In the game you can make several types of doors. Regarding the material, two types of doors are available - wooden and steel. As for design features, the following types of doors are available - conventional and automatic.

How to make a door in Minecraft?

To make a wooden door, you will need to find a birch block and make two planks from it, and place them in the crafting window.
To do metal door, you will need four iron ingots.

How to make an automatic door?

In all versions of Minecraft, without exception, you can make an automatic door, however, if you have a version lower than 1.2, then you need to place burning torches on the blocks. Otherwise, the methodology for creating automatic doors is as follows. To do this, you will need to place a pressure block on each side of the doorway.

It should also be remembered that the door must initially be installed in open position for it to function. You will also need to install a red stone for the door to function. After installation, you should check the door. If it functions, then everything is ready. If there are delays when opening and closing, a repeater should also be installed.

How to install a door in Minecraft.

Doors should be installed on opaque blocks, with the door facing towards you. This is necessary so that the door does not collapse and destroy the opening in which it is installed.

Properties of a door in Minecraft.

It is worth noting that a door in Minecraft is not just an object that is in the game to reflect reality. In Minecraft, this is a real participant in the gameplay. The thing is that neither villagers nor monsters can pass through the door. And also the door does not allow fire and water to pass through. In this regard, the door can be used in the game as a means of protection.

In this article I will tell you how to build a door 3 by 3 blocks. Here are all the resources you will need for construction:

Well, now that you know what you will need for construction, we can begin.

Build a 5x5 frame using any blocks. there should be a 3x3 space for the door in the middle of the frame. Now place the funnel and 3 ejectors so that they are directed as shown by the arrows in the figure. Then install a comporator and repeater (without delay). The repeater should face the ejector, and the comporator forward. For convenience, I use different colored blocks of wool (you can use other blocks).

Place 3 blocks of blue wool and place redstone on one block (as shown in the picture)

Place the redstone torch on the back of the blue wool and one block below place the blue wool and the redstone on it.

Now, as shown in the picture, place a red torch and a block of blue wool (if everything is correct, the torch will be extinguished). Then place one wool block over the red torch and redstone on it (if everything is correct, it should not be active either)

Place 3 blocks of blue wool and place redstone as shown in the picture.

Place 2 redstone torches on the side of the wool (as shown in the picture)

Now place 2 sticky pistons as shown in the picture.

Then place any block (mine is red wool) and a repeater with maximum delay delay(I forgot to set the delay in the screenshot), the repeater should be directed towards the yellow arrow.

Now place 2 sticky pistons pointing upward.

Place a repeater (aimed at the piston) with maximum delay and blocks (mine are red wool), and redstone on them.

We make an outline (frame) of our mechanical door as shown in the figure (you can use other blocks).

We place sticky pistons on the sides as shown in the picture, and place a block on the pistons (mine is blue wool).

Now we apply redstone dust along the top (as shown in the picture).

Attention: I forgot to put the 3 sticky pistons on top but I got them in at the end and that's how they should stand.

Let's put one sticky piston, put a redstone block on it, then put a block of red wool and redstone dust on it. Then we place the block of blue wool (indicated by the arrow), the piston should be activated.

Now we put a sticky piston, red wool on it, a repeater without delay, and bring the redstone to the circuit (as shown in the figure).

The scheme is almost ready. All that remains is to put the block in the dispenser (diagram 14.1) and bring the redstone to the lower left dispenser (diagram 14.2). That's all, you can bring the redstone to the button and when pressed your door will work!

Attention: Do not use levers or red torches, you need a button to activate (short pulse), also press the button very quickly otherwise the door may break. For example, you pressed the button, the door opens when it is completely open, only then can you press the button again to close it.

You can also see my video :

Compact door 3x3 blocks in Minecraft

One of the options for entering the house, the player can choose to use sliding doors in Minecraft. This will not only create an interesting mechanism, but will also speed up the process of entering and exiting the home.

To build sliding doors, you need to install the sticky pistons with their front sides facing each other at a distance of four blocks from each other. By attaching any block to them (for example, a stone), we get an opening two blocks wide. Then you need to install the same row on these pistons - pistons and stones. As a result, the future open one will be visible doorway 2x2.

Then a block of stone should be attached to the back sides of the upper pistons on both sides, and a particle of red stone should be placed under them and away from doorway- one more block of stone. You need to install a red stone particle on this block, lower it down, connect it with the already installed one, and at the level with the piston block, remove the base (earth) block and install a red torch on the lower block. This must be done on both sides of the doorway.

Then, in the direction of the doorway, you need to dig a trench already 2 blocks deep, lower particles of red stone into it, and to make a place for the entrance, install two blocks of stone directly opposite the future passage, and pressure plates on them.

If done correctly, the doors will automatically open when the player steps on the slabs.

Video guide:

Today we will talk about how to make a mechanical door in Minecraft. It opens automatically using a push mechanism. You can make such a device without much difficulty.

Materials

To solve the question of how to make a mechanical door in Minecraft, you need various components. First of all, they should be found. Here is a complete list of what is required if you need a mechanical door in Minecraft: a block to hide the wiring, a pressure plate, a repeater, a redstone torch, the material from which you plan to make the base, a sticky piston. As you can see, the list is quite large, but the result is worth the cost. Moreover, such a door is opened without touching it.

Instructions

The preparatory work has been completed, now we move on to directly solving the question of how to make a mechanical door in Minecraft. You can use it as a base various materials. We make an ordinary door out of them. After that, we step back a cage from it and place the sticky pistons vertically on each side. At the next stage, we place three wall blocks on each side of the last elements. We place them in a checkerboard order. At a depth of two cells, we connect the walls with a red stone. We lay redstone underground from the door. We connect it in this way with the central part of the previously installed red stone. To hide the redstones, we cover them with earth using a block that hides the wiring. Next we need to pay attention to the sticky pistons placed earlier. Next to them, along the edges of the existing blocks, we install redstone torches. Next, we place a couple of pressure plates in front of the door at a suitable distance. Although they can be located in any location, it depends on the character's wishes. We get the following procedure: we install walls near the sticky pistons, connect them with red stones, fixing redstone torches at the edges. In addition, we install repeaters on each side. Pressure plates are installed in a random area; the main thing is to extend the redstone branch underground. It must be connected to the main circuit. The mechanical door is now ready for use. This mechanism is very convenient.

Main element

So we figured out how to make a mechanical door. Minecraft is such a multifaceted game that even this is possible here. The design is based on a familiar element. It's about about an ordinary door. You should also be able to create it. Ordinary doors can be divided into metal and wooden. They can be created using simple materials. Wooden doors are created from various types boards There should be six of them. Place the boards in the crafting window, filling the first two rows. As a result, the item we need will appear in the cell of created things, and it can be installed in suitable place. Now you know how to make a mechanical door in Minecraft and what its features are.