Is it possible to put laminate on the wall? How to attach laminate flooring to a wall: a few simple ways

As you know, laminate is a floor covering. But what kind of ideas do designers come up with to create unique interior premises. One of these original solutions began the use of laminate for wall decoration.

This innovation is becoming increasingly popular, which is why many home craftsmen began to think about how to attach laminate flooring to the wall.

This article will tell you how to attach laminate flooring to walls.

Why are walls covered with laminate?

It's no secret that PVC and MDF panels are most often used for simple and quick finishing walls

If we consider laminate from this point of view, it has some advantages over them:

1. Its strength is much higher. PVC panels can break upon impact, but laminate intended for flooring can withstand great forces and loads.
2. Its hygroscopicity is much less than that of MDF panels and washing the laminate is not difficult.
3. Easy to care for.

Against the background of these advantages, there is only one drawback - the cost, which is almost 2 times higher than that of panels.

Problems when laying laminate flooring on walls

Before you start attaching laminate flooring to the wall, you should familiarize yourself with some of the nuances of this process.

In order to avoid problems that sometimes arise during installation, you need to know what they may be:

1. Laminate flooring is quite heavy. That is why the surface on which it will be attached and the fastening elements must be durable.
2. Despite the fact that the hygroscopicity of laminate is much lower compared to panels, it has the ability to swell with changes in humidity in the room.
3. The lower part of the protruding groove is used to fasten the panels to each other, which ensures quick and easy connection. With laminate the situation is somewhat more complicated. As a rule, laminated boards are equipped with click locks.

On the one hand, such a fastening provides good joint rigidity, but on the other? the head of a nail or screw that gets into such a lock will prevent it from closing tightly, which will lead to gaps.

Based on the above, we draw the following conclusions:

1. Laminate flooring should only be mounted on a flat and durable surface. Sheets of drywall placed on plaster can fall off along with the laminate boards attached to them, under their weight.
2. Rigid fixation of laminate panels should not be allowed. In the case of adhesive seams, they must be elastic.
3. When fastening boards, you should pay attention to ensure that fasteners do not fall on their locks.

Helpful advice! In rooms with high humidity, such as bathrooms and kitchens, it is not recommended to use laminate as wall finishing.

This finish is only suitable for rooms with a constant and moderate level of humidity (bedrooms, living rooms, hallways).

Laminate installation

You can attach laminate boards to walls with your own hands different ways. The technology of this process depends on the characteristics of the surface on which they are installed.

Installation on a flat, stable surface

The easiest way— fastening the laminate to a plastered surface or covered with sheets of plasterboard. This surface is quite flat, so the laminate is attached to it with liquid nails. This adhesive joint, even after hardening, has good elasticity and is also quite strong.

The following instructions will help you with your work:

• At the bottom we install a stop for the first row of laminated boards to avoid them sliding under the weight of their own weight.
• Apply glue in a zigzag pattern to the first board, press it tightly to the wall surface and immediately check the horizontal level with a level.

• Apply glue to the next board. When fastening in this way, you should not knock the boards through the boss. It is recommended to insert them into the lock with a slight bend, then snap and press. The bottom board should be held in place.
• We lay the boards so that the transverse joints in adjacent rows do not coincide.

Helpful advice! If you need to cover it with laminate small area, then you can assemble a shield from it on the floor and glue it to the wall in this form.

Installation on an uneven wall

To attach the laminate to a wall that has uneven surfaces, lathing is used.

1. The sheathing frame can be mounted from wooden slats with a cross-section of 40x40 mm or from metal profiles. The pitch of the guides should be no more than 60 mm.
2. We lay the first board so that it rests on the rail (profile). This will ensure the stability of the entire structure, and it will not move down during installation.
3. Subsequent installation is carried out in the same way as in the case of a flat surface. Don't forget to bandage the transverse joints. A plinth for laminate flooring can also be useful in your work.

Fastening with clamps

Laminate flooring can be mounted on walls not only adhesives. There is a very simple and proven method - fastening with clamps.

These are galvanized brackets specifically designed for fastening lining and laminate to walls or ceilings.

For such fastening, two types of clamps are used:

1. Serrated Staples. They are driven into the board and fixed with self-tapping screws on the sheathing or wall;
2. Flat Led Staples. They are used to press down the protruding part of the click lock.

Self-tapping screws are used to attach clamps to a wall or board.

Conclusion

Laminate - reliable and durable finishing material, giving any interior a beautiful and modern look. It is not for nothing that they began to use it for finishing many surfaces.

We examined all the intricacies of laying laminate on walls, fully covering the specifics of such work. These recommendations will help you avoid the main problems encountered during installation and carry it out efficiently with your own hands without much difficulty.

Additional information and step by step process You can find laminate installation in this video.

Contrary to popular belief, the wall is not difficult at all. Even a beginner can do such work without having any special skills or abilities. And although this is quite paradoxical, the technique when designers use materials for purposes other than their intended purpose is quite popular today and is successfully used in the interior.

Laminate on the wall - new and original

walls and will increase the space of the room several times. In addition, this finishing method has many other advantages. There are several ways to install this material on vertical surfaces.

Advantages of using laminate for walls

Sten began to be used for many reasons, which are usually called prerequisites:

1. Structure of this material allows you not only to lay it, but also with the help of certain fasteners you can attach the panels to any surface, including the ceiling and walls.
2. Increased wear resistance. Thanks to a special manufacturing technology, laminate can be used under different loads depending on its class. And since when using laminate on walls, there is practically no load on it, the service life of the material immediately increases by 3 times.
3. Laminate on the wall is comparatively cheap way decorate the room. You can use even the lowest class of laminate with minimal wear resistance and low cost. Such walls will last much longer.
4. Laminate is antistatic if covered with film. Therefore, you don’t have to worry that dirt will accumulate on the walls, and it’s very easy to sweep away ordinary dust during the cleaning process.
5. A wide selection of colors and textures only popularizes the use of such material on walls.

Laminate was originally created as a floor covering, but thanks to these features it began to be used in wall decoration:

• It is durable, so it can withstand even a lot of applied force without problems.
• It can be washed with special detergents, so it is very easy to care for.
• On the wall in the interior it looks very stylish and elegant, so thanks to its use you can realize even the most daring design solutions.

What rules should you follow?

To prevent the panel finishing from becoming unusable ahead of schedule, it is recommended to adhere to special rules:

1. It is advisable to attach laminate sheets exclusively to a flat surface, otherwise it may fall, thereby tearing the plaster from the wall.
2. It is not recommended to use laminate in rooms with high humidity (in the toilet or bathroom). For finishing it is better to use other materials.
3. It is not recommended to fix the panels too rigidly; it would be better to be a little elastic. This way the panels can move slightly if they are linear dimensions will be changed.

Attaching the laminate to the wall can be done in several ways: using glue and attaching the laminate to the frame.

Using glue at work

Such fastening is considered quite reliable, but the plates will adhere well to the glue only if there is no high humidity in the room and a special adhesive composition is used for the work.

You can use universal adhesives or purchase special glue that is suitable for installing panels. Before starting work, the wall surface must be leveled to perfect condition.

If there are large irregularities, you will need to seal them with putty before finishing. Deviations of the wall plane must be within 3 millimeters, otherwise it will not be possible to attach the laminate panels perfectly. Then the wall is degreased and impregnated with a special primer; laying the laminate can begin only after the surface has been completely dried.

How to fix laminate flooring on the wall? start from the left bottom corner. The laminate panel is applied and glued to the wall, then the panel is torn off and dried for 10 minutes.

After this, the torn panel is returned to its place. This procedure is not at all necessary to perform, but it makes it possible to increase the setting liquid nails with a wall. Horizontal installation should be carried out gradually, it is impossible to attach too many panels at a time.

If the wall is finished vertically, then the laminate can be laid right up to the ceiling. After each new row, you need to tap the previous one to avoid its displacement and peeling from the wall during the work process. It is imperative to leave small (about 10 mm) deformation gaps under the ceiling and below.

Frame installation

You can attach the laminate to the wall using a more labor-intensive and in a complicated way, but at the same time all the work can be done with your own hands. Before starting work, you will definitely need to mount a special frame, taking into account the method of attaching the laminate (vertical or horizontal).

For vertical installation you need to assemble the frame vertically, for a horizontal one - horizontally, respectively. The bars must be installed perfectly evenly, especially for the outermost load-bearing ones. It will depend on them appearance the resulting design.

Now you need to pull the threads between the bars and install the intermediate ones. Thus, laminate is to metal, and to wood. This will allow you to avoid loosening in the future, and the laminate will not deteriorate and will not lose its appearance.

You can attach the laminate to the wall after the frame has been completely prepared and all communications in the room have been laid. If necessary, the space is additionally insulated or filled with soundproofing material (mineral wool is excellent for this purpose).

Now you can attach the laminate panels to the resulting structure. In the chosen method, they can only be fixed using clamps. These are staples that will not interfere with the panels connecting well and securely holding the finishing material on the frame.

How to attach laminate flooring to a wall? The clamp will need to be inserted into the grooves of the laminate panels, then nailed to the block using a stapler. Such a mount is considered not only very reliable, but will always remain slightly movable. Thus, with some changes in temperature or humidity, the laminate will be able to react calmly, and the wall surface will not deform.

The choice of fastening method depends only on the taste preferences of the owners, their ability to pay for the work of a specialist or the desire to do everything efficiently and reliably with their own hands. Wall decoration with laminate is becoming more and more popular, because in this way you can original decor walls and preserve the interior of the home for a long time without carrying out repairs.

Finishing walls with laminate does not require professional skills or much physical effort. In general, this material was developed as a universal floor covering, but it soon became clear that it could be used for other surfaces. Firstly, his decorative look great for creating various types interior Secondly, at its price it is much cheaper than many other finishing products.

Laminate has several significant advantages that set it apart from other materials. Some of them:

• The coating has good wear-resistant qualities. They were laid out based on its intended purpose. It is not exposed to most pollutants. Easy to clean.
• Decorative look - allows you to create individuality. The variety of colors and textures make it truly universal.
• The cost is significantly lower than other types of finishes, while its durability is much higher.
• It tolerates high and low temperatures, but not their sharp changes. Has significant fire resistance.
• Installing laminate flooring on a wall does not require much time. All work is completed very quickly.

Attention! Laminate has significant advantages. It can be used in any room. However, the use of this material is not recommended in rooms with high humidity.

Selection rules

Do not think that all laminate has the same properties. No, like other types of products, it has a number of varieties that define it performance.

1. A distinctive feature of this material is its abrasion resistance. It is determined by the class that was assigned to it.
2. For wall cladding you won’t need a high class (the highest is 34), but you don’t need to choose the lowest (it is 21). It is better to give preference to average values.
3. They immediately decide on texture and color. This is very important if work needs to be done over large areas. The fact is that different parties can have significant differences, different shades. Therefore, it is better to make the purchase simultaneously.
4. Having a certificate of conformity is a mandatory condition. Materials used for finishing premises must be environmentally friendly.

Wall mounting

Laying laminate on the wall is carried out in two ways:

1. By creating a sheathing (frame).
2. Using glue, the material can be glued to the surface.

Attention! To secure the laminate, use special glue or liquid nails. It should immediately be emphasized that this type of finishing requires no less preparation than the construction of a frame. Can only be pasted on a perfectly flat surface. If you ignore this point, then all the joints and distortions will be immediately visible.

You can also use sheets of plasterboard as the surface to be covered with laminate.

Method one - glue

So, it all starts with preparation:

• The wall is completely cleaned, all foreign elements are removed.
• It is immediately determined which type of preliminary finishing will be chosen. This could be puttying the surface or covering it with sheets of plasterboard. In any case, you need to get a perfectly flat surface.
• Counting in progress required quantity materials. A minimum reserve of 7-10% is taken into account.
• The tool is being prepared:
  electric jigsaw or hand saw;
  drill and screwdriver;
  trowel or glue gun;
  level;
  mallet;
  rags.
• Elements are removed door design– platbands. They will need to be installed after all the work. If the doors have not yet been installed, then there is no need to rush. You can install the box, but do not do the cladding (do not use additional trim) - until the laminate is laid.

Direct installation:

Thus, a fairly attractive surface is obtained, but only if the base has been properly prepared.

Advice! It is necessary to monitor the difference in height between the walls. This is especially true when it comes time for the top row. Correct measurements allow for precise cutting.

Method two - we make the sheathing

It is believed that this technology is the most reliable. It is better if a material is chosen that has a significant length of slats. This will cut the work in half. In addition, laying laminate flooring on a frame does not require leveling the walls, which saves budget. But there is one drawback - the sheathing “eats up” some area.

It all starts with the construction of the frame:

• For work, timber 40*40 or larger is used.
• Calculate the quantity vertical racks. This is quite simple - they proceed from the length of the selected laminate, taking into account that it must be attached in three places.
• All slats are drilled out immediately (step 250-300 mm). For speed of work, it is better to take one stencil of holes as a basis.
• One centimeter is measured from the floor and ceiling. At this height all vertical posts will be secured.
• The required spaces are marked along the wall. But they should not be more than 40 - 50 cm.
• Using one strip, which has been pre-drilled, mark the mounting points (along the entire wall).
• The dowels are driven in.
• The first rack is installed. She is immediately baited. The main thing is to do the alignment correctly. To do this, use a level, and place a backing under the rail itself. Next, the procedure is repeated.
• Thus, a frame appears that covers the entire surface.

1. The first row is fastened according to this principle: the first plank is screwed to the rack, this is done at the very bottom, where the baseboard will be located. Use screws that have a countersunk head.
2. For further fastening, it is better to use clamps. The joining of elements occurs from the selected lock.
3. And again remember that the laminate is laid in a checkerboard pattern.

It is better to clean the place of the lock where the clamp will be attached first. That is, drown it a little. Then the connection will not be difficult.

In principle, the lathing can be made not only for the horizontal arrangement of elements. If you increase the number of racks, you can create a diagonal pattern. But such work will require more strength and concentration.

On a note! Can be used metallic profile, which is used for fastening sheets of drywall. Then you will need to select the appropriate fittings. And also we must not forget that the space that remains between the wall and the material can and should be used for additional insulation and waterproofing.

As a result

How to put laminate on a wall? Very simple. You need to follow a fairly simple technology and take into account the characteristics of a particular room. And also forget forever that this material is made primarily for flooring.

Experienced owners who are thinking about decorative finishing walls, they know that to give the room respectability and emphasized splendor, it is most profitable to use wood and MDF, however, the use of these materials is often limited by their significant cost. Century innovative technologies made it possible to find a cheaper alternative to wood and MDF panels, making repairs accessible to everyone. And this alternative is laminate.

Laminate for wall finishing: main advantages

There is no point in questioning the practicality of laminate as a material for wall decoration, since it long time tested for strength as a floor covering.

Previously used as a cheaper alternative to conventional wood and wall panels, today laminate is gradually displacing its competitors due to its undeniable advantages.

The main advantages of laminate as a material for wall decoration:

• High environmental friendliness due to the wood component included in the laminated panels;
• Durability is an important advantage of laminate, relevant in conditions of compliance with operating rules;
• Wide selection of textures and color solutions- the advantage of laminated panels, giving life to the most daring ideas of designers;
• Ease of installation allows you to finish walls without the help of specialists;
• Ease of operation and high practicality allow you to easily carry out wet cleaning of the room without fear of damaging the laminated panels.

Disadvantages of laminate that limit its use

Despite a large number of advantages, laminated panels also have disadvantages that prevent their use as a finishing material in any premises.

This is mainly due to the low resistance of the material to changes in temperature and humidity, which preclude its use in the bathroom and kitchen.

There are no restrictions for finishing a hallway using laminate, since possible changes in the indicated microclimatic factors in this room are short-term.

The main parameters that you need to focus on when choosing a laminate

Before moving on to covering walls with laminate, it is important to choose the right material, focusing not only on its cheapness, but also on the operational factors affecting it.

In this regard, when choosing a material you need to focus on the following parameters:

• Possible level of abrasive and mechanical impact. This factor is important to consider when choosing the thickness of the material. Frequent cleaning and constant exposure to sharp claws of animals is a reason to abandon excessively thin panels;
• The installation method is perhaps the most important factor determining the choice of material. The opposite statement is also relevant - the type of laminate determines the method of attaching the material to the wall.

Main types of laminate

Taking this into account, the following types of laminate are distinguished, which you need to familiarize yourself with before answering the question: “How to fix laminate on the wall?”

• Adhesive laminate is characterized by smooth edges and the absence of locks. Fastening of such panels is carried out using liquid nails;
• Tongue-and-groove laminate is distinguished by the presence of a tongue-and-groove lock. Laying laminate flooring on a wall involves using glue, without gluing the locks. In the case of fastening the material using a dry method, strips like lining are secured with small nails into the groove of the tongue;
• Click laminate is a more modern modification of tongue and groove panels. It can be attached using glue to a wooden sheathing.

Methods for installing laminated panels

Thus, there are fundamentally different options for installing laminate on the wall:

• The first method: directly attaching the laminate to the wall using liquid nails or glue, which allows you to easily combine texture and color design panels. However, the walls in this case require additional preparation, as they must have a perfectly flat surface;
• The second method involves laying the laminate on a wooden sheathing, which is pre-assembled from slats and attached to the wall. Despite the obvious advantages, namely the possibility of additional sound insulation, owners often refuse this mounting option, since the size of the room is in this case will decrease.

Installing laminate on the wall: sequence of work

First stage finishing works consists in calculating the required amount of material. Considering that the laminate is attached to a flat surface, the calculation will not be difficult. To do this, the width of the wall is multiplied by its height and another 10% is added to the resulting number, which is necessary to adjust the material. To rationalize the use of laminated panels, experts advise choosing planks that are most suitable in size.

Before answering the question: “How to attach laminate flooring to the wall?” It is necessary to clarify that preparation of the working surface is considered a mandatory stage of finishing activities.

In the case of using an adhesive laminate, no specialized measures are required; it is enough that the wall surface is smooth and dry. For a laminate, the features of which imply its fastening to a frame base, it is necessary to prepare a wooden sheathing.

To make it, it is recommended to use wooden slats with an average diameter of 30 mm, which are fastened with self-tapping screws at a distance of up to 40 mm. The installation of the slats is carried out strictly perpendicular to the future panels. It is advisable to use a building level.

Next, they decide on the choice of starting point. First of all, it depends on the spatial orientation of the panels, which can be located both vertically and horizontally. Horizontal laying, in turn, is directly dependent on the option of wall cladding, which is also different and can be either full or partial.

If you plan to completely cover the wall or only its upper part, fastening the panels starts from the ceiling and is carried out from top to bottom. Otherwise, the wall is finished in the opposite direction, starting from the floor.

In the case of vertical orientation of the panels, the finishing and design of the walls with laminate starts from the corner of the wall in the direction from left to right. So that the finishing of the corners does not spoil appearance rooms, experts recommend leaving deformation gaps of 15-20 mm from the corner of the wall.

The method of attaching the laminate also depends on its type: when attaching the adhesive laminate, the back surface of the panels and the walls are coated with glue, after which the planks are fixed to the wall using a level.

The second row is fastened in the same way, but before fixing the bar with glue, it is inserted into the lock of the previous panel. To achieve additional fixation, the lock is secured with nails or staples. In the case of wall finishing using tongue-and-groove laminate, its fastening to the sheathing is carried out using clamps that fix the panel at the top and bottom.

After strengthening the laminate on the wall, a photo of the room after finishing can be seen below; it is not recommended to leave sections of the wall in contact with the plane of the floor and ceiling in their original form.

This question will undoubtedly arise from a person who learned about this finishing option for the first time. Laminate has long established itself as an excellent decorative finishing material for floors, durable and practical to use.

Laminate can be used to finish floors and walls in almost any room in an apartment or private house.

Laminated panels are increasingly being used for wall decoration, thereby displacing traditional finishing materials such as or conventional wall panels.

Advantages of using laminate for wall decoration

1. European, like domestic producers put on the market ecologically pure a product that meets all modern safety requirements, so covering the walls with laminate is quite possible.
2. If you decide to use laminate for walls, then be sure that this material durable, and if operating rules are followed, it will last for decades.
3. Using laminated panels of low class 21-31, you can save a lot. After all, such panels are inexpensive, but are designed for use as flooring, and they won’t be demolished on the wall.
4. Variety of textures and color solutions of this material provide a wide field of activity for designers when decorating premises.
5. Carrying out work on installing laminate flooring on the wall with your own hands — simple task, if you carefully read all the tips indicated in the article and follow them. Even a beginner can carry out repair work on his own.

Disadvantages of laminate when finishing walls

1. First drawback laminate as a finishing material for walls is its sensitivity to moisture, which can cause swelling of the material and lead to cracking of the outer decorative surface laminated panels.
2. Another drawback is sensitivity to temperature fluctuations, especially to high temperatures, which can spoil the attractive appearance of laminated panels.

Therefore, you should not install laminate on the wall of the kitchen or bathroom, since in these rooms high humidity and frequent temperature changes. Laminate on the wall of a balcony, basement or loggia is also not the best solution.

The microclimate of these premises will be harmful to laminated panels and will destroy even the most high-quality and durable laminate. For finishing these premises it is better to use traditional materials, or MDF panels.

Lock system

Adhesive laminate. This system does not have locks for fastening the panels to each other, so fixation occurs using glue. How to glue laminate to a wall you ask? Apply to the end and back of the laminated board construction adhesive, for example, on a silicone basis or the so-called “” and is pressed against the wall.

Next, the next panel is laid and all the others are laid in the same order. Any glue that bleeds through the joints should be immediately removed with a cloth soaked in a solution of water and vinegar. The adhesive laminate has a small contact area with the surface on which it is laid, so it is rarely used when laying on lathing.

This type of laminated covering has a fastening in the form tongue and groove lock, which does not need to be glued with glue, which allows you to get neat and dry joints.

When installing this type of covering, the panel strips are secured in the groove of the tongue using small nails or clamps. It should be noted that the fastening takes place on a wooden or special metal sheathing. Sheet pile option will do for cladding walls, floors and ceilings.

This option has an improved tongue and groove system, which is a convenient lock for connecting panels together. When laying laminated boards with click lock, the material is tilted perpendicular to the other panel by 20 degrees, then the panel is inserted into the grooves of the lock and easily snaps into place.

Clicky decorative laminate can be attached to the wall to a wooden frame using glue. This laminate has increased strength and resistance to deformation.

Price and strength class

To install laminate flooring on a wall, first of all, follow the color and texture that will be used in the interior of the room. In most cases, one of the most important factors is price finishing material. True, you should not always save on this, since the quality of laminated panels directly depends on their price.

When covering walls with laminate, you can use material of low 21-31 grades, and not 33-34 (high strength), which are used where required high stability to abrasion of the coating. After all, laminate walls in the interior will not be subject to high loads, since they will mainly only perform decorative function.

Therefore, by choosing an inexpensive finishing material for walls made from laminated boards, you can significantly reduce your renovation budget and at the same time get Beautiful design premises.

You can buy laminate for walls inexpensively, but you should still take into account factors that may affect the performance of the facing material, for example, animals or children.

Let's summarize the criteria for choosing laminate for walls:

• Consider the intensity loads, which will be carried out during operation on the laminated coating, is therefore very important. If you have a pet that can damage the surface of a laminate wall with its claws, then you should not choose inexpensive option, having low resistance to physical influences.
• Another important parameter is appearance, that is, the design with laminate on the wall should first of all please the eyes and bring Aesthetic pleasure to the owner. The modern construction market is replete with laminated finishing materials of various colors and textures. Choose from a variety of options that simulate different breeds wood or even stone can be done without any problems.
• The following parameter applies to installation method laminate on the wall. One of which is to attach laminated panels to a frame made of wooden or metal slats. You can also glue laminated boards directly to the wall. But at the same time, the surface should be as smooth as possible.

How to lay laminate flooring on a wall with your own hands?

Methods for laying laminate flooring: glue or lathing?

In case of glue method fastening the laminate to the wall, you should carry out thorough preparation surfaces, since unevenness will have unpleasant consequences during operation. Firstly, it is not an aesthetically pleasing appearance of the wall, when the gaps of some laminated panels will protrude due to unevenness. Secondly, the cost of preparing the walls can cost a hefty sum, which is not very good for thrifty people who are used to counting their money.

The glue method is quite simple to implement and does not require special knowledge, which will allow you to implement it. How to glue it to the wall, and what nuances may arise during the work we will discuss further? You can glue any type of laminated boards, and panels with a lock and without a lock at all.

Creating a sheathing for laying laminated panels it will be more profitable in the sense that you do not need to level the wall, that is, plastering or installing drywall to create a flat surface is not required. The lathing will allow you to insulate the wall with appropriate materials and provide additional sound insulation. Some manufacturers, aware of the growing popularity of wall decoration with laminated panels, offer special fastening systems for quickly creating convenient sheathing.

What tools are needed to install laminate flooring on the wall yourself?

• In addition to and for the bevel, you will need these simple tools, like a square, ruler, tape measure, pencil.
• You will also need hacksaw for wood, metal, or better yet, an electric jigsaw, which will significantly speed up and make the work easier.
• Requires special wooden block(boss) for padding laminated boards and spacer wedges, designed to install gaps between the laminate and the ceiling-floor of the room.

For a visual overview of the installation process laminate on the wall, video (at the end of the article) with the stages of work will help to better understand the entire progress of the repair. For a person who has decided to cladding with laminated panels on his own, viewing the educational information is simply necessary, as it will prevent many mistakes and incorrect actions.

We install laminate flooring on the wall with our own hands

Stages of work:

1. We calculate the amount of laminate. Everything here is quite simple, because the amount of material required is calculated using a simple formula - the height is multiplied by the width and you get total area In this case, you should add about 10% additionally for fitting and cutting the material.
2. We prepare the wall surface for laying the laminate. With the glue method you will need dry, clean and flat wall, so you will need to clean it well.
   When creating a frame for laminate you will need to create a sheathing made of wood or metal. For creating wooden frame you need slats 20-40 mm wide, which are attached to the wall at a distance of 30-40 cm from each other. The slats are installed perpendicular to the direction of the laminated board panels. Metal carcass made from slats designed to create plasterboard floors. Or you can use special systems that manufacturers offer for attaching laminate to the wall.
3. Select a starting point. When covering the entire surface or only the upper part of the wall, you should begin installing the laminate on the wall from above. You will need to mark a distance of one board from the ceiling and begin cladding from this boundary. It does not matter what position of the panels will be used - horizontal, vertical or diagonal. If you only need to sheathe bottom part walls, you should accordingly start from the floor and perform the same actions.
4. We install laminate on the wall. When gluing laminate to a wall, the material is treated with an adhesive. These can be silicone-based “liquid nails”, as well as special glue for laminated panels. Next, the board is pressed against the wall and fixed. This is repeated with all panels. In this case, you can coat the fastening lock of the laminate boards with glue for better strength.
   When creating the sheathing, the panels are fastened using special brackets (clasps) or nails. This method of fastening is also used when working with lining or MDF panels. The clamps can prevent the laminate lock grooves from moving into place. Simply trim the mounting points so that the grooves fit into place.
5. We install skirting boards. Corner places, as well as joints between the floor or wall after installing the laminate on the wall, require fastening and corners. This will create a finished look for the interior. The many options for different corners and baseboards currently available in construction supermarkets will allow you to choose what you need.