Solenoid flange valves SMART

Industrial valves SMART is used for cold, hot, process water, air, glycol, non-aggressive liquids and gases. The flange electromagnetic valve is mounted on pipes with a diameter of 50 to 300 mm. The valve body is cast from ductile iron or steel. The housing is coated with a special compound to provide excellent corrosion resistance. The dimensions of the flange valve comply with GOST. The membrane is made of chemically resistant EPDM polymer. Also available are flanged solenoid valves from of stainless steel AISI 304, for steam and aggressive media.

Working versions: flanged solenoid valve normally closed (NC) or flanged solenoid valve normally open (NO). Control coils (electromagnets) alternating current designed for voltage AC 220V, 50/60Hz. Control (opening or closing) is carried out by applying an electrical signal to the coil. High throughput allows use in water supply systems, and resistance to high temperature, and in heating systems. On request, the flanged solenoid valve can be equipped with coils of other voltages.

Manufactured by Smart Hydrodynamic Systems ( South Korea)
The product is certified. 1 year warranty

Flange solenoid valve SMART HF6502

Normally closed valve(no voltage - closed);
Industrial flanged solenoid valve
Medium: air, water and other neutral liquids and gases;

We have a solenoid valve made of AISI 304 stainless steel, for aggressive media and steam, at temperatures up to +250 °C.
Flange valves with a diameter of 200, 250, 300 mm are available upon request.

Flange solenoid valve SMART HF6504

Normally open valve(no voltage - open)
Solenoid valve flange, industrial
Pilot action. Body - malleable cast iron; membrane - NBR
Medium: air, water and other neutral gases and liquids;
Operating temperature range: -10… +90 °C
Installation: counter flanges according to GOST 12815
The flanged solenoid valve is supplied complete with a coil
voltage AC 220V, DC 24V; Protection class: IP65

Flange solenoid valve Made from SS304 steel. The fluoride rubber diaphragm can withstand temperature fluctuations from -20ºС to +120ºС and is used when working with aggressive gases or liquids. You can also buy a 12 Volt solenoid valve for water with an NBR membrane designed for oils, neutral liquids and gaseous substances(temperature - from -10ºС to +90ºС). Features of the series devices:

• Flange connection according to GOST.
• Protection: IP65.
• Diameters DN 15-100.
• AC coils: AC 24V, AC 220V.

Reels direct current: DC 12V, DC 24V.

This is a series of universal stainless steel electrovalves with flange connection. They are used in pipeline systems, where the maximum pressure does not exceed 10 bar.

The solenoid valve or any other voltage operates smoothly regardless of pressure fluctuations.

The range of sizes for mounting the series products has been increased. Such a solenoid valve (stainless steel) is normally closed - it opens when exposed to current. It has found its application in industrial enterprises, as well as in water parks and bath complexes. The heating solenoid valve of this line is effective in systems with aggressive working environments. Another use case is the passage or redirection of coolant in a gas pipeline. When installing such a solenoid valve for compressed air into the gasification facility, it is necessary to check its compliance with GOST. Buy flanged solenoid valve By favorable price from a warehouse in Moscow with delivery throughout Russia.

Cast iron and brass solenoid valves are used for cold, hot, process water, air, glycol, non-aggressive liquids and gases.

For aggressive media, steam and steam-water mixtures, food products, flanged ones are available solenoid valves made of AISI 304 stainless steel.

Version: normally closed, normally open; direct and pilot action.

The flanged solenoid valve is mounted on pipes with a diameter of 15 to 200 mm. The housing is coated with a special compound to provide excellent corrosion resistance. Connection dimensions flanged valves comply with GOST 12815.

Solenoid valve SMART normally closed, SMART normally open. Solenoid valves high pressure for water, air, solutions, steam, oil, etc.. Maximum pressure 25 bar, pressure drop from 0.5 to 25 bar. Temperature working environment-30..+185°С.

Solenoid flange solenoid valve SMART normally closed, SMART normally closed with manual override, SMART normally open. Solenoid valves for water, air, solutions, oil, petroleum products, fuel, gas, etc. Maximum pressure 12 bar, pressure drop from 0.3 to 8 bar. Working environment temperature -20..+120°С.

Two-way electromagnetic valve SMART . Solenoid valves for superheated water, steam, oil, air, solutions, oil, freon, carbon dioxide etc. Maximum pressure 16 bar, pressure drop from 1 to 16 bar. Working environment temperatures -30..+185°С.

Solenoid valve SMART flange connection normally closed. Solenoid valves for water, alkalis, air, solutions, diesel fuel, oil, freon, carbon dioxide, steam, steam-water mixture, petroleum products, etc. Maximum pressure 16 bar, pressure drop from 0.5 to 16 bar. Working environment temperature -30..+250°С.

Solenoid valve SMART normally closed, SMART normally open. Solenoid valves for water, alkalis, air, solutions, diesel fuel, oil, freon, carbon dioxide, etc. Maximum pressure 10 bar, pressure drop from 0 to 10 bar. Working environment temperature -20..+120°С. Electromagnetic valves with a diameter of DN15-DN50 can be equipped with explosion-proof electromagnetic coils

Solenoid valve indirect action type VF is designed for instant, automatic supply or shut-off of the flow of the working medium. The armature of the solenoid coil opens or closes the valve pilot hole. The pressure of the working medium through the pilot hole acts on the locking element and completely opens or closes the flow area of ​​the valve. The indirect acting valve can operate in hydraulic systems if there is a minimum differential pressure of the working medium (P min = 0.3 bar), at zero pressure the valve is inoperative. The valve type VF has a flange connection to the pipeline.

DN 50-150
PN 0.3-10
Application: water, air, glycol-based liquids
Working environment temperature: from -10°C to +120°C. Maximum short-term temperature: +130 C
Operating principle: indirect action
Design of the locking element: normally closed
Body material: cast iron
Seal material: EPDM
Coil voltage: AC220V, DC24V
Insulation class: F
Coil protection degree: IP65
Connection to the pipeline: flange. Counter flanges PN10 and PN16 according to GOST 33259-2015.
Tightness class: A according to GOST 9544-2015
The direction of medium supply must coincide with the arrow on the valve body

You can buy indirect-acting solenoid valves produced by DENDOR Valve Industrial by contacting the sales department by phone:
Saint Petersburg: ; Moscow: ; Russia: (free call for all regions of Russia)
or by sending a request by email:
The price for all DENDOR Valve Industrial products is available to you in the section

Technical characteristics of normally closed valves

Electromagnetic (solenoid) valve

Electromagnetic (solenoid) valve has found its application in various pipeline systems. They are used for working pumping of liquids, water, vapors, gases and other non-aggressive media.

The operation of such devices is based on the regulation of air, water, and oil products, and the operation of the device is based on the electromechanical principle. For this purpose they are used electrical impulses in the locking mechanism, which are turned on or off automatically or through manual control. A device of this type can always be installed on that part of the pipeline to which there is easy access. For this purpose there are various systems fastenings

Made from various materials. They come in brass, stainless steel, cast iron and plastic. Experts also distinguish mechanisms by connection type. They are divided into flanged, coupling and quick-release. Users can have devices of direct, bistable, pilot type of action. There are also models of valves with manual override, diaphragm and piston. According to the type of execution, they are divided into normally open and normally closed.

Valves are installed on pipeline systems industrial enterprises, as well as in residential buildings, agricultural irrigation complexes. The products are capable of operating at extreme temperatures from minus twenty to 120 degrees Celsius. They remain operational at optimal pressure values ​​of 10 bar. When working with some materials, the installation of a special NBR membrane is required. All types of mechanisms have a quality guarantee of at least one year. Buy electromagnetic (solenoid) valves at a favorable price in Moscow with delivery throughout Russia.