Kiturami turbo gas boiler 30 lng. Review of Kiturami diesel boilers - technical characteristics

  • High efficiency thanks to 3-PASS design
  • Low noise boiler
  • DHW heat exchanger from of stainless steel
  • Stable hot water in large volumes
  • Built-in turbocyclone burner
  • Compact and easy installation

Safety, convenience and satisfaction of all customer needs are the main goal of KITURAMI for 40 years!

To increase the efficiency of Kiturami (KITURAMI) TURBO boilers, a design for multiple passage of combustion products inside the heat exchanger is used.

The KITURAMI TURBO boiler has the functions “Absence”, “Shower”, “Sleep”, which can significantly reduce fuel consumption. And also the availability safety devices like a sensor low level water, overheating and other devices will ensure complete safety when using the boiler.

The design of multiple passage of combustion products inside the heat exchanger increases efficiency and also reduces the level of acoustic noise.

Thanks to the stainless steel DHW heat exchanger, scale is prevented and clean hot water is provided.


The turbocyclone burner achieves the highest combustion efficiency thanks to a special plate (FCH₂) heated to 800°C, thus reducing fuel consumption.

The capacitive heat exchanger of the heating circuit of the Kiturami TURBO boiler allows you to almost instantly obtain hot water from the DHW circuit.

The Kiturami boiler (KITURAMI) TURBO does not require much space for installation and is also easy to transport.

Kiturami Turbo boiler model

13R

17R

21R

30R

Heating/DHW power

Average diesel fuel consumption for the heating season

Performance hot water

dT=25°С

dT=40°С

Heat exchanger area

Heat exchanger capacity

Pipe diameter

heating inlet/outlet

DHW input/output

chimney

Width

Length

Height

Weight

Electrical consumption energy

Create a stable and comfortable microclimate in the house in winter with minimal costs, and a highly efficient and multifunctional diesel boiler model will help to set up a hot water system KituramiTURBO-30R (35 kW). The unit in question is designed for floor mounting, has modern technological controls and ideally serves in the Russian climate.

Features and advantages of Kiturami diesel boilers:

  • Economical - the Kiturami turbo diesel boiler is one of the most economical boilers presented on the market. Russian market. It is difficult to find a diesel boiler that would consume 8 liters of fuel on average per day. The turbocyclone burner installed on this heating boiler allows you to achieve the highest fuel efficiency due to the aerodynamic flow in the combustion zone. This technology increases the boiler efficiency;
  • Safety and reliability – Sensors for monitoring temperature, overheating, and lack of coolant provide an optimal control system;
  • Self-diagnosis system - displays all information about the operation of the boiler and malfunctions on the display room thermostat, clearly showing the state of the system;
  • Ease of operation - all boiler control functions are set from the control panel, which can be installed in any convenient place. The thermostat built into the remote control allows you to regulate the operation of the boiler according to room temperature and coolant. The boilers provide the possibility of degree-by-degree adjustment of hot water temperature in the range from 41 °C to 75 °C. The turbocharging effect promotes the forced removal of exhaust gases into the chimney, which eliminates dependence on the presence of draft and the size of the chimney;
  • Switching to another type of fuel is achieved by replacing the burner;
  • Hot water supply all year round, including in summer period. It is possible to use the boiler without using the heating mode. The boiler type of boiler allows you to produce a sufficient amount of hot water, so DHW does not require the installation of additional equipment.

Diesel boilers Kiturami are necessarily economical and modern devices with the latest equipment, created specifically for service in the territory of houses and cottages, where there is a need for organizing efficient heating, as well as DHW systems. The boilers are made of high-quality reliable materials, protected from corrosion and characterized by minimal noise.

Kiturami Turbo 30R is one of the models of floor-standing boilers, the main purpose of which is heating and hot water supply for both residential and industrial premises.

The described model carries out its work due to diesel fuel, therefore, such boilers are considered the most suitable for heating and hot water supply. The heat exchanger is made on the basis of such a high-strength metal as steel. But this is not the main thing in which this model is superior to others.

The main advantages of the Kiturami TURBO 30R boiler

  • Economical. The Kiturami Turbo 30R diesel boiler is very economical, due to the fact that eight liters are enough for daily fuel consumption. Also, high efficiency is achieved due to the turbocyclone burner installed in the boiler. Thanks to it, maximum fuel efficiency is achieved, this is due to the aerodynamic flow in the area where combustion occurs. This technology increases the efficiency of the boiler;
  • Safety and reliability. The boiler design has special sensors that monitor temperature and overheating. Thus, the developers have fully provided the required control system;
  • Equipped with a self-diagnosis system. During operation, the consumer will not need to regularly check the equipment, since the system itself will indicate defects and malfunctions that have arisen. You will learn about any operating errors through the built-in display. This way you will always be aware of the condition of the boiler;
  • Ease of use. The boiler comes with a remote control. Using it, you can set all the necessary functions, no matter where you are (within the permissible distance). The remote control has a built-in thermostat, which allows you to adjust the operation of the boiler according to the room temperature.
  • It is possible to switch to another type of fuel. This requires replacing the burner;
  • Availability of hot water even during the non-heating season (summer). Due to the fact that the boiler is a boiler, it is capable of producing the required amount of hot water. That is, for DHW there is no need for additional installations.

The technical characteristics of this boiler model include:

  • power 34.8 kW;
  • volume of fuel consumed 4.3 liters per hour;
  • The area allowed for heating is 350 square meters.

Diesel Kiturami boilers Turbo 30R is one of the most economical and modern devices. Latest equipment allows you to effectively and without extra costs use them as the main unit for heating and obtaining hot water. When creating the Kiturami boiler, the developers took care of the reliability and durability of the equipment, including high-quality materials that perfectly protect it from the effects of corrosive processes. Do you want to find equipment for long-term and efficient heating of your home? Kiturami Turbo 30R – the most best option, combining unsurpassed quality, safety and long service life.

I was looking for a used backup diesel boiler. My main heating is powered by electricity and a fireplace with a water jacket, Optima Aqua 700Sh. Diesel is needed to support the TA in severe frosts and in case of a power outage (connected via a Smart UPS 3000VA).

There are few offers on the secondary market, starting from 15 tr. (at a new price of 30 tr.), but occasionally there are offers for 10 tr. Most often, happy homeowners who have gas supplied to them get rid of diesel boilers. Therefore, the condition of the boilers is quite good, they worked for 1-2 seasons.

And then one day a Kiturami Turbo 30R (35 kW) turned up for me for 7 thousand rubles. I examined it and bought it. I brought it home, connected it to the CO, installed a 200 liter plastic fuel barrel, replaced the fuel filters and 1 fuel line hose.

The boiler began to show error 01 upon startup. Error 01 means that there is no fuel ignition. I scoured the internet and formulated “troubleshooting”, i.e. ways to solve this problem step by step:

  1. We check the voltage in the network. The voltage should be standard 220-230 V ().
  2. Checking the fuel line. There should be no air leaks in the fuel supply to the boiler fuel pump.
  3. Checking the fuel filter. The fuel filter may become clogged, making it difficult to supply fuel in the proper amount. If clogged, replace the fuel filter.
  4. We check that the fuel does not flow by gravity (relevant for boilers 21R, 30R).
  5. Maybe poor quality fuel. Change the fuel, or try closing the air damper and feeding a richer mixture. The damper is located on the left side of the burner (see diagrams below).
  6. We check the flame control sensor (photocell). The sensor can be pulled out of the burner body by turning it along its axis (see diagrams below). Wipe clean with a dry cloth, protective cover the end should be perfectly transparent. If the front cover is removed, the photocell may react to extraneous light and generate an error.
  7. We check, clean (or change) the nozzle and ignition electrodes. They can be reached by removing the entire burner from the combustion chamber flange (see diagrams below).
  8. We check the operation of the ignition transformer. It should give a spark to the ignition electrodes (I don’t know how to check the spark, I haven’t reached this stage of troubleshooting).
Burner diagrams for Kiturami Turbo 13R, 17R diesel boilers:

Burner diagrams for Kiturami Turbo 21R, 30R diesel boilers:

I stopped at stage 5. He covered the air damper with his hand and the boiler started. Obviously, the turbine simply blew diesel fuel into the combustion chamber with such force that the electrodes simply could not ignite it. After the boiler stopped with error 01, excess fuel leaked through the burner flange. Using a scientific method, I adjusted this damper so that the boiler would start at the next cycle without error.

The problem that I have not yet been able to overcome is condensation in the chimney. During a cold start there was so much of it that a large puddle flowed onto the floor. It flowed through the chimney condensate drain and through the elbow that comes from the boiler.

You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.

Check with the manager for exact delivery times!

Pickup points

Delivery cost in Moscow and the Moscow region:

  • Within the Moscow Ring Road - from 0 to 500 rubles, (in the product card it is indicated individual cost delivery)
  • Outside the Moscow Ring Road up to 10 km - 700 rubles,
  • Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
  • To the regions, delivery by a transport company (calculated individually).

Delivery cost for

km from MKAD

700 rub.

Unloading of large-sized goods is carried out by the efforts and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.

Payment by bank card to the courier upon receipt

Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).

Payment by credit card on the website

To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:


After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.

Our details

    Limited Liability Company "Teplovod-Service"

    OGRN: 1105003006162

    Taxpayer Identification Number: 5003088884

    checkpoint: 500301001

    BIC: 044525225

    Bank: PJSC “Sberbank of Russia”

    R/s: 40702810838060011732

    S/s: 30101810400000000225

    Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., office B-6

Special conditions

    For goods with the status "To order" worth up to RUB 100,000. no prepayment required.

    For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.

  • For any product sent by a transport company, 100% payment is required.