Boxes for computer cables. Cable channels for the table

Agree, wires, cables and extension cords are the most annoying things in the house. They create a feeling of clutter, make cleaning difficult and sometimes even pose a threat to our safety because they are so easy to trip over! Ideally, the problem of wires should be solved at the renovation stage: you need to wall up everything that is possible in the walls and cable channels, and also carefully plan the placement of sockets. But if it’s too late to ditch the walls, it doesn’t matter, because there are at least 6 ways to hide the wires. Be sure to try them and you will see how your home will be transformed.

Solution 1. Hiding the extension cord in a decorative box

An unsightly extension cord with a bunch of wires can be hidden in a box with holes cut out on the sides and a lid. It's cheap, simple and practical. There is only one downside - homemade cutouts may not look very neat.

Tip: You can use wicker baskets instead of boxes.

Solution 2. Hide the wires in a special box

Unlike decorative boxes special boxes for extension cords and cables look neat from all sides, so they can be placed next to the computer, TV, on the desktop or on the bedside table.

Clue:

• Finding boxes is not a problem. For example, Ikea sells two models - standard type and in the form of a bag. Cable organizers for wires can also be purchased at Ozon, as well as in hardware stores.

Solution 3. Fix the wires with clips

To organize the chaos of wires lying on the floor or table, secure them to the wall or furniture frame with special clamps.

You can secure the wires using a furniture stapler.

Tips:

• Cable clamps are sold at hardware and hardware stores;
• To avoid confusion, all wires should be marked with homemade labels as in the photo below.

• It is better to use inconspicuous transparent clips, for example, from Command, as in the photo below.

Solution 4. Collect cables in a holder under the table

If you collect all the wires under the table, they will not be visible, and the table will be in complete order.

You can buy this cable holder at Ikea.

Solution 5. Cover the cables with a plastic box

This solution is especially relevant for masking wires near the TV.

Hint: Ideally, the box should be painted to match the color of the wall.

Solution 6. Hiding the extension cord behind the furniture

This can be done using adhesive hooks or good double-sided tape.

The system unit, monitor, landline telephone, scanner, lamp, printer have become familiar attributes of the workplace. Each of these devices comes with a wire for connecting to the network, as well as a cord for connecting to a computer. Their arrangement is not always ordered, which leads to twisting, bending, and deformation. And this is fraught with malfunctions in the operation of office equipment. A cable channel for the table will help you neatly secure all the power cords; you can buy it at a reasonable price on the website.

A tidy office table is the key to a fruitful solution to assigned tasks.

Modern furniture is ergonomic. It has mechanisms for lifting and changing the angle of inclination. Manufacturers offer a wide variety of accessories designed for rational organization of the area. labor activity and maintaining it in proper order. Thanks to them, it is optimized manufacturing process. An employee working at a PC does not need to make unnecessary movements. His actions are targeted, which helps to increase their effectiveness. One of them is a cable channel on the tabletop, through which electrical wires are distributed in a given direction, without tangling or bending.

The range includes various models:

• In the form of a metal tray square shape with a pair of hooks on each side.
• Horizontal rectangular configuration. Their frontal surface is rounded. In the central part there is a special fastener with blocking.
• Sliding. The main gutter is equipped with a retractable part that allows you to adjust its length to the size of the electrical cords being laid.
• Flexible for vertical placement. Their structure resembles a spine.

In any of them you can hide from prying eyes not only the electrical cable, but also the surge protector and router. Some people think that the cable channel is for computer desk- ordinary plug. This is a misconception. A blanking pass closes the hole through which the conductors pass electric current. And in the channel tray they are laid parallel to the tabletop plane or perpendicular to it. At the same time, their static nature is maintained, regardless of the body movements of the person engaged in the execution. official duties person. They are not touched by the technician when carrying out wet cleaning of the room. They do not interfere with the movement of office workers and visitors.

Advantages

The positive aspects of using a vertical cable channel for a table and its other varieties are obvious.

• Frees up legroom.
• The service life of conductive equipment is extended.
• Electrical appliances operate in a safe mode.

To install them under the tabletop, small niches/recesses are formed in furniture pieces of the latest generations. If there are none, then installation is carried out directly under the cover. It is not complicated and the user can complete it independently.

Are you having trouble choosing? Call us! Competent managers will provide detailed information on all issues that interest you. We sell goods on favorable terms. Impeccable quality guaranteed!

The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.

There are also ready-made solutions, such as Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on top for cables, and inside there are three fasteners that can be used to wrap cords that are too long. The Plug Hub can be placed on the floor or mounted on the wall.

2. Secure the wires under the tabletop

To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then secure the binders in the required places using screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.

There is a simpler option if you don't need to hide a large number of wires This will require construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires, it is better to use special clamps (for example, these).

Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back side countertops, and then attach the extension. To prevent the wires from dangling under the table, run them through cable channels - they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.

3. Organize your cable storage

Organizing them correctly will help you get rid of tangled wires. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.

If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.

If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:

4. Keep all necessary wires at hand

We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that if necessary, you can reach out and connect the device to the desired wire. Sugru will help us with this - plasticine-rubber and one of the most irreplaceable things in the household. Don't believe me? Then take a look.

Roll Sugru into small balls and place on a table support. Then use a utility knife to remove some of the plasticine (be careful, try not to deform the balls too much). Life hack: to prevent the plasticine from sticking to the blade, first rinse it with soapy water. Then adjust the shape a little with a sushi stick or toothpick to create neat hollows (they should be slightly wider than your wires). Everything is ready, you can fix the cables.

There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on your desktop.

The simplest solution is to pass the wires through binders attached to the tabletop.

5. Don't hide wires

Seriously, if you get creative with it, cables can be an interesting decorative element.

The day before, everyone tries, if possible, to foresee the location of office equipment and move it under it. But what if you change provider and the new operator installed your own modem, and this requires additional cable wiring, or you simply moved the location to another room? Don’t just ditch all the walls again, because you can be creative and hide the unsightly cable. In the editor's review of the site there are 5 simple, but effective ways how to hide wires and office equipment in any room, turning them into a unique art object. It's time to eliminate all imperfections and bring the most non-standard ideas to life.

The simplest solution is to install, which today are offered in a wide variety of sizes and shades, but this is too simple. Shouldn't we use decorative clips as fastenings, which will additionally hold and guide the cable? Cute clamps in the shape of leaves and birds are on sale; camouflage covers are also produced in the same theme, which can be decorated with bright stickers or drawings.

You can group the wires on the wall in the form of a decorative tree with lush foliage, here artistic skills or will come to the rescue. In a few minutes, the cable will turn from a chaotic tangle into a blooming garden.

You can play around with a cable running along the walls decorative fence, and in order for it to lie neatly behind it, you should first secure the wires with zip ties or hook holders with adhesive base. In addition, the fastening can be made from ordinary Velcro, choosing a color that matches the interior.

Turn wires into art objects

If the length of the wires is very large, and you do not plan to replace them with shorter ones, you can make a real one on the wall, which will immediately attract attention. This design will fit perfectly into a vintage, retro or design; for this you will need a minimal set of tools and fasteners.

Add creativity: simply decorate the cable with a bright ribbon, beautiful beads or thick rope - here you can show your imagination to the maximum, it all depends on your creative abilities. In any case, the wires will be grouped in one place, and not just randomly scattered around the room.

How to secure wires near a desktop

If installed against a wall, you can cover the hanging wires with a beautiful curtain, panel, or secure them with decorative hammocks. For an extension cord that is constantly getting in the way on the floor, a small box is suitable; it will also protect it from dust. Be sure to make several holes in it to bring the cable out.

If you are a device lover, interesting idea for grouping wires - installation on work surface decorative stand in the form of an electrical tower. You can also put an unusual box on the table with holes for the output of wires, which can be easily connected to the equipment at any time. It won’t take up much space, but at the same time, it will hide the clutter and allow you to conveniently organize chargers for gadgets and headphone cables.

New products from manufacturers for fastening wires

Manufacturers help solve the problem of wires around and produce original new items. We invite you to familiarize yourself with interesting inventions.

• a set of holders for fixing wires, which contains clamps and Velcro of different parameters;
• screen with holders for office equipment wires. You can fix it on the back or side wall of the desktop;
• install under the countertop additional shelf, and even better - buy a special separator, with which the wires will always be in order. If necessary, you can remove one of them without affecting the others.

How to hide office equipment in the interior: 5 non-standard solutions

Printer, copier, scanner - such a set of office equipment can be found in almost every home. There is not always room for a fully organized work office. Here are some tips from professional designers to help:

• movable or module with shelves that can be put under the table and rolled out if necessary. The equipment will not take up space on the desktop and attract attention;
• decorative for the printer, in which you need to make holes for wires and paper. It will look very impressive on your desktop or nearby. If a wicker product is not suitable for the interior of the room, you can cover the printer with a beautiful box;
• you can place the printer in a desk drawer or chest of drawers;
• install an additional shelf under the table and place the printer on it. It is necessary to provide its location in such a way that there is no discomfort for the legs;
• disguise the equipment as books by installing it open next to the desktop. Beautiful bindings and folders will distract attention.

Or maybe it's time to purchase improved equipment? After all, printing is no longer so relevant; now it is much more convenient to use a scanner and send documents over the Internet. Therefore, instead of a photocopier and a printer, you need one scanner; it takes up much less space and can easily fit in a desk drawer.