home
Codes
Frame bathhouse 8 by 8. Projects of frame bathhouses with an attic floor

Frame bathhouse 8 by 8. Projects of frame bathhouses with an attic floor

Choice in favor of projects frame baths with attics is great solution if you want to install a bathhouse at your place suburban area. In the usual one, according to tradition, there are only a steam room and a dressing room. Nowadays, thanks to new technologies in construction, buildings, including those built frame method.
The process of assembling a frame bath with an attic





External finishing of the building frame with boards
The main place in such buildings is occupied by the attic. It not only serves as an additional lounge for relaxation, but also impresses with its appearance, gives the bath even more meaningful view. Moreover, this is not required large quantity Money compared to building a second floor above the bathhouse.
Nowadays, there are many designs for bathhouses with an attic. The sizes of these buildings differ from each other. Thanks to this, a bathhouse can be built on absolutely any site, regardless of its size.

Project and cross-sectional diagram of a frame bathhouse with an attic

There are a number of reasons why a person prefers these. These include:


Advantages of frame baths

Frame baths with attics have a number of advantages. Because of them, it is worth choosing in favor of these projects.




These advantages include advantages such as:

  • Relatively fast;
  • The frame bath is not subject to shrinkage;
  • Any materials are suitable for finishing a bath;
  • Simplicity and lightness of design;
  • Economical structure;
  • The construction of a bathhouse does not depend on the time of year.

Types of frame bath projects

All projects of frame baths with attics are similar to each other and they differ mainly only in their sizes.

Project wooden bath with canopy

The main and most popular types of projects include:

Project of a frame bath with an attic size 6*4

This type of project falls into the category of compact buildings. The bathhouse takes up relatively little space. But at the same time, it has everything: a washing room, a steam room, a relaxation room, a spacious attic, that is, everything that should be in this bathhouse project.
. It does attic room even more spacious.

Option for planning a bathhouse measuring 6 by 4
Without exception, all internal partitions are made of frames. For covering partitions and walls indoors. For the walls in the paired compartment - aspen lining.
If desired, such a bathhouse can become small but cozy.





Project of a frame bath with an attic size 6*6

This type of project, among many others, has gained the greatest popularity, as it has its undeniable advantages:

  1. Low cost. This is possible due to the absence of overpayment for extra cubic meters of wood.
  2. For .
  3. Variety of building configurations. The timber can be processed relatively easily. Figures of any shape and size are cut out of it. The load-bearing capacity of the structure does not suffer at all.

Layout of all floors of a frame bathhouse with an attic 6 by 6 meters
Such a bath does not need additional work related to the external decoration of the walls of the building. This allows you to significantly save money and not waste extra time.

It consists of wall thermal frames (sometimes sip panels), roofing materials, floorboards, timber for mounting the frame, components of fastening elements, accompanying documents.

Variant of the design of a bathhouse covered with metal tiles

The list of documents should include the bathhouse design itself and detailed instructions for building assembly. All documents must comply with safety rules for the construction of frame structures. In this case, during the process of assembling the bathhouse, all that remains is to follow the attached instructions and observe all safety rules. Watch the video: an overview of the project and construction of a 4x5 frame bathhouse with an attic.

  • The foundation is support-column. 4 blocks 200x200x400 per cabinet cement screed. The cabinets are installed on compacted sand cushion. Sand (or ASG) is provided by the customer.
  • Waterproofing of the FOUNDATION pedestals - roofing material in one layer.
  • Strapping - timber natural humidity(spruce/pine AB) with a section of 150*100 mm. Along the outer perimeter the strapping is laid in two rows.
  • Floor joists - chamber-drying board (spruce/pine AB) with a section of 150x40 mm, with a pitch of 600 mm.
  • The subfloor is a chamber-dried edged board (spruce/pine AB) with a section of 19/22*100/150mm. Vapor and waterproofing - NANOIZOL S.
  • The piping, joists and subfloor are treated with the protective non-washable composition NEOMID.
  • Floor insulation - min. KNAUF/URSA cotton wool 100 mm thick. Vapor barrier - NANOIZOL "V".
  • Finish floor of the first floor, attic (if there is one according to the project) - tongue and groove batten chamber drying (pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
  • External walls and gables - frame made of chamber-drying timber (spruce/pine AB) with a cross-section of 40x100mm. The frame is treated with the fire-bioprotective composition NEOMID.
  • External cladding walls, gables - chamber-drying lining (spruce/pine AB) 15-17 mm thick. Wind and moisture protection - NANOIZOL A. Counter grill - bar 20*40 mm. Ventilation gap - 20 mm.
  • Wall insulation - ROKVUL basalt slabs, 100 mm thick. Vapor barrier - NANOIZOL V.
  • Internal wall cladding - chamber-drying lining (spruce/pine AB) 12.5*96mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
  • Partitions - frame made of chamber-dried timber (spruce/pine AB) with a cross-section of 40x75mm. The frame is treated with the fire-bioprotective composition NEOMID.
  • Heat and noise insulation of partitions - ROKVUL basalt slabs 50 mm thick. Vapor barrier - NANOIZOL V.
  • Sheathing of partitions - chamber-drying lining (spruce/pine AB) 12.5 * 96 mm, along racks.
  • Finishing the walls and ceiling of the steam room is chamber-drying lining (aspen AB) 14*90 mm. Counter rail 10*30 mm. Ventilation gap - 10 mm. Heat-reflecting insulation on a foil base - NANOIZOL FB.
  • Installation of the ERMAK 12 stove with a hanging tank (stainless steel 35 l) for heating water. The base of the oven is made of bricks on edge in one row. Cutting the combustion portal - brick. Fire insulation - ROCKWOOL basalt slabs, basalt cardboard, protective screens and flush sheets made of smooth galvanized steel sheets, ceiling and roof passages.
  • The chimney is vertical. Sandwich pipes 115*200 mm with an outer contour made of galvanized steel. Gate valve.
  • Installation in a washing room shower tray 800*800 mm with siphon. Exiting the drain outside the perimeter of the bathhouse.
  • The finishing of the walls and ceiling around the pallet is PVC lining. White color.
  • The clear ceiling height of the first floor (from floor to ceiling) is 2.20 m for one-story baths. The ceiling height of the first floor is 2.30 and the attic is 2.20 m, for baths with an attic.
  • The staircase to the second floor (for baths with an attic) is on strings made of planed timber, with steps made of floorboards. Handrail and fencing in the attic made of planed timber 40*100 mm.
  • The ceiling lining of the GROUND FLOOR (except for the steam room) is chamber-drying lining (spruce/pine AB) 12.5*96 mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
  • Floor insulation - min. KNAUF/URSA cotton wool, 100 mm thick. Vapor barrier - NANOIZOL V.
  • The roof is gable, mansard (broken) or multi-gable (several slopes) depending on the project.
  • The height of the roof at the ridge is 1.20 m (for one-story baths). Roof height at the ridge - 3.50 m (for baths with an attic)
  • Insulation of attic walls (for baths with an attic) - ROKVUL basalt slabs 100 mm. Vapor barrier - NANOIZOL V.
  • Insulation of the attic ceiling - KNAUF/URSA mineral wool 100 mm thick. Vapor barrier - NANOIZOL V.
  • Finishing the walls and ceiling of the attic - chamber-drying lining (spruce/pine AB) 12.5 * 96 mm. Sewn along the rafters through the Nanoizol V membrane.
  • Rafters - trusses made of chamber-dried boards (spruce/pine AB) with a cross-section of 40*100/150 mm. The rafters are installed in increments of 800 mm.
  • Roof sheathing - chamber drying board (spruce/pine AB) 22/25*100/150mm. Counter grille - block 20*40 mm.
  • Rafters, sheathing and counter-lattice are treated with the fire-bioprotective composition NEOMID.
  • Covering - ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting.
  • Eaves and roof overhangs with a width of 200 mm (for one-story bathhouses) and 300 mm (for bathhouses with an attic) are lined with chamber-drying lining (spruce/pine AB) 17*90 mm.
  • The windows are wooden. Double glazing on silicone sealant, through an aluminum strip. Inward opening doors. Screw-in hinges, twist locks. Dimensions (height*width): 1200*600/1000/1200/1500mm; 600*600 mm, 400*400 mm.
  • Entrance door, interior doors- wooden, paneled, polished (spruce/pine A). Size (height*width) 1800x800 mm - for one-story baths, 2000*800 mm - for baths with an attic. Handles, hinges. Entrance door with lock.
  • The doors to the steam room and washing room are bath frame (aspen A). Size (height*width) 1750*750 mm. Handles, hinges.
  • Windows and doors are installed in mounting boxes. Technological gaps are filled with polyurethane foam.
  • Open terrace, porch (if available). Supports - planed timber (spruce/pine AB) with a section of 100*100 mm. The fencing is planed timber (spruce/pine AB) with a cross-section of 40*100 mm filled with carved (flat) balusters. The floor is a dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments. Ceiling - lining (spruce/pine AB) 17*90 mm.
  • Sealing of corners, joints, abutments - plinth (spruce/pine, aspen AB) 40/45mm.
  • Finishing windows, doors - platband (spruce/pine, aspen AB) on both sides.
  • Hardware: black construction nails, galvanized construction and finishing nails, self-tapping screws, galvanized steel perforated fasteners (corners, plates)
  • Delivery up to 400 km from our base (https://www.google.ru/maps/@58.5898152,35.7784028,13z) + unloading of the house kit.
  • Assembly of the bathhouse at the customer's site.
  • BONUS: accessories for the steam room. Stones for the stove - gabbro-diabase 40 kg.

They built a house for me in 2018, according to my design, by professionals in their field. The project itself is somewhat more expensive compared to its competitors, but in our village they built one more house and the owners were satisfied.

We ordered the construction of a bathhouse, they completed it in the shortest possible time, without any complaints about the work of the team.

The full cycle from material production to house assembly is organized perfectly. Quality, professionalism top level. I recommend.

It is very important to find your own manager who will advise not only when concluding a contract, but also during construction. We talked with Igor, as a result, the bathhouse is ready on the site, we are using it, everything is fine. Thank you.

Great houses, great service! They told us everything and helped us with the choice. You can see everything live - we went to a facility under construction roughly similar to ours, where we saw how they work, only after that we decided to build. We thank the managers and builders for their patience in answering all the questions!

In 2018 we ordered a bathhouse. We are very pleased with the work of the employees of this company. Starting with the estimate and ending with the construction team. We were lucky because of the promotion and received a sauna stove as a gift!

Thank you for the house with a sauna. The website lists some prices, but in reality it turns out to be more. But it’s understandable that the price indicated is for the very minimum, like everyone else on the Internet, if you want comfort, pay extra for extras. In general, “thank you” to the builders.

Foundation: from screw piles 2.5 m long, 108 mm in diameter. The inside of the pile is filled with cement-sand mortar. Waterproofing along the top of the pile head with 2 layers of roofing material. The strapping on piles made of 150x150mm timber is secured to the piles with self-tapping screws (at least 2 pieces per pile).

Exterior walls: frame 150mm insulation (3 layers); bottom harness from a board 40x150mm, with timber strapping. The top frame is made of 40x150mm boards. Racks made of boards 40x150 with a pitch of no more than 600mm, insulation 3 layers Knauf t.150mm (slabs), vapor barrier 2 layers. External wall cladding with clapboard (imitation timber), interior lining clapboard walls.

Partitions: the bottom trim is made of boards 40x100 mm. The top trim is made of boards 40x100 mm. Intermediate racks made of boards 40x100 mm with a pitch of 600 mm, insulation with Knauf mineral wool boards 100 mm thick, 2 layers of vapor barrier. Covering the partitions on both sides with kiln-drying lining.

Attic: longitudinal walls of the attic - frame 150 mm thick from boards 150x40 mm with a pitch of 600 mm, wall cladding with clapboard on the room side, on the roof side with edged boards 22 mm thick, loose, with Knauf insulation 150 mm thick ( mineral wool slabs) in 3 layers and vapor barrier in 2 layers.

Room gables: frame 150 mm thick from boards 150x40 mm with a pitch of 600 mm, covered with clapboard on the room side, clapboard on the street side (imitation timber), with Knauf insulation 150 mm thick (mineral wool boards) in 3 layers and vapor barrier in 2 layers.

Attic gables and roof cavities: frame 150 mm thick from boards 150x40 mm with a pitch of 600 mm, cladding on the street side with clapboard (imitation timber) with a vapor barrier in 1 layer.

Floor: rough flooring made of 22 mm edged boards, floor joists - 150x50 mm with a pitch of 600 mm along timber lining, finishing floor - tongue-and-groove floor boards 26-28 mm thick. Insulation with Knauf mineral wool 150 mm with a vapor barrier. Antiseptic treatment of logs, subfloors, timber frames.

Overlap: ceiling made of 150x40 mm boards with a pitch of 600 mm, insulation with 100 mm Knauf mineral wool with a vapor barrier, the ceiling is hemmed with kiln-drying lining.

Internal height of premises: 1st floor 2.3 m, attic 2.2 m..

Rafter system: from boards 150x40 mm with a pitch of 600 mm, sparse lathing from edged boards 22 mm.

Roof: metal tiles, color to choose from: red, green, brown.

Roof lining: wide lining. The width of the roof overhangs is 420mm. The width of the gable cornices is 420mm.

Window: PVC 2-chamber (3 glasses), window glazing.

Entrance door: metal with a lock.

Interior doors: paneled, door to the steam room (linden).

Bath equipment: in the steam room there is a wood-burning stove “Rus 18 L” with a screen for stones or a water tank to choose from, on the firebox side there is brickwork. IN attic 80 liter water tank with electric heating element. Shower tray with shower head and shower connections.

Steam room: The walls and ceiling are covered with Class A clapboard (linden) with a foil gasket. The lining is nailed onto the frame (instead of coniferous lining). Canopy made of linden boards.

Electrical: RCD, automatic devices, panel, switches, sockets, sockets, lampshades, wires, boxes.

Veranda: floors: logs made of boards 150x50mm with a pitch of 600mm along timber strapping, floor covering - floor board t. 26-28mm. Flooring: made of 150x40mm boards with 600mm pitches, the ceiling is hemmed with clapboard. Pillars made of timber are strict. 150x150mm, frame made of haystack timber. 150x150mm. Fencing made of balusters and handrails. On the veranda, the floor board is not tongue-and-groove, chamfered, and installed with a gap to prevent water collection. Entrance steps: planed lumber with balusters and handrail, on concrete slabs.

Delivery: to the customer’s site up to 100 km from the production base of Master LLC: Moscow region, Bronnitsy. Unloading and assembly and installation works.

Sections