Is it possible to wash an acrylic bathtub with lemon? How to clean an acrylic bathtub

home

Programs

Is it possible to wash an acrylic bathtub with lemon? How to clean an acrylic bathtub - tips and tricks

Acrylic bathtubs are in great demand due to their hygiene and lack of corrosion on their surface. But acrylic has its drawbacks, primarily the requirement for careful care. How to clean an acrylic bathtub at home worries many housewives. Caring for it can be called a whole science. If you care for your bathroom correctly, it will delight you with its snow-white color for a long time.

Cleaning products for acrylic bathtubs

Detergents Not suitable for cast iron. You should not choose a cleaning product for acrylic bathtubs that contains:

acetone;
chlorine;
ammonia;
formic acid or any other.

Acrylic tanks cannot be washed with boiling water or detergents. ammonia, formaldehyde and other corrosive elements. This will damage the surface, and restoring it is quite expensive. You need to choose high-quality products that will be completely safe for the surface, while cleaning it quickly and easily.

Let's consider which reliable detergent you can choose and why:

Now you know how you can clean an acrylic surface, but how to clean an acrylic bathtub at home is also worth finding out.

Using detergents

They must be used strictly following the instructions. With abrasives, everything is simple - apply and wash until the bathtub finally shines. But gentle gels are usually used as follows::

apply the gel to the entire surface with a sponge or use a spray bottle;
time for ten minutes - usually this is enough to have an impact, but look at the instructions first;
wash off the dirt along with the gel with jets warm water and a sponge;
To be safe, rinse the bathtub again and wipe it dry.

Features of care

Such baths require careful treatment. For example, you should not wash them more than twice a week with acrylic bathtub cleaner. After each use, you need to rinse the walls with water and wipe with a sponge. Several times a week you need to wipe with soapy water and then wipe dry with a dry soft cloth.

Not even a drop of water should remain, then the washing tank will not become covered with a yellow coating. But this material is not subject to corrosion - this is a definite plus. If plaque does form, it should be washed off with other cleaning agents.

Folk remedies

They will cost you less, and besides, you will not doubt their composition. Therefore, many housewives resort to this type of care for their acrylic bathtub at home.

Cleaning the bathtub is very simple using regular wine vinegar, diluting it with water. The mixture is safe, but its effect is no worse than that of expensive drugs. But this composition only copes with soap stains; if the surface has already turned yellow, then try another option:

fill the bath warm water;
pour in one and a half liters of vinegar and leave overnight;
rinse with water, wash the surface with a sponge.

Often, rusty stains from flowing water remain on the side of the bathtub. Acrylic does not rust; the residue remains from the running faucet, so its condition must be monitored and changed in a timely manner. It's easier than getting rid of rust. But if it was not possible to prevent its occurrence in time, then you can also resort to traditional methods. For example, the following rust remover will help::

Dilute citric acid in a glass of water and pour into a filled container;
after ten minutes, drain the water;
Rinse the surface with a sponge and wipe.

City water contains rust and various salts, which is why the bathtub often turns yellow. Another effective method To combat yellowness, use table vinegar paired with oxalic acid. Warm the water slightly and add these two components to it. Wipe yellow stains with this mixture and wash them off after ten to twenty minutes.

Prevention and disinfection

If the acrylic is high quality, it can last thirty years while remaining looking like new. But this effect will only occur with careful use. It is not allowed in an acrylic container.:

If you follow a weekly washing schedule and avoid damage, she will be fine. Before installing a new bathtub, plumbers advise changing and water pipes to avoid the appearance of yellow is worn. And although the smooth surface is not susceptible to corrosion and attacks of fungal diseases, disinfection must be carried out once a year.

How is disinfection carried out?

For disinfection, you can use the Czech product Ravak Disinfectant, which is distinguished by its quality and safety. This way you will have no doubt that the container is disinfected and you can bathe in it yourself or bathe small children there. The product is very easy to use:

fill the reservoir with water;
dilute part of the product in ten parts of water and pour into the collected water;
leave for ten minutes, remembering to stir;
wash away clean water, helping yourself with a soft sponge.

The product is economical in consumption, because frequent disinfection of the acrylic surface is not required. But with its help you can treat the entire bathroom. The main rule is to dilute it generously with water!

Of course, you will have to use trial and error to find the only cleaning product that will completely suit you in terms of quality and safety, and will not repel you with an unpleasant pungent odor. But if it is not possible to buy expensive bottles of chemicals, you can always resort to traditional methods, which are also famous for their effectiveness.

Each product has its own advantages and disadvantages that are directly related to its composition. Optimal composition it is simply impossible to name. The main thing is not to forget to make sure that the composition does not contain acids, ammonia and chlorine, which are contraindicated for acrylic surfaces.

If you regularly keep your bathroom clean, then no plaque or rust will form there. After all, bathing in a snow-white container is much more pleasant than in a yellow and unkempt bath. Therefore, twice a week, always pay attention to the surface of the acrylic, rinsing it with jets of water and a sponge, and then wiping off any remaining droplets.

Attention, TODAY only!

For a long time now, heavy cast iron bathtubs have not been seen in bathrooms. Their place has been firmly taken by modern snow-white acrylic bathtubs. They come with hydromassage and lighting, with transparent inserts and soft headrests. But over time, limescale and soap deposits spoil the flawless surface. But there is simple remedies, which will allow you to clean acrylic at home.

Methods for cleaning acrylic bathtubs at home

Lightweight acrylic bathtubs are very durable, they do not rust and do not contribute to the growth of mold and mildew. But the disadvantage of the material can be considered instability to abrasion and scratches.

Acrylic bathtubs fit perfectly into any interior; the variety of shapes will allow you to choose the option that suits each project.

Household chemicals

The inner surface of the bathtub is very smooth: this way dirt eats into the material less. Not all products are suitable for cleaning.

For cleaning acrylic bathtub use microfiber cleaning cloths: they gently clean the surface and quickly absorb moisture

Here is a list of substances and devices that damage and corrode acrylic:

steel wool and brushes, sponges with hard coating;
cleaning powders and abrasives that create scratches and microcracks;
chlorine-containing compounds that lead to yellowing of the bathtub walls;
too much hot water;
acids, acetone and gasoline, ammonia, which cause darkening of the bowl.

In the store you can buy cleaning compositions suitable for acrylic surfaces. They will carefully and effectively clean the bathtub from salt and limescale deposits. These products come in the form of a thick gel or spray that dissolves dirt.

Some of the popular cleaning products:

Acrilan. Cleaning foam gently disinfects the surface of the bathtub and creates a protective film on it that prevents the settling and accumulation of limescale. Do not wait for the product to dry completely: the time it acts on the walls of the bath should not exceed 10 minutes. Rinse off the foam running water. Acrylan should not be mixed with other cleaning compounds.
Acrylan can also be used for cleaning showers, sinks, and swimming pools
Cif cream does not contain abrasives, which means it does not scratch the surface of the bathtub. The product easily dissolves dirt, is suitable for frequent cleaning, but has little effect on difficult stains.
Cif cream with whitening effect is perfect for cleaning bathroom fixtures and white surfaces
Mr. Chister. It acts gently and quickly, kills harmful bacteria and gives plumbing shine thanks to the acrylic polymer in its composition.
The composition of Mister Chister is safe for the human body, the fragrance does not irritate the nasal mucosa
Team Pro. Defeats old and complex stains, eliminates yellowness and unpleasant odors In bathroom.
Tim-Profi, like Akrilan, creates a protective shell on the surface of plumbing fixtures
Mister Muscle for the bathroom. It is available in the form of a spray and, when sprayed, dissolves particles of dirt and plaque. After application, wait 2-3 minutes and rinse with warm running water.
Mister Muscle is suitable for cleaning all bathroom fixtures

It is acceptable to use dishwashing gels and washing powders, diluted in a small amount of water. Domestos acrylic will not spoil if you spread it on the surface for no more than a minute and then rinse with a large stream of water.

A more budget alternative to Domestos is Sanox. It is available in the form of gel, foam and spray.

If the bathtub has not been cleaned for a long time and water stone and hard deposits have formed on it, then to remove them you can use a kitchen powder, for example, Pemolux:

Dilute it with water to a paste consistency.
Add a spoonful of vinegar and 2 tablespoons of bleach.
Apply to the surface and leave for 20 minutes.
Wipe the plumbing fixtures with a rag and rinse off any remaining product with running water.

Folk remedies

Thrifty housewives often use folk remedies that cost pennies and are on the shelf in kitchen cabinet in every house.

Baking soda

Regular baking soda perfectly removes all stains on acrylic. It's easy to use for cleaning:

Dilute with water to a paste consistency.
Apply the mixture to the stained areas.
After 15 minutes, wipe the surface with a microfiber cloth and rinse off any remaining product with running water.

Baking soda is often mixed with coarse salt when cleaning, but when cleaning acrylic bathtubs this is strictly prohibited to avoid scratches on the surface.

Lemon acid

Citric acid is often used to remove plaque:

Fill two-thirds of the bath with warm water.
Add one packet of citric acid.
After two hours, drain the water and rinse the bathtub with warm water.
Wipe the surface with a soft, dry sponge.

50 grams of citric acid will replace expensive cleaning products for plumbing

Acid can be replaced with lemon:

Cut the citrus in half.
Rub the walls of the plumbing fixtures with juice and pulp.
After half an hour, rinse with warm water.

Toothpaste

Successfully fights stains and yellowing on acrylic surfaces, non-abrasive toothpaste:

Apply the product to a soft sponge or cloth.
Rub the dirty areas of the bathtub.
Rinse off any remaining toothpaste with warm water.

The most suitable option for cleaning plumbing is a white bleaching paste without particles.

Ammonia and hydrogen peroxide

Ammonia in combination with hydrogen peroxide works great against yellow stains on plumbing fixtures:

Mix the products in equal proportions, add a little water.
Moisten a napkin or sponge with the resulting liquid.
Wipe dirty areas.
Rinse off with warm water.
Blot off any remaining product with a dry cloth.

Hydrogen peroxide can be used not only for treating wounds; together with ammonia, they give excellent results when cleaning acrylic plumbing fixtures

Vinegar

Finally, apple cider vinegar is suitable for cleaning acrylic bathtubs:

Dial full bath warm water.
Pour the bottle of 6% vinegar.
Wait 12 hours, then drain the water.
Rinse the surface with warm water and wipe with a napkin.

When working with vinegar or ammonia, do not forget to take precautions. Wear rubber gloves and thick long sleeves. If you have sensitive nasal mucosa, supplement your “protective suit” with a mask or respirator.

Can I use a steam cleaner?

A steam cleaner can remove the most stubborn dirt and yellow stains. Hot air disinfects the surface and gives it shine.

You can remove old stains with a steam cleaner

How to avoid plaque and stains

The quality and composition of water in many regions leave much to be desired. But there are still a few preventive measures, which will help extend the service life of plumbing fixtures and protect them from stains and unsightly plaque:

put an additional filter on the water pipe to reduce the content of impurities;
treating the bathtub with furniture polish, which forms a protective shell on the walls and prevents darkening;
Cleaning the surface after each use and thoroughly cleaning once every two weeks.

Acrylic is a durable, but rather capricious material that needs careful care

Subject to simple care instructions and careful use household chemicals acrylic plumbing will not cause any trouble and will look perfect. To keep your bathtub in excellent condition, you only need to dedicate just an hour a week to cleaning.

Bulky cast iron products have been replaced by elegant ones with varied functionality and beautiful appearance. They appeared in the retail chain not so long ago and many do not know how to properly care for them so as not to damage what seems fragile at first glance. How long it will retain its pristine beauty will depend on the care tactics used. Today the editors have prepared a website for their readers interesting review, in which he will tell you how to wash an acrylic bathtub at home, and also share several practical advice And useful recommendations, thanks to which you can subsequently easily deal with any contamination.

You need to be careful when choosing sponges for cleaning acrylic bathtubs. You can only use soft napkins and rags, as well as foam products. After cleaning, it is recommended to wipe the walls and polish them with a special compound. Microfiber napkins are perfect - this is a universal fabric that no one can do without.

What household chemicals can be used to clean an acrylic bathtub?

Currently, the retail chain offers a wide range of acrylic care products. If you are in doubt about how to care for an acrylic bathtub, you can pay attention to the following compositions.

A drug	Description
"Cif"	The product does not contain abrasive substances. After treatment, a protective film, which prevents the appearance on the walls.
"Akrilan"	The main feature of the composition is foam, which should be spread over the surface for a while and then washed off.
"Bass"	Recommended for daily use at home.
"Tim Pro"	Additionally eliminates .
"Chister"	Suitable for everyone.

Related article:

: water, household chemicals, folk recipes, miracle microfiber cloth; how to wash complex stains from limescale, stickers and markers from a mirror - read in the publication.

How can you clean an acrylic bathtub at home?

If you have it at hand and you don’t know what else you can use to clean an acrylic bathtub at home, you shouldn’t despair; use folk tricks that always help out in everyday problems. In addition, they have one undeniable quality: they are not harmful to health.

Features of using citric acid and apple cider vinegar

If you don’t know how to clean an acrylic bathtub, it will come to the rescue. To do this you need to follow simple rules:

Fill the bath. The water temperature should be at least 35-40°C.
Add a packet of acid.
After two hours, drain the water, wash the font and wipe it.

Similar actions can be carried out with apple cider vinegar, only the water should not exceed 30°C, and you need to pour 500 ml of acid into it. To remove heavy dirt, you can apply a cloth to it and generously water the area with vinegar.

How to use baking soda and toothpaste correctly

Baking soda also does a great job of removing various stains. Before cleaning an acrylic bathtub at home with powder, you must first dilute it with water to a paste-like state and apply it to contaminated areas. After a quarter of an hour, wash off. If you are in doubt about what else you can use to clean an acrylic bathtub, use regular paste.

This is interesting! Previously, acrylic was used in dentistry, it was used to finish dentures. Therefore, you can also use a paste to clean the bathtub.

However, such procedures should be done no more than once every 2 months, in addition, the composition should not contain abrasive compounds. To clean, you need to squeeze a little paste onto a cloth and wipe the dirty areas with it, then rinse.

Related article:

Home recipes, household chemicals, algorithm of work, how to wash plastic and wooden frames, review modern technology for washing windows: magnetic brushes, robot and windshield wiper, washing vacuum cleaner and a steam cleaner - read the publication.

How to clean an acrylic bathtub at home, depending on the dirt

During operation, quite complex contaminants may appear on the walls of the bathtub. For each of them, you should choose your own cleaning method.

The best folk remedies for cleaning acrylic bathtubs from yellow spots and rust

Yellowness is removed in several ways:

mix ammonia and peroxide in equal parts, moisten the sponge and wipe the stain;
lemon and vinegar in equal proportions;
bleach in powder form, it must be diluted to a pasty state and wipe the stain with the composition;
treat stains with apple cider vinegar.

To avoid unpleasant manifestations of rust on a product, use one of the following tips:

lemon or ammonia, apply any preparation to the stain for a couple of minutes, then rinse;
medical alcohol and hydrogen peroxide in equal quantities, treat the walls with the composition. After half an hour, wash off.

How to clean an acrylic bathtub at home from limescale, sealant or glue and primer

To remove water stains, it is first recommended to use soda and vinegar. If you doubt whether you can wash an acrylic bathtub with soda, we can explain that it should be diluted with water, in this form no damage will be caused to the coating. The algorithm of actions is as follows:

Mix equal parts baking soda and soda and dilute with water.
Apply to damaged areas.
After half an hour, rub a little, then rinse.

You can also heavily moisten rags in vinegar and completely cover the areas damaged by limescale. After 5 hours, remove everything and rinse with warm water.

Sealant

If, after the repair, the housewife finds it on the surface while it has not hardened, it can simply be removed with a cloth. But if time is lost, you need to remove it extremely carefully with a razor or knife.

Primer

To remove the primer, do not use alcohol-containing compounds. Before you clean the acrylic bathtub from the mixture, you need to try to soften it with warm water. To do this, the font should be filled several times, after which the primer will easily come off with a razor.

Acrylic bathtub with hydromassage: care features

Washing should be done in the following order:

Fill the bath 2/3 with warm water above the level of the nozzles.
Pour in some acrylic bathtub detergent and turn on the rinsing system.
After five minutes, turn off and leave for a quarter of an hour.
Drain the liquid and fill the font with clean water.
Repeat the sequence again, but without detergent.
Drain the water and wipe the surfaces.

You should know this! Modern baths can be equipped with a cleaning agent reservoir. In this case, the detergent composition should be poured not into the font, but into the container.

If such manipulations are carried out regularly, a hydromassage bathtub will last for many years.

What cleaning products should not be used to clean acrylic bathtubs?

If you want to enjoy beauty long years, do not under any circumstances use these products in practice to clean off all kinds of contaminants.

It is important! Before washing your acrylic bathtub with a new product, carefully study the composition.

A drug	Consequences
Acetone	It has a negative effect on plastic and corrodes the material.
Abrasive compounds	They remain and thin the enamel.
"Domestos"	Acrylic is not compatible with formaldehyde - this is the answer to the question of whether an acrylic bathtub can be washed with Domestos.
Chlorine	Reduces the service life of the bath.
"Sanox", "Pemolux", "Selit"	The hydrochloric acid in the composition eats away the protective layer.

Conclusion

Caring for acrylic is somewhat more difficult than caring for a cast iron or metal bathtub. But here it is important to carry out cleaning regularly and correctly and not to let it become complexly contaminated. When a new stain appears, you must immediately take measures to eliminate it. Only in this case will the bath delight you for many years.

We hope that when the need arises, you will already know how to clean an acrylic bathtub at home, and be sure to put our tips into practice. Or maybe you have your own recipes? Share with us in the comments, our readers will be interested.

And finally, watch the video on how quickly and easily you can clean the yellow stain from your bathtub.

Acrylic bathtubs are more common on sale today than products made of cast iron or steel. Light weight and relatively low cost make them popular among buyers. But at the same time, acrylic is a rather capricious material that requires careful and careful care.

Standard contaminants

Modern acrylic has dirt-repellent properties. But in the process of active use by household members, sooner or later, the bathroom “overgrows” with stains, it appearance and hygiene are significantly deteriorated. Therefore, many housewives are thinking about the question of how to clean an acrylic bathtub at home?

The most common contaminations for such products are the following:

yellowness. In principle, it is not scary for acrylic and is not its enemy, as, for example, for a bathtub made of cast iron or steel. However, acrylic is not immune from its appearance. The most common cause of yellowness is poor quality water from the tap;
limescale and sediments. Salts various metals contained in tap water, over time settle on the surface of the bathroom, forming limescale;
other spots that may appear during the operation of the product. This is contamination from hair dye or other dyes. Protective upper layer and the smooth surface of acrylic practically does not deeply absorb such contaminants. Therefore, it is possible to wash an acrylic bathtub from such troubles with any special means.

Prohibited tricks

Before you start cleaning such products, it is important to understand what should not be used in such work. The following tools and available materials are considered undesirable:

Abrasive detergents are powders containing crystals. They can scratch the sensitive surface, which will not only ruin the appearance of the product, but will become a breeding ground for bacteria that can easily penetrate microcracks. In addition, the shine will leave the surface of the acrylic, it will become dull and unsightly. Abrasives include not only purchased products, but also improvised ones. For example, baking soda or citric acid undiluted in water, tooth powder, etc.;
chlorine or products containing it. Under its influence, the acrylic surface may darken and swell, and pores will appear on it due to the destruction of the polymer structure. The same applies to substances such as ammonia, acetone and various formaldehydes;
hard brushes, sponges, washcloths. An ideal alternative to such items is a soft cloth;
very hot water. It is no less dangerous for the acrylic surface than acetone or solvent. Under influence high temperature The surface of the bath may become deformed.

Methods for certain types of pollution

Before using one or another product to remove various types of contaminants (store-bought or home-made), it is necessary to test it in an area hidden from prying eyes. This way it will be possible to preserve the appearance of the product, in case the cleaning composition is too aggressive.

How to clean an acrylic bathtub if it is not possible to purchase commercial cleaners? The most common and universal remedy– regular menthol toothpaste. The composition is applied to dirty areas using a soft toothbrush and gently rubbed into the surface. After this, wash off with clean water.

Rust

Rust stains from the surface of acrylic can be removed in several traditional ways. For example:

soap solution and baking soda. Dissolve one teaspoon of liquid soap or two teaspoons of laundry soap shavings in 0.5 cups of water. Add 3 tablespoons to the resulting mixture baking soda, mix well. Treat dirty areas with a cloth soaked in the product and leave for 30-40 minutes. Rinse with warm clean water;
A paste of water and baking soda will quickly clean fresh rust stains on an acrylic bathtub. Mix soda with water and wait until the grains swell, becoming a little softer. Apply the mixture to a sponge and gently rub the dirty areas. Rinse with water;
old rust stain Finely ground table salt will remove it. Sprinkle salt on the stain and gently rub it with a sponge dipped in turpentine. Then wash with warm water and liquid soap.

Important! Any abrasive should be applied to the acrylic surface with extreme caution. Otherwise, you will have to solve another problem: how to remove scratches from the surface of the bathtub.

Yellowness

Clean acrylic bathtub yellow spots You can use products that are sold in household chemical stores. They are designed specifically for acrylic coatings. For example, “Akrilan” or “Tim-Profi”. These compositions can restore even very neglected plumbing products to their original form. Among other things, such products will disinfect the surface. However, you should not abuse them. Too high efficiency is associated with the high content of various chemical compounds and substances in these products that harm not only the acrylic surface, but also the health of family members. Therefore, it is enough to use them for general cleaning of the bathtub (1-2 times a month).

An acrylic bathtub can be cleaned of yellowness using traditional methods and available components that are used by many housewives. These include:

1. Table salt and wine vinegar. You need to proceed as follows:

In a glass container, mix wine vinegar and salt in a ratio of 2:1;
heat the resulting solution in the microwave to a temperature of 70 degrees;
soak in liquid soft cloth and wipe dirty places;
leave for 30 minutes.

Important! Do not overexpose the solution, otherwise it will damage the surface.

2. Citric acid. Dissolve 20 grams of lemon in one glass of water. Spread the resulting composition evenly over the surface of the product with a cloth and leave for 30-40 minutes. After this, rinse with warm water. After this procedure, the bath will acquire its original snow-white color.

Limescale

Limescale deposits on an acrylic bathtub can be removed with citric acid or vinegar. The bathtub needs to be filled to the top with warm water (35-40 degrees). Pour in 0.5 l table vinegar or pour in 50 grams of lemon. Leave for 12 hours, then drain the water and rinse the bath with clean water. It is better not to use these two remedies at the same time. Vinegar can react with baking soda and corrode the surface.

How to properly care for an acrylic bathtub?

Acrylic can withstand shock loads. However, it will not be difficult to scratch it if handled carelessly. Small cracks are favorite places for dust, bacteria, dirt, as well as metal impurities contained in tap water. Therefore, you should avoid the appearance of such scratches and do not place metal buckets, basins, or pans in an acrylic bathtub. Also, you should not bathe your pets in such a bath. They can scratch the surface with their claws.

The more often acrylic is cleaned, the better for the material itself. Regular care and quick removal of stains will simplify further cleaning of the product and there will be no question of how to wash away stubborn dirt.

After each bath or other use, the bathtub should be rinsed thoroughly with clean water and a mild detergent. It could be liquid soap or dishwashing gel. After such a procedure excess moisture must be wiped with a dry cloth or towel. General cleaning of acrylic surface sanitary product should be carried out at least once a month. To do this, you can use substances that are more aggressive than liquid soap and dish soap. The cleaning gel is applied to the interior of the bathroom, left for a few minutes, then rinsed off with water.

To prevent troubles such as lime deposits and yellowing, it is necessary to regularly check the functionality of the taps. Constantly dripping water leaves rusty yellow marks on the surface of the bathroom.

If stubborn stains or microcracks suddenly form on the bathtub, they can be cleaned sandpaper, then rub with liquid acrylic and polish. But without skills, this procedure will not be successful. Therefore, it is better to entrust such a task to specialists.

Acrylic is difficult to clean at first glance. By following the above recommendations, you will be able to keep your bath snow-white and clean for a long time.

Acrylic bathtubs are popular due to their hygiene, ease of installation and lack of corrosion. Such bathtubs require careful maintenance, since the material from which they are made has disadvantages. But there are also benefits . Caring for an acrylic bathtub is the science of cleanliness. Let's try to study it. Acrylic tanks have a good “life span”. They will last for more children, provided proper care behind their surface. In order for a new purchase to “take root” in your home, you need to know how to wash an acrylic bathtub

Features of caring for an acrylic bathtub

Note! Bathtubs made of this material require careful handling! They should not be washed more than twice a month with cleaning products. After each use, rinse the walls of the tank with cool water and wipe with a clean sponge. A couple of times a week, wipe with a sponge and soap, rinse the surface, then wipe with a completely dry cloth. Choose a fabric that is soft and clean.

The bathtub must be wiped dry so that not a drop of water remains in it overnight. And wiping the tank with a sponge every day is a guarantee that your purchase will not have any deposits. This material repels dirt and does not corrode like cast iron.

But if plaque appears, the tank is washed with cleaning agents, and not with soap and water. Because a bath is a hygienic place. If there is plaque on it, it is dirty.

How to choose a cleaning product?

Since comfortable acrylic bathtubs have been installed in apartments in our country, housewives have been asking themselves new problems. : How to clean an acrylic bathtub? Detergents used to wash old cast iron tanks will not work in this case. Acrylic products are not suitable for detergent compositions that contain:

chlorine;
acetone;
ammonia;
formic acid (or other acids).

An acrylic tank cannot be washed with boiling water. It is prohibited to use anti-plaque products containing formaldehyde, ammonia and other corrosive elements. This will cause damage and the bathtub will have to be removed or rebuilt, which is expensive.

Caring for an acrylic bathtub involves the use of special cleaning compounds. But which of them will be of better quality, and what do the manufacturers of these products offer customers? Using "either anything" is not safe for your new bathtub. So which should you prefer? Here is a list of detergents and cleaning products, each of which fully corresponds to its purpose.

Convenient sprayer, delicate aroma of fresh grapes, easy cleaning - just what you need to quickly tidy up your acrylic bathtub

Detergent compositions will help qualitatively. Choose the one from the rating that suits your price category and has a tolerable smell.

Effective cleaning products for acrylic bathtubs

Using cleaning products

Cleaning products are used only in accordance with the instructions for use. These are not abrasive products that are used to wash the surface “until victory”. These detergents and cleaning agents are used differently.

This gel is applied to the surface of the tank (if it is a spray, it is splashed along the surface).
It takes 10 minutes for the product to take effect.
Gently wash off the dirt using a sponge and a stream of warm water.
Rinse again with clean water and dry.

Sometimes all attempts to clear the stone from the bathtub remain in vain. Clear old bath impossible. Try updating your plumbing. These tanks are restored using the technology of applying a new layer of acrylic. will cost less than buying new plumbing.

It will be difficult to clean an old bathtub, only restoration will save you

Folk cleaning products

If you want to save money, then “home cleaning technologies” are also suitable. Western products are more effective, but they have an aggressive effect on acrylic. Traditional methods cleaning is cheaper. Let's give several ways.

using what is in every home? Soap stains are easier to deal with. It's not as annoying as limescale. You can wash acrylic with a few drops of wine vinegar diluted with water. This mixture is safe, but it works no worse than other expensive care products for acrylic surfaces. Lime deposits are difficult to remove even with cleaning agents. But it is possible to get it out.

You will need to do the following:

fill the tank with warm (not hot) water to the top;
pour 1 -1.5 liters of vinegar;
After 10 hours, drain the water and rinse the bathroom with a sponge.

Another trouble that happens is rusty stains on the side of the bathtub from water flowing from the tap. It’s easier to monitor faucets and change them on time than to remove rust. An acrylic bathtub is not subject to rust. There are no other causes of rust besides leaking taps. But if this happens, how to deal with the pollution? How to clean a bathtub from rust?

To remove rust, use either special chemicals, or traditional methods, which cope no worse than their Western competitors cleaners. Citric acid diluted in water in a ratio of 1:2 will help. The secret to preparing the mixture is simple:

A glass of water with diluted citric acid rushes into a bath of water.
Literally after 10 minutes the bath is washed out with water.
It is wiped clean.

Over time, the bathroom becomes yellowish . How to remove yellow stains from a bathtub? Yellow appears on the surface due to rust and salts that it carries with it city water from the tap. This plaque cannot be washed off with abrasives or acid mixtures. You can wash off the yellowness with the same vinegar (9%), or diluted oxalic acid. It is advisable to heat the water in which you will dilute the vinegar or acid, but not too much. Since cheap acrylic does not tolerate high temperatures.

Most used folk remedies for cleaning acrylic bathtubs

Pollution prevention and disinfection

Acrylic high standard Guaranteed to last 25-30 years and looks like new. The acrylic bathtub just needs care and careful operation. Let us mention once again the rules of their operation. In an acrylic bathtub, you should never:

Soak and wash clothes.
Allow acids or alkalis to come into contact with the surface. No abrasive cleaners.
Bathe pets. They scratch the surface of the bathtub with their claws. The disadvantage of the acrylic bathtub surface is its softness and low strength.
Place any basins in the tank, be it plastic or steel, and wash clothes in them. This puts the tank at risk. Scratches will appear.

As long as you stick to a weekly bath cleaning schedule and don't allow any damage, she'll be fine.

Before installing a new bathtub, plumbers recommend carrying out more thorough repairs and replacing the water pipes with new ones. Then he won't appear in the bath yellow plaque. The smooth surface is not subject to “attacks” of fungal diseases or corrosion. But it is advisable to carry out disinfection once a year.

It is not recommended to bathe pets in an acrylic bathtub.

How is disinfection carried out?

How to wash an acrylic bathtub so that there is no doubt that it is disinfected and not dangerous for bathing small children? For disinfection, one more product is needed - Ravak Disinfectant. Product from the Czech company Ravak. The company constantly checks its products for quality and ensures that they are safe to use.

The order is:

The tank is filled to the top.
The product is diluted in a ratio of 1:10 and poured out.
Stir and leave for literally 10 minutes.
Then rinse off with clean water and a sponge.

It is not used often, therefore, it is beneficial to purchase 1 bottle. It disinfects not only the tank, but also the entire bathroom. Ravak Disinfectant costs 600-800 rubles. for 500 ml. But remember, the product is highly diluted with water. After the disinfection procedure, you will be confident that the bathtub is clean and the acrylic is safe from bacteria.

To clean the bathtub from rust and deposits, you will have to purchase a bunch different means, and find the right one among them. After all, everything is learned in practice. Traditional methods of washing acrylic are also effective if there is no money for professional products plumbing maintenance.

Each of the products listed in the rating has both advantages and disadvantages associated with the composition of the substance. There is no optimal detergent composition. If you don’t find the ones listed in your nearest store, another product for cleaning acrylic bathtubs will do just fine. The main thing is to read the composition and make sure there are no chemicals in it: chlorine, ammonia or acids.

Sections