Lemax premium series boilers. Floor-standing gas boilers Lemax 40 technical characteristics
Characteristics
Shipping and payment
Installation and service
Reviews 0
Spare parts
Characteristics
The steel convection non-volatile gas atmospheric boiler Lemax Premium 40 is designed for heating apartments, residential buildings, cottages and administrative buildings equipped with a water heating system with natural circulation. With standard house insulation, a power of 40 kW is enough to heat a house for about 400 square meters. To remove combustion products, a chimney with a diameter of 140 mm is required. The Premium 40 model runs on natural gas and comes in assembled form with a gas burner device based on Italian automatic equipment 820 NOVA. Advantages of a boiler with gas valve 820 NOVA SIT: the temperature regulator is located on the front panel of the boiler with temperature indication, which allows you to accurately select the optimal thermal mode; connection room thermostat(optional), with which you can regulate the boiler temperature relative to the indoor temperature; work together with a turbo nozzle for forced removal of exhaust gases (optional); soft start system. In the production of Lemax Premium series boilers, high-quality steel 2 mm thick, grade DC01, is used, which allows you to operate the device much longer. An open combustion chamber implies a method of forming a combustible mixture - air is taken from the room, and combustion products are removed naturally due to the draft created by a stationary vertical chimney. Lemax Premium 40 meets all safety and environmental requirements established for this type of product.
Peculiarities
- The unit does not require connection to the electrical network
- Starting is carried out using the piezo ignition button
- Equipped with original components of the gas burner device and a gas valve from the Italian concern SIT, as well as a POLIDORO injection microtorch burner
- Availability of a protection system against overheating, draft interruption, soot formation, as well as against boiler blowing out
- Ease of boiler maintenance due to the use of removable cladding elements and profile equipment;
- Ease of cleaning the boiler due to the use of a removable top panel
- Advanced safety protection system (heat exchanger overheat sensor installed)
- Maximum efficiency due to: increasing the heat exchange area, changing the design of the turbulator for maximum retention of exhaust gases
- Increased primary and secondary air flow
- Possibility of switching to liquefied gas (optional)
- The body is made of high-quality steel 2 mm with increased flatness
- The heat exchanger has a cylindrical shape, which allows the boiler to operate in closed systems with operating pressure up to 1 atm
- Thanks to the coating anti-corrosion enamel CERTA (exposure temperature 750°C) and treatment with an inhibitory compound, the heat exchanger is protected from aggressive factors: salt solutions, mineral oils
Specifications
Boiler type Gas
Mounting method Floor
Combustion chamber type Open
Thermal power, kW 40
Natural gas Yes
Liquefied gas Yes
Chimney diameter, mm 140
Steel
Non-volatile Yes
Manufacturer Russia
Boiler type Gas
Operating principle Convection
Number of circuits Single circuit
Mounting method Floor
Combustion chamber type Open
Thermal power, kW 40
Natural gas Yes
Liquefied gas Yes
Chimney diameter, mm 140
Primary heat exchanger material Steel
Non-volatile Yes
Manufacturer Russia
Gas pipe diameter, inch 3/4
Diameter of connected pipes, inch 2
Vacuum range, Pa 4 - 40
Coefficient useful action,% not less 90
Maximum outlet water temperature, °C 90
Boiler weight, no more, kg 92
Nominal gas pressure, Pa 1300
Heat exchanger volume, l 62.4
Heat removal area, m2 1.9
Average gas consumption, m3/h 2.25
Flue gas temperature °C, not less 110
Type of gas burner device GGU 45
Height, mm 1016
Depth, mm 608
Width, mm 532
High reliability
In Lemax Premium series gas boilers, installation work, operating instructions, commissioning, preventive maintenance and equipment repairs are carried out only by specially trained, qualified personnel service centers or local government employees gas industry in accordance with the “safety rules for gas distribution and gas consumption systems”, according to the boiler installation project. Checking and cleaning the chimney, repairing and monitoring the water heating system are carried out by the boiler owner. In the room in which the presented model is installed, it is necessary to provide natural ventilation. To convert this equipment from natural to liquefied gas, you will need a “conversion kit” (nozzle + injector). You cannot use injectors (nozzles) designed for natural gas to operate on liquefied (propane-butane) gas, as this leads to improper combustion and failure of the boiler.
floor-standing gas single-circuit boiler with an open combustion chamber and built-in burner
About delivery
- Delivery is carried out on weekdays from 12:00 to 18:00 Moscow time
- Delivery outside the Moscow Ring Road is 50 rubles/km and is paid according to the actual distance traveled by the vehicle. We recommend finding out the exact distance using the Yandex.Maps service
- Delivery over a distance of more than 130 km from Moscow is carried out through transport and logistics companies
- Delivery on weekends holidays, urgent delivery same day, order delivery at exactly the specified time is carried out at increased rates and after agreement with the store
- When the order is delivered by truck, the goods are unloaded by the Buyer
- Approximately 1 hour before delivery, the forwarder contacts the Buyer. If it is impossible to confirm the acceptance and delivery of the order to the designated address, delivery is canceled
- Pickup is carried out after the store confirms the movement of the goods to the point of delivery of the order.
- The forwarder does not advise on issues technical parameters And functional features goods, their compatibility, cost, etc. This information can be obtained by calling our office at contact numbers
- Our vehicles deliver orders along pre-planned routes according to a schedule that provides high accuracy. Therefore, we ask you to understand that unloading, checking and payment for goods must be completed within 10-15 minutes
About payment
- We accept payment for goods only in rubles for cash or bank transfer
- The price of the goods includes a VAT rate of 20%
- The order is sent to the regions of the Russian Federation through transport companies to the Buyer only after 100% prepayment
- The exact cost of payment is calculated from the cost of goods and delivery costs (outside the Moscow Ring Road, for urgency, for exact time delivery) of the order. Please take this into account
Installation
Our company’s specialists carry out a paid visit to the site, and the cost of the visit is returned upon conclusion of the contract; on the spot, they agree with you on the terms, stages and scope of work, and select equipment and components.
After concluding the Agreement and making an advance payment at the appointed time, delivery, installation and commissioning of equipment is carried out. Upon completion of the work, Certificates are drawn up and full payment is made.
Prices for visiting a specialist and installing equipment can be found here.
Service and repair
At your request, the company is ready to conclude an annual service agreement with you. The advantage is an extended warranty for work performed and preferential servicing of equipment.
If such an Agreement has not been concluded, you can contact the specialized service centers using the link.
For heating residential and non-residential premises, medium and large areas, floor-standing gas boilers are most often used. They are among a huge range of heating equipment, which also includes solid fuel, diesel and electric boilers, have a low cost of ownership. It consists of the relatively low price of the floor coverings themselves. gas boilers heating, inexpensive service and fuel efficiency, i.e. gas.
It is often difficult for a buyer to figure out on his own what kind of domestic boiler he should buy. An independent review of the equipment market, reviews of other consumers, and advice from professionals will certainly lead him to the conclusion that he needs to buy the product domestic manufacturer– floor-standing gas boilers “Lemax”.
Our company is ready to offer favorable prices, And a wide range of products manufactured according to modern technologies using components from leading global manufacturers. In particular, on heating boilers Lemax installs a gas burner device based on SIT safety automation. It ensures stable operation of the boiler and gas savings.
The Lemax enterprise produces several types of floor-standing gas boilers:
- - intended only for heating premises.
- - also allow you to provide heating of water for domestic needs.
- - with the ability to connect a tank indirect heating and remote control units.
Without exception, all products are different high quality and trouble-free operation for a long time. Correct operation equipment and the prompt elimination of possible malfunctions in its operation are guaranteed by an extensive network of service centers. In almost all regions of Russia, they provide not only warranty, but also post-warranty maintenance of boilers, as well as resolution of all issues related to the purchased equipment.
Where to buy Lemax floor-standing boilers
We invite you to buy Lemax floor-standing gas boilers directly in our online store or contact a dealer in your region.