebo.
• Protect your car from sun and rain.
• Used to protect tools and firewood.
• Create shade on the playground.

Advice! Some people White color pipes seems impractical and unattractive. Regular spray paint designed for plastic surfaces. To simulate steel pipes you can use silver paint to create the illusion of a bamboo gazebo beige color, and you can turn PVC into “wood” using a well-chosen brown shade. For children's playgrounds, you can even make the gazebo multi-colored.

Depending on the tasks at hand, the design of a canopy can be either very simple or require significant construction skills when creating.

What to consider when creating a canopy

In addition to its purpose, before directly constructing a canopy made of plastic pipes, the following nuances should be taken into account:

1. Will the structure be permanent or temporary. The presence of a foundation and the strength of the canopy itself depend on this. For example, carports for protecting cars in private homes are used all year round. If we are talking about a dacha, then a collapsible building is also possible.

Important! If it was decided to make the structure collapsible, then the process of assembling and disassembling it should not take much effort and time. Monolithic canopies need sufficient strengthening so that wind and snow cannot damage them.

1. Location. Depending on the area and terrain, the size and shape of the structure may depend.
2. Which pipes should I use? The roofing material creates a load on the supports; accordingly, it is necessary to select pipes of sufficient thickness. The most lightweight material is a moisture-resistant fabric from which you can sew a cover of any shape and size. In this case, you can choose ordinary thin pipes.

Advice! In addition to the roof load, the structure will be exposed to winds. At strong wind the effect of a sail can be created, so the canopy must be strong enough and well secured.

1. Choice roofing material. This parameter directly depends on the purpose of the structure. For temporary buildings, it is necessary to choose lightweight materials that can be easily dismantled and reused. If we are talking about a stationary building, then, on the contrary, the roof must be strong and reliable. For this reason, simple shower curtains can be used as a roof for a lightweight canopy. For car gazebo best choice will become cellular polycarbonate.

Important! For stationary gazebos, cellular polycarbonate is not used as a roofing material. The fact is that this material retains heat and transmits light well, and therefore it will be uncomfortable to be in such a gazebo.

1. The place where the canopy will be built from plastic pipes with your own hands. It must be carefully prepared for work. First, the base must be cleared of debris, then leveled and the soil compacted. In the places where the supports are installed, the ground needs to be softened.

Important! When installing supports for a canopy, you should make sure that there are no water pipes or electrical cables running underground.

What tools and materials are needed for the job?

How to build a country canopy from PVC pipes with your own hands? To do this, you need to stock up on certain tools and materials, such as:

• PVC pipes of the required thickness.
• Metal pipe for forming bases for supports 1 meter long. Its diameter must be selected so that the PVC pipes fit tightly into it.
• Thick water-repellent fabric. You can use a shower curtain, but in this case you won’t have to count on durability.
• Bulgarian.
• Sewing machine and thick thread (preferably shoe thread).

Execution of work

After the construction site has been properly prepared, you can proceed directly to arranging a canopy made of PVC pipes with your own hands. The instructions for performing the work include the following steps:

1. Mark the prepared area, identifying four places for supports. The shape and size of such a gazebo depend on its purpose.
2. Sawing metal pipe into 4 equal parts (25 cm each).

1. Drive steel rods into the marking areas so that about 2 cm of the pipe remains above the ground. This is how holes are formed for installing plastic pipes.

1. Now the pipes are cut in accordance with the selected frame design. You can make the roof either rounded or pitched (PVC pipes bend well).
2. After the frame is ready, cover it with fabric and determine the required shape and size of the roof.

1. Cutting out the canvas required sizes and hem it around the edges. Also at the edges there should be loops into which the pipes will be inserted.

Advice! Such loops should be located at a distance of no more than 15 cm from each other.

1. The frame is assembled, pulling the awning, and installed in the holes.

This is the simplest country canopy, which at the same time is very reliable design, firmly fixed (thanks to an improvised columnar foundation).

Conclusion

Making a simple canopy from plastic pipes is not difficult. You don't need to have any special skills or special tools to do this. Considering the tips described, any House master will be able to independently erect a similar structure on his site.