Automatic proportional dosing complex pentair international. Pentair components
The control units allow you to wash the fast filter loads with a reverse flow of water (from bottom to top), a direct flow of water (from top to bottom), wash the reagent by sucking it through the built-in ejector, and automatically fill the reagent tank with water. The blocks consist of valves that turn on, turn off and redirect the flow of water, and a controller that ensures the operation of the valves, that is, it sets the sequence for switching flows.
The design of valves in control units changes: the direction of water flow is changed by switching valves that open or close the channels. The valves, under the influence of cams located on the cam shaft at the top of the control unit (not in the water, but outside), rise or sit on the seat, ensuring the opening or closing of the channels. With this design, all kinds of contaminants (including sand) passing with water through the channels of the control unit cannot damage it. This is what it's all about fundamental difference Pentair valves from similar products from other manufacturers - they have no rubbing parts.
Control units are made of Noryl (a thermoplastic patented by GE Plastics). Valves can be divided into two groups according to their operating principle:
- The filter valve is three-cycle (operating mode, backwash and quick wash). This group includes valves of the Performa 263, Magnum Cv F, Magnum IT F series.
- The softener valve is five-cycle (operating mode, backwashing, chemical regeneration, direct washing, filling the regenerant tank). This group includes valves series 255, Performa 268, Performa Cv 278, Magnum Cv SN, Magnum IT SN.
Pentair control valves use Various types controllers:
- With regeneration based on the results of time clock control. The frequency of regeneration is determined by the user, based on the quality of water and the nature of water consumption. Regeneration cycles are fixed.
- With regeneration based on the results of monitoring the volume of water passed through the filter (demand). A microprocessor connected to a turbine and a sensor calculates a schedule of water consumption by day of the week and schedules washing on the day when the filter’s loading resource is exhausted. Customizable regeneration cycles.
All control units are tested to operating pressure from 1.4 to 8.3 atm.
Interface type - LCD.
Optionally they can be equipped with electrolytic chlorine generators (art. 35626) for resin disinfection.
The control units allow you to wash the fast filter loads with a reverse flow of water (from bottom to top), a direct flow of water (from top to bottom), wash the reagent by sucking it through the built-in ejector, and automatically fill the reagent tank with water. The blocks consist of valves that turn on, turn off and redirect the flow of water, and a controller that ensures the operation of the valves, that is, it sets the sequence for switching flows.
The design of valves in control units is as follows: the direction of water flow is changed by switching valves that open or close the channels. The valves, under the influence of cams located on the cam shaft in the upper part of the control unit (not in the water, but outside), rise or sit on the saddle, ensuring the opening or closing of the channels; All kinds of contaminants (including sand) passing with water through the channels of the block controls, with this design they cannot damage it. This is the fundamental difference between Pentair valves and similar products from other manufacturers - they have no rubbing parts work environment(that is, in water).
Control units are made from Noryl (a thermoplastic patented by GE Plastics)
Valves can be divided into two groups according to their operating principle:
1. Filter valve - three-cycle (operating mode, backwash and quick wash). This group includes valves of the Performa 263, Performa Cv 273, Magnum Cv F, Magnum IT F series.
2. Softener valve - five-cycle (operating mode, backwashing, chemical regeneration, direct washing, filling the regenerant tank). This group includes valves series 255, Performa 268, Performa Cv 278, Magnum Cv SN, Magnum IT SN.
Pentair control valves use different types of controllers:
1. With regeneration based on the results of time control (time clock). The frequency of regeneration is determined by the user, based on the quality of water and the nature of water consumption.
Regeneration cycles are fixed.
2. With regeneration based on the results of monitoring the volume of water passed through the filter (demand). A microprocessor connected to a turbine with a sensor calculates a schedule of water consumption by day of the week and schedules washing on the day when the filter loading resource is exhausted. Customizable regeneration cycles.
All control units are tested for operating pressure from 1.4 to 8.3 atm.
Interface type - LCD.
Optionally they can be equipped with electrolytic chlorine generators (art. 35626) for resin disinfection.
Filter control unit
Softener control units:
1. By timer
PentairWater is one of the most well-known companies in the global market for products used for water treatment and water purification. The company is constantly developing technology, developing and producing innovative products, improving existing methods and technology. A wide network of partners in a variety of areas: from research centers to partners selling products around the world, and high standards qualities allow PentairWater to be one of the leaders among suppliers of technologies and equipment for water purification in industrial and domestic water treatment.
Pentair Water control valves are available under a variety of brands. A control valve is a type of water treatment equipment used in column-type rapid filters. The main function of the control valve is to control water flows. It is a multi-way switch with a manual or electromechanical drive and all the necessary automation. Its purpose is to switch the flow of purified water filtered through the filter medium to ensure timely regeneration of the filter medium. There are valves that allow regeneration of the filter media depending on the volume of purified water or at a given time.
Depending on the type of media used in the filter, valves are used that allow regeneration of the filter media by washing with a reverse flow of water or a special reagent. Table salt or potassium permanganate can be used as a reagent. In case of using a load that requires regeneration with a reagent, five-cycle control valves are used with the following switchings:
- Filtration
- Backwash
- Regeneration
- Direct flush
- Filling the reagent tank with water
In the case of using a filter media that requires only periodic backwashing, three-cycle control valves are used:
- Filtration
- Backwash
- Direct flush
Column filters according to the type of filter media are divided into the following groups:
- Sedimentary – for mechanical cleaning
- To remove iron and manganese
- For deferrization and pH correction
- For removal of iron, manganese and hydrogen sulfide
- For sorption purification
- To soften water – remove calcium and magnesium salts
Geyser Group of Companies is one of the leaders Russian market water treatment, uses a number of PentairWater items in its offer to the water treatment market. This is due to the high reliability of the products.
When designing, depending on the objectives of a specific project, the engineering service of the Geyser company will select the optimal equipment taking into account all the requirements of the project. Practical experience and deep knowledge of Geyser design department specialists, as well as a large number of previously implemented projects, allows you to solve practical problems for design and installation, maintenance, modernization and reconstruction of water treatment systems at facilities of any required capacity.
The company is one of the world market leaders in the development and production of innovative products and systems used throughout the treatment, supply and storage of water. The company's activities and success are based on criteria such as continuous development of new products, high productivity, competence, corporate ethics and the desire to lead the market. The company's personnel have such qualities as a serious approach to their work, respect for people and environment, and is also armed with deep practical knowledge in his field of production. Strong relationships with customers and high quality standards allow us to be considered one of the main manufacturers of water treatment technologies and equipment.
Water softeners Pentair Water
FILTER MATERIAL: Strong acid gel-type cation exchange resin in Na-form based on sulfonated polystyrene.
FEATURES: Immediate or delayed regeneration of the filter medium. Alternating the working process and the regeneration cycle (restoring the ion-exchange capacity of the resin). Regeneration of the filter material can be carried out automatically based on a signal from the built-in timer (once per specified number of days) or built-in counter (based on the volume of water passed through).
DESCRIPTION: The water softening installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, a drainage distribution system, and a reagent tank.
PRINCIPLE OF OPERATION: Water softening is based on the exchange of hardness salt ions (calcium and magnesium) for sodium ions as it passes through a layer of ion exchange resin. Once the exchange capacity is depleted, the cation exchanger loses its ability to soften water and must be regenerated. Regeneration of Na-cation exchanger is achieved by filtering a solution of sodium chloride (table salt) with a concentration of 5-8% through it.
Periodic water softening units Pentair Water FS series with FLECK control valves
Periodic water softening filter with timer regeneration. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.
Model |
Production, m3/h |
vendor code |
price, rub. |
FS 50-08T |
0-25-0320 |
24438,40 |
|
FS 77-08T |
0-25-0070 |
26335,75 |
|
FS 50-09T |
0-25-0340 |
25486,65 |
|
FS 77-09T |
0-25-0072 |
27384,00 |
|
FS 50-10T |
0-25-0360 |
28133,70 |
|
FS 77-10T |
0-25-0074 |
30031,05 |
|
FS 50-12T |
0-25-0380 |
31724,00 |
|
FS 77-12T |
0-25-0076 |
33621,35 |
|
FS 50-1ZT |
0-25-0390 |
34407,10 |
|
FS 77-1ZT |
0-25-0078 |
36304,45 |
|
FS 77-14T |
0-25-0080 |
44346,40 |
|
FS 77-16T |
0-25-0082 |
54992,35 |
|
FS 28-18T |
1-25-8320 |
88054,05 |
|
FS 28-21T |
1-25-8330 |
106442,70 |
|
FS 28-24T |
1-25-8340 |
129,568,25 |
Periodic water softening filter with water meter regeneration. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C 24 V, 50 Hz.
Model |
Production, m 3 / h |
vendor code |
price, rub. |
FS 50-07M** |
0-25-8430 |
26707,10 |
|
FS 50-09M* |
0-25-0190 |
32225,20 |
|
FS 50-08M |
0-25-0510 |
28642,60 |
|
FS 77-08M |
0-25-0582 |
28568,75 |
|
FS 50-09M |
0-25-0530 |
29690,85 |
|
FS 77-09M |
0-25-0584 |
29617,00 |
|
FS 50-10M |
0-25-0550 |
32337,90 |
|
FS 77-10M |
0-25-0586 |
32264,05 |
|
FS 50-12M |
0-25-0570 |
35928,20 |
|
FS 77-12M |
0-25-0587 |
35854,35 |
|
FS 50-13M |
0-25-0580 |
38611,30 |
|
FS 77-1ЗМ |
0-25-0588 |
38537,45 |
|
FS 77-14M |
0-25-0590 |
46579,40 |
|
FS 77-16M |
0-25-0595 |
57225,35 |
|
FS 28-18M |
1-25-8350 |
111307,70 |
|
FS 28-21M |
1-25-8360 |
129695,30 |
|
FS 28-24M |
1-25-8370 |
159091,80 |
Continuous units Pentair Water TS series with FLECK control valves
PURPOSE: Removing hardness salts from water.
FILTER MATERIAL: Strong acid cation exchange resin of Na-form gel type based on sulfonated polystyrene.
FEATURES: Continuous supply of softened water. Regeneration (restoration of the ion-exchange capacity of the resin) of the filter material is carried out automatically according to the signal from the built-in counter (based on the volume of water passed through).
CONTROL: Programmable electronic unit.
DESCRIPTION: The installation consists of two buildings, a control unit, a filter medium, a supporting layer of gravel, a drainage and distribution system, and a reagent tank.
PRINCIPLE OF OPERATION: Water softening is based on the exchange of hardness salt ions (calcium and magnesium) for sodium ions as it passes through a layer of ion exchange resin. Once the exchange capacity is depleted, the cation exchanger loses its ability to soften water and must be regenerated. Regeneration of Na-cation exchanger is achieved by filtering a sodium chloride solution with a concentration of 5-8% through it.
Water softening filter continuous action with regeneration by water meter Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C 24 V, 50 Hz.
Model |
Production, m 3 / h |
vendor code |
price, rub. |
TS 91-08M |
0-25-0840 |
45167,85 |
|
TS 91-09M |
0-25-0860 |
47264,35 |
|
TS 91-10M |
0-25-0870 |
52558,45 |
|
TS 91-12M |
0-25-0880 |
59739,05 |
|
TS 91-13M |
0-25-0900 |
65105,25 |
|
TS 90-14M |
0-25-0760 |
90637,05 |
|
TS 95-16M |
1-25-0790 |
166709,90 |
|
TS 95-18M |
1-25-0800 |
197466,15 |
|
TS 95-21M |
1-25-0810 |
226222,50 |
|
TS 95-24M |
1-25-0820 |
278744,55 |
Water deferrization plants Pentair Water FBI series
WATER DEIRONIZATION INSTALLATIONS, IRON AND MANGANESE PURIFICATION WITH "FLECK" CONTROL VALVES
PURPOSE: Removing iron and manganese from water.
FILTER MATERIAL: The filter medium of natural origin BIRM is used, the granules of which are coated with a film of manganese dioxide.
CONTROL: Electromechanical timer or programmable electronic unit.
DESCRIPTION: The water deferrization installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, and a drainage and distribution system.
Iron removal filter with timed washing. BIRM filter media that does not require reagents for regeneration. The maximum permissible concentration of iron is 10 mg/l. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.
Model |
Production, m3/h |
vendor code |
price, rub. |
FBI 50-08T |
0-25-1150 |
20597,15 |
|
FBI 77-08T |
0-25-1010 |
22447,95 |
|
FBI 50-09T |
0-25-1180 |
||
FBI 77-09T |
0-25-1012 |
24003,70 |
|
FBI 50-10T |
0-25-1210 |
24377,15 |
|
FBI 77-10T |
0-25-1014 |
26227,95 |
|
FBI 50-12T |
0-25-1240 |
28754,95 |
|
FBI 77-12T |
0-25-1016 |
29935,15 |
|
FBI 77-13T |
0-25-1018 |
31865,05 |
|
FBI 77-14T |
0-25-1020 |
44142,35 |
|
FBI 77-16T |
0-25-1022 |
49348,25 |
|
FBI 28-18T |
1-25-1340 |
75045,25 |
|
FBI 28-21T |
1-25-1350 |
86594,90 |
|
FBI 31-24T |
1-25-1360 |
151130,00 |
|
FBI 31-30T |
1-25-1370 |
194944,05 |
|
FBI 31-36T |
1-25-1380 |
238837,55 |
Water deferrization filter with timer regeneration. MGS filter media with regeneration with potassium permanganate solution. The maximum permissible concentration of iron is 15 mg/l. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.
Model |
Production, m 3 / h |
vendor code |
price, rub. |
FGI 50-08T |
0-25-1500 |
27146,70 |
|
FGI 77-08T |
0-25-1400 |
28997,85 |
|
FGI 50-09T |
0-25-1520 |
29524,95 |
|
FGI 77-09T |
0-25-1402 |
31376,10 |
|
FGI 50-1 FROM |
0-25-1540 |
34157,20 |
|
FGI 77-1 FROM |
0-25-1404 |
34422,85 |
|
FGI 50-12T |
0-25-1560 |
37936,50 |
|
FGI 77-12T |
0-25-1406 |
39117,05 |
|
FGI 77-1ЗТ |
0-25-1408 |
41703,20 |
|
FGI 77-14T |
0-25-1410 |
55954,50 |
|
FGI 77-16T |
0-25-1412 |
61163,90 |
|
FGI 28-18T |
1-25-1640 |
83320,65 |
|
FGI 28-21T |
1-25-1650 |
95940,60 |
|
FGI 31-24T |
1-25-1660 |
164969,70 |
|
FGI 31-30T |
1-25-1670 |
215671,05 |
|
FGI 31-36T |
1-25-1680 |
268776,55 |
Sorption and clarification plants Pentair Water FC series
INSTALLATIONS FOR WATER PURIFICATION FROM ORGANIC COMPOUNDS AND CHLORINE WITH "FLECK" CONTROL VALVES
PURPOSE: Removing chlorine, organic compounds from water, eliminating unpleasant odor and taste.
FILTER MATERIAL: Granular Activated carbon.
FEATURES: Washing of the filter material can be carried out manually or automatically.
CONTROL: Electromechanical timer or programmable electronic unit.
BENEFITS: Highly effective removal of odor, color and dissolved organic compounds. Use over a wide pH range. High sorption capacity. Abrasion resistance.
OPERATING PRINCIPLE: Pressure filters with granular activated carbon. Organic compounds, petroleum products and chlorine are adsorbed on the granules of the filter media and are subsequently washed into the drain during backwashing. Filter with washing by timer. Loading - activated carbon. Operating pressure 2.5-6.0 bar operating temperature range +5...+37°C. 24 V, 50 Hz.
Model FC 50-08T |
Production, m 3 / h |
vendor code 0-25-1700 |
price, rub. 21185,15 |
FC 50-09T |
0-25-1710 |
23034,90 |
|
FC 50-10T |
0-25-1720 |
25553,15 |
|
FC 50-12T |
0-25-1730 |
30283,75 |
|
FC 77-1ZT |
0-25-1740 |
33629,05 |
|
FC 77-14T |
0-25-1750 |
46611,95 |
|
FC 77-16T |
0-25-1760 |
52631,25 |
|
FC 28-18T |
1-25-1770 |
79441,95 |
|
FC 28-21T |
1-25-1780 |
92801,80 |
|
FC 28-24T |
1-25-1790 |
159925,5 |
|
FC 31-30T |
1-25-1800 |
196264,25 |
|
FC 31-36T |
1-25-1810 |
235754,75 |
Sedimentation plants Pentair Water FM series
INSTALLATIONS FOR WATER PURIFICATION FROM MECHANICAL IMPURITIES WITH "FLECK" CONTROL VALVES
Manufacturer: Pentair Water, Europe
PURPOSE: Removing mechanical and organic suspensions, turbidity, sediment, rust from water.
FILTER MATERIAL: Filter-Ag - anhydrous aluminum silicate. In high-capacity installations (cylinders with a diameter greater than 14 inches), a combined load of anthracite, Filter-Ag and garnet is produced.
FEATURES: Washing of the filter material can be carried out manually or automatically. Anthracite, Filter-Ag and Garnet provide three-stage water purification, first from large contaminants, then from medium-sized impurities and, finally, from small particles.
ADVANTAGES: Low pressure losses. Due to the low weight of Filter-Ag, the volume of water required for rinsing is reduced. The high adsorption capacity of the filter material allows you to reduce the frequency of washing the installation.
CONTROL: Electromechanical timer or programmable electronic unit.
DESCRIPTION: The installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, and a drainage and distribution system.
OPERATING PRINCIPLE: Pressure filters with granular filter media. The suspension is retained in the filter media layer and is subsequently washed into the drain during backwashing.
Filter with timed washing. Loading - Filter-Ag. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.
Model FM 50-08T |
Production, m 3 / h |
vendor code 0-25-2200 |
price, rub. 18854,15 |
FM 50-09T |
0-25-2202 |
19538,40 |
|
FM 50-10T |
0-25-2205 |
20891,15 |
|
FM 50-12T |
0-25-2210 |
24223,15 |
|
FM 77-13T |
0-25-2220 |
26636,05 |
|
FM 77-14T |
0-25-2230 |
36821,75 |
|
FM 77-16T |
0-25-2240 |
42027,65 |
|
FM 28-18T |
1-25-2250 |
66509,45 |
|
FM 28-21T |
1-25-2260 |
76967,80 |
|
FM 28-24T |
1-25-2270 |
131134,50 |
|
FM 31-30T |
1-25-2280 |
172982,20 |
|
FM 31-36T |
1-25-2290 |
207114,95 |
Acidity corrector Pentair Water series FH
WATER PURIFICATION UNITS FOR ADJUSTING pH WITH "FLECK" CONTROL VALVES
PURPOSE: Increasing the pH of water and reducing the corrosive properties of water.
FILTER MATERIAL: The material used is calcite - lime granules.
FEATURES: Washing of the filter material can be carried out manually or automatically.
CONTROL: Electromechanical timer or programmable electronic unit.
DESCRIPTION: The installation consists of a housing, a control unit, a filter medium, a supporting layer of gravel, and a drainage and distribution system.
ADVANTAGES: Use in a wide pH range. High sorption capacity, abrasion resistance.
OPERATING PRINCIPLE: Pressure filters with filter media. Water entering the filter dissolves calcite, thereby increasing the pH value by no more than 1 unit.
Filter with timed washing. Download - Calcite. Operating pressure 2.5-6.0 bar, operating temperature range +5...+37°C. 24 V, 50 Hz.
Model FH 50-08T |
Production, m 3 / h |
vendor code 0-25-2500 |
price, rub. 19484,15 |
FН 50-09T |
0-25-2510 |
20483,40 |
|
FH 50-10T |
0-25-2520 |
22151,15 |
|
FH 50-12T |
0-25-2530 |
25861,15 |
|
FН 77-13T |
0-25-2540 |
28526,05 |
|
FH 77-14T |
0-25-2550 |
39467,75 |
|
FH 77-16T |
0-25-2560 |
43449,35 |
|
FH 28-18T |
1-25-8380 |
66460,45 |
|
FН 28-21T |
1-25-8390 |
74661,30 |
|
FH 28-24T |
1-25-8400 |
133045,50 |
Ultraviolet disinfectants
Manufacturer: Sterilight, Canada
Quartz lamp in a housing made of of stainless steel. Operating temperature range +2...+40° C operating pressure up to 8.6 bar. 230 V, 50 Hz.
Model |
Production, m 3 / h |
vendor code |
price, rub. |
S8Q-PA/2 |
0-25-6270 |
19953,85 |
|
S12Q-RA/2 |
1-25-6274 |
22730,40 |
|
0-25-6276 |
|||
SP600-NO with UV sensor |
2-25-6580 |
42192,50 |
|
S1Q-RA/2 |
2-25-6640 |
||
SP950-NO with UV sensor |
2-25-6650 |
47691,00 |
Household filters
Drinking water preparation system
Multi-stage drinking water preparation system. The kit can be easily installed directly under the kitchen sink.
Maximum operating pressure - 8 bar.
Contents: plastic flasks with cartridges on a connection bracket, connection pipes, sink faucet, filter wrench
Operating temperature range +2...+52°С
Reverse osmosis system
Manufacturer: Wester, England
Storage tank for filtered water with a useful capacity of 10 liters. Working pressure 2.8-6 bar
reverse osmosis membrane, sink faucet, filter wrench.
Operating temperature range +2...+40° C
Reverse osmosis system
Manufacturer: Aquafilter, USA
Multi-stage drinking water preparation system with reverse osmosis technology
Storage tank for filtered water with a useful capacity of 10 liters.
Working pressure 2.8-6 bar
Contents: plastic flasks with cartridges on a connection bracket, connection pipes, storage tank 10 l,
reverse osmosis membrane, sink faucet, filter wrench. Operating temperature range +2...+40° C
Name |
Production, l/day |
vendor code |
price, rub. |
Filter 5 stages |
190 - 250 |
0-25-5050 |
|
5th stage filter (mineralizer) |
190 - 250 |
0-25-5060 |
|
Filter 5 stages (pump booster) |
190 - 250 |
1-25-5070 |
10325,00 |
4 stage filter |
190 - 250 |
1-25-5040 |
Replacement elements for reverse osmosis systems
Manufacturer: Aquafilter, USA
Replacement elements for reverse osmosis systems 4-5 stages
Name |
vendor code |
price, rub. |
Membrane 50 GPD |
0-25-5220 |
|
Membrane 75 GPD |
0-25-5230 |
|
Membrane 100 GPD |
2-25-6010 |
|
Postfilter |
0-25-5240 |
|
Mineralizer |
0-25-5320 |
|
Booster pump |
0-25-5270 |
Wash filters
Manufacturer: BWT, Germany
Wash filters with a mesh made of polymer material. Filtration fineness 100 microns Maximum operating pressure 16 bar, temperature range +5...+30°C For HW series models, maximum operating pressure 10 bar, temperature range +5...+80°C
Name |
Productivity, m 3 /hour |
vendor code |
price, rub. |
Infinity M 3/4" (with industrial manual) |
0-25-2150 |
||
Infinity M 1" (with industrial manual) |
0-25-2152 |
||
Infinity A/T 3/4" (with automatic time delay) |
0-25-2158 |
14525,00 |
|
Infinity A/T 1" (with automatic time delay) |
0-25-2160 |
14542,00 |
|
Avanti HWS 3/4" (with manual control + reducer + check valve) |
0-25-2162 |
||
Avanti HWS 1" (with manual control + reducer + check valve) |
0-25-2164 |
||
Protector BW 1", 3/4" |
0-25-2166 |
||
Protector HW 1", 3/4" (hot water) |
0-25-2172 |
||
Infinity M 11/4" (with industrial manual) |
2-25-2600 |
||
Infinity M 11/2" (with industrial manual) |
2-25-2602 |
10489,50 |
|
Infinity M 2" (with industrial manual) |
2-25-2604 |
11140,50 |
|
Infinity M/DR 3/4" (with industrial manual + gearbox) |
2-25-2610 |
||
Infinity M/DR 1" (with industrial manual + gearbox) |
2-25-2620 |
||
Infinity A 3/4" DR (with auto industrial) |
2-25-2630 |
17166,10 |
Reagent tanks
Manufacturer: Pentair Water, Europe
Name |
vendor code |
price, rub. |
Potassium permanganate tank |
0-25-7000 |
|
Salt tank 100 l (assembled) |
0-25-7010 |
|
Salt tank 200 l (assembled) |
0-25-7020 |
|
Salt tank 300 l (assembled) |
1-25-7030 |
10769,15 |
Salt tank 300 l for 1700 (assembled) |
1-25-7040 |
16676,80 |
Salt tank 500 l for 1700 (assembled) |
1-25-7050 |
|
Cabinet shaft (assembled) |
0-25-7060 |
|
Shaft for mini-cabinet (assembled) |
0-25-8510 |
Cylinders and accessories
Name |
vendor code |
price, rub. |
Adapter |
0-25-7300 |
|
Cover 4" |
2-25-9020 |
|
Ballon 0844 |
0-25-7310 |
|
Ballon 1035 |
0-25-7320 |
|
Ballon 1054 |
0-25-7330 |
|
Ballon 1252 |
0-25-7340 |
|
Balon 1354 |
0-25-7350 |
|
Balon 1465 |
0-25-7360 |
10553,90 |
Balon 1665 |
0-25-7370 |
12543,65 |
Balon 1865 |
1-25-7380 |
18800,25 |
Balon 2160 |
1-25-7390 |
23927,75 |
Balloon 2472 |
1-25-7400 |
36532,30 |
Ballon 3072 |
1-25-8410 |
56266,70 |
Balon 3672 |
1-25-8420 |
78234,80 |
Lower distribution basket with water riser pipe 1" |
0-25-7500 |
|
Beam distributor with hydrogen. pipe 2" (for cylinder 14"-18") |
0-25-7510 |
|
Beam distributor with hydrogen. pipe 2" with adapter 50/25 (for cylinder 14"-18") |
0-25-7520 |
|
1-25-7530 |
||
Beam distributor with hydrogen. pipe 2" (for cylinder 21"-24") |
1-25-7540 |
|
Beam distributor with hydrogen. pipe 2" (for cylinder 30) |
1-25-7550 |
|
Beam distributor with hydrogen. pipe 2" (for cylinder 36) |
1-25-7560 |
FLECK control valves
Manufacturer: Pentair Water, Europe
FLECK CONTROL VALVES
Product code | Name of product | Retail price |
Electromechanical valves with timed regeneration |
||
1-25-8460 | Ex. valve FLECK 2850 1600 (IN 3/BLFC 1) | 34339,55 |
1-25-8470 | Ex. valve FLECK 2850 1700 (IN 3С/BLFC 2) | 36328,95 |
Electromechanical valves with timed flushing |
||
1-25-7640 | Ex. valve FLECK 2850 FILTRE (piston NBP) | 39818,45 |
1-25-7650 | Ex. valve FLECK 2850 FILTRE (IN -/BLFC -) | 35615,30 |
1-25-7660 | Ex. valve FLECK 3150 FILTRE (IN -/BLFC -) | 75034,05 |
1-25-7670 | Ex. valve FLECK 3150 FILTRE (piston NBP) | 79946,30 |
1-25-8480 | Ex. valve FLECK 2850 FILTRE (IN -/BLFC -) MS | 30544,85 |
Electromechanical valves with water meter regeneration |
||
1-25-8490 | Ex. valve FLECK 2850 1600 ECO (IN 3/BLFC 1) 100M3 | 57593,20 |
1-25-8450 | Ex. valve FLECK 2850 1700 1 meter (IN 4C/BLFC 2.0) | 59581,55 |
Electronic valves with timed regeneration |
||
0-25-7600 | Ex. valve FLECK 5000 1600 SE (IN 1/BLFC 0.5) | 14665,35 |
0-25-7610 | Ex. valve FLECK 5000 1600 SE (IN 2/BLFC 0.5) | 14665,35 |
2-25-9140 | Ex. valve FLECK 5000 1600 SE (IN 1/BLFC 0.5) MS | 15177,40 |
0-25-7620 | Ex. valve FLECK 7700 1600 (IN 2/BLFC 0.5) | 16974,65 |
0-25-7630 | Ex. valve FLECK 7700 1600 (IN 1/BLFC 0.25) | 16974,65 |
2-25-9160 | Ex. valve FLECK 7700 1600 (IN 3/BLFC 0.5) | 16974,65 |
Electronic valves with timed flushing |
||
0-25-7680 | Ex. valve FLECK 5000 FILTRE SE (IN -/BLFC -) | 14207,90 |
0-25-7690 | Ex. valve FLECK 7700 FILTRE (IN -/BLFC -) MS | 16516,50 |
Electronic valves with water meter regeneration |
||
0-25-7700 | Ex. valve FLECK 5000 1600 ECO SE (IN 1/BLFC 0.5) | 18869,55 |
0-25-7710 | Ex. valve FLECK 5000 1600 ECO SE (IN 2/BLFC 0.5) | 18869,55 |
0-25-7720 | Ex. valve FLECK 7700 1600 ECO (IN 1/BLFC 0.5) | 19207,65 |
0-25-7730 | Ex. valve FLECK 7700 1600 ECO (IN 2/BLFC 0.5) | 19207,65 |
2-25-9162 | Ex. valve FLECK 7700 1600 ECO (IN 3/BLFC 0.5) | 19207,65 |
0-25-7740 | Ex. valve FLECK 9000 1600 SE 3/4" (IN 3/DLFC 5/BLFC 1) | 35616,00 |
1-25-7750 | Ex. valve FLECK 9500 1600 ECO SE (IN 3/DLFC 7/BLFC 1) | 90745,55 |
1-25-7760 | Ex. valve FLECK 9500 1600 ECO SE (IN 4C/DLFC 15/BLFC 1) | 92961,05 |
1-25-7770 | Ex. valve FLECK 9500 1600 ECO SE 1" (IN 3/DLFC 10/BLFC 1) | 90874,70 |
1-25-7780 | Ex. valve FLECK 9500 1600 ECO SE 1" (IN C/DLFC 5/BLFC 2) | 92961,05 |
0-25-7790 | Ex. valve FLECK 9100 1600 ECO SE 3/4" (IN 2/DLFC 5/BLFC 1) | 29755,60 |
0-25-7800 | Ex. valve FLECK 9100 1600 ECO SE 3/4" (IN 1/DLFC 2.4/BLFC 0.5) | 29755,60 |
0-25-7810 | Ex. valve FLECK 9100 1600 ECO SE 3/4" (IN 2/DLFC 3.5/BLFC 1) | 29755,60 |
Accessories for Fleck valves
Manufacturer: Pentair Water, Europe
Name |
vendor code |
price, rub. |
Set plate for valves 5000,5600,2510,8500,9000 |
0-25-7900 |
|
Connecting pipe for twin systems 9000 (set) |
0-25-7910 |
|
Connecting pipe for twin systems 9500 (for 16" cylinder) |
1-25-7920 |
10202,15 |
Connecting pipe for twin systems 9500 (for cylinder 18-20") |
1-25-7930 |
10202,15 |
Connecting pipe for twin systems 9500 (for 24" cylinder) |
1-25-7940 |
10130,05 |
Adapter for control valve 7700 |
0-25-8080 |
RF hardness converter
Manufacturer: Termit, Russia
Electronic device for treating water against hardness deposits. It is mounted on the water return pipeline to the heating installation or on the inlet line. Pipe diameter up to 60 mm. The operating temperature range in the room is 0...+60°C. Maximum pipeline temperature +70°C. 220 V, 50 Hz, 2.0 W.
Filter media and consumables
Name |
Packing |
vendor code |
price, rub. |
BIRM - sorbent (1 l) |
0-25-8300 |
||
MGS-Greensand-sorbent (1 l) |
0-25-8320 |
||
Calcite (1 l) |
22.68 l |
0-25-8330 |
|
Quartz. gravel (1 l) |
0-25-8340 |
||
Quartz. sand (1 l) |
0-25-8350 |
||
Filter Ag (1 l) |
0-25-8360 |
||
Anthracite (1 l) |
0-25-8370 |
||
Garnet (1 l) |
0-25-8380 |
||
Granular activated carbon (1 l) |
0-25-8390 |
||
Potassium permanganate (per 1kg) |
0-25-8400 |
||
Tablet salt (1 bag) |
0-25-8410 |
||
Granion resin K001-8 Na FG (1 l) |
0-25-8420 |
||
MZhF - sorbent (1 kg) |
1-25-8320 |
||
MTM (1 l) |
2-25-9174 |
||
Filler FM-23 AMDX |
2-25-9175 |
||
Granion resin D001 Na FG (1 l) |
2-25-9176 |
||
Resin SR-1LNa (1 l) |
2-25-9180 |
Accessories and installation materials
Name |
vendor code |
price, rub. |
Air Pump AP-2 compressor |
1-25-6060 |
20309,10 |
Valve PR-25-100 |
1-25-6020 |
|
bracket |
1-25-6160 |
|
Nipple JG PI 011222 3/8ts x 1/4rn |
1-25-6130 |
|
Nipple JG CI 321214S 3/8 c x 1/2 rv |
1-25-6120 |
|
Nipple JG 3/8 SCV 3/8ts x3/8ts |
1-25-6140 |
|
Tube 3/8// (1m) |
1-25-6150 |
|
Machine. air valve S-05-P DN25 |
1-25-6040 |
|
Flow sensor for Air Pump 256-578 Flo compressor |
1-25-6266 |
|
Proportional dosing complex (assembled) |
0-25-8530 |
|
Solenoid valve 1" 24 V normally closed |
0-25-8460 |
|
Solenoid valve 1" 24 V normally open |
0-25-8470 |
|
Solenoid valve 1" 230 V normally closed |
2-25-9200 |
|
Solenoid valve 1" 230 V normally open |
2-25-9230 |
|
Aeration column head |
1-25-6155 |