Album I. Architectural, construction, sanitary and electrical drawings
104.0 m2 62.8 m2
Print the projectMirror reflection
- total area
104.0 m2 - Built-up area
130.0 m2 - Dimensions
10.0x13.0 m - Number of storeys
1 - Bathrooms and bathrooms
2 - Foundation type
prefabricated / monolithic strip - Exterior walls
foam blocks / aerated concrete + insulation - Floor type
floor slabs / wooden beams - Roof
metal tiles, flexible tiles, ondulin, etc. I. Architectural (dramatic) design
Included in the sketch architectural project a set of drawings is included, which is necessary for coordination with the relevant government agencies.
- Explanatory note (information about the customer, construction site, technical and economic indicators of the object, information about the materials used);
- House floor plans;
- Basement or ground floor plan;
- Ground floor plan;
- Plan of the second (attic) floor.
- Color solutions for facades;
- Incision;
- Roof plan;
- Foundation diagram (for reference).
Constructive decisions
Architectural and construction project, includes sections Architectural solutions And Constructive decisions, carried out on the basis of accurate calculations, which allows for a significant reduction in construction time and cost. This is achieved through rational consumption of materials, without multiple stocks; modern engineering and design solutions.
1. Underground structures
- Foundation layout diagram (formwork; block layout diagram, etc.)
- Foundation reinforcement schemes.
- Sections, sections and developments along foundations.
- Parts and components of waterproofing and insulation.
- Specification of materials and products.
2. Structures of the above-ground part
- Detailed floor plans for walls and partitions. Knots, details.
- Jumpers: components, details. Product specifications.
- Prefabricated floor plans, monolithic floors. Units, parts, reinforcement schemes.
- Monolithic sections, beams, belts. Units, parts, reinforcement schemes.
- Columns. Units, parts, reinforcement schemes.
3. Roof and roof structures.
- Scheme rafter system. Sections, nodes, details for the rafter system diagram.
- Specification of rafter system elements.
- Roof plan. Sections, components, details for the roof plan.
- Specification of roofing elements.
Engineering Communication
1. Water supply and sewerage (WW)
- Floor plans:
- Pipeline layout: cold and hot water supply; domestic sewerage;
- Arrangement plumbing fixtures and auxiliary equipment;
- Axonometric diagrams of water supply and sewerage systems;
- Water metering unit diagram;
- Specification of materials and products: taps, pipelines, sleeves, manifolds, fasteners, etc.
2. Heating and ventilation (HV)
- General instructions for the project;
- HVAC system plans showing:
- Locations heating devices;
- Pipeline sections;
- Elements of the ventilation system;
- Scheme of “warm floor”, “warm walls”
- Calculated hydraulic circuit heating systems indicating installation settings of valves;
- Axonometric diagram of the ventilation system;
- Piping units for heating devices and other units;
- Specification of boiler, heating and ventilation equipment.
3. Power supply and electric lighting (ES)
- Schematic diagram of the power supply and group network of the switchboard;
- Electric lighting network plans;
- Outlet network plans;
- Distribution network plans;
- Potential equalization network plans;
- Power electrical equipment;
- Roof plans. Lightning protection;
- Specification of equipment and materials.
Floor plans
Characteristics
Constructions
Project KO-144
Architectural solutions
Architectural design is a standard kit project documentation, necessary to approve the house project with the district administration and obtain permission to build a house on the allocated land plot
Full project home includes
A set of drawings on the basis of which the construction of a house is carried out. Contains detailed information about the technology and stages of building a house, from the foundation to the roof ridge. Consists of design drawings, assemblies and parts, statements and specifications of materials for purchase.
Includes sections: water supply and sewerage, heating and ventilation, electricity supply. Allows you to select suitable characteristics at the design stage engineering equipment and calculate effective communications laying schemes.
Additional changes to the project
Project preparation time
2-3 days.
Free delivery to the Republic of Belarus and the Russian Federation
What is included in a house project? What documents are needed to build a house?
Project documentation for the construction of a house consists of:
— Architectural project — section “Architectural solutions” (AR);
— Construction project — includes the section “ Constructive decisions"(KR);
— Sections engineering communications— Heating and ventilation (HV), water supply and sewerage (VK), electricity supply (ES).
The “Architectural Solutions” (AR) section is required for approval of the project in local executive bodies and development of the Development Project land plot, which includes the General Plan of the site. The section “Constructive solutions” is necessary directly for construction, because contains information about the technology of construction and design of foundations, walls, window and door lintels, floors, and roofs.
Are utility sections necessary for building a house?
Availability of engineering communications sections in addition to Construction project allows you to determine as accurately as possible before the start of construction the final cost of building a house without taking into account interior decoration. Of course, the standard layout of communications is not always suitable for clients who want to think through their own interior design. Therefore, even for ready-made projects from the catalog, sections of engineering communications are developed individually, based on the standard terms of reference. Moreover, the cost of such a project is lower than for individual project, due to reusability.
I need a gas project, can you develop it?
The development of design documentation for gas supply to a residential building is carried out by specialized organizations that have the license and permits necessary for this type of activity. To select such an organization, in order to avoid future problems when approving the project, it is better to contact the administration of the construction area.
How to purchase a ready-made house project?
In order to buy the finished house project you like, you need to place an order (leave a request with contact information) on our website in any form convenient for you. The easiest option is to click the “Order a project” button to the right of the floor plans. At the same time, you can also select the necessary sections of the project and indicate the desired changes in the project. After this, a specialist from our company will contact you and clarify additional details. As a rule, we will need passport data to conclude an agreement and issue an invoice for payment. We will also need information about the owner of the site to complete the project. After payment you will be sent the ordered project documentation.
What changes can be made to the project?
It is possible to make any changes to finished projects. The cost of project changes depends on the volume of required adjustments and can be announced to you after their discussion. Minor changes such as location and dimensions window openings, the installation of additional partitions or the transfer of existing ones can be made by the Developer independently during the construction process, without registering changes to the project.
What is the best thing to do: choose a project yourself on the website, or come to the office for a consultation?
All ready-made house designs that are currently available for order are presented on the website. If you visit our office to select a project, you will still have to select it from the catalog on the website. We do not store projects in printed form, because... Each project is designed individually in accordance with the developer's documents. Based on the practice of our clients, it is more convenient to take time and familiarize yourself with the catalog on the website in a relaxed home environment.
How quickly can I receive a house project after placing an order remotely?
If you are planning to buy finished project without changes, our specialists, within 1-2 days, will prepare a project and organize its delivery by courier service to the door of your home anywhere in Belarus, Russia and neighboring countries.
The period for preparing a project with changes depends on the volume of required adjustments, and can take from 2 to 10 days.
Project Z144 is designed as a one-level house with a garage for two cars. The style combines classic architecture and modernity. The attic provides space for arranging your own world. Using it and expanding the living space allows you not to rush with construction work, but to do it thoroughly, step by step.
The benefits of the Z144 design are obvious to people who prefer to have only one floor in their home. kitchen share closed sample fences off everyday details from the relaxation space. It is located on the garden side, with access to the terrace nearby. This design helps set the table for dinner or have a tea party outdoors. The terrace is not fully covered; the portion under the roof is quite suitable for relaxing near the house during the warm season.
Large-scale glazing is the key to optimal daylighting of the internal home space, forming unity with the external natural world. The kitchen has a built-in pantry. This is mainly with practical side when storing supplies and kitchen appliances. The bathroom and laundry space are connected to each other, which increases the comfort of the home.
All bedrooms communicate with the terrace, this increases illumination, adds comfort and modernity. One has its own small bathroom. The owners can use it as a common one if there is such a plan.
The house communicates directly with the garage building; with this layout, moving objects from the car to the home is faster and more convenient. Behind the garage there is a technical storage room for storing technical equipment, devices, and fixtures. Its volume can be varied according to the wishes and needs of the owner.
Foundation- prefabricated monolithic, strip (monolithic reinforced concrete base, FBS blocks).
Base- facing with porcelain tiles.
Exterior walls- blocks of cellular concrete B3.5 D600 with a thickness of 380-400mm. with plastered facades. (cellular concrete blocks can be replaced with any other construction material, taking into account compliance with the thermal properties of external walls).
The material and thickness of the insulation depends on climatic conditions and wall materials (indicated in the project, taking into account your region).
Domestic load-bearing walls
- sand-lime brick M100
Partitions- blocks cellular concrete/ brick/ porous brick.
Interfloor ceilings- hollow reinforced concrete slabs.
Roof- pitched. The covering is at the discretion of the customer, the rafter structures are wooden.
Porch and balcony fencing- wooden.
Ladder- individual production according to the “metal stringers, wooden steps” scheme.
Protruding trim truss structures(cornices, wind board)- profiled sheet with polymer coating/ siding.
Composition of the A-144-2 project
General scheme set of speakers (AR+KR).
The final number of project sheets depends on the volume of the house and its features.
1.General information (Specification of wall materials, list of project sheets, description)
2.Plans (architectural/masonry)
3. Facades (with marks and “color spots” of the cladding)
5. Section(s) (according to characteristic parts of the building)
6. Foundation (Foundation strip diagram, order of wall blocks (even/odd rows for houses without a basement), reinforcement diagrams, specifications)
7. Statement, marking and specifications of jumpers.
8. Layout plan for floor slabs. (assemblies, specifications)
9.Roof plan.
10. Layout of truss structures with specifications.
11. Roofing units.
12. Ladder ( Hardware stairs, units, parts, specifications)
13.Options for floor designs
14. Other characteristic components and parts
The indicated price for the project presented above includes:
House made of timber "Under the roof"
Short description:
1) Designing a house.
2) Installation of the foundation.
3) Delivery to the customer’s site.
4) Assembly of the wall house kit.
Detailed description:
1) Designing a future home is the most important step in construction! The strength and reliability of the future structure will depend on the correctness of the calculations. In order for a house to last for decades and delight its owners, everything needs to be carefully thought through at the design stage.
You will be required to be fully involved in the process and constantly discuss and approve details.
It is better to spend time at the design stage than to lose many times more time and money at the construction stage!
Take care of your safety at initial stage construction – entrust the development of project documentation to professionals!
2) Foundation:
Topographic survey (geodesy) site marking.
Geological studies of soil.
Bored piles 250x250x2000 (h) mm.
Monolithic reinforced concrete grillage 300x400 (h) mm.
3). Delivery to the customer's site:
Internal and external walls, roof structure (truss), roofing (finish flooring), other materials such as jute necessary for assembling a house kit.
With unloading by crane board on site.
All lumber arrives packaged in specialized protective packaging.
4). House wall kit:
1. Design drawings. Documentation required for registering a building with the BTI. Explication of premises.
2. Production of timber using high-precision equipment. Northern forest of the Perm region.
3. The size of the timber is 200×185. Internal partitions made of timber 200×185.
4. Unloading the log house at the construction site. Rolling out and preparing the walls for the assembly of the log house.
5. Assembly of the log house by an experienced and qualified team.
6. The timber is assembled onto wooden dowels at the connecting points and along the length of the timber according to the house assembly technology.
7. Inter-crown insulation - flax fiber.
8. Complete set and assembly with special fasteners: staples, tapes, knitting needles, jacks (shrinkage compensators).
9. Floor joists: material timber 100×200. Installation of logs in 60 cm increments (under the insulation).
10. Ceiling joists: material timber 50×200. Installation of logs in 60 cm increments (under the insulation).
11. Gables made of timber with a cross-section like a wall kit.
12. Technical supervision for quality control of material and installation work, working on the customer's side!
13. Treatment of wall mass and lumber with a fire-bioprotective composition.
The development of "Z144" is a project one-story house with a garage for two cars and the possibility of creating an attic floor.
The design of a one-story house will certainly attract the attention of adherents of the practicality of one-level interiors. Fully closed kitchen will hide the features of the owner’s life from the rest of the daytime area. The location of the kitchen on the courtyard side and the presence of an additional exit to the terrace near the kitchen is very convenient for organizing breakfast, lunch or dinner on fresh air without leaving home. Some covered part of the terrace will serve great place For summer holiday near the house. Sufficient glazing areas in the day area will guarantee excellent natural light in all rooms throughout the entire daylight hours and create an indescribable feeling of harmony with surrounding nature. Utility room located behind the garage, for two cars, convenient for use and storage gardening tools and other equipment, and also contains laundry equipment. If necessary and desired by the owners, it can be reduced or increased in size. A direct transition from the house to the garage through a passing vestibule will make it easier to unpack and carry purchases from the car. The pantry located in the kitchen is practical enough to store essential kitchen appliances and supplies. Spacious bathroom for maximum convenience connected to the laundry room. One of the two bedrooms has a small private bathroom and access to the terrace. At the request of the customer, it can be redesigned into a bathroom common use. The second, smaller bedroom also has access to the terrace, making it more comfortable, bright and modern. The presence of the possibility of arranging an attic will help increase the living space, and will also give the opportunity to conduct construction works gradually, whenever possible.