How to make armored doors. Creating an impenetrable defense How to make an impenetrable one

It’s hard to believe, but the living statistics are impressive: about 85% of those suffering who seek help have problems different levels complexity and scale, we are convinced that they contain foreign negative programs, popularly called “damage”, “curse”, “evil eye”, etc. I also devoted a lot of attention to this issue, for example,

All people who have “discovered” certain symptoms negative impact from outside, they ask to supply them strong defense, despite the fact that I, like a parrot, tirelessly repeat that the most reliable and reliable method of self-defense will be: live in harmony with yourself, do not conflict with people and do not wish them harm. Be pure in thoughts, emotions, perceptions and behavioral patterns.

But since this postulate will be absorbed into human consciousness, apparently not soon), I can offer several tested and effective methods protection:

Using light as an impenetrable psychic shield

Yes, the theme “Love your enemy” probably won’t do you any good – I know, but creating an impenetrable aura for yourself from the energy of the Holy Spirit (Light and Love) is simple, easy and 100% effective.

Our Creator gave us free will. And many, alas, direct their free will to settle scores and self-affirmation through the use of force. This does not happen according to God's will - it is the will of man. The attack on you can be physical or mental. As they say, “there is no trick against scrap,” but you can deal with the mental-energetic impact. As a rule, with such an impact, the attacker’s weapon is thought forms imbued with hatred and malice, curses or witchcraft spells. The light then acts as a barrier, preventing them from entering your consciousness.

Light is energy and power. Consciousness can create light around you - it works with the power of images. And it can block all shadows and evil thoughts, protecting you like an impenetrable shield. Here's what to do if you feel like someone is trying to harm you.

Action Plan for Creating a Light Shield

1. Choose a time when no one can disturb you.

2. Relax and imagine that your body is surrounded by a bright, blinding white light. The light comes from under your feet and covers you completely, completely enclosing you. All parts of your body are protected by this unusual light.

3. Mentally turn to the light and send it your request for protection and protection from all kinds of dangers associated with the influence of evil forces. This White light is the protection of your soul.

4. Imagine how the room you are in is also gradually illuminated by this light.

5. Create an imaginary rheostat with which you can make the light even brighter.

6. Now you are in a room in which a blinding white light is shining. You feel it as a protective layer of love around you.

7. When you feel that you are more secure than ever before, turn the rheostat in the opposite direction.

8. Finish the session as usual.

Calling and turning to the light should become your daily ritual. Every day you will become stronger and soon you will feel that you have become less susceptible to influences and influences that come from outside. Strengthening your protective aura is not as difficult as it might seem at first glance. The main thing is your confidence that you can handle it.

Curses and witchcraft spells are born from the consciousness of humanity. Your mind and your consciousness can protect you from any curses, damage and mental arrows flying at you. Since you've climbed over high level consciousness, even your family members, not to mention your neighbors, colleagues and competitors, begin to see you as a certain threat. I'm not kidding!

Jealousy, envy and anger act like a curse. Even without knowing how curses or damage are sent, people who harbor feelings of jealousy, envy and anger towards you, unknowingly bring these curses on your head. These negative emotions are accompanied by destructive mental images. These destructive mental images tend to manifest themselves in the same way as any of our mental images.

You know when it happens. Your gut feeling tells you that you are making people dislike you. a certain person. You must protect yourself from his envy, otherwise you will not be able to do your job to the best of your ability. The flow of your creative energy will be reduced or blocked.

It takes no more than one or two minutes to establish such protection. It is built in your imagination when you imagine that you are surrounded by a plastic shell. Everything can pass through this artificial defense, except negative thoughts.

Negative thoughts hit protective covering and bounce back to where they came from. Soon they begin to plague the owner of these negative thoughts. And for you they will stop.

Action plan for returning the curse to the one who sent it

1. Perform relaxation.

2. Adjust your imagination, imagining that you are reliably protected from possible enemies.

3. Imagine that a plastic protective shell has formed around you.

4. Watch as the poison arrows flying at you hit the plastic and bounce back to the person who sent them.

5. End the session as usual, knowing that only good things will penetrate through your protective shell.

6. On another day, when you feel that no one is attacking you anymore, during a guided imagery session, remove this protective shell from yourself.

A curse is expressed in the desire to harm a specific person.

Any person can turn a curse on another, even involuntarily, without knowing it, but it is believed that the more power a person has, the more powerful and dangerous a curse he can create.

Also, strong curses can be created by people such as priests, priests, shamans, people with magical and witchcraft skills - witches, sorcerers and magicians, people who have no other access to justice - usually women, poor people, the disadvantaged, as well as people are dying. It is those who are already dying who are able to create the most powerful curses, investing all their remaining life energy into them.

As you know, energy can be directed by impulse. The target for this impulse can be anything: an object, a person, space, etc. You use such impulses to give love and light. Dark entities use impulses to cause some harm to others. This is called a mental-energy attack. Such attacks can be directed at various areas and systems of your body and cause quite significant harm, such as a decrease in energy potential and vibrations or the creation of connections with the infernal world.

How to protect yourself from a curse

Sometimes rituals of expulsion or protection are performed, talismans, amulets, magic oils and other ways.

There is a verified folk method protection, which is applied at night. Two onions, cut into two equal parts, should be placed in the four corners of the room where you sleep. Overnight, they will not only absorb all the bad and harmful energy that comes from outside, but will also not allow new negative forces to penetrate you. In the morning, gather the onion halves together. But remember not to touch them with your hands.The collected parts of the bulbs should be buried, or better yet, burned in order to completely destroy the evil directed at you.

There is another simple way to protect yourself from the penetration of otherworldly forces into your aura.

To do this, take a fresh egg, wash it under cold water. The water must be running. Dry it with a clean cloth or rag. On a clean egg, carefully so as not to break it, write your name with a soft graphite pencil and place it at the head of the bed on which you sleep. The egg should be positioned at the same level as your head. You can place it on your bedside table, armchair or table. The main thing is to be level with your head while sleeping. The egg should lie in this place for one week. After seven days, take an egg that has accumulated negative energy invested in your head, take it to the toilet, break it there and pour it into the toilet, not forgetting to flush it. If it happens that the egg breaks or cracks earlier, you will need to repeat the entire cleansing procedure from the beginning. The egg has unique ability intercept, absorb and extinguish negative energy, directed at you by ill-wishers.

Main by-effect when breaking a curse is that when it is broken, the energy released can transfer to the person who broke the curse if that person has not taken the proper precautions. That's why knowledgeable people It is advised not to try to remove the curse yourself, but to turn to a priest or those involved in spiritual practice.

And lastly... I don’t remember what source this method was taken from (all the practices were collected over several years and worked out by me personally), but the principle is the following: connecting to the Egregor of Protection, created by a group of mystic practitioners. Egregor wears exclusively protective functions and can neither take nor give energy to anyone or anything. Egregor receives energy from Galactic Space, performing the functions of coordinating the work of the defenses included in it.

Connecting to Egregor

So, you have decided to connect to our protective Egregor, what do you need to do for this?

A prerequisite for connection is the fact that you have taken an Oath to the Creator. Moreover, you must do this not just in your head, replacing half of the phrases with your own, but by clearly reading the text that the Creator gave us through Leonid Ivanovich Maslov (Dictation dated July 31, 2012) and do it in public. If this is not possible, then at least read the text aloud alone, turning your thoughts to the Creator. The fact of taking the Oath will protect the person himself, since the energies that the Egregor includes, and in particular the protections themselves, are very powerful, and they can harm a person who does not know how to manage them. Having taken the Oath, a person falls under the protection of the Creator, and assistance in managing these energies will be provided to him without restrictions as long as he follows the path of LIGHT. Naturally, this does not mean that the Oath must be taken in order to receive benefits in the form of connection to protection; this impulse must come from the heart.

1. A message to cleanse yourself:
“I call upon my strength and the power of I AM THAT I AM! I carry out a complete deep cleansing of my body from all its negative qualities and properties of all its bodies with the complete restoration of all its functions. AMEN!"

2. Send for installation required package programs (please note that there is a ban on copying these programs by all entities that have not taken the Oath to the Prime Creator, and without them it will not be possible to connect to Egregor, this is done to protect Egregor from the introduction of Dark entities and people unprepared for this)
“I install all the protections and programs from the “Warrior of LIGHT” package on myself while maintaining the maximum level of performance using the energy of Galactic Space.”

3. Send to connect to Egregor:
"Attention! Perform full synchronization of the protective programs installed on me with the protective programs installed on Anatoly Belyaev, Danil Dergachev, Lyubov Frolova to use the energy of their defenses to strengthen mine, at the time of attack on me, with the effect of completely restoring all my defenses to the highest possible level, using energy of Galactic Space. Om."

Creators of concrete floors have long puzzled over how to strengthen the top layers, which over time begin to emit more dust and cause cracks and chips. Today, there is a solution to this problem, and this is the creation of so-called armored floors or TOP floors, which not only restrain the destruction of concrete, giving it high performance durability, but also significantly increase the level of its mechanical strength.

Topping or armoring of floors is considered to be the process of rubbing a special mixture into a concrete surface. Thus, when creating a floor, first, rough concrete is poured, then a semi-dry screed is laid, and then reinforcing compounds are laid.

Features of laying reinforcements

Speaking about the “reservation” of concrete in more detail, we note that the laying of hardening mixtures should be done approximately an hour or two after installation of the screed, that is, immediately after the initial hardening of the concrete. Reinforcers are applied in two layers. For getting maximum effect layers should be laid perpendicular to each other. Obviously, the composition must spread evenly over the concrete surface, so that it does not turn out that the floor was leveled with a screed, but the reinforcements were distorted.

Grouting the surface

After waiting about two more hours until the strengthening mixtures dry, we move on to the next stage of this work - grouting. In general, it is better to use a special trowel for this purpose, but in hard-to-reach places you can also use a trowel. Regarding the drying of the layers, we also note that it should occur as naturally as possible, at a temperature of approximately plus 18-20 degrees. The use of hair dryers and elevated room temperatures can cause the layers to separate from each other over time, and this should not be allowed. And to lay the laminate, you need to level the concrete floor.

Advantages of concrete armoring

To justify wasting your time and money on concrete hardeners, note that the service life of such a floor is from 15 to 25 years, depending on the aggressiveness of operating conditions. We also pay attention to the fact that such a floor is able to withstand mechanical loads of up to 100 MPa. That is, when exposed to tracks of tracked vehicles, the floor will not be damaged.

Armored doors are technically complex metal structures, so their manufacturing process requires special equipment and possessing certain skills. When choosing a reliable protector for your home, you can go in several ways. The first is to purchase armored doors in a store; in this case, you will buy a standard product, during installation of which you will have to adjust the dimensions of the opening. The second way, which is also the most rational, is to order from the manufacturer. The Panther company will produce metal sheets and boxes of any complexity in accordance with required sizes and your needs.

How to make armored doors with your own hands

Another way is to make armored doors yourself. They resort to it if there is a desire to save money or produce a unique design. In any case, if you decide to do it yourself, then you will need to have specific knowledge and skills. In addition, you will need a material base - equipment, building materials and tools. If you don’t know how to make armored doors, we suggest you familiarize yourself with this quick guide. First, let's make a list of what will be needed during production:

• Steel corner
• Sheet metal, 2 mm thick or more, dimensions - no less than the doorway
• Accessories – peephole, hinges, lock, etc.
• Sheathing material - its choice depends only on your preferences for appearance doors
• Hardware, polyurethane foam
• Hammer or drill, screwdriver, screwdriver set
• Grinding machine with a set of cutting and grinding wheels
• Welding machine with electrodes

Also don't forget about measuring instruments, which include a tape measure, a corner, a building level, a ruler, etc. Accuracy in taking dimensions and transferring them to the workpiece is the key to a high-quality product. You may also need other tools and materials, the variety of which depends only on your preferences and capabilities.

Door frame production

Door frame – metal structure, to which the canvas is attached. To produce it, it is necessary to reliably take dimensions from the opening. Before starting this manipulation, the ends are cleaned. We remove all the plaster from the doorway so that the frame can be attached to a solid surface - this will increase the reliability of the entire structure.

Having taken the dimensions from the doorway, it is necessary to reduce them by 20 mm on each side to take into account possible distortions of the sides. The resulting voids can be filled polyurethane foam. Then we proceed directly to the production of the box, welding the metal corners at right angles. Compliance with perpendicularity can be checked by measuring the diagonals - they must be equal.

Fabrication

In the question of how to make armored doors, the most important component is the production of the canvas itself. To make it, you first need to assemble a metal frame. It is made from corners or profiled pipes. This design It is a rectangle, slightly smaller than a box, with several horizontal crossbars. Before welding all the components together, it is necessary to check the compliance of the dimensions by periodically placing the leaf in the door frame.

You should not forget about the future lock - for its installation it is necessary to cut out a part of the frame in the appropriate place. For this, a grinder with cutting wheels is used. After completing the production of the frame, it is necessary to mark door leaf from a metal sheet. It should be remembered that there should be a slight overlap on the box - 10mm on all sides, 15m on the lock side. Next, we weld the frame and sheet together, not only around the perimeter, but also with each horizontal jumper.

Installation of lock and hinges

The hole in the frame must be such that the lock fits into it without gaps. You will have to cut holes in the canvas using a drill or grinder for the handle and keyhole. If you install a peephole, you will also need to make an opening in the appropriate place on the sheet. It must be remembered that it is also necessary to make a hole in the box for the entry of the locking elements of the lock. However, for accuracy of execution, it is better to carry out this stage of work after installing the door on the hinges.

When choosing loops, it is necessary to take into account the total weight of the entire fabric. The greater the weight of the armored door, the more reliable and stronger the fittings should be. Hinges can be chosen as either bolted or welded. The first option involves cutting holes for mounting in the box and door frame. In the second case, it will be necessary to weld the hinges simultaneously on the canvas and the box. At first, you can fix them unreliably, then put the structure in a vertical position and check the movement of the sash. If all the gaps are equal to each other, then the hinges can be welded completely. The remaining stages of production concern finishing works, the specifics of which depend on the selected material.

Only when we realize that we are building our own destiny and there is no person on planet Earth, not even the closest and dearest, who can force us to turn away from it. But how to become such an impenetrable person who is guided only by his own will? And is it possible to do this in a world where everyone is tied to each other by hundreds of connections and obligations? Our answer is yes. You can become invulnerable in your life.

Be a creator

But, dear friend, reality, you know, is only ink blot Rorschach.
– Robert Anton Wilson –

Quantum physics has demonstrated that we have little understanding of our world. Not only do many human concepts are relative, so the Universe itself is relative. And here, it would seem, we need to think about the fact that everything is meaningless, because you cannot compete with chaos itself. But that's not true. On the contrary, you now have very, very many opportunities for - an entire infinity. But to use them, you need to become the creator of your own reality, and you can do it.

Without fear

The moment you stop worrying about what other people think of you, you will understand what freedom is. The more you achieve, the more haters, enemies, and ill-wishers you have. This is how the world works, and if you fall under the pressure of criticism and angry outbursts in your direction, then you lose. Ill-wishers always play life at a primitive level. They cannot create anything, so they try to destroy what others create. Your task is to forget that the reaction to your actions should be purely positive. Someone will always be unhappy.

Be crazy and different

Your theory is crazy, but not crazy enough to be true.
– Niels Bohr –

It just takes an enormous amount of courage to be slightly touched, considering different ideas, sometimes opposite to each other. But, nevertheless, the people who move this world forward are crazy. No, they don't have schizophrenia, they don't talk to God (but who knows for sure?), but they do things that others would never do, and their motives may be completely absurd. The main thing is that they do all this honestly.

Leave your mark on the universe

The best of the best always dream of something more than just a beautiful wife or a sports car. They want to leave behind “a dent in the universe,” as Steve Jobs once said. And this applies to everyone: great businessmen, talented artists, cunning politicians, gifted writers. Everyone wants to be more than just a successful person. Actually, if you have the highest goal in life, then why settle for anything less?

Visualize

Change your thoughts and you change your world.
– Norman Vincent Peale –

Visualization involves some kind of creation of a positive agenda that remains with you throughout your life. If you adhere to this agenda, then you become strong on the most important level - psychological. As a result, the nervous system begins to obey your will, sending positive energy on the physical level. Memory improves, overall well-being improves, and mood improves.

Exercise and the brain

Connection between physical exercise and intelligence has long been known. For example, aerobic exercise perfectly restores the “magic” substance BDNF, which, in turn, is necessary to strengthen connections between nerve cells. If you know English, you can read Dr. John Wrighty’s book on this topic, “Spark: The Revolutionary New Science of Exercise and the Brain.” We hope that someday it will be published in Russia, but for now just know that aerobic exercise makes our intellect stronger.

7. Press all the way

The question is not who will allow me, but who will stop me.
– Ayn Rand –

Let's assume that you have taken on a project that will take a certain amount of time, energy, effort, and resources. It’s not possible to calculate accurately, but multiply the expected numbers by ten, and then you will understand that you are “safe”, because time is not pushing you, and there is so much work ahead. Your stop has come - you can forget about the goal. Instead of such a train of thought, which negatively affects the process of “doing,” get into the habit of accelerating the work pace at the very beginning of the journey, so as not to prolong the process and not allow ridiculous circumstances (or yourself) to stop you.

Systematize

How to stop bullets, walk on glass, sleep on needles without any damage? It is possible to develop a superbody and other superpowers, the main thing is to know how!

To begin with, it should be said that without many years of preliminary preparation, this is life-threatening.

Fiction or real abilities?

Remember Neo from “The Matrix”, Clark Kent from “Smallville” or “Bulletproof Monk”... Yes, this is science fiction, but human abilities can truly be limitless if you develop them!

There are many known real examples such unusual possibilities. There are people who walk on hot coals, tumble on a pile of broken glass, pierce their bodies with a knife (needles, sword, etc.), catch bullets fired from firearms... At the same time, they do not experience pain and do not bleed, receive absolutely no damage.

How to develop a superbody and superhuman capabilities?

Firstly, you need to perform daily exercises to relieve the fear of pain, instill in yourself the confidence that there will be no pain.

Secondly, it is necessary to launch the processes of the biochemical mechanism when the body begins to produce endorphins² in a certain state of consciousness (gamma state). A person is in this state during arousal nervous system. Our brain waves are most active in this state.

Thirdly, you need to learn to enter a special state of mind - a state of trance³.

Fourthly, you need to do various exercises every day to improve your mind and body. It can be:

• martial arts;
• exercises for;
• exercises to develop self-confidence;
• meditation;
• breathing exercises.

Notes and feature articles for deeper understanding of the material

² Endorphins are a group of polypeptide chemical compounds similar in their mode of action to opiates (morphine-like compounds), which are naturally produced in neurons of the brain and have the ability to reduce pain and influence the emotional state (