Those who like to sit with a fishing rod have often come up with the question of how to make a fishing table with their own hands. You can, of course, buy it, but manufacturers rarely guess the wishes of customers and instead of the desired option, they are either too high, sometimes too small, sometimes unstable, sometimes of poor quality. This list of disadvantages can be continued for a long time, but here it is: fishing table with your own hands you will definitely like it.

Experienced fishermen consider it mandatory to have a bait table. It helps you keep track of all your small items, saving time and keeping you organized. Based on their structure, the following types of tables are distinguished:

• use of material in the frame and legs of the chair;
• use of material in the manufacture of countertops;
• by design: folding and non-folding models.

Wooden table for fishing trips

Stage 1 Stage 2
Stage 3 Stage 4
Stage 5 Wooden table ready

Procurement of materials for work

You can make a feeder attachment table yourself at home. This option will not be disassembled, but in general it will also not take up much space. A folding table requires a more careful approach, but its demand will not be too frequent. Yes, and even in assembled form it does not take up much space in any transport. If you still want to have folding legs, then you should use special corner fasteners that will control bending and firmly secure them in the required position. A DIY fishing table requires the following tools for its manufacture:

1. The tray is the size you choose, the material of the tray does not matter.
2. PVC pipe for electrical cable.
3. Corners for securing the legs of a fishing table.
4. Plugs.
5. Stainless steel screws.

All installation work can be done at home. We begin to make a table with our own hands for fishing from the main frame, which will consist of pipes and to which the tray will be attached. The corners serve as frame holders; they help make the structure more durable and strengthen the legs. The legs are subsequently attached to this frame, and all the attachments in the form of plugs are put on last.

You can decorate the table with special hooks, on which you can hang bait when the opportunity arises. You can also put a cover with a pocket on it, creating additional space for small fishing items. When fishing great importance has a convenient arrangement of devices, because in this matter the correct reaction plays an important role.

Tray table

Tees 4 pcs. From the end polypropylene pipe the chamfer is removed to a length of about 8 mm. When planting, the heated surface layer polypropylene, forming a roller, and with proper heating, planting is quite simple
Legs made from cheap telescopic rods Frame consists of two load-bearing elements, connected by ties to give it rigidity. You can begin attaching the tray to the manufactured “frame”. But first you need to cut off the corners of the tray, ensuring a tighter fit on the frame
The result is “heads” that are very convenient for rotation. For convenience, we equip the screws with caps from PET bottles. We supply the tubes with tips
Making crossbars You can equip the table with an umbrella

When going fishing light, you have to make do with minimal equipment. When fishing for a long time, it can be very inconvenient to constantly bend down to the ground to take bait, groundbait or other equipment. I suggest how you can quickly make a light table from cheap materials, weighing only 1.5 kg and with a load capacity of 10 kg.

Materials used

To make the table I used:

• polypropylene water pipe – 2 m;
• aluminum tube d 8 mm – 2 m;
• pipe clips – 22 pcs.;
• food container with lid capacity 1 l;
• lid for a plastic box 510x380 mm;
• furniture mounting angles – 4 pcs.;
• pipe plugs – 4 pcs.;
• a package of M4 screws with nuts and washers;
• M5 dowels with self-tapping screws – 8 pcs.

Making a collapsible table

Will be used as a table top plastic cover for the container. To make the legs, you need to cut the polypropylene water pipe into 4 pieces of 50 cm each.

First you need to make fastenings for the legs of the table. To do this, you need to attach clips to furniture mounting corners. water pipes. They already have holes, so you just need to tighten everything with a screw, nut and washers. The resulting fastening is placed at the corners of the cover, and marks are made for the holes. They are burned with a hot awl. After this, the supports are fixed to the tabletop.

Once the fastenings are ready, the legs can be put back in place.

Next you need to install spacers to add stability. To do this you need to cut aluminum pipe into pieces of suitable length. It is best if the spacers are a little larger, then the legs will become more stable.

You need to drive dowels into the ends of the tubes. Then the clips are screwed to them using wood screws.

The table is almost ready. It remains to improve the design a little. You need to press plugs into the ends of the legs to protect them from dirt.

To be able to fold the removed legs under the tabletop, you need to attach 4 clips along the narrow edge to it. Holes are drilled in the lid for fastening the clips with screws.

Now you can place transverse aluminum spacers diagonally under the tabletop, and clamp the legs themselves in clips.

Its dimensions are: 49x33x3 cm. You can also use a smaller tray with dimensions of 27x39 cm. It depends on the preferences of the fisherman. For some, a miniature table is enough, while others need a more spacious one. It should be said that it is more convenient to knit installations and equipment elements on a standard table.

We also need 4 legs. Can buy pvc pipe, which is used when installing electrical wiring or in sewers. The diameter of the tube is 2 cm.

We will attach the legs using plastic corners, which we will also buy in the same store as the pipes.

From the tools we will need a screwdriver and self-tapping screws 3 cm long, with which we will form the structure. We also need glue to connect the halves of the corners

The cost of a homemade table does not exceed 7-8 dollars. If you buy branded tables, you will spend 4-5 times more money. What's good about a homemade table? When folded, it will fit into a medium backpack. It is advisable to choose a small handbag or case for it.

While fishing, you will see for yourself how comfortable it will be when all the necessary attachments are located at arm's length. Many operations have to be done on your knees, and some attachments remain untouched because you are too lazy to take them out or they are conveniently forgotten.

If you have a table like this, you can lay out all the attachments, extractor, small boxes and attractants as conveniently as possible. You won't need to reach into your backpack every time for some small change. You can also tie a leash, rigging or installation by laying everything out on the table necessary accessories and tools.

Good fishing online stores will allow you to purchase any fishing goods at favorable prices!

The fisherman's calendar will allow you to understand how all the fish bite depending on the time of year and month.

The fishing gear page will tell you about many popular gear and devices for fishing.

Fishing baits - we describe in detail live, plant, artificial and unusual ones.

In the bait article you will get acquainted with the main types, as well as tactics for using them.

Learn all the fishing baits to become a real fisherman and learn how to the right choice.

Work order

First you need to cut two tubes, slightly shorter than big side tray. They will be used to attach the legs.

After this, we attach the corners to the tubes. These corners consist of two halves. To prevent these halves from detaching, the fastening points must be lubricated good glue and press well.

The corners of the tube must be greased with PVC glue and then placed on the tubes.

As a result, we should have the following two fasteners.

The next stage of work is that we must screw the tubes at the bottom of the tray with self-tapping screws.

First, you need to make markings in the places where we will attach the screws. Take a marker and make marks on the tube and on the table top.

After this, we drill holes using a screwdriver at all marks.

Drilling into a countertop is easier than drilling into pipes. Therefore, it is necessary to hold the tube well so as not to miss.

After all the holes are drilled, we begin assembling our table. We take self-tapping screws and screw them in from the top of the table, having first placed our tubes under them.

This stage is the most difficult, since you need to ensure that the holes on the table and tubes match. This operation must be carried out very carefully so as not to damage the parts.

For reliability, you can screw one self-tapping screw on each of the 4 sides of the tray where the corners meet the side.

It should be noted that the resulting design is quite reliable. Everything holds up well, and you don’t have to worry about the integrity of the table in the future.

They can also be purchased at an electrical supply store. These plugs will allow you to install the table on various surfaces. Thanks to them, our product will take a stable position, and dirt will not get inside the legs. We choose plugs with the same diameter as our tubes.

Before putting the plug on the leg, lubricate the outer part of the tube with glue to firmly fix this element. The glue is suitable for rubber or for PVC products.

It can be purchased at the same store. Having screwed this clip with self-tapping screws to plastic container, we can fix it to the leg.

You can place attachments in this container and place it under the table so that direct sunlight does not damage it. You can attach several similar containers and place bloodworms, maggots, worms and other baits in them. This way you will extend their life and they will remain useful throughout the fishing session.

Do you still put bait and tackle on the ground? It's time to get a special table. The prices for it in fishing stores are rather high (USD 30-100), but you can pick up a small suitable table for a picnic and remake it to suit your needs.

But you can also make a table with your own hands that will make life easier when fishing and can be useful for outdoor recreation. Bait, bait, flavors, dips and necessary feeder accessories - all this can fit on the table and be always at hand. And this is time saved that can be put to good use.

Homemade fishing tables can be divided into several types:

1. According to the materials used in the frame and legs. They come in metal (usually aluminum) and PVC materials(more like a water pipe or electrical wiring).
2. According to the material of the tabletop. The simplest tabletop is a plastic tray the right size. Instead, you can use laminated plywood, window sills, galvanized and aluminum sheets.
3. By design. They do it more often simple models who don't understand. Although such tables are small in size, they require space during transportation. More complex designs have removable legs, adjustable in length.

Do-it-yourself attachment table made of PVC materials

In the first version, the entire frame is assembled with your own hands from a PVC tube, and the surface is from a tray. The main disadvantage of such a device: it cannot be disassembled.

For this design we will need:

• Tray of suitable size. Serves as a tabletop work surface. It should accommodate the feeder's necessary things for fishing.
• Rigid PVC pipe for laying cables (electrical wiring).
• Corners - for attaching table legs.
• Plugs.
• Stainless steel self-tapping screws.

A frame for the tray is made from the pipe. The frame is fastened with self-tapping screws, and a corner is attached to its ends. Legs of the required length are soldered or glued to the corner.

PVC table

The easiest way to make a feeder attachment table is to use a bookcase. Some plastic bookcases are sold by section. You just have to choose a model that fits the size. We get finished surface with small legs that can be extended with the same PVC pipes.

The easiest and most inexpensive way

We make an attachment table from a metal structure

Aluminum is the most commonly used material for a homemade feeder table. Its main advantage is its strength and low weight. They use an aluminum corner for the frame, pipes for the legs, and sometimes sheets for the table top.

The first option for fishing from Vladimir Kruglov. For it you will need:

• Aluminum corner.
• Pipes made of the same material.
• A suitable piece of window sill - used as a table top.

The corner serves as a frame; its edge prevents feeder accessories and baits from falling during fishing. The legs are made up of two pipes different diameters, which allows you to adjust the height while fishing. Window flashing (painted sheet metal) provides a durable and pleasing surface.

Angle design

Manufacturing

The next option for a metal fishing table. In this option, the frame and fastenings for the legs are welded, which makes the structure even stronger. To reduce weight, the author suggests using three legs. You can cut a circle in the tabletop for a container with maggots, another attachment or bait for the feeder.

Welded frame

In the next video, the author offers a model of a fishing table made from sheet aluminum. The corner for fastening the structure is not used. The plate is bent at the edges, forming sides. For this option you will need:

• Aluminum sheet.
• A strip of metal for the frame.
• Metal pipe for legs or attachment to a fishing chair.

And another option with telescopic legs. Although such an attachment table is more suitable for winter fishing, but it’s not difficult to convert it to attach to a chair, or add legs to stand on the ground separately.

Model with sliding legs

Buy from good discounts for personal use and as a gift to friends and acquaintances.

Buy quality products at affordable prices V . Give gifts to yourself and your loved ones!

Subscribe to us on Facebook, Youtube, Vkontakte and Instagram. Stay up to date latest news site.

How to make a table for attachments

Table of contents:

In feeder and float fishing you have to use a lot of baits, bite activators and rigs. To ensure that all the necessary accessories are always at hand, it is convenient to use a small table. It can be purchased at specialized fishing stores. But some fishermen decided to make this accessory themselves using improvised materials.

In this article we will look at how to make an attachment table yourself, what materials and tools will be required. Let's learn how to use the table.

Necessary materials and tools for making an attachment table

Our goal is to obtain a relatively inexpensive, lightweight and functional table. We will need a standard plastic tray of this type:

Its dimensions are: 49x33x3 cm. You can also use a smaller tray with dimensions of 27x39 cm. It depends on the preferences of the fisherman. For some, a miniature table is enough, while others need a more spacious one. It should be said that it is more convenient to knit installations and equipment elements on a standard table.

We also need 4 legs. You can buy a PVC pipe, which is used when installing electrical wiring or in sewerage. The diameter of the tube is 2 cm.

We will attach the legs using plastic corners, which we will also buy in the same store as the tubes.

From the tools we will need a screwdriver and self-tapping screws 3 cm long, with which we will form the structure. We also need glue to connect the halves of the corners

How to make a fishing table for baits with your own hands

First you need to cut two tubes, slightly shorter than the larger side of the tray. They will be used to attach the legs.

After this, we attach the corners to the tubes. These corners consist of two halves. To prevent these halves from detaching, the fastening points must be lubricated with good glue and pressed well.

The corners of the tube must be greased with PVC glue and then placed on the tubes.

As a result, we should have the following two fasteners.

The next stage of work is that we must screw the tubes at the bottom of the tray with self-tapping screws.

First, you need to make markings in the places where we will attach the screws. Take a marker and make marks on the tube and on the table top.

After this, we drill holes using a screwdriver at all marks.

Drilling into a countertop is easier than drilling into pipes. Therefore, it is necessary to hold the tube well so as not to miss.

After all the holes are drilled, we begin assembling our table. We take self-tapping screws and screw them in from the top of the table, having first placed our tubes under them.

This stage is the most difficult, since you need to ensure that the holes on the table and tubes match. This operation must be carried out very carefully so as not to damage the parts.

If everything is done correctly, you should end up with something like this:

For reliability, you can screw one self-tapping screw on each of the 4 sides of the tray where the corners meet the side.

It will turn out like this:

It should be noted that the resulting design is quite reliable. Everything holds up well, and you don’t have to worry about the integrity of the table in the future.

The final stage will be making the legs and threading them into the corners. The length of the legs is 30 cm. We cut them out with a hacksaw. Pre-measure and make marks with a marker at the required distance. The result should be identical legs like this:

We will also need rubber plugs of this type:

They can also be purchased at an electrical supply store. These plugs will allow you to install the table on various surfaces. Thanks to them, our product will take a stable position, and dirt will not get inside the legs. We choose plugs with the same diameter as our tubes.

Before putting the plug on the leg, lubricate the outer part of the tube with glue to firmly fix this element. The glue is suitable for rubber or for PVC products.

After this we put on the plug, and we should get something like this on all legs:

Most final stage work is threading the legs into the holes of the corners:

After all the work, we will have this neat and functional table for baits and various fishing little things:

We see that the box is attached to one of the legs using a plastic fastening element - a clip. It looks like this:

It can be purchased at the same store. By screwing this clip with self-tapping screws to a plastic container, we can fix it to the leg.

You can place attachments in this container and place it under the table so that direct sunlight does not damage it. You can attach several similar containers and place bloodworms, maggots, worms and other baits in them. This way you will extend their life and they will remain useful throughout the fishing session.

Advantages of a homemade bait table for fishing

The cost of a homemade table does not exceed 7-8 dollars. If you buy branded tables, you will spend 4-5 times more money. What's good about a homemade table? When folded, it will fit into a medium backpack. It is advisable to choose a small handbag or case for it.

While fishing, you will see for yourself how comfortable it will be when all the necessary attachments are located at arm's length. Many operations have to be done on your knees, and some attachments remain untouched because you are too lazy to take them out or they are conveniently forgotten.

If you have a table like this, you can lay out all the attachments, extractor, small boxes and attractants as conveniently as possible. You won't need to reach into your backpack every time for some small change. You can also tie a leash, rigging or installation by laying out all the necessary accessories and tools on the table.

They will allow you to purchase any at competitive prices!

To become a real fisherman and learn how to make the right choice.