Innovations in radius compartment doors. Find out how to choose the right quality radius wardrobe

home

Codes

Sections of the article:

The modern market for door products is overflowing with many different proposals for closing the openings between rooms. Popular among them are hinged products and sliding structures. But among all this mass of ordinary door solutions there is something new and extraordinary. These are radius doors. These designs allow you to add your own flavor to any interior.

Non-standard solution

Today, such products are being discussed more and more. For inexperienced buyers, this is, of course, a new product. The features of these systems are little known, as is their design. This is very simple to explain - radius doors have been widely represented on the markets of our country for only two to three years.

For sophisticated buyers, manufacturers have already presented many different partitions in the most different versions. For example, among sliding doors suspended, hidden mechanisms are presented. Traditional swing, folding and lifting systems are also offered.

Radius doors are the latest innovative idea for closing the openings between rooms. These designs are in wide demand where it is necessary to create a unique and original interior. The design features will allow such a door to give the interior a non-standard shape.

Interior sliding partitions and radius doors are distinguished by smooth corners and smooth line transitions. This design is completely free of any straight lines. Doors come in different sizes according to their design. They may have different shape, as well as curvature. Standard solutions are called radial.

Areas of use

The main difference between radius doors and sliding doors is that main function This is not about saving valuable space. The maximum benefit can only be obtained if installed in large, spacious, well-lit rooms.

But such designs can also be found in small city apartments. In this situation, they solve the problem of separating some space. For example, they often create an “island” kitchen. But at the same time, radius sliding doors should not contradict overall design. It is necessary that the partition be combined with other parts that have a streamlined outline.

Modern designers claim that the absence of right angles makes a room of any size more spacious. If necessary, you can even purchase single-leaf radius structures.

Solutions based on radius doors will look great in apartments or country houses, offices or administrative premises, business centers. The design of the walls, which can have a round shape, encourages the purchase of such systems. Today, such buildings can be seen more and more often.

As for the styles where these products would be appropriate, these are modern, pop art, techno. Exclusive and refined solutions with luxurious finishes, stained glass windows can fit perfectly into Baroque style rooms.

The price of originality

Among other sliding models that are offered on the modern market, radius products are considered the most exclusive and the most expensive. They are bought in most cases for luxury interiors.

Even the simplest single-leaf radius compartment doors can cost from 70,000 rubles. A model that has original finish, and more than two canvases will cost from 100,000, and in some cases from 200,000 rubles.

Designs, types, forms

By design features these canvases and blocks are practically no different from traditional ones sliding solutions. The only difference is in the shape of the valve, which is most often semicircular. The radial block is equipped with roller mechanisms. An aluminum profile is used as a frame for the door.

The frame can be finished with absolutely any type of materials to suit your taste, as well as based on interior needs. Types of finishing include plastic, wood, glass and other materials.

In frequent cases, the designer’s imagination can combine several types of door blocks in one partition. For example, some radius doors can combine not only sliding, but also hinged and even fixed leaves.

As for classification, these products are distinguished by shape. So, the door can have a concave or convex shape, round or oval. Combined solutions are also sometimes used.

An interior door in this format can have different appearance and design. Among the canvases, solid, partially glazed or combined, fully glazed options are offered.

Based on the opening method, there are radius sliding doors, which occupy a leading position and are in high demand, but there are other types. There are classic swing doors, where the doors are made in an unusual design. Manufacturers also offer folding partitions. Fixed partitions are also available. But they are no longer doors.

Radial production technology door designs similar to the process of making furniture facades.

Design Features

The design features of radius sliding doors and leaves with other types of opening have a number of undeniable advantages. It should also be said that in typical systems There are practically no shortcomings, which makes these models an excellent purchase.

The ceilings can fit perfectly into absolutely any type of interior, modern or classic apartment, and country houses the most various types. These canvases perfectly complement the design in buildings that were built according to original designs. In such buildings, like nowhere else, non-standardism in internal equipment and interior design is necessary.

Sliding systems have advantages over swing systems. They still save space. This makes it possible to install the leaf in places where a swing door cannot be installed. Such a door uses only two leaves, and sliding design may consist of four or more leaves. Canvases and blocks can be moved apart along the walls or cascaded to one side.

The suspension system allows you to completely get rid of thresholds. The upper mechanism is quite powerful and will support the weight of the canvas. If necessary, a virtually invisible bottom rail can be installed in the floor.

Materials

For production and also for decorative finishing only the most quality materials. Due to this, the radius interior doors have such a high price. Most often these models are made according to individual orders. But there is also ready-made options, which are no worse.

As for the materials themselves, these are usually natural wood of expensive species, veneer of the same expensive types of wood, leather and aluminum.

Great choice for a special style

If you need to create special style, such solutions are preferred by lovers of the East and its culture, as well as connoisseurs of Feng Shui. In this culture, right angles and traditional sharp lines are unacceptable. The radial door is fully capable of satisfying these needs. In addition, the finish can be almost any, which will allow you to choose the right product even for exotic interiors.

Another advantage of radial door blocks is a visual increase in space area, expansion of boundaries, and division of the room into functional zones.

Disadvantages of radius sliding solutions

It is imperative to take into account the parking location of the canvas when using a system with an external mechanism. The finishing of the canvas is selected based on this. In this case, it is best to choose the cascade option. It will significantly save space.

Another disadvantage is the noisy operation. Rollers sliding mechanism the hanging canvas will in any case make sounds during operation. Manufacturers are trying to develop silent designs. There are even similar models on the market, but their prices are very high.

Often, the canvases are already equipped with everything necessary fittings. But if you need to purchase handles, choose those that can be integrated directly into the canvas.

Installation methods

Swing radius models are attached in the same way as traditional ones. On door frame there are loops.

In the case of radius sliding doors, the guides are fixed to the ceiling or to the wall. There are also mechanisms for mounting on a doorway. But this is only available if the doors slide inside the wall.

Sliding models can have two types of fastening - a compartment and a hanging mechanism. A coupe is when guides are installed above and below the canvas. The hanging mechanism is installed only on top of the canvas.

Profile Features

Radius partitions are very attractive with their profile. Thanks to it, radius doors, for example, for a dressing room, allow you to create unique shapes, decorated with stained glass windows with a luxurious finish.

Among all the available types of profiles, the most popular is aluminum with various alloying additives. Technologies will allow you to create a profile with a laminated coating, and the color range is amazingly diverse.

Although these designs have a very high price, due to their features they allow you to create unique interiors and make even the wildest design dreams come true. Today, these products attract many owners of luxury housing who strive for originality, elegance, spaciousness and follow the latest fashion trends in the form of interior solutions and construction.

Assembling furniture with your own hands is not an easy task, but with the right approach, the result of the work always pleases with its uniqueness. If a radius sliding wardrobe from the manufacturer for some reason does not satisfy the consumer, then the option of building a radius sliding wardrobe with your own hands is possible. If you follow all the instructions, this can be done even by a non-professional.

Space saving - the cabinet does not have a regular swing door, therefore does not require additional space for opening.
Visual increase in space - many models of sliding wardrobes have mirrored or glass doors, which allow you to expand the space of the room.
A radius wardrobe gives the room a more modern look.
Wide selection of individual design solutions.
Possibility of recessed lighting.
Using the walls of the room as closet walls.

Radius sliding wardrobes from the manufacturer

There are many manufacturers of radius sliding wardrobes that offer the most various options and design solutions. Let's look at some of them.

Factory Individual furniture offers the development of individual radius sliding wardrobes. Many models of radius sliding wardrobes, from concave and convex to curved and wavy, will delight you with their design and spaciousness. Austrian and German sliding systems guarantee quality and durability. A special program helps you calculate the cost of a cabinet directly on the Internet.

The Venta Furniture company makes radius sliding wardrobes taking into account all the client’s wishes. It is possible to develop any radius sliding wardrobe you like remotely, the main thing is to indicate the dimensions correctly, and specialists select ready-made radius sliding wardrobes to suit the interior of the room.

Radius Line uses Newest technologies printing in the manufacture of radius sliding wardrobes. If desired, any photo or drawing is applied to the cabinet door. High-quality radius sliding wardrobes for a children's room will not only decorate the room, but also ensure the safety of children.

Raumplus (Germany) is a world leader in the manufacture of radius sliding wardrobes. Provides a warranty of 7 to 10 years. When making a radius sliding wardrobe, it is possible to select other furniture that will harmoniously fit into the interior of the room. The sliding door system complies with all international standards.

Radius sliding wardrobes photo:

The WOW Furniture company has been producing radius sliding wardrobes for more than ten years. Designers are able to fulfill any client’s wishes when developing individual radius sliding wardrobes. Consumer reviews of the radius sliding wardrobe are only positive.

For radius sliding wardrobes, the price is determined when ordering.

Factors influencing the cost of a radius sliding wardrobe:

size;
material from which the doors are made: glass, panel, chipboard, MDF, mirror, etc.;
frame: aluminum or steel;
manufacturer of guides and rails;
interior contents of the cabinet: number of shelves, drawers and baskets;
additional development of individual design.

Radius sliding wardrobe, cost from 130 $ to 200 $ - economy class, from 200 $ to 300 $ - standard, and from 350 $ to 1000 $ - radius sliding wardrobes of the elite class.

Accessories for radius sliding wardrobes

The doors of the radius sliding wardrobe move thanks to a special sliding mechanism. This process occurs almost silently. One of the components that is included in the sliding mechanism is a profile, which guarantees noiselessness. The profile in the radius wardrobe comes in two types:

aluminum,
steel.

It is preferable to choose an aluminum profile, which is more resistant to damage and does not create noise when the wheels slide. Although the price of an aluminum profile is higher than a steel one. The minimum thickness of the profile walls is 0.12 cm. The thicker the profile, the more reliable fastening sheet material. When choosing a profile, focus on the following manufacturers: Komandor, Raumplus, Absolut, Aristo and others. When installing a radius wardrobe with a height of more than 300 cm, the ideal option is Raumplus.

According to the type of sliding there are:

Suspended systems - the door is fixed from below and hangs on rollers. This system only has a top guide. Disadvantage suspension system is rapid wear and unreliability. Since the door is attached only to the top of the cabinet, the entire load goes to the cabinet.
The best option for a radius sliding wardrobe is a bottom sliding system. The door is attached and fixed on the top track, and slides along the bottom track. The load is distributed evenly, and the cabinet will last longer.

The door of the radius sliding wardrobe itself consists of the following elements:

Vertical side profiles - act as handles; they can be symmetrical or asymmetrical. When installing symmetrical side profiles, the door looks the same on both sides. Asymmetrical profiles divide the door into external and external sides.
Upper asymmetrical rollers – fix the door in the opening.
The upper door frame is used to install wheels and to fix the door in the upper profile.
The lower door frame is where the lower wheels are attached and ensures proper sliding of the door.
The internal filling of the door: mirror, glass, wood, etc. Serves as a decoration for the radius wardrobe and the entire interior as a whole.
Seal – attached to the vertical side profile. Function: softening the impact of the door on the cabinet wall. Protects the cabinet door from dust contamination.
Door plug – secures the side profiles.
Screws: adjusting and assembly - regulate sliding.
Positioner or stopper - allows you to fix closed door in a certain position.

For the manufacture of the roof, side walls and doors of the radius sliding wardrobe, chipboard is used, and for back wall 3 mm fiberboard is quite suitable.

Sliding wardrobes have radius dimensions. Rules for calculating cabinet capacity

The most simple option Calculating the dimensions of a radius sliding wardrobe is an online constructor. In a special program it is necessary to indicate the width, height and depth of the future cabinet. Next, select the number of doors, convex radius cabinet or concave radius cabinet. Type of material and filling for the door. Thus, we get a ready-made design for a radius sliding wardrobe.

Tips for designing a radius sliding wardrobe:

clearly define the space for installing the cabinet and the functional load;
the number of sections for clothes should be more than two. This makes it more convenient to arrange things according to the season;
if recessed lamps are needed, the cabinet roof must be brought forward 12-17 cm;
the recommended cabinet depth is at least 60 cm, for a convenient arrangement of all shelves;
door width from 50 cm. With a smaller width, the doors fall out of the guides;
do not make cabinet shelves more than 65 cm wide, as there is a risk that they will bend;
the distance between shelves is no more than 35 cm;

The appearance and strength of the cabinet depends on the thickness of the chipboard;
the number of compartments is equal to the number of doors;
provide drawers for storing things;
the width of all radius wardrobe doors must be the same;
You cannot design pull-out baskets opposite door frames. Because in that place the doors do not open. The baskets cannot be removed;
if possible, make a built-in or semi-built-in radius wardrobe;
a semi-built-in or built-in radius wardrobe merges with the walls and hides possible curvature, is cheaper, since less material consumption is required, and there is no gap between the walls of the cabinet and the wall where dust accumulates.

How to make a radius wardrobe

Let's consider the manufacture of a built-in radius sliding wardrobe. To do this, you need to measure the height of the ceiling and the width of the walls between which the cabinet will be located. Next, decide on the type of radius cabinet: convex, curved, wavy or concave. Design the cabinet, using a special program or manually. Prepare your tools for the job.

Tools for making radius sliding wardrobes:

pencil,
square,
drill,
screwdriver

Materials for the manufacture of a built-in radius sliding wardrobe:

drawings of the future cabinet,
furniture board 18 mm thick,
doors, pre-made or ordered,
internal contents: drawers, hangers, handles and guides,
accessories: wheels, profiles, guides, screws and dowels,
side, top and bottom trim panels.

Instructions for making a radius sliding wardrobe with your own hands:

Using a pencil and a level, we take measurements and draw the future location of the built-in wardrobe. On the wall we mark the place where it will be located vertical racks, and on the ceiling - profiles;
Mark the height at which the shelves will be fixed and drill a hole for the dowels. Using a hammer, hammer in the dowels;
Shelf profiles are attached to the wall. For reliability, install lower shelf holders;
Apply markings for installing the mezzanine shelf. Attach the shelf using self-tapping screws;
measure the distance from the ceiling to the floor where the side wall is installed and cut the part according to size;
start installing the side profile;

According to the cabinet drawing, install the filling for the radius sliding wardrobe: shelves, drawers and clothes hangers;
when the installation of the internal filling is completed, proceed to the installation of false panels;
false panels should be prepared in advance; their shape fully corresponds to the radius of the cabinet;
using a screwdriver, attach the false panels to the side wall, ceiling and floor;
cut and bend the lower and upper profile. When installing the lower profile, insert one positioner or stopper on each door;
attach the lower and upper profiles using screws to the false panel;
The cabinet door is made according to the radius of the profile fastening. It is better to entrust this matter to professionals;
if the door is not decorated, use self-adhesive film or other suitable material for decoration;
Attach vertical profiles to the sides of the door using screws. Install a silicone or rubber seal;
then secure the upper and lower door frames;
install the upper and lower rollers;
First insert the upper guide and then the lower guide rollers onto the rails;
check that the door slides correctly. Use a hex wrench to adjust the slide;
If desired, stick on pile to protect the doors from impacts.

The first sliding wardrobes with sliding doors were created with the sole purpose of increasing the free space in the premises. Today, the latest technologies in materials make it possible to fully integrate universal furniture into the interior and achieve a special harmony of style. So what role do the facades of sliding wardrobes play? This is visual expressiveness and practical solution. How to emphasize aesthetic perfection appearance a wardrobe with an impeccably organized storage system? Advice from Senator company specialists will help you choose the best option design from a wide range of furniture market offers.

Fronts for sliding wardrobes. Materials and decor.

Manifold modern materials for finishing the facades of sliding wardrobes allow you to create furniture with a unique design. When choosing decors and colors of sliding panels, pay attention to some criteria. The finishing option is selected taking into account:

location of the wardrobe;
geometry of sliding doors (straight-line, radius);
furniture silhouette (straight, corner, five-wall, combined type);
number of panels.

The designers of the Senator company recommend paying attention not only to the aesthetic component of the materials, but also to safety and resistance to external influences, since the requirements for furniture for children's rooms, bathrooms, hallways and utility rooms differ significantly from each other.

The facades of sliding wardrobes can be made of natural wood, veneer, chipboard, MDF, plastic, hardened, patterned and frosted glass, bamboo, rattan. Particularly original appearance of the panels can be achieved by combining several materials in a single door leaf, separated from each other by dividers. Inserts made of natural smooth and embossed leather emphasize characteristic style interior

Imitations various surfaces will support general idea room design. It is important to choose the right shades for the frame of the sliding wardrobe facades, which can take the form of horizontal and oblique dividers, edge material, steel or aluminum profiles.

Spectacular facades for stylish interiors.

The modern design of sliding wardrobe facades can amaze the imagination with the breadth of color and texture combinations. The decor, carefully selected with the help of Senator company professionals, will help:

focus on the sophistication or brutality of the style;
visually increase the depth of space;
enhance natural light due to the reflective ability of the surfaces of sliding panels.

Wardrobes.

The place dictates the conditions.

Sliding wardrobes fit perfectly into any room, help hide construction defects and maximally adjust the optical volume of space. However, in each specific case, you need to pay special attention to the location of their installation. Skillfully combining shades, textures, geometry of inserts from various materials on façade canvases, you can achieve amazing effects without expensive redevelopment.

Hallway

Spacious or narrow hallway corridor type is often characterized by a lack of lighting, so the logical solution would be to use wide-format, film-reinforced mirrors. They will help increase the intensity of the existing luminous flux, and also see yourself in full growth and appreciate the impeccability external image before going outside.

Bedroom.

When choosing optimal option When choosing a façade composition for a bedroom, you need to take into account the concept of the interior style and the range of shades. Everything here should contribute to a good rest. The comfort of the atmosphere is supported by a soft palette of pastel colors and natural high-quality materials.

Children's room

In children's rooms, it is important to use facades with safe, hygienic, easy-to-clean filling. Here it is better to give preference to economical chipboard in delicate colors or plastic panels in any combination.

Photo printing with images of your favorite cartoon characters or computer games will help emphasize the main idea of decorating a children's room. As the child grows up, you will simply need to replace the facades with panels with current decor that supports the teenager’s hobbies or a special style concept.

Bathroom

Happy owners of spacious bathrooms will be able to appreciate the convenience and appropriateness of a sliding wardrobe with stylish fronts made of moisture-resistant materials.

Combination of mirrors and plastic panels with glossy or matte surfaces in milky shades will go perfectly with snow-white earthenware sanitary products. Bright hues and reflective surfaces will help create an amazing effect of airiness and multidimensionality of space.

Living room.

When choosing decorative design facades to the living room, you need to take into account the style of the room, color scheme and panel area. There is no limit to imagination here. It is only important that the shades and texture of the cabinet door materials be combined with the palette of interior tones, accessories, and facades existing furniture and niches with dishes, with a built-in stereo system and TV.

Wardrobe rooms

Facades closed shelves dressing room matched to the tone of the cabinets or shelves. In rare cases, it may be a contrasting shade. As a rule, the panels have a laconic decor, created in the spirit of minimalism, or classic design, emphasized by ornate handles.

The best material would be solid wood. Its natural properties will help maintain a healthy atmosphere in a confined space.

When choosing the color scheme of the doors closing the entrance to the dressing room, the tone of the sliding panels is selected based on the principle of harmony with the shade of the walls. The material can be used as a mirror cloth or chipboard, finished with natural wood veneer.

Utility rooms and garages

Sliding wardrobes designed for storing tools, fishing tackle and accessories, sports equipment, bicycle and car wheels are always decorated in restrained, dark colors. In such cases, it is appropriate to opt for inexpensive economical options, made from chipboard in one piece or including special inserts with perforations for ventilation.

Facades in a kaleidoscope of finishing materials.

Successful development modern technologies affected the quantity and quality of materials for finishing the facades of sliding wardrobes. Today at the Senator company you can find an extensive collection of options for decorating the appearance of spacious furniture. Sliding panels can be in the form of solid panels from floor to ceiling or combined wide-format sashes with dividers.

Solid fabrics are:

Combined facades

Compartment doors with a carefully selected combination of materials are current offer for decorating a closet in any room. Integrity general view achieved by using horizontal and oblique dividing profiles. When developing the design of facades, an experienced specialist from the Senator company will always pay attention to the color of the dividers. They must be in perfect harmony with the overall color scheme sliding doors and ensure reliable fixation of sections.

An original idea that meets modern fashion trends, will be the use of carved baguettes made of MDF or natural wood. Such facades, decorated in a strict classical style, will emphasize the respectability of the environment and the nobility of elegant aesthetics.

The facades of the sliding wardrobe are the “face” of your furniture! Knowledge of the characteristics of materials and manufacturing features of panels with modern systems movement will help the professionals of the Senator company offer the best constructive and decorative solution for every room of your home. Entrust qualified specialists with the design of your façade composition and make sure the result is impeccable!

What do we do when we meet interesting new product before purchasing it? Right! We try to learn as much as possible using everything available funds. The first article dedicated to radial (radial) sliding wardrobes, was for informational purposes only. The purpose of this material is to cover this topic in more detail, touch on its technical side, and talk about the materials and accessories used in production. During the story, we will answer all the questions that were received from our visitors.

The most complex and expensive element radial (radial) furniture is a curved façade, or simply a system of sliding doors. In the process of its design there are no trifles; the slightest mistake can result in serious problems in operation. For the manufacture of sliding system We use reinforced aluminum profiles for sliding wardrobes. They were not chosen at all by chance. The fact is that the door filling is made from materials such as HDF, laminated paper, acrylic glass. All these sheet materials have a fairly high stiffness coefficient, which means that after giving them a radius shape, they will put pressure on the door profiles, trying to straighten and deform them. If the profile system is insufficiently strong, after some time the radius of the door will change and the furniture will become unsuitable for use: sliding doors will jam, swing doors will no longer flow smoothly into general shape furniture.

Sectional area anodized aluminum profiles, used by us, are much larger than in conventional systems, such as “Find” or “Aristo”: horizontal profile (curved) - 60x17mm, vertical profile (frame) - 60x32mm. Such a profile is guaranteed to withstand a given radius when filling the door with any sheet materials. As proof we will cite next example: a profile curved along a given radius can easily support the weight of an adult. In this case, there is a complete absence of any deformations.

The front part of the profile is decorated with inserts, the color scheme of which depends on the wishes of the Customer. The minimum radius of a swing door is 600 mm, a sliding door is 900 mm (recommended - 1200 or more). Despite the increased profile rigidity, the doors of this system are very light, which makes them injury-proof.

Our furniture uses a bottom-support sliding door system. The advantages of this solution are that the requirements for the ceiling slab (in the manufacture of built-in radial (radial) cabinet) and to load-bearing structures of the cabinet itself are minimal, unlike top-support systems. The weight of the doors is distributed along the length of the lower guides. In our opinion, this solution is much safer than hanging doors. The lower support system completely eliminates falls door leaves due to broken fasteners or broken guides.

I would like to touch upon such an important issue as the reliability of the sliding system and the noise level during operation of the cabinet. In our usual wardrobes, there are technological gaps relative to the upper rollers and their guides. As a consequence, we get increased level noise when operating compartment doors and some of their instability (slagging). IN radial (radial) sliding wardrobes this problem is being solved in the following way: The position of the upper guides is adjusted when assembling the cabinet parts, which minimizes the gap (the rollers are pressed tightly against the guides). In addition, the very design of radius doors makes them more rigid than conventional ones. This ensures increased smoothness of operation, no swaying of doors and reduced noise levels in the operation of the sliding mechanism.

In conclusion, I would like to highlight such points as dust and dirt resistance and the use of mirrors in filling doors. The vertical profiles of the system are framed with Schlegel ( brush seal). Its main task is to protect the contents of the cabinet from dust. The gap between the compartment doors when closed is no more than 10 mm. Taking into account the mandatory overlap of the doors, your belongings will be reliably protected. The use of mirrors and tinted glass in filling doors is in principle possible. But! Remember the fun room - the whole effect is based on the use of curved mirrors. Do you need such a room in your interior? Let me doubt it! As an option, you can use mirrored flat hinged or compartment sections, arranging them so as to obtain a harmonious flow from the radius to the line. As for glass, in our opinion, acrylic and various plastics are much safer, easier and more unpretentious to use.

I would like to hope that this material will help you find answers to your questions and decide on the choice of materials and components. If anything remains unclear, contact us by phone or using the sections

The production of radius compartment doors is a task for experienced craftsmen With necessary equipment and components. Here, almost every detail and nuance plays an important role, starting from the creation of the project, ending with the choice of materials and, directly, assembly. In addition, the design requires precise actions, full compliance of components and the most accurate functioning of all engineering elements. Therefore, it is better to purchase such structures in trusted places with positive reviews. This way you can protect yourself from low-quality analogues and fakes.

It is worth knowing about the features of various configurations of such products. For example, radius swing interior doors are assembled from quite standard materials:

Loops;
Accessories;
Door frame;
Cloths.

However, their use is not always advisable. In small spaces this will be inconvenient and impractical, so it is better to choose a coupe system. But it also has its subtleties. We will talk about them further.

Production of compartment doors with a radius shape

The production of radius coupe doors involves the use of more high-tech devices than in the previous case. So, steel or metal guide strips that are attached to the ceiling or floor are actively used here. Rollers are placed on the sashes themselves, which will then run along these slats. To install the canvas in a vertical position, use brackets that are fixed to the wall. This fastening method is quite reliable, but only if high-quality materials are chosen. It is worth noting that coupes are more practical and modern than traditional engineering solutions, which also significantly affects the choice of current users.

Practical benefits of compartment doors

The manufacture of radius compartment doors differs in shape and the mechanisms used. If you install such a device in your room, you will not need to think about saving space. After all, when opened, these doors move in different directions and take up no space at all. Therefore, the entrance can be located almost anywhere. Take into account only the bending of the structure itself. The canvas will protrude slightly from the box. But, as practice shows, this protrusion has virtually no effect on ease of use, but it perfectly improves the aesthetics of the interior when minimum costs money and time.

Sections