For wine connoisseurs: how to make the right shelves with your own hands. DIY wine rack: interesting ideas DIY wooden wine racks drawings

home

Codes

For true connoisseurs of European cuisine, not a single meal is complete without a glass of expensive wine. This drink has long gained wild popularity and still does not give up its leading position. Such a noble product requires a special approach to its storage. Many true connoisseurs collect very valuable and rare specimens in their collections.

Today we're sharing 13 amazing DIY ideas for decorating wine racks in your home.

Built-in wardrobes

Obviously, one of the most convenient and attractive ways to store your wine collection is to integrate special shelving into the finished space. This way you don't have to look for extra space in your kitchen. The Room Interiors portal suggests equipping a regular sideboard for dishes with shelves. Thus, in one half you can store drinks, and in the other, sets of glasses and cutlery.

Another option, equipped with kitchen set. All you need is to equip one of the modules with special compartments and a grille, as the designers from Live Laugh Decorate did.

The following DIY project will appeal to those whose kitchen space is so limited that it seems impossible to allocate even a little free space. You can get a small vertical shelf. It is very narrow and therefore will not take up too much space, and you can vary the height yourself. If desired, you can make it from the floor to the ceiling.

A stunning wine rack option. All you need to do is do a few round holes in sheets of plywood and fasten them together. This shelf can be used as a partition to divide space. If you paint it inner part in an unusual color, it will become a stylish and fashionable interior detail.

Wall racks

Not everyone is lucky enough to have extra space for a built-in wine rack. However, everyone will definitely have a free wall. So why not use the empty space for a minibar? This project from Shanty 2 Chic was brought to life using a few pieces of wood and large hex screws. Light wear and marked title stickers give the shelf an elegant look, turning it into an antique piece.

An unusual option is offered by the designers of Hart’s Desire Photography. This wooden shelf allows you to store your drink at an angle of 45 degrees. It looks a little dangerous, but in fact, the design is very reliable!

If you prefer versatility and multifunctionality in everything, then the project from The Kurtz Corner is what you need! By attaching special threaded trays to a regular hanging box, you will accomplish two tasks. This will be a shelf for storing both wine and glasses.

Our next idea comes from Erin's Lane/Etsy. Everything is extremely simple: you only need a solid wooden board and a few cast iron bolts from railway. We combine all this, and a wine rack appears in your home. rustic style! A quick but very stylish DIY project.

Pipes

The idea may seem strange, but a wine bottle perfectly follows its cylindrical shape. So why clutter the space with a million shelves and racks when wine can be stored in space-saving tubes of the right size? For example, equip the cellar with a wall made of cylindrical building blocks. Now they can be purchased at any hardware store. Created in a terracotta clay pipe ideal microclimate for storing a delicate and capricious drink.

Turn your wine rack into a real work of art! A budget alternative to brick blocks will be durable PVC pipes. Create an amazing composition from elements different diameters, as the designers of Adventures in Creating did.

Drainage pipes are also great for storing your favorite wines. The main thing is to firmly fasten them together, then your drinks will be completely safe. Also, Adventures of an Almost 40 Year Old Intern proposes to equip a similar coffee table. This will create an additional surface for placing things or accessories.

If you are looking for the most simple and economical option, then you won’t find anything better than a shelf made of postal cardboard tubes. Agree, this project from Bob Vila looks very original and worthy of attention!

Case stand

Our latest DIY project is a true work of art! Shelf self made from DanMade for HGTV made from one piece natural wood and stakes. All that remains is to find appropriate place for such a stunning accessory.

Another original idea

And so, now you have as many as 13 ideas for equipping a wine storage. If you have your own original ideas, don't forget to share them in the comments!

Categories:
Places: .

If you are a healer of European cuisine, then you must love treating yourself to a glass of expensive wine with your meal. This drink has gained popularity and is not losing its leading position. Such a noble product requires a special approach to storage. True connoisseurs collect collections of rare and valuable specimens. If you decide to get one, then you should take a closer look at how to make a wine rack with your own hands. A description of the work stages will be presented below. You can easily make structures for this purpose yourself.

If the kitchen area is limited and has little free space, you can get a vertical shelf from floor to ceiling. To carry out the work, you will only need to make a few holes in the sheets of plywood and fasten them together. This design can be used as a partition to divide space. If you paint the inner surface of the product, the shelf will become a fashionable and stylish interior detail. But you can buy a shelf in a store, but some home craftsmen prefer to make such structures themselves. Among other things, when carrying out work, you can use available materials and tools. Thus, the design will cost almost free.

Preparing tools

If you need a wine rack, prepare the following tools:

electric jigsaw;
grinder;
pencil;
roulette;
building level;
screwdriver;
drill;
circular or hand saw.

Preparation of materials

At a hardware store you can buy dowels, drills for plugs, self-tapping screws, a wooden pallet, and sandpaper. The latter will be needed for surface treatment.

Work technology

If you are making a wine shelf, then it can be based on old pallet. To do this using circular saw it must be sawed, part of the structure separated to make a shelf. Its height should be approximately 50 cm. The next step is to prepare the boards for the base. Using a nail puller and a hammer, you need to tear off two boards, but the main thing is not to break them. Three small blocks should be prepared to separate and secure the bottom. The bars are cut using electric or with a hand jigsaw, and the length of these blanks should be slightly greater than the width of the pallet boards. They should extend slightly beyond the base.

Grinding and working with holes

The wine rack should look attractive, so the beams and boards must be sanded. This will rid the product of burrs and irregularities. In this case, you should use sandpaper, the grain size of which can vary from 120 to 200. Grinding machines can also be used. Holes for glasses should be made on one of the boards. Trays are usually 100 cm wide. The holes should be standard, but they can be made in such a way that they exactly match the size of your glasses. At standard sizes For dishes, one hole should be marked, 11.5 cm from the edge of the board. Then three more holes should be marked, 10 cm apart. There should be a distance from the edge of the board ranging from 4 to 4.5 cm in width. Similar marks must be made on the other side.

The wine rack must have holes that can be made using a drill or drilling machine. Markings should be made from the edge of the drilled holes to the edge of the board, cutting off unnecessary parts. The resulting corners are processed sandpaper.

Carrying out the assembly

Wine shelves can be made from different materials, however, wood will be the cheapest. If you used pallets, then after completing all the steps described above, you need to assemble the bottom of the shelf. The glasses will be located along the length. Parts of the bottom must be fixed with self-tapping screws; holes must first be made in these places with a drill. After the bottom can be assembled, it should be strengthened to the base. At the same stage, everything needs to be fixed with self-tapping screws, having previously made holes for them. In this case, you should exclude the possibility of the board splitting, otherwise you will have to look for a replacement.

After assembly, the product should be cleaned with sandpaper and covered with stain. Once the wine racks are made, they can be hung on the wall. To do this, you should use it to mark points on the wall. Using the marks obtained, you should make holes with a drill, and then insert dowels into them. Self-tapping screws with a length of 2.5 cm are screwed into the latter. The hats should not be screwed tightly, because the shelf will be removable.

Alternative shelf options

DIY wine shelves can be made using simpler technologies. For example, wine cabinet can be made from wooden box. It is installed on steel legs, and holes for bottles should be made in the bottom. Between the rows there is a shelf that will separate the bottles from each other. The simplest solution is a wooden board that is attached horizontally to the wall. You can make holes in it using a special drill. The main subtlety is that the holes for the necks need to be drilled at an angle, and the circles should be the same. Wooden plank cleaned, if desired, painted and varnished.

You can make your own wine rack; the simplest options are to use water pipes, or rather, what was left of the bathroom renovation. Using adapters, the pipes are connected to each other in a zigzag structure. To prevent bottles from rolling off the surface, the pipes should be bent at a certain angle.

Conclusion

You can save space by using a wine bar that will be located under the table. To do this, you can use reinforcing bars that are bent in the shape of hooks.

Elegant shelves for storing wine bottles will provide you with a lot of free space in the kitchen, and will also give you a gift. aesthetic way their placement! The location of such stands can be numerous - on a table, on a wall, under a chair or in a kitchen cabinet. Today we want to show you some examples of photos that you can take with your own hands!

Let's make a small shelf ourselves!

The small wine bottle holder is ideal for those who like to enjoy a glass of wine at dinner or when entertaining guests. Or, as an option... You are a collector of wine bottles... Surely, you have a separate place for them somewhere in the basement... But in your collection there are a couple of the most luxurious and beautiful bottles! How can you leave them far away in the basement? After all, you, as a collector, will want to look at such beauty endlessly... In this case, make a stand for wine bottles for them with your own hands! And enjoying this beauty will be at least doubly pleasant!

Before making such a stand, you must prepare all the necessary materials and tools. First you will need two plywood sheets with a size of about 26x38 centimeters. Secure them with loops. And at a distance of about 30 cm, attach a cord to fix the distance. Tools you will need: ruler, pencil, string, hole drill, and 150 grit sandpaper.

Making holes for bottles!

Before cutting holes, you need to measure them! We make marks and cut them out. In total we should have 12 circles. After that, we sand the edges with sandpaper. If you wish, you can paint the resulting stand.

Installation of hinges

After the work has been done, you can safely begin installing the hinges! For greater stability, it is recommended to use at least 2 loops.

We fasten the rope

The last step is to secure the string to securely hold the position of our shelf. Drill small holes, thread the cord and tie knots.

Creative shelf made of pipes and leather

Elegant wine cabinet made of wood and leather

You can make a beautiful shelf with your own hands from pieces of leather and pieces of wood that were left over. Which will fit perfectly into the interior of a dining room or living room. Wood is an excellent material for creativity. you can use suitable paint or apply an aging effect. In addition, a stand for wine bottles is an incomparable gift that everyone will appreciate!

Creative Ideas for Storage of Wine Bottles

You can make a minimalist wine rack using plywood and leather strips. Treat yourself or a wine lover with a chic handmade gift. This wine stand Easily mounted on a wall, table or cabinet. Decorate your interior with this chic shelf!

We make it with our own hands!

To work you will need: plywood sheets, smooth wooden nails, wood glue and leather strips. As tools will also be required drill and sewing machine.

Shelf made of wood and metal plates

If you don't want to spend too much time and effort creating a bottle holder, then you should use this idea! This shelf is made of board and metal hooks. The most important thing is to choose creative hooks.

Installation Guide

Bottle shelf on the wall

An original idea for a country house

From several wooden planks You can make a wine rack with your own hands, which is ideal as decor for a country-style kitchen. Ready product You can decorate to your taste and color.

Practical shelf

Wall mounted wine racks will add an elegant touch to your kitchen. appearance. If you are making a shelf with your own hands, then pay special attention to the strength and stability of the bottles so that they cannot fall.

Wine rack made of wooden pallets

From wooden pallets You can build almost any piece of furniture! Using a few wooden planks, you can easily build a simple wine bottle rack with shelves for bottles and glasses. This stand can be easily mounted on the wall, which is an excellent option for small apartments.

A practical idea for wine lovers

Wine racks with space for glasses are very practical because they replace your Kitchen Cabinet and combine the function of wine. 🙂

Make a simple DIY holder

All you need: colored tape, paper towel rolls and felt. Such a device will a good addition in the kitchen. After all, the stand can be used for all different bottles.

Wine rack (stand) for horizontal storage of bottles in the interior of the room

Wine Bottle Rack from Exclusive Wooden Products

Small wooden stand cylindrical in shape with a hole for the neck of the bottle. The manufacturer offers stands made of oak, ash and alder. The design is interesting in that it does not need to be attached to the surface on which it stands. The stand does not fall due to the counterweight of the bottle inserted inside.

Wine bottle holder from Exclusive Wooden Products makes you think about the laws of physics

By adjusting the depth of installation of the neck into the hole for greater stability, you can even install an empty bottle of your favorite vintage wine in the stand. If desired, you can use a laser to engrave your company logo or any other image on the stand. The stand comes with a bag made of thick natural fabric, on which a similar logo can be embroidered. A great gift option!

If desired, you can use a laser to engrave your company logo or any other image on the stand.

Hanging wine rack Cioso Blomus

The Cioso hanging wine rack was designed by the Flöz Design team for the German company Blomus. It is made of stainless steel and is designed for 8 standard bottles. An excellent solution to the wine problem for a loft-style kitchen!

The hanging wine rack Cioso Blomus will fit perfectly into the interior of a loft-style kitchen

Creative Umbra wine racks

A charming creation by designer Dennis Lin - fancy, complex wine racks made of circles of different diameters, into which absolutely any wine can be placed without any problems!

The creative Umbra wine rack feels light and unstable, but keeps your valuable bottles safe

Designer David Quan presented an equally interesting version of a rack for five bottles in the form of an outlandish flower made of transparent acrylic.

Wine bottle rack in the shape of an outlandish flower made of transparent acrylic is transparent and light

Hanging wavy wine bottle rack from Design My World

The idea of creating this graceful wavy wine rack dawned on the designer while he was admiring the stream of wine pouring into a glass. Simply brilliant! To make it even more decorative, you can place bottles of white wine on one side and red wine on the other. A kind of wine yin-yang... It’s not for nothing that they say that the truth is in wine! Although many people mistakenly look for it at the bottom of the bottle...

The Flow Wine Rack from Design My World will decorate your kitchen without taking up much space.

Make wine bottles the highlight of your kitchen interior!

The wooden wine rack from Potterybarn harmonizes well with the entire decor, matching it in style.

The hanging wine bottle rack from Jakob Wagner evokes surprise and admiration for the designer's courage

Kitchen design for a connoisseur of good wine from Ernestomeda will allow you to keep the entire collection in sight

The calm design of the wine rack from Potterybarn will not disturb the harmony of any style.

Design devices for storing wine bottles are so diverse that anyone will choose a wine bottle rack to suit their taste.

Creative wine rack from Umbra resembles a fancy folded ribbon

The TRELLIS Rack System wall-mounted wine rack from Modern Cellar attracts attention with its nobility and clear lines

The FLOAT Wall Shelf Mini wine rack from Modern Cellar reliably protects fragile bottles

The wine cabinet from Potterybarn has an impressive and respectable appearance

Wine rack from Potterybarn is decorative and functional

This wine cooler from Potterybarn has a lightweight, sleek design and is perfect for... classic interiors and interiors in Provence style

Wine rack from Potterybarn gives an impression of solid nobility

The wine rack from 2B.group will best fit into kitchen interior loft style

The original wine rack for a music lover has an unusual design, which guests will appreciate

A bottle holder will be an excellent accessory in your interior. After all, this useful thing for the home, which will serve as storage for wine bottles.

All guests and friends will be happy when they come to your house to see neatly stacked bottles that are easy to get and offer to you.

Making such a stand with your own hands is quite simple. In addition, it can be used not only in the apartment, but also for...

Materials for manufacturing may vary. Use available materials, such as tin cans, cardboard, wood, fabric, and so on.

We will show you several options on how to make a stand for wine bottles with your own hands and hope that you choose the one that suits you.

Bottle stand made from newspaper tubes

In every home you can find many newspapers and unnecessary magazines. We will use them in our master class.

For a DIY wine stand made from newspaper tubes we need:

newspapers or magazines;
stick for mini-kebabs;
ruler;
stationery knife;
pencil;
cardboard;
brushes;
scissors;
clothespins;
paints and varnish.

Take a newspaper page and unfold it, cutting it into four parts. Next, take a kebab stick and begin to wrap strips of newspapers onto it.

You should end up with tubes with an uneven, beveled end. We fold the wound tubes for the future stand of bottles side by side.

To do this, it is better to make a square outline of books so that they do not roll away and fit tightly to each other.

Every housewife buys canned corn, peas and other products. Jars should not be thrown away. You can make a pretty cute bottle holder out of them.

Moreover, even a woman can easily cope with this.

We need it for a wine bottle holder following materials:

6-12 tin cans;
can-opener;
aerosol can;
glue;
fabric or cardboard;
gloves.

The number of jars may vary, it all depends on how many tiers you want to make in the stand.

How to make a bottle stand from tin cans with your own hands

Wet the jars to remove all labels. After this, wipe them well or leave them to dry for a while.

Using a can opener, cut out the bottom and bottom of each jar. To prevent the remaining sharp edges from injuring you, you need to grip them reverse side or carefully remove it altogether.

For beautiful decor DIY wine bottle coasters, take a can and spray paint on one inside side of the can first, then turn it over and apply paint on the other side.

Don't forget that the tin has ribbed edges, so apply the paint carefully while rotating the future stand.

After the paint has dried, you can begin outside. Color it in the same way.

A DIY wine rack would be an amazing idea. It's quite simple and unusual.

Now we need to assemble our stand for wine bottles. To do this, secure each can with a clamp or clothespins and apply super glue between them.

You can give it different shapes, guided by your imagination. Stand for wine bottles tin cans must withstand the number of planned liters, so you should choose good glue.

DIY cardboard bottle stand

This stand looks no worse than store-bought. Only you can save money and make it from existing materials.

You will need:

2 paper towel rolls;
scissors;
ruler;
glue gun;
plumbing tape of any color;
felt;
spray glue.

You need to take the sleeve and cut it in half, using a ruler to determine the center.

It is better to cut with a stationery knife or a wood knife, pressing lightly on it, but not overdoing it, so as not to bend the future shelf for the bottle.

Do the same with the second bushing. This way you will have 4 cells for wine bottles.

Use a hot glue gun to attach all the pieces of the stand. If you don’t have much space in your apartment, you can use two or three cells or add more.

Take plumber's tape and stick it around the edge of each cell, but without touching the internal ones.

To make the stand more colorful, use felt. Cut a piece that will fit tightly to the surface of all cells.

Apply glue to the back of the fabric and attach it to the bottle stand with your own hands, pressing well.

Remove excess felt with a knife only after it has dried. For perfection, you can cover the entire bottom surface with colored tape.

Whatever bottle stand you choose, it will definitely decorate your interior and will be very useful for any occasion!

An ordinary wardrobe or household refrigerator. Although many people uninitiated in the intricacies of storing and tasting elite types of alcohol believe that one or two bottles are quite capable of spending some time in unsuitable conditions without losing much in quality, it is difficult to agree with such an opinion. Of course, in a short period of time spent next to other products, the wine will not deteriorate completely, however, this will not have a positive effect on its taste: a properly preserved drink reveals the bouquet more fully, forms a more subtle and complex taste and ultimately gives the taster more pleasure. If you treat this issue with disdain, then even a drink of the highest category will quickly turn into unremarkable and unmemorable, its potential will not be realized.

Moreover, the greater the number of true wine connoisseurs, the more popular it gains among them. special equipment and furniture, whose main purpose is to preserve this noble drink. Such accessories help ensure proper storage conditions and greatly facilitate this process. In addition, properly selected or racks will most likely become original decoration for the kitchen or any other room where you decide to place them. Over time, equipment that fits harmoniously into the interior becomes an indispensable part of it, without which in the future it will be difficult to imagine the corresponding room.

Situations when it is necessary to organize a place for storing a relatively small amount of wine deserve special attention. Arranging a wine cellar or even purchasing a specialized wine cabinet in this case will be unnecessary - they, for the most part, will stand idle in vain. For small wine collections, high-quality wine shelves are better suited. And, although some wine connoisseurs prefer to buy ready-made ones from manufacturers, the idea of making wine shelves with your own hands remains no less popular. This method has a considerable number of advantages: first of all, hand made It turns out to be much more profitable than purchasing a finished product. Also, when buying wine racks in a store, you will have a choice only from the models presented in the assortment, but when assembling it yourself, you are free to decide for yourself what appearance the accessory you create will have.

Make your own wine racks

Many people refuse the idea of making shelves for storing wine with their own hands, fearing that working with such a complex piece of furniture, as they consider it, will require highly specialized skills and special tools. This reasoning is only partly true: to assemble the simplest shelves from boards, you do not need any rare skills. Of course, the more experience in working with wood a master has, the more complex and original shelf will come out from under his hands, but more simple options even those who rarely pick up tools can do it.

In this case, the tools themselves will need the most common ones, which can probably be found in any home. Among them are measuring and control devices, such as a building level and tape measure, drill or screwdriver, saw, jigsaw, as well as a plane and sandpaper. This standard set is enough to relatively quickly make a simple wine rack or shelf with your own hands, which will in no way be inferior to store-bought samples, and in some ways will surpass them.

Also, when making shelves with your own hands, you should definitely take into account where it will be placed, and this is not only about the harmony of the appearance of the shelves overall design premises. Thus, it is unlikely that you will be able to fit an accessory that is too bulky in the kitchen, but in this case there are many unusual options for the design of the shelf and its placement. It would be wise to place the wine storage area close to the countertop, for example, directly under it, so that you can reach it without leaving this place - this will come in handy when cooking, when all the ingredients must be at hand. If the kitchen interior does not prevent the shelving from being placed more freely, then a shelf located in plain view will become a wonderful decoration of the room.

Another situation is that you do not plan to keep the shelf in any one place, but are going to move it from one room to another. In this case, you can make something like a basket for wine bottles from wood. It will store wine no worse than on standard shelves, but such a set will not cause problems during transportation, and it will look much more attractive and unusual. By installing several similar baskets in the kitchen or living room, you will add originality to the interior of the room and emphasize its advantages with the help of the chosen design.

In the case when elegant appearance does not play a dominant role, but your primary task is to put things in order in storing wines and quickly make them yourself simple shelf for wine, you can prepare a place to store drinks from just one board, installed vertically or at an angle to the wall. In such a base, grooves for bottles are cut out - right in the center, in the form of round holes, or on top, in the form of hollows. This accessory is suitable for storing both a small amount of wine and a larger collection; such a shelf, without taking up much space, will help you avoid getting lost in different varieties drink and preserve its unique taste.

To store wine, you can't get by with just shelves - you'll also need air conditioning to maintain the storage. required temperature and humidity. When ordering on our website together with a racking system, you will receive a guaranteed 5% discount on the selected climate system and rest assured that your drinks will always be stored in suitable conditions.

Elegant shelves for storing wine bottles will provide you with a lot of free space in the kitchen, and will also give you an aesthetic way to place them! The location of such stands can be numerous - on a table, on a wall, under a chair or in a kitchen cabinet. Today we want to show you some examples of photos that you can take with your own hands!

Let's make a small shelf ourselves!

Before making such a stand, you must prepare everything necessary materials and tools. First you will need two plywood sheets with a size of about 26x38 centimeters. Secure them with loops. And at a distance of about 30 cm, attach a cord to fix the distance. Tools you will need: ruler, pencil, string, hole drill, and 150 grit sandpaper.

Making holes for bottles!

Installation of hinges

After the work has been done, you can safely begin installing the hinges! For greater stability, it is recommended to use at least 2 loops.

We fasten the rope

The last step is to attach a string to securely hold the position of our shelf. Drill small holes, thread the cord and tie knots.

Creative shelf made of pipes and leather

Elegant wine cabinet made of wood and leather

You can make a beautiful shelf with your own hands from pieces of leather and pieces of wood that were left over. Which will fit perfectly into the interior of a dining room or living room. Wood is an excellent material for creativity. You can use a suitable paint or apply an aged effect. Plus, a wine bottle holder is an incredible gift that everyone will appreciate!

Creative Ideas for Storage of Wine Bottles

You can make a minimalist wine rack using plywood and leather strips. Treat yourself or a wine lover with a chic handmade gift. This wine rack easily mounts on a wall, table or cabinet. Decorate your interior with this chic shelf!

We make it with our own hands!

To work you will need: sheets of plywood, smooth wood nails, wood glue and leather strips. As tools will also be required drill and sewing machine.

Shelf made of wood and metal plates

Installation Guide

Bottle shelf on the wall

An original idea for a country house

From several wooden boards you can make a wine rack with your own hands, which is ideal as decor for a country-style kitchen. You can decorate the finished product to your taste and color.

Practical shelf

Wall mounted wine racks will give your kitchen an elegant look. If you are making a shelf with your own hands, then pay special attention to the strength and stability of the bottles so that they cannot fall.

Wine rack made of wooden pallets

Wooden pallets can be used to build almost any piece of furniture! Using a few wooden planks, you can easily build a simple wine bottle rack with shelves for bottles and glasses. This stand can be easily mounted on the wall, which is an excellent option for small apartments.

A practical idea for wine lovers

Wine racks with space for glasses are very practical because they replace your kitchen cabinet and combine the function of wine. 🙂

Make a simple DIY holder

All you need: colored tape, paper towel rolls and felt. This device will be a good addition to the kitchen. After all, the stand can be used for all different bottles.

A glass of good wine during a meal can not only lift your spirits, but also saturate your body. useful substances, vitamins and antioxidants. If you are a fan of European cuisine, you will probably completely agree with this statement. But any product or drink can retain its beneficial features only subject to storage rules. Meat - only in freezer, eggs in special trays, vegetables in the lower compartment of the refrigerator. Wine will require exactly the same “special” conditions.

Wine cabinet built into kitchen furniture

It is recommended to use shelves for wine bottles. Designed not only to fulfill their primary purpose - preserving a noble drink - they allow you to add some “zest” to the interior of a house or apartment.

The cost of this type of furniture is far from being at the level of chairs and stools. This is rather a kind of art, so be prepared to shell out a lot of money for quality product, or consider creating such a piece of furniture yourself.

The statistics cannot lie when they say that more than 91% of all wine bottles purchased are consumed within the first 24 hours. But a true wine connoisseur knows that the entire “life” of this amazing drink is a long, complex process that has embodied a whole science since ancient times, which continues to develop and improve to this day.

Direct sunlight, vibrations, humidity, temperature are the main factors that completely deprive a newly-minted sommelier of his hobby, which is the main reason for storing vessels with this drink in a special cellar, where the temperature is constant and the absence sunlight completely eliminates the oxidation process.

Special cabinet for home storage wines at the right temperature

Racks for storing homemade wine in the basement of a house

The owners are absolutely lucky country house who can afford to equip a real wine cellar, where they can enjoy the gifts of Dionysus all year round, sitting in front of the fireplace in the evening. But what should a person do who, being a connoisseur of the “art of wine”, is forced to live in an apartment where it is hardly possible to allocate space for specialized storage?

A similar question was asked at the end of 1976 by the French founder of the EuroCave company, which produces wine racks, specialized cabinets that allow maintaining the quality of a noble drink even in urban environments. But this applies, rather, to cabinets.

The wine rack is equipment for several other purposes. Therefore, returning to the beginning of the article, it is worth fully deciding on the purpose of purchasing a rack. Would you like your wine to mature in the kitchen? Then your choice is a closet to store it. Needed beautiful element decor or just a shelf for storing bottles, where a couple of semi-sweet red drinks will be waiting for the next celebration - make a wine rack!

An original honeycomb shelf for wine bottles for your guests

Types of wine shelves

They are divided by type of design, as well as the placement of wine bottles.

Convenient wine cabinet with drawers

Combined wine rack for horizontal and vertical storage

But the trend fashion trends, the cruel “invasion” of trends dictates to the consumer absolutely new, unimaginable, and in some places truly grandiose designs! By and large, such furniture is selected based on the design of the room where its further placement is planned. And folk craftsmen or creative personalities They make such shelves with their own hands, putting their soul into them, turning an element of the interior into a museum piece rather than furniture.

Wine rack in the kitchen for a small collection

What does the market offer us?

Industrial style stands. A cunning interweaving of wood and metal forms structures that are a little close to steam punk.
Mini bar, stand for wine bottles and glasses in loft industrial style
Floor racks of the “tree” type (when the bottles seem to grow from the trunk).
A wooden wine rack from Potterybarn fits well into this interior.
Standard shelving units based on clever design solutions. (Waves, squares, circles, triangles).
Unusual design solution bottle storage
Classic wooden floor, wall, slightly stylized honeycombs.
Interesting idea to create wooden rack for bottles with your own hands
Single or multiple shelves arranged in a special order on the wall.
Wine shelves – unusual decoration on the kitchen wall

The list goes on, taking into account the designer's flight of fancy.

Racks with wine - unusual interior solutions

Disadvantages and advantages of wine shelves

Small handmade decorative wine rack

As already mentioned, the main disadvantage of this type of storage is its absolute inability to store alcoholic beverages, observing all the basic rules. Here the wine will never “ripen” correctly, but can only be temporarily preserved until the next visit of the guests. Or play the role of handsome decorative element interior, harmoniously complementing its integrity, which is the main advantage, not taking into account the ease of access to any bottle.

The minibar in the living room allows you to properly and beautifully store your favorite drinks

The downside of the wine rack is, alas, not a cellar where you can go down on a special occasion, giving excursions for guests, sorting through all the pearls of your collection, as is usually shown in films.

The wine collection is perfectly located on small shelves-stands located on one of the walls

How to choose a rack?

Chic bar in the living room, allowing you to make cocktails for every taste

The only one the right decision, advice, recommendations are not and cannot be here. Wine storage stands are chosen solely based on personal preference. Do you like it when metal is combined with wood or stone? Or perhaps plastic construction from the hi-tech category? Do you want to place floor stand in the kitchen or honeycomb?

An unusually shaped wine rack located on the kitchen wall

What you really should pay attention to when purchasing this decorative element is the manufacturer’s brand, the quality of the materials used, and the assembly of the structure. No one will be pleased to look at a swaying, creaking shelving unit that, instead of aesthetic pleasure, brings only irritation and hatred of the “Chinese fake.” Or maybe the best option Will you create a wine rack with your own hands?

An original wooden stand for wine bottles fits easily under the stairs and adds zest to the interior.

Video: DIY wine shelf

Sections