DIY wardrobe for clothes. Do-it-yourself dressing room - drawings and diagrams, layout, how to make compartment doors

home

CCTV

Problem large quantity clothes and shoes is solved by creating a dressing room. The advantage of the room is the convenient arrangement of things that will take up minimal space. Therefore, a do-it-yourself dressing room - good way redevelopment of a home, and not necessarily with a large area.

Room requirements

Before arranging the premises, think over the project. To create a dressing room with your own hands, drawings, diagrams and photographs should give a complete picture of the redevelopment. Take the time to study the information, pictures and photos from various projects. Then get started directly:

Draw shelving and cabinets on the project or diagram.
The drawing helps to calculate the dimensions of the structure and the ability of a person to move freely or change clothes.

Note! Consider Various types dressing rooms. Based on the dimensions of the room, choose the appropriate option.

A room for storing clothes and shoes is equipped taking into account different requirements to ventilation, lighting, area.

Ventilation

To avoid musty smell provide natural or artificial air exchange. For ventilation there must be windows or a special hole in the wall.

Lighting

The sun's rays act on clothing, lightening the fabric. Refuse the natural light source, giving preference to lamps, lighting, sconces.

Dimensions

A room that is too cramped will become uncomfortable. The dressing room must be at least 1 meter wide and 1.5 meters long. The total area must be at least 2 meters.

Where to place the dressing room

For a dressing room, choose part of the room or small room. A common solution is a dressing room from the pantry. It is possible to combine the bathroom, and the freed meters are allocated to the room.

In the hallway or spacious bedroom, part of the area is enclosed with plasterboard. The advantage of such an adjacent room is that family members can easily change clothes. Another advantage is the absence of daylight, which causes clothes to fade. The linear layout involves closed drawers for socks, gloves, and underwear.

Corner option

A corner dressing room is unable to fully satisfy the needs of the owners. The design takes up little space in any room and consists of racks with shelves and a rod for hanging clothes. Close it with a sliding door or doors. The ergonomic solution can also be used to arrange a cabinet or rack with shelves in the corner.

Even a beginner can do a corner dressing room made of plasterboard home handyman. When creating a structure, a lot of construction waste is not generated. A plasterboard partition is easy to decorate special elements for corner products. In the finished space, shelves are distributed on both sides of the dressing room.

Important! When arranging shelves on only one side, space is wasted.

A detail in the form of a spiral that will connect the shelves, smooth out the corners and expand the space for things. Do not close the racks with doors. Free access will make it easier to choose clothes. Choose an interior accordion door with a lightweight design.

The design opens in one motion.
The canvas folds, freeing up space for fitting.

L-shaped walk-in closet

If you use one wall along its entire width, and a part of the other, you will get a structure that resembles a corner one. Depending on the area, the arrangement option is chosen. A small children's room can be an example where corner and L-shaped wardrobes are used.

U-shaped layout

Elongated rooms are suitable for a U-shaped dressing room. The borrowed version from the Italians took root in Russia. A square room is arranged on three sides, placing various options storage of things.

Parallel placement

In some cases, two opposite sides are used in the room, placing components for clothes and shoes. This option is convenient for walk-through rooms or wide corridors.

To save space, leave shelves open or use movable partitions.

Drawing up a diagram and drawing

Now that you have an idea of your dressing room, try drawing your own design on paper. A schematic drawing will help you understand how the cabinets will be arranged.

The next stage is the drawing. Show the future room to scale. It is the sketch that will help you understand how much materials you need to buy.

Arranging a dressing room

Install built-in wardrobes in the room. Compared to free-standing pieces of furniture, they will cost less and save space. Inside the structures, place various systems for storing ties, trousers, scarves and scarves, bags, shoes, and hats. Screw clothes hangers into the wall.

Room styles

Arranging a dressing room with your own hands is a creative process. The style can match the interior of the rest of the rooms or be the only one in the home:

Loft is embodied by using metal constructions: racks, glass or chrome shelves. The furnishings of the room are restrained or even “cold”, but simple.
The minimalist style of the project includes wood-look cabinets with glass shelves. Light colors furnishings will make the dressing room light.
The boiserie style, borrowed from Ancient Egypt, involves a more subtle approach to creating a room. Beautiful wood panels are attached directly to the wall sheathing and can withstand significant loads. The wall structure requires a spacious room. The room has good ventilation and is cozy.
A cabinet wardrobe requires the contractor to install modules. There are possibilities for various accommodation options. Manufacturers have even provided sections for storing belts and jewelry. The option is good because of the opportunity to order a certain quantity and types of cabinet furniture, and according to your own dimensions. The designer allows you to bring any project to life.

Note! If you are thinking about options for how to make a dressing room from a storage room in an apartment , choose a minimalist style to save space in an already small room.

Estimate and purchase of finishing materials

Developing an estimate will become the basis for purchasing components. Along with a list of building materials and fittings, purchase everything you need for your dressing room.

Visit several retail outlets to choose high-quality and inexpensive Decoration Materials. Even if they demand that you deviate from the style of the project, don’t worry. Products selected to your taste will bring pleasure when making a dressing room - after all, you are making it for yourself.

Step-by-step instructions for creating a wardrobe from a closet

A do-it-yourself dressing room from a storage room can satisfy the needs of a family of three:

Clear the room of things.
Finish the walls in the room. Use wallpaper or paint for repairs.
Determine the dimensions of the room.
Plan areas for racks and shelves - make a sketch of the future room.
Plan the progress of work on assembling the structure.
Calculate the amount of building materials needed and buy them.
Install the components in accordance with the drawing and project.

A properly planned dressing room consists of two zones, which can be located opposite each other:

In one they hang clothes, and below they store shoes.
On the other side they place linen on the shelves, small items, hats.

When installing, you will need putty, primer and paint for finishing. To create a frame - metallic profile sizes from 50 to 90 mm, drywall, fastenings, screwdriver. If desired, drywall is replaced with MDF or chipboard.

Creating a design

Mark the profile and cut the parts for the future frame. For organized work, assemble the structure according to the plan. Use a screwdriver and self-tapping screws to secure the floor profiles. Vertical elements are mounted on the wall, and horizontal elements on the ceiling.

Additional Information! Pay attention to the transverse profiles, which will make the structure strong and reliable - carefully secure with self-tapping screws.

Cover the frame with plasterboard in two layers. If necessary, stitch with insulation. The material will provide good sound insulation to the room. Swipe electric installation work for dressing room lighting.

The final step in creating your own wardrobe will be sealing the seams. Cover them with bandage tape. Then putty and prime, allowing time for each layer to dry. If desired, paint over the frame.

Be careful not to damage the walls. Also follow safety precautions to avoid injury.

Filling the room

A schematic division into zones will help place clothes, accessories and shoes so that they are at hand. Let there be outerwear in one place. Hangers with it are located on the rods:

For trousers, shirts, jackets, skirts, the height of the cabinet is 0.7-1 meter.
For long clothes, allocate a space of 1.5 meters.

For shoes, select shelves at the bottom of the racks, and at the top for hats. Make sure you have space for bags.

Important! Some items require ironing. Provide space for an iron, steamer and ironing board with a clothes dryer.

Reading time: 15 minutes. Views 1.6k.

The need for rational placement of things in small spaces does not lose relevance from year to year. Furniture designers are working tirelessly to create new ergonomic storage systems. As a result of their efforts, bulky cabinets are replaced by a comfortable, meticulously thought-out and spacious dressing room - you can equip it with your own hands in the pantry, under the stairs, in the hallway or bedroom. Having decided on the layout, completing basic drawings and calculations, you can begin preparing suitable materials. In addition, you will need to think through many nuances: from wall decoration to lighting. Ready-made design projects They will help you arrange the room competently, making the most of the usable space.

Features of arrangement in different rooms

The minimum room area for a wardrobe system is 2 m². This space is enough for a comfortable arrangement of hangers, shelves, and drawers. The optimal humidity level is 30–60% in summer and 30–45% in cold weather. The room is equipped with forced ventilation to prevent the appearance of mustiness, mold, and unpleasant odors.

Unfortunately, there is not always space in an apartment or house for a separate wardrobe system. In such cases, it is necessary to equip it in the most suitable premises:

Bedroom. Mobile hangers are usually used, open shelves, glass partitions, doors are replaced with curtains or screens. Advantages: convenience, all things are at arm's length. Disadvantages: the design can cause difficulties during installation, the impossibility of arrangement in small rooms.
Pantry. Suitable for creating a separate full-fledged dressing room. Manufacturing a storage system allows you to use all the usable space, install shelves, racks, racks, mirrors. Advantages: ability to accommodate a large number of things, ease of creation with your own hands. Cons: small passage, inconvenience when trying on clothes.
Hallway. A good solution would be to install a built-in structure; open, closed, and combined systems are acceptable. Advantages: the dressing room replaces bulky wardrobes and chests of drawers, the ability to store outerwear and other things. Disadvantages: suitable only for spacious rooms, complexity of construction.
Attic. The layout depends on the shape of the room. If the ceiling is at an angle, the racks are mounted along the highest or lowest wall. Advantages: large area, convenient storage and access to things, ease of arrangement. Disadvantages: you always have to go to the top floor to change clothes.

In private homes, space under the stairs is often allocated for a wardrobe system. Among the advantages of such a solution are savings on the purchase of furniture and the ability to use useful space. Disadvantages include limited space and difficulties with independent production.

Bedroom
Pantry Hallway Attic
Under the stairs

Selecting a layout

The design of the wardrobe system must fully comply with the parameters of the room. The location of the door, windows, as well as the geometry of the room must be taken into account. Among the most common varieties:

Linear dressing room. The simplest project is when the furniture is lined up along a blank wall or around a doorway. The entrance can be created using an accordion door, which does not require much space to open. For comfortable use, the depth of the dressing room should be at least 1.5 m. Advantages: ease of installation, spaciousness. Disadvantages: not very comfortable arrangement of things.
Parallel dressing room. Storage systems are located opposite each other, so a suitable space should have a width of 1.6 m or more. This option is relevant for elongated rooms in which the window is opposite the door. The racks should be placed at a distance of 80 cm. Advantages: a large number of storage spaces. Disadvantages: not suitable for walk-through rooms.
U-shaped. Convenient for decorating spacious dressing rooms. The layout is ideal for long rooms. Advantages: excellent capacity, ability to use any storage systems. Disadvantages: not suitable for small spaces.
Corner. Allows rational use of rooms with limited area: children's rooms, bedrooms, attics, hallways. Thanks to the right angle arrangement, it is possible to place twice as many things on the shelves compared to the linear option. Advantages: spaciousness, filling areas that are often empty. Disadvantages: due to the small size, changing clothes will be inconvenient.

To make your dressing room comfortable and ergonomic with your own hands, you need to correctly arrange storage systems. Suitable layout selected based on the individual parameters of the room, its geometry and other features. As a standard, the minimum passage width should be from 80 to 100 cm.

How smaller area dressing room, the more open compartments and hangers it should have.

Linear dressing room

Parallel dressing room

U-shaped Corner

Materials

The furnishings for the dressing room can be purchased ready-made. You must first measure the room so that the set fits perfectly into the available space. The following factory designs are popular:

Modular wardrobe systems. Pros: ease of use, affordable cost, attractive design, which looks especially cozy in home interiors. Cons: you cannot change the location and height of the shelves.
Metal and mesh systems. Pros: the racks allow air to pass freely, the shelves can be rearranged, the materials are not susceptible to moisture. Cons: high cost, there are no limiters between the compartments, which can lead to things falling out.

Entrance area

The minimum width of the entrance opening should be 80 cm. Sliding doors, sliding systems or curtains are used to decorate the entrance to the dressing room. When choosing, you must take into account the features of each option:

Sliding doors. The products move along the wall, so they do not require additional space and help save space. Advantages: no thresholds, which looks aesthetically pleasing, safe to use, comfortable. Disadvantages: low heat and sound insulation, high maintenance requirements, difficult installation.
Sliding systems. Depending on the mechanisms used, there are folding, sliding, louvered, and techno-structures. Advantages: saving space, effective addition to the interior, ease of use, easy installation. Disadvantages: noise when moving the sashes, lack of tightness, high maintenance requirements, short service life.
Curtains. In some cases, the use of fabric curtains is the most practical and convenient. Advantages: lightweight material, does not take up much space, quick installation, interior decoration. Disadvantages: ability to allow dust to pass through, the need for frequent washing and ironing.

A small dressing room will become visually larger when using mirrored doors. This technique will help evaluate appearance after trying on things, if there is no space in the room for other reflective surfaces. Fabric options that match the color of the wall decoration perfectly camouflage niches.

Sliding doors

Sliding systems

Curtains

Mirrored sliding doors

Lighting

The question of how to properly organize lighting in a dressing room remains relevant. Experts recommend choosing lamps with a spectrum closest to natural sunlight. Optimal power is 10–20 W.

Halogen, fluorescent, and LED lamps are suitable for dressing rooms. Overhead light is provided by compact spotlights. Long chandeliers with hanging elements are not suitable for dressing rooms, as they will interfere when trying on things. Mirrors, drawers and shelves, which are used most often, need additional lighting.

Stages of work

Decorating a dressing room with your own hands begins with creating a project and preparing for the work process. The following tools and consumables will be required:

Screwdriver Set;
drill;
screws, dowels;
hammer;
building level;
roulette;
Wall panels;
guides and rack profiles;
plasterboard (moisture-resistant) with a thickness of 12 to 15 mm;
mineral wool to create a frame;
putty;
mounting grid;
wallpaper or paint compositions;
wires for electrical wiring;
lamps;
switches, sockets.

The main elements for equipping the dressing rooms are being prepared: shelving, mirrors, drawers, rods. Suitable fittings are selected for sashes and storage systems. The work process consists of finishing the room and installing structures.

Tools

Preparing the premises

In an open dressing room, it is necessary to treat the walls against fungus. To do this, use a construction antiseptic or folk remedies: solutions of bleach, soda, vinegar. The best option The finish will be washable wallpaper. At this stage, it is necessary to carry out electrical wiring and arrange lighting equipment.

TO floor covering The dressing room has special requirements: aesthetics, resistance to deformation, durability, hygiene. They correspond to laminate, linoleum, wooden plank. Cold tiles and porcelain stoneware are not suitable, as well as expensive parquet, the use of which is inappropriate in this case.

The entrance to the dressing room can be open or closed. Modern options are sliding structures, portable curtains and partitions that harmonize with the overall design of the room. For classic interior traditional is optimal wooden door, for the minimalist - a lightweight, almost invisible model. Arches look original, but when using them, things must be kept in perfect order.

The question of how to make a dressing room in a limited space is relevant for owners of city apartments. The optimal solution would be open storage systems, as well as division into zones or tiers:

Lower. Provides a width of 20–30 cm, located at a distance of 60 to 80 cm from the floor. Used for storing shoes, household appliances, accessories.
Average. Fits at a height of 60 to 200 cm. The middle level is the most easily accessible, so clothes that are worn most often are stored here.
Upper. Occupies a space of 180–200 cm and above, used for placing travel bags, suitcases, and out-of-season items that are rarely used.

A small room will be visually enlarged by light finishes, reflective and glossy surfaces . As a result of this decision, the boundaries of the room will “move a little” and the room will be filled with light. To expand the space, transparent doors and lighting built into the shelves are also used.

Popular are oval, trapezoidal, and rectangular mirrors, which are placed horizontally on opposite walls of the dressing room, above a table or cabinet. Floor options that reflect a person in full height are decorated with beautiful frames. For creating original design reflective surfaces are used to decorate the ceiling or floor. Placing them in door panels will help save space.

To figure out how to make a dressing room yourself, you need to choose a layout, create a project that matches the parameters of the room and the needs of users. The room will become more comfortable and attractive with a well-organized lighting system, a selection of suitable storage structures, and the use of quality materials. To create a dressing room with your own hands, beginners should take advantage of master classes, ready-made diagrams, step-by-step instructions.

Video

Agree, it’s quite convenient when all things are placed in one place. There is no need to run around the apartment looking for individual items; everything can be seen and tried on in one place. You can arrange it even in a small area. A rationally arranged dressing room with your own hands (drawings, diagrams and photos will be presented below) will serve you well for many years.

Our comfort depends on a properly organized storage system. Agree, when every thing is in its place, it is easy to find. The main rule is space and convenience. But in small apartments this is difficult to achieve. Modern technologies come to the rescue, thanks to which modern ones are reduced in size; miniature flash drives have replaced books. All this frees up additional space.

Before you plan a permanent storage system, you need to sort your things. Items that we have not used for a long time can be disposed of or sold, and for the rest we can choose the optimal dressing room.

Storage rules divide things into two rotations.

Hot– items of daily or frequent use. It's not just clothes. This includes boxes of shoes. The size of the storage area depends on their dimensions;
cold These are items of seasonal or rare use. For example, travel bags, household items.

Installing a separate wardrobe is much more practical than purchasing one. It is made to order, which allows for the most efficient use of all space with ideal filling. You can install a dressing room with your own hands according to ready-made drawings and diagrams. Photo selections on the Internet will help you make your choice.

DIY dressing room drawings, diagrams, photos

After determining the basic parameters, it is necessary to complete a drawing and layout diagram. It will help determine the location of all structures as accurately as possible. The main parameter when drawing up a plan is the area. It is she who determines the filling of the dressing room.

Minimum sizes should start from 4 sq.m. First you need to determine the installation location. You can allocate a separate room for this. However, not everyone has this opportunity. A small dressing room from a closet in small apartments is an ideal option.

To install a dressing room, it is enough to arrange it in any room. As clear example you can contact ready-made solutions dressing rooms in photo catalogs and choose your ideal dressing room.

Corner dressing rooms in the hallway

As we determined, the placement will make the most efficient use of the corner of the room. It is enough to allocate an island of 2 square meters for the dressing room. Photo interesting projects posted in our catalogue.

The partition can be done. This arrangement provides sufficient volume in a minimal area. Drywall is easy to use, the design is lightweight, and there is virtually no debris after installation.

Internal filling can be done in two ways.

All structures are lined up along one wall surface;
the filling is installed harmoniously along both walls. This is a more preferable location as the space is used more efficiently.

Designers offer several options for corner elements, which ensure maximum ergonomics small space. The installation of a spiral lintel will help increase the space and smooth out the sharp corners of the dressing room.

Advice! It is better to leave shelves in storage systems open.

In the design of a dressing room in the hallway, it is necessary to provide an entrance with a maximum width. As an option, a device that will allow you to open as much as possible and combine the storage area with the common space in one motion.

Linear layout is a simple and accessible design. The structures are built along the wall surface. This arrangement is more like a niche. The entrance can be made using an accordion door, which can easily slide to the side, revealing a small world in front of you.

Using retractable hangers will allow you to bring your clothes closer with one movement of your hand. For a comfortable location, the dressing room is planned to be at least 1.5 m deep. It is better not to install partitions; they will take up useful space without adding any functionality.

Racks are also used for corner systems. Ready-made ideas for wardrobe room designs can be viewed in galleries on the Internet.

Parallel type

To create parallel placement, you only need to arrange and fill the room with furniture along parallel walls. However, not all premises are suitable for this type. For example, for walk-through rooms this is an ideal option. A completely different matter is a blind room, for which it would be more practical to place a U-shaped dressing room.

For a comfortable location, the parallel dressing room must have a width of at least 1.6 m, otherwise it will be very difficult to stay there. The racks should be located at a distance of at least 80 centimeters.

Filling can be done with end hangers and retractable panels.

L-shaped walk-in closets

This arrangement does not require partitions. It can be made an integral extension of the room. Systems in the form of shelving increase the area of the room.

Since the main cost of installing a storage system falls on the design of the partition, the L-shaped system allows you to significantly save money on the dressing room.

U-shaped wardrobes

The U-shaped system is arranged both in large and in small space. This is a separate kingdom of the owners. You can install all the elements of dressing rooms in it: closed drawers, separate sections and shelving.

Arranging a U-shaped system allows the designer to show maximum creativity when filling the space. At the same time, the main task is to create a room with maximum space. For such a system, a narrow and long room is best suited.

To fill the dressing room, the upper shelves are made wider so that rarely used items can be placed there, such as travel bags or large boxes.

Dressing room in the bedroom

The installation of a dressing room is the most successful location of the storage system. If the area allows for the installation of one of the structures, you can safely begin to implement the project. Moreover, it is quite possible to do it yourself.

For a large area, a U-shaped design can be called ideal. It will unload the room as much as possible, while leaving enough space to move around.

An interesting solution would be to install a dressing room. Partitions can be made in the form sliding structures or permanently.

If the bedroom area is very small, there is no need to be upset. He will come to the rescue. To place it you will need only about 1 meter of the width of the room. Properly selected filling will allow you to place all your household items in it.

For narrow spaces, a corner dressing room in the bedroom is suitable. Photos of designs are selected according to the overall design.

A parallel storage system is suitable for a walk-through room. You can make preliminary drawings and visualize the final design.

Construction of a storage room in a Khrushchev-era dressing room, layout with dimensions

Architects of the last century, when designing mass development areas, included a small storage room in small-sized apartments. Designers suggest converting it into a small dressing room. This is the most good option to arrange an entire room for storing things.

The placement of the pantry in the Khrushchev house was carried out with an entrance along the long side of the common room or an end entrance. Let's consider both options for reorganizing storage rooms.

Placing the entrance along the long side of the room

Before filling the pantry, the old arrangement should be dismantled. To increase the width of the pantry, you can move the wall structure deeper into the room.

You should know! For transfer load-bearing structures it is necessary to complete the project and coordinate it with the architecture of the area. Unauthorized redevelopment is not allowed!

A U-shaped or linear structure is placed on the enlarged area. A useful option would be to place a two-layer structure. Racks or shelves for open storage are attached to a long wall surface. In front of them is a hanging bar. In order to take things from the shelf, you just need to move them apart.

Placing the entrance at the end of the room

It is impossible to move structures with this placement. In this case, the choice of location system must be made based on the parameters of the pantry. If the width of the room is up to 1300 mm, you can arrange an L-shaped system. By narrow side set open. Along the long side there is a rack with hangers and drawers for storing shoes.

For a narrower space, a roll-out hanger is an excellent solution. Open shelves for storage are rarely placed on the end surface of the room.

used things. The hanger rolls out into the common room.

You can find interesting option making your own dressing room from a closet in photo catalogs and master classes on the Internet.

Proper dressing room lighting

Good is important for the whole house and especially for the dressing room. It is advisable if the storage system is organized with a window. But, unfortunately, such placement is not always possible. Let's consider alternative lighting options to natural lighting. It is important to choose lamps with warm lighting.

Photo	Description
	– with its help, the lighting of the room is maximum. In addition, it creates the illusion of a small boudoir. You can choose an exquisite chandelier made of dark glass or crystal.
	To create accents, halogen spotlights or LED bulbs are installed on the ceiling. The design and shapes allow you to choose them for any room interior. In addition, you can change the direction of the light emission as needed. Furniture spotlights are installed both on the canopy of the shelves and inside the surfaces, turning on when the dressing room or closet is opened.
	It can be fixed along the perimeter of the ceiling. It will effectively highlight all the hard-to-reach objects in the room. The tape installed under the shelves will give the appearance of a floating structure.
	The lamp in the form of a sconce can be installed near the wall.

This is interesting! Furniture in small dressing rooms can be made with glossy surfaces that will reflect radiation and create the illusion of volume.

Requirements for dressing room ventilation

The storage system requires sufficient ventilation. It’s good if there is a window in the dressing room. However, it is not always convenient to keep it open. You can leave the doors open. But, as practice shows, this is also not always convenient. In this case, the solution would be a natural or forced ventilation device. This work must be entrusted to specialists who will select equipment taking into account the area of the room.

It will not only properly get rid of unpleasant storage odors, but will also protect against the occurrence of fungus or mold.

Doors for dressing room

Doors to the dressing room must be selected based on the overall style of the room. The design must be comfortable and reliable, because it will be used several times a day. Manufacturers offer a wide range of products, the choice of which can lead to a dead end.

Each storage system has its own recommendations for choosing doors.

Swing

To install them, free space is required along the opening direction. According to the rules fire safety doors should open into the common room.

Sliding

This design is suitable for small rooms. They do not require additional space. Door leaves move freely along horizontal guides. The structures are quite easy to install with your own hands. Photos of wardrobe systems are posted in the catalog at the end of our review.

Designs in the form of a book or accordion

In the first case, one part of the mechanism is fixed to the box, while the second moves on rollers. The system is in the form of an accordion or consists of several canvases interconnected by loops.

Sliding doors

The blades move on rollers along guides. One canvas is enough for a storage room.

Pencil doors

This is the most a complex system. The canvas is hidden in a plasterboard box or in a wall surface. Externally they look very beautiful and unusual.

Filling the dressing room

Manufacturers offer a wide range of fillings for cabinets and dressing rooms. After all, from correct placement depends not only on the comfortable search for the necessary items, but also on the service life. Therefore, it is important to rationally approach the internal content of the storage system.

Clothing storage systems

The middle compartment is selected for clothes. For placement on hangers, it is necessary to provide a height of up to 100 cm for shirts and about 170 cm for dresses and outerwear. Placement can be on rods and pantographs.

Small items are placed on shelves or in drawers.

Shoe storage systems

A lower compartment with a height of no more than 80 cm is allocated. Additionally, you can install horizontal or slightly inclined shelves. It will be convenient to install retractable structures, the height of which should be at least 30 centimeters for summer shoes and at least 45 centimeters for winter ones.

Related article:

In the publication of our portal you will find out what they are, what types they can be, and whether it is possible to install such structures in small apartments or they need a separate room.

Description of designs

At proper storage clothing and household items, we extend their service life. Let's take a closer look at manufacturers' proposals for rational use dressing room space.

Photo	Description
	Rods for long (up to 170 cm) and short (up to 100 cm) clothes.
	Pantograph is a sliding design.
	Fastenings for trousers with a height of at least 60 cm. Can be single or double. Hangers with tucks are suitable for skirts.
	Large and small drawers for storing bedding, linen, jewelry, accessories.
	Pull-out or stationary shelves up to 40 cm wide. To store things on the mezzanine, you can use shelves up to 60 cm wide.
	Boxes and baskets for storing various items that do not need to be ironed.
	Modular systems for shoes. Shoes are placed on them or hung visually on the lasts.
	Holders for ties, belts or scarves are usually offered with clips.

Where can I buy the filling?

Many furniture stores sell items for filling storage systems. It is important to first decide on the exact quantity and size of the products. A wide range of products is also available in online stores selling furniture fittings. The price will depend on the material used and the complexity of the filling.

Is it possible to install the filling yourself?

There is no need to call a professional technician to install the wardrobe filling. Even a schoolchild can do this work. The only tools you need are a drill and. All fasteners must be purchased along with the cabinet filling.

How to make a dressing room with your own hands?

The process of installing a dressing room is not complicated. Before starting work, it is important to complete the drawing with maximum accuracy and select everything Consumables and filling. Step by step process Installing an open structure will allow you to avoid installation errors.

Photo	Description of work
	Necessary tools for work.
	We place the supporting rail at the selected height, level it using a level along the bottom side and mark the locations of the holes.
	Drill out the marked holes.
	We hammer dowels into the holes using a hammer.
	We fix the supporting rail with a screwdriver
	Installation of vertical guides into the grooves of the horizontal rail.
	We fix the vertical guides to the wall.
	We install the brackets at the selected height.
	We install horizontal shelves into the middle grooves of the brackets until they click.
	We install decorative plugs on the edges of the bracket.
	We connect the rod and the suspension, then install plugs on the rod and hang hooks.
	Similarly, we install a basket with dividing strips and a shoe rack.
	Ready wardrobe.

You can watch the video master class in more detail.

A walk-in closet behind a curtain will help hide storage areas from prying eyes. Photo examples are posted in catalogs.

Wardrobe rooms: design, projects, photos

A dressing room in an apartment is no longer a luxury, but a necessity of late. Speed modern life prevents you from wasting time searching for missing items. Everything should be rational and convenient. You can install a storage system in any room. The latest wardrobe room designs can be found in the photo selection.

1 of 24

Dressing room – great way place in one place not only clothes and shoes, but also various household items. However, many people are intimidated by the construction of this small room. Don't worry, you can do it with my own hands from scratch, and at a very low cost.

First, decide on the location of the dressing room. If you have a large enough hallway, you can take a small corner from there. Plus, this way you won’t lose useful space in other rooms.

To build a dressing room, you can use plywood, wooden boards, chipboard. But exactly cutting chipboard with edge gluing will be the easiest option in terms of processing and cost. In this project Walk-in closet was built with dimensions of 100 by 180 centimeters.

Youtube | Bubenita

For the wardrobe body

2 pieces of chipboard 50x266 cm;
1 piece of chipboard 100x266 cm;

For shoe shelves

6 pieces of chipboard 80x30 cm;
4 pieces of chipboard 50x30 cm;

For mezzanines

2 pieces of chipboard 80x40 cm;

For bottom rack

2 pieces of chipboard 100x30 cm;
6 pieces of chipboard 80x30 cm;

For top rack

2 pieces of chipboard 150x20 cm;
6 pieces of chipboard 80x20 cm;

General

drill;
plastic corners;
hexagon;
confirmations;
plugs for confirmations

How to do

Youtube | Bubenita

To attach chipboard to the wall, you can use ordinary plastic corners. Drill holes in the wall, insert dowels and screw the corners with screws. Corners are attached to the ceiling, walls and floor.

Youtube | Bubenita

The most large detail is installed as a second wall, two smaller parts will serve as the front walls with the entrance.

Youtube | Bubenita

Depending on what kind of dressing room you want to see, you may need drawers, shelves, and rods. For the shelves, it is enough to assemble the chipboard by screwing the boards to the sides using confirmations.

Youtube | Bubenita

Use special holders to secure clothes rails to the wall.

Youtube | Bubenita

Instead of sliding entrance doors You can hang an ordinary curtain. This will help make the space more comfortable and also save money. To hang it, you can use the same rod as in the dressing room if the curtain has rings.

The cost of such a room will be about 10 thousand rubles with all consumables.

Now you don’t need to run from the closet to the corridor where the full-length mirror is located, choosing this or that combination of clothes. And the sudden appearance of guests will not take you by surprise due to an untidy apartment, because all things can be distributed in the dressing room. Even in the smallest apartment, it is possible to place a compact dressing room in which clothes, shoes, and accessories will be stored.

Thus, the dressing room will place ready-made combinations of clothes, and things laid out in a certain order will save your time in the future on searching and selecting. An urgently needed item will be found in a matter of seconds.

Storage of things can be organized both according to the functional purpose of the clothes, for example, T-shirts and T-shirts on one shelf, jeans and trousers on another, and by the distribution of things according to color scheme. By installing a dressing room, you will always be sure that things are neatly hung, they will not wrinkle or lose their impeccable appearance.

Where can I place it?

It is possible to place a dressing room in a private house, in an apartment and even in a country house. Do not be mistaken that owners of small-sized housing should give up their own dressing room. The dressing room can be built-in or located in a separate room.

We present to your attention dressing rooms for every taste and budget.

From the closet

If you have a storage room in the layout of your apartment, then we recommend using this room in the most useful way. By placing a structure for storing clothes and things, you can make the best use of the entire usable area. The dressing room fits perfectly into the size of the closet. You just need to add various shelves, drawers, and brackets for hanging outerwear to your wardrobes. You can install dividing strips in the drawers and place belts, accessories, and hats there. Place neatly folded clothes on the shelves, as well as arrange shoes arranged by season.

The dressing room should satisfy your needs, so the design should be approached after analyzing the number of things. Understanding the total volume of things to store will help you calculate correctly required amount shelves

In the bedroom

If the bedroom is of impressive size and the owner prefers to have a dressing room at arm's length, then designers are ready to offer a variety of options. The dressing room can have sliding doors, or even have a structure without doors. An individual dressing room with a unique design is designed for each customer.

In the corridor

The optimal solution for filling the corridor space is to install a dressing room. Now there is no need to purchase cabinets and chests of drawers, which take up free space in the rooms. By installing a dressing room in the corridor, you solve several problems at the same time: freeing up free space in the rooms and organizing the empty space in the corridor. The dressing room can be designed as a corner room, built into the wall, or any other configuration.

From a niche

To make the interior stand out with its individuality, it is enough to use free niches for installing a wardrobe system. You will be able to attract the attention of others to such a non-standard approach, interesting design, and also make any niche useful and functional.

In the attic

You shouldn’t steal space for a dressing room in the bedrooms of your own cottage, because the attic space does an excellent job of solving this problem. The use of an attic allows you to rationally use the living space to suit the needs of a modern person.

Under the stairs

The space under the stairs is quite spacious and allows you to place things and clothes. Place your walk-in closet under the stairs and you'll save money on purchasing other storage furniture.

Materials

Various materials are used to make your own dressing room. The proposed list of materials will help you make your choice.

Drywall allows you to create a separate niche in the room, which is later filled with components for convenient storage of things. Drywall is easy to paint, so the dressing room can be made in the most daring color preferences.

From old furniture It’s easy to make a dressing room of an original and unique design, with a minimal investment of money and maximum savings in time for the manufacture of elements.

Chipboard is an affordable and widespread material for making frames, shelves and drawers. It allows you to create a dressing room in various color variations, with a matte or glossy effect of the facing surface.

The Joker system provides a framework that includes various fittings to enrich wardrobe rooms. Glass and shelf holders, hooks, hangers will make the dressing room functional.

Plywood is a material with increased strength properties. Plywood is widely used for making partitions and shelves in dressing rooms.

Wood is a natural material that is suitable for creating dressing rooms in children's rooms, cottages, and any residential premises where the owners care about the safety and environmental friendliness of the interior.

Chrome pipes allow you to make a mesh wardrobe room. Pipes are used outside diameter which does not exceed 25 mm. The pipe can be easily cut with a hacksaw, and the connecting and mounting hardware. The structure, made of chrome-plated pipe, has high performance characteristics.

How to do it right: step-by-step instructions

Planning

Today, a dressing room for most people is no longer a luxury, but a necessary attribute of a living space. The high pace of life requires a large amount of clothing, which is important to store properly. A well-designed dressing room will create a certain mood in the room, save space in other rooms, and provide convenience and comfort in everyday life.

Before designing a dressing room, you should decide on its location, design and capacity requirements, and the amount of money you are willing to spend on production. You can provide one dressing room for all family members or, on the contrary, allocate separate niches for each. The size of the room will depend on whether you want to supplement clothing storage with items such as blankets, pillows, and bedding sets. Sports equipment can also be located in the dressing room.

Pre-sort your items to calculate the required number of shelves and hangers. It is advisable to draw up several sketches of dressing rooms, and after consulting with all family members, choose one. When designing, consider several additional shelves that may be needed in the future.

When developing a mesh wardrobe project, you should take into account that the design of the mesh shelf can withstand no more than 60 kg. However, such systems are distinguished by their affordability and relative ease of installation.

Installation

The shelves are installed at a distance of 35 or 40 cm from each other. The depth of the shelves, as a rule, is more than 40 cm. Wide shelves allow you to fold clothes in several piles. Long shelves require additional support to prevent sagging from heavy items. It is recommended to place the rods at a distance of 100 cm above each other. If you have long coats or dresses, it is possible to install a single-row rod. Drawers should be installed using high-quality fittings that can withstand high loads. Drawers located above the chest line are extremely inconvenient. Baskets with heavy items should not be placed higher than your height.

Sliding doors fit into almost any interior and room configuration. Such doors not only differ in their functionality, they also add a special design to the interior. Sliding doors are easy to use for children and the elderly. No door installation required certain experience or special skills, just insert the doors into the guides.

When designing a rack in a dressing room, you should not forget that it is not customary to store linen in them, as well as medicines in open or transparent containers. You should think in advance what you will place on open shelving. Racks are practical, so they can be made in a wide variety of sizes. Determine your needs and act boldly. Racks allow you to save space and compactly store a large volume of various things and clothes when folded.

Lighting and ventilation

Particular attention must be paid to creating sufficient lighting and ventilation. The presence of small natural lighting does not exclude the need for additional light sources, such as chandeliers, sconces, and floor lamps. Light plays an important role in the area where the mirrors are located. Lighting located on the floor along the entire perimeter of the room will increase the lighting on the lower shelves. The main work to ensure clean air performs ventilation. It is a ventilated room that guarantees protection from unpleasant odors and the formation of pests. Ventilation also prevents dust from settling on clothes and things.

Arrangement

When sufficient free space in the dressing room allows, you can install comfortable armchair or sofa. It is worth considering the placement of mirrors, which can be free-standing or mounted to the walls. It would be useful to purchase additional hangers, which, if necessary, will help to place new clothes.

Presented to your attention various designs dressing rooms that can serve as inspiration for designing your own.

Here is an example of a dressing room, which is located in a closet. It should be noted that the room is made according to the requirements of a man. Shelves for bags, shoes, denim trousers, sweaters and pullovers are arranged in a certain order.
This pantry takes on a completely different meaning when it has shelves that span the entire length of the room. The design of the dressing room is decorated with embossed baguette. Due to limited space, the design does not have hinged doors, as well as a minimum number of drawers.

The design is distinguished by the presence of built-in lamps along the entire perimeter of the room. Spot lighting allows you to special effort find the things you need on the top shelves. Since the width of the room is sufficient to accommodate various pull-out shelves, this dressing room is designed with all sorts of variations of these.

The dressing room is designed in a minimalist style, with a small number of drawers. For small items and various accessories, wicker baskets with handles are used. Trousers are not stored folded on shelves, but hung on special holders. The structure is mounted to the ceiling and floor surface to ensure the stability of the system. Recommended for installation in a small bedroom. The dressing room is economy class and allows you to make the most of the free space in the bedroom at low cost. Low cost, convenience, ease of installation are the distinctive features without a door structure.

Sliding doors separate the sleeping area from the dressing room. This solution is suitable for premises with with total area more than 18 sq.m. As a rule, such dressing rooms are equipped with a full-length mirror and an ironing board. In a separate dressing room it is possible to store not only clothes and shoes, but also household appliances such as a vacuum cleaner and iron. It is possible to add shelves to the system for storing books, family photo albums, personal hygiene items and cosmetics.

The sliding doors separating the dressing room will be modern and practical solution. They are made using glass or mirrors. Glass can be colored, transparent or tinted. Quilted or patterned glass, as well as mosaics, are often found. The cost of the original design of sliding doors is relatively high, but they will certainly demonstrate the excellent taste of the owner.

The dressing room is presented complex design, which, due to large mirrors, visually increases the space in the corridor. Interesting design will certainly attract the attention of guests. In the absence of sufficient light in the corridor, built-in lighting in the wardrobe system will be relevant.

A widespread option for a dressing room in Russian apartments. This choice is preferable for large apartments with wide corridors. Hinged doors are a bit of a nuisance for use in hallways. Therefore, sliding doors are recommended, which are distinguished by their reliability and stability. Such dressing rooms are made strictly according to size and allow you to hide the unevenness of the corridor walls.

A design proposal that creates a certain interior style in the apartment. Wicker baskets made of wicker add originality to the dressing room. Several vertical and horizontal partitions and the presence of hooks give the design simplicity and minimalism. We are also pleased with the relatively low cost of production and ease of installation of such dressing rooms.

A bold decision in which the dressing room has no doors. Minimalist design distinguishes the structure. It is recommended to install a double-row hanger in the dressing room if there are a large number of blouses, jackets, and suits.

Using plasterboard, a separate niche was made into which the wardrobe structure was installed. This solution helps to use any free space available in an apartment or house. Often, residential projects already have various niches that are perfect for dressing rooms. You can find houses in which each family member has a separate niche with a dressing room.

Install folding doors in the niche, and the dressing room is ready to be filled with shelves or a hanger. Doors can be plastic, glass or wood. Various textured curtains also look great and serve as an excellent replacement for doors. Manufacturers offer a huge range of components and ready-made systems for filling a dressing room.

Spacious attic with a modern wardrobe system. Restrained color palette and bright sofa create a special style. High walls allow you to place hangers for outerwear, such as coats. And in narrow niches it is possible to store shoes.

The dressing room is made in light colors, which visually add spaciousness to the room. The lack of natural light is compensated by installing various lamps directed into all niches of the attic. The free space in the middle of the dressing room is used for furniture, which also stores various things and clothes.

The presence of an apartment in the attic does not exclude the possibility of installing a dressing room. The design is presented in pastel colors, which creates coziness and comfort. The low wall of the attic does not allow the installation of a wardrobe, so storage of things can be organized in the best possible way using a wardrobe system consisting of chrome-plated pipes.

Sections